In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
- New Features:
- Better client responsiveness when server isn't replying
- Use refcount_t in sunrpc rpc_client refcount tracking
- Add srcaddr and dst_port to the sunrpc sysfs info files
- Add basic support for connection sharing between servers with multiple NICs`
- Bugfixes and Cleanups:
- Sunrpc tracepoint cleanups
- Disconnect after ib_post_send() errors to avoid deadlocks
- Fix for tearing down rpcrdma_reps
- Fix a potential pNFS layoutget livelock loop
- pNFS layout barrier fixes
- Fix a potential memory corruption in rpc_wake_up_queued_task_set_status()
- Fix reconnection locking
- Fix return value of get_srcport()
- Remove rpcrdma_post_sends()
- Remove pNFS dead code
- Remove copy size restriction for inter-server copies
- Overhaul the NFS callback service
- Clean up sunrpc TCP socket shutdowns
- Always provide aligned buffers to RPC read layers
-----BEGIN PGP SIGNATURE-----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=Ad/3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Better client responsiveness when server isn't replying
- Use refcount_t in sunrpc rpc_client refcount tracking
- Add srcaddr and dst_port to the sunrpc sysfs info files
- Add basic support for connection sharing between servers with multiple NICs`
Bugfixes and Cleanups:
- Sunrpc tracepoint cleanups
- Disconnect after ib_post_send() errors to avoid deadlocks
- Fix for tearing down rpcrdma_reps
- Fix a potential pNFS layoutget livelock loop
- pNFS layout barrier fixes
- Fix a potential memory corruption in rpc_wake_up_queued_task_set_status()
- Fix reconnection locking
- Fix return value of get_srcport()
- Remove rpcrdma_post_sends()
- Remove pNFS dead code
- Remove copy size restriction for inter-server copies
- Overhaul the NFS callback service
- Clean up sunrpc TCP socket shutdowns
- Always provide aligned buffers to RPC read layers"
* tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (39 commits)
NFS: Always provide aligned buffers to the RPC read layers
NFSv4.1 add network transport when session trunking is detected
SUNRPC enforce creation of no more than max_connect xprts
NFSv4 introduce max_connect mount options
SUNRPC add xps_nunique_destaddr_xprts to xprt_switch_info in sysfs
SUNRPC keep track of number of transports to unique addresses
NFSv3: Delete duplicate judgement in nfs3_async_handle_jukebox
SUNRPC: Tweak TCP socket shutdown in the RPC client
SUNRPC: Simplify socket shutdown when not reusing TCP ports
NFSv4.2: remove restriction of copy size for inter-server copy.
NFS: Clean up the synopsis of callback process_op()
NFS: Extract the xdr_init_encode/decode() calls from decode_compound
NFS: Remove unused callback void decoder
NFS: Add a private local dispatcher for NFSv4 callback operations
SUNRPC: Eliminate the RQ_AUTHERR flag
SUNRPC: Set rq_auth_stat in the pg_authenticate() callout
SUNRPC: Add svc_rqst::rq_auth_stat
SUNRPC: Add dst_port to the sysfs xprt info file
SUNRPC: Add srcaddr as a file in sysfs
sunrpc: Fix return value of get_srcport()
...
If ndr->length is smaller than expected size, ksmbd can access invalid
access in ndr->data. This patch add validation to check ndr->offset is
over ndr->length. and added exception handling to check return value of
ndr read/write function.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_file_table_flush is a leftover from SMB1. This function is no longer
needed as SMB1 has been removed from ksmbd.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Becase smb direct header is mapped and msg->num_sge
already is incremented, the decrement should be
removed from the condition.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This log happens on servers with a network bridge since
the bridge does not have a specified link speed.
This is not a real error so change the error log to debug instead.
Signed-off-by: Per Forlin <perfn@axis.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When ownership is changed we might in certain scenarios loose the
ability to alter the inode after we changed ownership. This can e.g.
happen when we are on an idmapped mount where uid 0 is mapped to uid
1000 and uid 1000 is mapped to uid 0.
A caller with fs*id 1000 will be able to create files as *id 1000 on
disk. They will also be able to change ownership of files owned by *id 0
to *id 1000 but they won't be able to change ownership in the other
direction. This means acl operations following notify_change() would
fail. Move the notify_change() call after the acls have been updated.
This guarantees that we don't end up with spurious "hash value diff"
warnings later on because we managed to change ownership but didn't
manage to alter acls.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Permission checking and copying over ownership information is the task
of the underlying filesystem not ksmbd. The order is also wrong here.
