Граф коммитов

359 Коммитов

Автор SHA1 Сообщение Дата
Xiao Guangrong 15096ffcea KVM: handle more completed apfs if possible
If it's no need to inject async #PF to PV guest we can handle
more completed apfs at one time, so we can retry guest #PF
as early as possible

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:01 +02:00
Takuya Yoshikawa 2653503769 KVM: replace vmalloc and memset with vzalloc
Let's use newly introduced vzalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:55 +02:00
Heiko Carstens aac8763697 KVM: get rid of warning within kvm_dev_ioctl_create_vm
Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_dev_ioctl_create_vm':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1828:10: warning: unused variable 'r'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:50 +02:00
Heiko Carstens 3bcc8a8c6c KVM: add cast within kvm_clear_guest_page to fix warning
Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_clear_guest_page':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1224:2: warning: passing argument 3 of 'kvm_write_guest_page' makes pointer from integer without a cast
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1185:5: note: expected 'const void *' but argument is of type 'long unsigned int'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:49 +02:00
Takuya Yoshikawa 6f9e5c1702 KVM: use kmalloc() for small dirty bitmaps
Currently we are using vmalloc() for all dirty bitmaps even if
they are small enough, say less than K bytes.

We use kmalloc() if dirty bitmap size is less than or equal to
PAGE_SIZE so that we can avoid vmalloc area usage for VGA.

This will also make the logging start/stop faster.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:48 +02:00
Takuya Yoshikawa 515a01279a KVM: pre-allocate one more dirty bitmap to avoid vmalloc()
Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by
vmalloc() which will be used in the next logging and this has been causing
bad effect to VGA and live-migration: vmalloc() consumes extra systime,
triggers tlb flush, etc.

This patch resolves this issue by pre-allocating one more bitmap and switching
between two bitmaps during dirty logging.

Performance improvement:
  I measured performance for the case of VGA update by trace-cmd.
  The result was 1.5 times faster than the original one.

  In the case of live migration, the improvement ratio depends on the workload
  and the guest memory size. In general, the larger the memory size is the more
  benefits we get.

Note:
  This does not change other architectures's logic but the allocation size
  becomes twice. This will increase the actual memory consumption only when
  the new size changes the number of pages allocated by vmalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:46 +02:00
Takuya Yoshikawa a36a57b1a1 KVM: introduce wrapper functions for creating/destroying dirty bitmaps
This makes it easy to change the way of allocating/freeing dirty bitmaps.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:45 +02:00
Gleb Natapov 64be500706 KVM: x86: trace "exit to userspace" event
Add tracepoint for userspace exit.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:44 +02:00
Marcelo Tosatti 612819c3c6 KVM: propagate fault r/w information to gup(), allow read-only memory
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault
to writable if host pte allows it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:28:40 +02:00
Gleb Natapov 8030089f9e KVM: improve hva_to_pfn() readability
Improve vma handling code readability in hva_to_pfn() and fix
async pf handling code to properly check vma returned by find_vma().

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:23 +02:00
Gleb Natapov 7c90705bf2 KVM: Inject asynchronous page fault into a PV guest if page is swapped out.
Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.

Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.

Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:17 +02:00
Gleb Natapov 344d9588a9 KVM: Add PV MSR to enable asynchronous page faults delivery.
Guest enables async PF vcpu functionality using this MSR.

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:12 +02:00
Gleb Natapov 49c7754ce5 KVM: Add memory slot versioning and use it to provide fast guest write interface
Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:08 +02:00
Gleb Natapov 56028d0861 KVM: Retry fault before vmentry
When page is swapped in it is mapped into guest memory only after guest
tries to access it again and generate another fault. To save this fault
we can map it immediately since we know that guest is going to access
the page. Do it only when tdp is enabled for now. Shadow paging case is
more complicated. CR[034] and EFER registers should be switched before
doing mapping and then switched back.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:06 +02:00
Gleb Natapov af585b921e KVM: Halt vcpu if page it tries to access is swapped out
If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.

Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.