This modifies the inode before notify_change(). If notify_change() fails
this will have changed ownership nonetheless. All of this is unnecessary
though since the underlying filesystem's ->setattr handler will do all
this (if required) by itself.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It seems the error was accidently ignored until now. Make sure it is
surfaced.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sid_to_id() helper encodes raw ownership information suitable for
s*id handling. This is conceptually equivalent to reporting ownership
information via stat to userspace. In this case the consumer is ksmbd
instead of a regular user. So when encoding raw ownership information
suitable for s*id handling later we need to map the id up according to
the user namespace of ksmbd itself taking any idmapped mounts into
account.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sid_to_id() functions is relevant when changing ownership of
filesystem objects based on acl information. In this case we need to
first translate the relevant s*ids into k*ids in ksmbd's user namespace
and account for any idmapped mounts. Requesting a change in ownership
requires the inverse translation to be applied when we would report
ownership to userspace. So k*id_from_mnt() must be used here.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not obvious why subauth 0 would be excluded from translation. This
would lead to wrong results whenever a non-identity idmapping is used.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ksmbd server performs translation of posix acls to smb acls.
Currently the translation is wrong since the idmapping of the mount is
used to map the ids into raw userspace ids but what is relevant is the
user namespace of ksmbd itself. The user namespace of ksmbd itself which
is the initial user namespace. The operation is similar to asking "What
*ids would a userspace process see given that k*id in the relevant user
namespace?". Before the final translation we need to apply the idmapping
of the mount in case any is used. Add two simple helpers for ksmbd.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When creating new filesystem objects ksmbd translates between k*ids and
s*ids. For this it often uses struct smb_fattr and stashes the k*ids in
cf_uid and cf_gid. Let cf_uid and cf_gid always contain the final
information taking any potential idmapped mounts into account. When
finally translation cf_*id into s*ids translate them into the user
namespace of ksmbd since that is the relevant user namespace here.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When transferring ownership information to the client the k*ids are
translated into raw *ids before they are sent over the wire. The
function currently erroneously translates the k*ids according to the
mount's idmapping. Instead, reporting the owning *ids to userspace the
underlying k*ids need to be mapped up in the caller's user namespace.
This is how stat() works.
The caller in this instance is ksmbd itself and ksmbd always runs in the
initial user namespace. Translate according to that taking any potential
idmapped mounts into account.
Switch to from_k*id_munged() which ensures that the overflow*id is
returned instead of the (*id_t)-1 when the k*id can't be translated.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When transferring ownership information to the
client the k*ids are translated into raw *ids before they are sent over
the wire. The function currently erroneously translates the k*ids
according to the mount's idmapping. Instead, reporting the owning *ids
to userspace the underlying k*ids need to be mapped up in the caller's
user namespace. This is how stat() works.
The caller in this instance is ksmbd itself and ksmbd always runs in the
initial user namespace. Translate according to that.
The idmapping of the mount is already taken into account by the lower
filesystem and so kstat->*id will contain the mapped k*ids.
Switch to from_k*id_munged() which ensures that the overflow*id is
returned instead of the (*id_t)-1 when the k*id can't be translated.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's great that the new in-kernel ksmbd server will support idmapped
mounts out of the box! However, lookup is currently broken. Lookup
helpers such as lookup_one_len() call inode_permission() internally to
ensure that the caller is privileged over the inode of the base dentry
they are trying to lookup under. So the permission checking here is
currently wrong.
Linux v5.15 will gain a new lookup helper lookup_one() that does take
idmappings into account. I've added it as part of my patch series to
make btrfs support idmapped mounts. The new helper is in linux-next as
part of David's (Sterba) btrfs for-next branch as commit
c972214c133b ("namei: add mapping aware lookup helper").
I've said it before during one of my first reviews: I would very much
recommend adding fstests to [1]. It already seems to have very
rudimentary cifs support. There is a completely generic idmapped mount
testsuite that supports idmapped mounts.