[avi: remove call to get_user_pages_noio(), nacked by Linus; this
      makes everything synchrnous again]

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:21:39 +02:00
Linus Torvalds 1765a1fe5d Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits)
  KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
  KVM: Fix signature of kvm_iommu_map_pages stub
  KVM: MCE: Send SRAR SIGBUS directly
  KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED
  KVM: fix typo in copyright notice
  KVM: Disable interrupts around get_kernel_ns()
  KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address
  KVM: MMU: move access code parsing to FNAME(walk_addr) function
  KVM: MMU: audit: check whether have unsync sps after root sync
  KVM: MMU: audit: introduce audit_printk to cleanup audit code
  KVM: MMU: audit: unregister audit tracepoints before module unloaded
  KVM: MMU: audit: fix vcpu's spte walking
  KVM: MMU: set access bit for direct mapping
  KVM: MMU: cleanup for error mask set while walk guest page table
  KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
  KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
  KVM: x86: Fix constant type in kvm_get_time_scale
  KVM: VMX: Add AX to list of registers clobbered by guest switch
  KVM guest: Move a printk that's using the clock before it's ready
  KVM: x86: TSC catchup mode
  ...
2010-10-24 12:47:25 -07:00
Jan Kiszka 2a31339aa0 KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
We also have to call kvm_iommu_map_pages for CONFIG_AMD_IOMMU. So drop
the dependency on Intel IOMMU, kvm_iommu_map_pages will be a nop anyway
if CONFIG_IOMMU_API is not defined.

KVM-Stable-Tag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:15 +02:00
Nicolas Kaiser 9611c18777 KVM: fix typo in copyright notice
Fix typo in copyright notice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:14 +02:00
Avi Kivity 624d84cfe6 KVM: cpu_relax() during spin waiting for reboot
It doesn't really matter, but if we spin, we should spin in a more relaxed
manner.  This way, if something goes wrong at least it won't contribute to
global warming.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:03 +02:00
Xiao Guangrong 365fb3fdf6 KVM: MMU: rewrite audit_mappings_page() function
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).

This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()

And it adds 'notrap' ptes check in unsync/direct sps

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:48 +02:00
Xiao Guangrong 48987781eb KVM: MMU: introduce gfn_to_page_many_atomic() function
Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Xiao Guangrong 887c08ac19 KVM: MMU: introduce hva_to_pfn_atomic function
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Zachary Amsden ca84d1a24c KVM: x86: Add clock sync request to hardware enable
If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.

This covers both cases.

Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).

Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.

Updated: implement better locking semantics for hardware_enable

Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called.  The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Avi Kivity ca242ac996 KVM: Fix reboot on Intel hosts
When we reboot, we disable vmx extensions or otherwise INIT gets blocked.
If a task on another cpu hits a vmx instruction, it will fault if vmx is
disabled.  We trap that to avoid a nasty oops and spin until the reboot
completes.

Problem is, we sleep with interrupts disabled.  This blocks smp_send_stop()
from running, and the reboot process halts.

Fix by enabling interrupts before spinning.

KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-23 11:31:56 -03:00
Michael S. Tsirkin 6bbfb26531 KVM: fix irqfd assign/deassign race
I think I see the following (theoretical) race:

During irqfd assign, we drop irqfds lock before we
schedule inject work. Therefore, deassign running
on another CPU could cause shutdown and flush to run
before inject, causing user after free in inject.

A simple fix it to schedule inject under the lock.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-23 11:31:51 -03:00
Zachary Amsden da908f2fb4 KVM: x86: Perform hardware_enable in CPU_STARTING callback
The CPU_STARTING callback was added upstream with the intention
of being used for KVM, specifically for the hardware enablement
that must be done before we can run in hardware virt.  It had
bugs on the x86_64 architecture at the time, where it was called
after CPU_ONLINE.  The arches have since merged and the bug is
gone.

It might be noted other features should probably start making
use of this callback; microcode updates in particular which
might be fixing important erratums would be best applied before
beginning to run user tasks.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-09 13:48:16 -03:00
Gleb Natapov 4a994358b9 KVM: Convert mask notifiers to use irqchip/pin instead of gsi
Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:39 +03:00
Gleb Natapov edba23e515 KVM: Return EFAULT from kvm ioctl when guest accesses bad area
Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:33 +03:00
Gleb Natapov fa7bff8f8a KVM: define hwpoison variables static
They are not used outside of the file.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:32 +03:00
Joerg Roedel 5689cc53fa KVM: Use u64 for frame data types
For 32bit machines where the physical address width is
larger than the virtual address width the frame number types
in KVM may overflow. Fix this by changing them to u64.

[sfr: fix build on 32-bit ppc]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:39:44 +03:00
Joerg Roedel 828554136b KVM: Remove unnecessary divide operations
This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:30 +03:00
Sheng Yang 95c87e2b44 KVM: Fix IOMMU memslot reference warning
This patch fixes the following warning.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:259 invoked rcu_dereference_check() without
protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
no locks held by qemu-system-x86/29679.

stack backtrace:
Pid: 29679, comm: qemu-system-x86 Not tainted 2.6.35-rc3+ #200
Call Trace:
 [<ffffffff810a224e>] lockdep_rcu_dereference+0xa8/0xb1
 [<ffffffffa018a06f>] kvm_iommu_unmap_memslots+0xc9/0xde [kvm]
 [<ffffffffa018a0c4>] kvm_iommu_unmap_guest+0x40/0x4e [kvm]
 [<ffffffffa018f772>] kvm_arch_destroy_vm+0x1a/0x186 [kvm]
 [<ffffffffa01800d0>] kvm_put_kvm+0x110/0x167 [kvm]
 [<ffffffffa0180ecc>] kvm_vcpu_release+0x18/0x1c [kvm]
 [<ffffffff81156f5d>] fput+0x22a/0x3a0
 [<ffffffff81152288>] filp_close+0xb4/0xcd
 [<ffffffff8106599f>] put_files_struct+0x1b7/0x36b
 [<ffffffff81065830>] ? put_files_struct+0x48/0x36b
 [<ffffffff8131ee59>] ? do_raw_spin_unlock+0x118/0x160
 [<ffffffff81065bc0>] exit_files+0x6d/0x75
 [<ffffffff81068348>] do_exit+0x47d/0xc60
 [<ffffffff8177e7b5>] ? _raw_spin_unlock_irq+0x30/0x36
 [<ffffffff81068bfa>] do_group_exit+0xcf/0x134
 [<ffffffff81080790>] get_signal_to_deliver+0x732/0x81d
 [<ffffffff81095996>] ? cpu_clock+0x4e/0x60
 [<ffffffff81002082>] do_notify_resume+0x117/0xc43
 [<ffffffff810a2fa3>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81080d79>] ? sys_rt_sigtimedwait+0x2b5/0x3bf
 [<ffffffff8177d9f2>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff81003221>] ? sysret_signal+0x5/0x3d
 [<ffffffff8100343b>] int_signal+0x12/0x17

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:29 +03:00
Huang Ying bbeb34062f KVM: Fix a race condition for usage of is_hwpoison_address()
is_hwpoison_address accesses the page table, so the caller must hold
current->mm->mmap_sem in read mode. So fix its usage in hva_to_pfn of
kvm accordingly.

Comment is_hwpoison_address to remind other users.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:11 +03:00
Avi Kivity e36d96f7cf KVM: Keep slot ID in memory slot structure
May be used for distinguishing between internal and user slots, or for sorting
slots in size order.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:07 +03:00
Avi Kivity a8eeb04a44 KVM: Add mini-API for vcpu->requests
Makes it a little more readable and hackable.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:05 +03:00
Avi Kivity a1f4d39500 KVM: Remove memory alias support
As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:00 +03:00
Chris Lalancette aefd18f01e KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's
Otherwise we might try to deliver a timer interrupt to a cpu that
can't possibly handle it.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:51 +03:00
Andi Kleen a24e809902 KVM: Fix unused but set warnings
No real bugs in this one.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:29 +03:00
Andi Kleen 376d41ff26 KVM: Fix KVM_SET_SIGNAL_MASK with arg == NULL
When the user passed in a NULL mask pass this on from the ioctl
handler.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:28 +03:00
Lai Jiangshan 3bd89007ab KVM: cleanup "*new.rmap" type
The type of '*new.rmap' is not 'struct page *', fix it

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:39:25 +03:00
Avi Kivity 221d059d15 KVM: Update Red Hat copyrights
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:51 +03:00
Avi Kivity 9373662463 KVM: Consolidate arch specific vcpu ioctl locking
Now that all arch specific ioctls have centralized locking, it is easy to
move it to the central dispatcher.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:48 +03:00
Avi Kivity 2122ff5eab KVM: move vcpu locking to dispatcher for generic vcpu ioctls
All vcpu ioctls need to be locked, so instead of locking each one specifically
we lock at the generic dispatcher.