[1]: https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ 74.211232] BUG: KASAN: stack-out-of-bounds in iov_iter_revert+0x809/0x900
[ 74.212778] Read of size 8 at addr ffff888025dc78b8 by task
syz-executor.0/828
[ 74.214756] CPU: 0 PID: 828 Comm: syz-executor.0 Not tainted
5.14.0-rc3-next-20210730 #1
[ 74.216525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 74.219033] Call Trace:
[ 74.219683] dump_stack_lvl+0x8b/0xb3
[ 74.220706] print_address_description.constprop.0+0x1f/0x140
[ 74.224226] kasan_report.cold+0x7f/0x11b
[ 74.226085] iov_iter_revert+0x809/0x900
[ 74.227960] io_write+0x57d/0xe40
[ 74.232647] io_issue_sqe+0x4da/0x6a80
[ 74.242578] __io_queue_sqe+0x1ac/0xe60
[ 74.245358] io_submit_sqes+0x3f6e/0x76a0
[ 74.248207] __do_sys_io_uring_enter+0x90c/0x1a20
[ 74.257167] do_syscall_64+0x3b/0x90
[ 74.257984] entry_SYSCALL_64_after_hwframe+0x44/0xae
old_size = iov_iter_count();
...
iov_iter_revert(old_size - iov_iter_count());
If iov_iter_revert() is done base on the initial size as above, and the
iter is truncated and not reexpanded in the middle, it miscalculates
borders causing problems. This trace is due to no one reexpanding after
generic_write_checks().
Now iters store how many bytes has been truncated, so reexpand them to
the initial state right before reverting.
Cc: stable@vger.kernel.org
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-and-tested-by: syzbot+9671693590ef5aad8953@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
userfaultfd assumes that the enabled features are set once and never
changed after UFFDIO_API ioctl succeeded.
However, currently, UFFDIO_API can be called concurrently from two
different threads, succeed on both threads and leave userfaultfd's
features in non-deterministic state. Theoretically, other uffd operations
(ioctl's and page-faults) can be dispatched while adversely affected by
such changes of features.
Moreover, the writes to ctx->state and ctx->features are not ordered,
which can - theoretically, again - let userfaultfd_ioctl() think that
userfaultfd API completed, while the features are still not initialized.
To avoid races, it is arguably best to get rid of ctx->state. Since there
are only 2 states, record the API initialization in ctx->features as the
uppermost bit and remove ctx->state.
Link: https://lkml.kernel.org/r/20210808020724.1022515-3-namit@vmware.com
Fixes: 9cd75c3cd4 ("userfaultfd: non-cooperative: add ability to report non-PF events from uffd descriptor")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "userfaultfd: minor bug fixes".
Three unrelated bug fixes. The first two addresses possible issues (not
too theoretical ones), but I did not encounter them in practice.
The third patch addresses a test bug that causes the test to fail on my
system. It has been sent before as part of a bigger RFC.
This patch (of 3):
mmap_changing is currently a boolean variable, which is set and cleared
without any lock that protects against concurrent modifications.
mmap_changing is supposed to mark whether userfaultfd page-faults handling
should be retried since mappings are undergoing a change. However,
concurrent calls, for instance to madvise(MADV_DONTNEED), might cause
mmap_changing to be false, although the remove event was still not read
(hence acknowledged) by the user.
Change mmap_changing to atomic_t and increase/decrease appropriately. Add
a debug assertion to see whether mmap_changing is negative.
Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com
Fixes: df2cc96e77 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_vma() and variants need protection when used. This patch adds
mmap_assert_lock() calls in the functions.
To make sure the invariant is satisfied, we also need to add a
mmap_read_lock() around the get_user_pages_remote() call in
get_arg_page(). The lock is not strictly necessary because the mm has
been newly created, but the extra cost is limited because the same mutex
was also acquired shortly before in __bprm_mm_init(), so it is hot and
uncontended.
[penguin-kernel@i-love.sakura.ne.jp: TOMOYO needs the same protection which get_arg_page() needs]
Link: https://lkml.kernel.org/r/58bb6bf7-a57e-8a40-e74b-39584b415152@i-love.sakura.ne.jp
Link: https://lkml.kernel.org/r/20210731175341.3458608-1-lrizzo@google.com
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Container admin can create new namespaces and force kernel to allocate up
to several pages of memory for the namespaces and its associated
structures.
Net and uts namespaces have enabled accounting for such allocations. It
makes sense to account for rest ones to restrict the host's memory
consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/5525bcbf-533e-da27-79b7-158686c64e13@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yutian Yang <nglaive@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fasync_struct is used by almost all character device drivers to set up the
fasync queue, and for regular files by the file lease code. This
structure is quite small but long-living and it can be assigned for any
open file.
It makes sense to account for its allocations to restrict the host's
memory consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/1b408625-d71c-0b26-b0b6-9baf00f93e69@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yutian Yang <nglaive@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
User can create file locks for each open file and force kernel to allocate
small but long-living objects per each open file.