This patch only updates generic ioctls and leaves arch specific ioctls alone.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:47 +03:00
Alex Williamson 48bb09eee4 KVM: remove CAP_SYS_RAWIO requirement from kvm_vm_ioctl_assign_irq
Remove this check in an effort to allow kvm guests to run without
root privileges.  This capability check doesn't seem to add any
security since the device needs to have already been added via the
assign device ioctl and the io actually occurs through the pci
sysfs interface.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:35:45 +03:00
Huang Ying bf998156d2 KVM: Avoid killing userspace through guest SRAO MCE on unmapped pages
In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.

But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.

The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.

To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.

[xiao: fix warning introduced by avi]

Reported-by: Max Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:26 +03:00
Marcelo Tosatti 07dc7263b9 KVM: read apic->irr with ioapic lock held
Read ioapic->irr inside ioapic->lock protected section.

KVM-Stable-Tag
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-06-10 20:29:03 +03:00
Jan Kiszka 05b782ab95 KVM: Fix order passed to iommu_unmap
This is obviously a left-over from the the old interface taking the
size. Apparently a mostly harmless issue with the current iommu_unmap
implementation.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09 18:48:38 +03:00
Linus Torvalds 98edb6ca41 Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits)
  KVM: x86: Add missing locking to arch specific vcpu ioctls
  KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls
  KVM: MMU: Segregate shadow pages with different cr0.wp
  KVM: x86: Check LMA bit before set_efer
  KVM: Don't allow lmsw to clear cr0.pe
  KVM: Add cpuid.txt file
  KVM: x86: Tell the guest we'll warn it about tsc stability
  x86, paravirt: don't compute pvclock adjustments if we trust the tsc
  x86: KVM guest: Try using new kvm clock msrs
  KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
  KVM: x86: add new KVMCLOCK cpuid feature
  KVM: x86: change msr numbers for kvmclock
  x86, paravirt: Add a global synchronization point for pvclock
  x86, paravirt: Enable pvclock flags in vcpu_time_info structure
  KVM: x86: Inject #GP with the right rip on efer writes
  KVM: SVM: Don't allow nested guest to VMMCALL into host
  KVM: x86: Fix exception reinjection forced to true
  KVM: Fix wallclock version writing race
  KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
  KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
  ...
2010-05-21 17:16:21 -07:00
Avi Kivity 0ee75bead8 KVM: Let vcpu structure alignment be determined at runtime
vmx and svm vcpus have different contents and therefore may have different
alignmment requirements.  Let each specify its required alignment.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:29 +03:00
Linus Torvalds 8123d8f17d Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Add amd_iommu=off command line option
  iommu-api: Remove iommu_{un}map_range functions
  x86/amd-iommu: Implement ->{un}map callbacks for iommu-api
  x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes
  x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes
  x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes
  kvm: Change kvm_iommu_map_pages to map large pages
  VT-d: Change {un}map_range functions to implement {un}map interface
  iommu-api: Add ->{un}map callbacks to iommu_ops
  iommu-api: Add iommu_map and iommu_unmap functions
  iommu-api: Rename ->{un}map function pointers to ->{un}map_range
2010-05-18 07:22:37 -07:00
Takuya Yoshikawa d14769377a KVM: Remove test-before-set optimization for dirty bits
As Avi pointed out, testing bit part in mark_page_dirty() was important
in the days of shadow paging, but currently EPT and NPT has already become
common and the chance of faulting a page more that once per iteration is
small. So let's remove the test bit to avoid extra access.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:13 +03:00
Lai Jiangshan 66cbff59a1 KVM: do not call hardware_disable() on CPU_UP_CANCELED
When CPU_UP_CANCELED, hardware_enable() has not been called at the CPU
which is going up because raw_notifier_call_chain(CPU_ONLINE)
has not been called for this cpu.

Drop the handling for CPU_UP_CANCELED.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:04 +03:00
Lai Jiangshan 90d83dc3d4 KVM: use the correct RCU API for PROVE_RCU=y
The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:01 +03:00
Takuya Yoshikawa 660c22c425 KVM: limit the number of pages per memory slot
This patch limits the number of pages per memory slot to make
us free from extra care about type issues.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:41 +03:00
Takuya Yoshikawa 6ce5a090a9 KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s error handling
kvm_coalesced_mmio_init() keeps to hold the addresses of a coalesced
mmio ring page and dev even after it has freed them.

Also, if this function fails, though it might be rare, it seems to be
suggesting the system's serious state: so we'd better stop the works
following the kvm_creat_vm().

This patch clears these problems.

  We move the coalesced mmio's initialization out of kvm_create_vm().
  This seems to be natural because it includes a registration which
  can be done only when vm is successfully created.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:53 +03:00
jing zhang d57e2c0740 KVM: fix assigned_device_enable_host_msix error handling
Free IRQ's and disable MSIX upon failure.

Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Jing Zhang <zj.barak@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:36 +03:00
Wei Yongjun a87fa35514 KVM: fix the errno of ioctl KVM_[UN]REGISTER_COALESCED_MMIO failure
This patch change the errno of ioctl KVM_[UN]REGISTER_COALESCED_MMIO
from -EINVAL to -ENXIO if no coalesced mmio dev exists.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:34 +03:00
Xiao Guangrong 2ed152afc7 KVM: cleanup kvm trace
This patch does:

 - no need call tracepoint_synchronize_unregister() when kvm module
   is unloaded since ftrace can handle it

 - cleanup ftrace's macro

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:15:22 +03:00
Marcelo Tosatti 46a47b1ed1 KVM: convert ioapic lock to spinlock
kvm_set_irq is used from non sleepable contexes, so convert ioapic from
mutex to spinlock.

KVM-Stable-Tag.
Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13 01:23:55 -03:00
Joerg Roedel 795e74f7a6 Merge branch 'iommu/largepages' into amd-iommu/2.6.35
Conflicts:
	arch/x86/kernel/amd_iommu.c
2010-05-11 17:40:57 +02:00
Takuya Yoshikawa f5c9803173 KVM: update gfn_to_hva() to use gfn_to_hva_memslot()
Marcelo introduced gfn_to_hva_memslot() when he implemented
gfn_to_pfn_memslot(). Let's use this for gfn_to_hva() too.

Note: also remove parentheses next to return as checkpatch said to do.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:29 +03:00
Lai Jiangshan eda2beda83 KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release()
I got this dmesg due to srcu_read_lock() is missing in
kvm_mmu_notifier_release().

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/x86.h:72 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/3100:
 #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff810d73dc>] __mmu_notifier_release+0x38/0xdf
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa0130a6a>] kvm_mmu_zap_all+0x21/0x5e [kvm]

stack backtrace:
Pid: 3100, comm: qemu-system-x86 Not tainted 2.6.34-rc3-22949-gbc8a97a-dirty #2
Call Trace:
 [<ffffffff8106afd9>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa0123a89>] unalias_gfn+0x56/0xab [kvm]
 [<ffffffffa0119600>] gfn_to_memslot+0x16/0x25 [kvm]
 [<ffffffffa012ffca>] gfn_to_rmap+0x17/0x6e [kvm]
 [<ffffffffa01300c1>] rmap_remove+0xa0/0x19d [kvm]
 [<ffffffffa0130649>] kvm_mmu_zap_page+0x109/0x34d [kvm]
 [<ffffffffa0130a7e>] kvm_mmu_zap_all+0x35/0x5e [kvm]
 [<ffffffffa0122870>] kvm_arch_flush_shadow+0x16/0x22 [kvm]
 [<ffffffffa01189e0>] kvm_mmu_notifier_release+0x15/0x17 [kvm]
 [<ffffffff810d742c>] __mmu_notifier_release+0x88/0xdf
 [<ffffffff810d73dc>] ? __mmu_notifier_release+0x38/0xdf
 [<ffffffff81040848>] ? exit_mm+0xe0/0x115
 [<ffffffff810c2cb0>] exit_mmap+0x2c/0x17e
 [<ffffffff8103c472>] mmput+0x2d/0xd4
 [<ffffffff81040870>] exit_mm+0x108/0x115
[...]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-21 11:17:43 +03:00
Takuya Yoshikawa 87bf6e7de1 KVM: fix the handling of dirty bitmaps to avoid overflows
Int is not long enough to store the size of a dirty bitmap.

This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.

Note: in mark_page_dirty(), we have to consider the fact that
  __set_bit() takes the offset as int, not long.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20 13:06:55 +03:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Joerg Roedel fcd95807fb kvm: Change kvm_iommu_map_pages to map large pages
This patch changes the implementation of of
kvm_iommu_map_pages to map the pages with the host page size
into the io virtual address space.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-By: Avi Kivity <avi@redhat.com>
2010-03-07 18:01:11 +01:00
Avi Kivity 70e335e168 KVM: Convert kvm->requests_lock to raw_spinlock_t
The code relies on kvm->requests_lock inhibiting preemption.

Noted by Jan Kiszka.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:13 -03:00
Michael S. Tsirkin 8b97fb0fcb KVM: do not store wqh in irqfd
wqh is unused, so we do not need to store it in irqfd anymore

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Wei Yongjun 72bb2fcd23 KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrl
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Wei Yongjun 1ae77badc2 KVM: kvm->arch.vioapic should be NULL if kvm_ioapic_init() failure
kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:09 -03:00
Jochen Maes 43db669730 KVM: Fix Codestyle in virt/kvm/coalesced_mmio.c
Fixed 2 codestyle issues in virt/kvm/coalesced_mmio.c

Signed-off-by: Jochen Maes <jochen.maes@sejo.be>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:09 -03:00
Joerg Roedel 8f0b1ab6fb KVM: Introduce kvm_host_page_size
This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:08 -03:00
Zhai, Edwin ab9f4ecbb6 KVM: enable PCI multiple-segments for pass-through device
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:06 -03:00
Sheng Yang f0f4b93090 KVM: Fix kvm_coalesced_mmio_ring duplicate allocation
The commit 0953ca73 "KVM: Simplify coalesced mmio initialization"
allocate kvm_coalesced_mmio_ring in the kvm_coalesced_mmio_init(), but
didn't discard the original allocation...

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:03 -03:00
Marcelo Tosatti 6474920477 KVM: fix cleanup_srcu_struct on vm destruction
cleanup_srcu_struct on VM destruction remains broken:

BUG: unable to handle kernel paging request at ffffffffffffffff
IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
RIP: 0010:[<ffffffff802533d2>]  [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
Call Trace:
 [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm]
 [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm]
 [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel]
 [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm]
 [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm]

Move it to kvm_arch_destroy_vm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-03-01 12:36:01 -03:00
Avi Kivity 46a929bc15 KVM: avoid taking ioapic mutex for non-ioapic EOIs
When the guest acknowledges an interrupt, it sends an EOI message to the local
apic, which broadcasts it to the ioapic.  To handle the EOI, we need to take
the ioapic mutex.

On large guests, this causes a lot of contention on this mutex.  Since large
guests usually don't route interrupts via the ioapic (they use msi instead),
this is completely unnecessary.

Avoid taking the mutex by introducing a handled_vectors bitmap.  Before taking
the mutex, check if the ioapic was actually responsible for the acked vector.
If not, we can return early.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:46 -03:00
Marcelo Tosatti 79fac95ecf KVM: convert slots_lock to a mutex
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti e93f8a0f82 KVM: convert io_bus to SRCU
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti a983fb2387 KVM: x86: switch kvm_set_memory_alias to SRCU update
Using a similar two-step procedure as for memslots.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti bc6678a33d KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU update
Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti 3ad26d8139 KVM: use gfn_to_pfn_memslot in kvm_iommu_map_pages
So its possible to iommu map a memslot before making it visible to
kvm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti 506f0d6f9c KVM: introduce gfn_to_pfn_memslot
Which takes a memslot pointer instead of using kvm->memslots.

To be used by SRCU convertion later.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti f7784b8ec9 KVM: split kvm_arch_set_memory_region into prepare and commit
Required for SRCU convertion later.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti 46a26bf557 KVM: modify memslots layout in struct kvm
Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:43 -03:00
Avi Kivity 980da6ce57 KVM: Simplify coalesced mmio initialization
- add destructor function
- move related allocation into constructor
- add stubs for !CONFIG_KVM_MMIO

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity 50eb2a3cd0 KVM: Add KVM_MMIO kconfig item
s390 doesn't have mmio, this will simplify ifdefing it out.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity 4c07b0a4b6 KVM: Remove ifdefs from mmu notifier initialization
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity 3f0852e0ac KVM: Add include guards for coalesced_mmio.h
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity 283d0c65e4 KVM: Disentangle mmu notifiers and coalesced_mmio registration
They aren't related.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Michael S. Tsirkin b6a114d272 KVM: fix spurious interrupt with irqfd
kvm didn't clear irqfd counter on deassign, as a result we could get a
spurious interrupt when irqfd is assigned back. this leads to poor
performance and, in theory, guest crash.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:39 -02:00
Marcelo Tosatti d72118ceca KVM: properly check max PIC pin in irq route setup
Otherwise memory beyond irq_states[16] might be accessed.

Noticed by Juan Quintela.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:38 -02:00
Michael S. Tsirkin f1d1c309f3 KVM: only allow one gsi per fd
Looks like repeatedly binding same fd to multiple gsi's with irqfd can
use up a ton of kernel memory for irqfd structures.

A simple fix is to allow each fd to only trigger one gsi: triggering a
storm of interrupts in guest is likely useless anyway, and we can do it
by binding a single gsi to many interrupts if we really want to.

Cc: stable@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:37 -02:00
Heiko Carstens b4329db0d7 KVM: get rid of kvm_create_vm() unused label warning on s390
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_create_vm':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:409: warning: label 'out_err' defined but not used

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-27 13:36:34 -02:00
Sheng Yang fae3a3536a KVM: Fix possible circular locking in kvm_vm_ioctl_assign_device()
One possible order is:

KVM_CREATE_IRQCHIP ioctl(took kvm->lock) -> kvm_iobus_register_dev() ->
down_write(kvm->slots_lock).

The other one is in kvm_vm_ioctl_assign_device(), which take kvm->slots_lock
first, then kvm->lock.

Update the comment of lock order as well.

Observe it due to kernel locking debug warnings.

Cc: stable@kernel.org
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-27 13:36:31 -02:00
Roland Dreier 628ff7c1d8 anonfd: Allow making anon files read-only
It seems a couple places such as arch/ia64/kernel/perfmon.c and
drivers/infiniband/core/uverbs_main.c could use anon_inode_getfile()
instead of a private pseudo-fs + alloc_file(), if only there were a way
to get a read-only file.  So provide this by having anon_inode_getfile()
create a read-only file if we pass O_RDONLY in flags.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-22 12:27:34 -05:00
Benjamin Herrenschmidt bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Avi Kivity a9c7399d6c KVM: Allow internal errors reported to userspace to carry extra data
Usually userspace will freeze the guest so we can inspect it, but some
internal state is not available.  Add extra data to internal error
reporting so we can expose it to the debugger.  Extra data is specific
to the suberror.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:24 +02:00
Marcelo Tosatti e50212bb51 KVM: only clear irq_source_id if irqchip is present
Otherwise kvm might attempt to dereference a NULL pointer.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:23 +02:00
Arnd Bergmann 6ff5894cdf KVM: Enable 32bit dirty log pointers on 64bit host
With big endian userspace, we can't quite figure out if a pointer
is 32 bit (shifted >> 32) or 64 bit when we read a 64 bit pointer.

This is what happens with dirty logging. To get the pointer interpreted
correctly, we thus need Arnd's patch to implement a compat layer for
the ioctl:

A better way to do this is to add a separate compat_ioctl() method that
converts this for you.

Based on initial patch from Arnd Bergmann.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:20 +02:00