It makes sense to account for these objects to limit the host's memory
consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/b009f4c7-f0ab-c0ec-8e83-918f47d677da@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yutian Yang <nglaive@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
User can call select/poll system calls with a large number of assigned
file descriptors and force kernel to allocate up to several pages of
memory till end of these sleeping system calls. We have here long-living
unaccounted per-task allocations.
It makes sense to account for these allocations to restrict the host's
memory consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/56e31cb5-6e1e-bdba-d7ca-be64b9842363@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yutian Yang <nglaive@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "memcg accounting from OpenVZ", v7.
OpenVZ uses memory accounting 20+ years since v2.2.x linux kernels.
Initially we used our own accounting subsystem, then partially committed
it to upstream, and a few years ago switched to cgroups v1. Now we're
rebasing again, revising our old patches and trying to push them upstream.
We try to protect the host system from any misuse of kernel memory
allocation triggered by untrusted users inside the containers.
Patch-set is addressed mostly to cgroups maintainers and cgroups@ mailing
list, though I would be very grateful for any comments from maintainersi
of affected subsystems or other people added in cc:
Compared to the upstream, we additionally account the following kernel objects:
- network devices and its Tx/Rx queues
- ipv4/v6 addresses and routing-related objects
- inet_bind_bucket cache objects
- VLAN group arrays
- ipv6/sit: ip_tunnel_prl
- scm_fp_list objects used by SCM_RIGHTS messages of Unix sockets
- nsproxy and namespace objects itself
- IPC objects: semaphores, message queues and share memory segments
- mounts
- pollfd and select bits arrays
- signals and posix timers
- file lock
- fasync_struct used by the file lease code and driver's fasync queues
- tty objects
- per-mm LDT
We have an incorrect/incomplete/obsoleted accounting for few other kernel
objects: sk_filter, af_packets, netlink and xt_counters for iptables.
They require rework and probably will be dropped at all.
Also we're going to add an accounting for nft, however it is not ready
yet.
We have not tested performance on upstream, however, our performance team
compares our current RHEL7-based production kernel and reports that they
are at least not worse as the according original RHEL7 kernel.
This patch (of 10):
The kernel allocates ~400 bytes of 'struct mount' for any new mount.
Creating a new mount namespace clones most of the parent mounts, and this
can be repeated many times. Additionally, each mount allocates up to
PATH_MAX=4096 bytes for mnt->mnt_devname.
It makes sense to account for these allocations to restrict the host's
memory consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/045db11f-4a45-7c9b-2664-5b32c2b44943@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Yutian Yang <nglaive@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds accounting flags to fs_context and legacy_fs_context
allocation sites so that kernel could correctly charge these objects.
We have written a PoC to demonstrate the effect of the missing-charging
bugs. The PoC takes around 1,200MB unaccounted memory, while it is
charged for only 362MB memory usage. We evaluate the PoC on QEMU x86_64
v5.2.90 + Linux kernel v5.10.19 + Debian buster. All the limitations
including ulimits and sysctl variables are set as default. Specifically,
the hard NOFILE limit and nr_open in sysctl are both 1,048,576.
/*------------------------- POC code ----------------------------*/
#define _GNU_SOURCE
#include <sys/types.h>
#include <sys/file.h>
#include <time.h>
#include <sys/wait.h>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <sched.h>
#include <fcntl.h>
#include <linux/mount.h>
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
#define STACK_SIZE (8 * 1024)
#ifndef __NR_fsopen
#define __NR_fsopen 430
#endif
static inline int fsopen(const char *fs_name, unsigned int flags)
{
return syscall(__NR_fsopen, fs_name, flags);
}
static char thread_stack[512][STACK_SIZE];
int thread_fn(void* arg)
{
for (int i = 0; i< 800000; ++i) {
int fsfd = fsopen("nfs", FSOPEN_CLOEXEC);
if (fsfd == -1) {
errExit("fsopen");
}
}
while(1);
return 0;
}
int main(int argc, char *argv[]) {
int thread_pid;
for (int i = 0; i < 1; ++i) {
thread_pid = clone(thread_fn, thread_stack[i] + STACK_SIZE, \
SIGCHLD, NULL);
}
while(1);
return 0;
}
/*-------------------------- end --------------------------------*/
Link: https://lkml.kernel.org/r/1626517201-24086-1-git-send-email-nglaive@gmail.com
Signed-off-by: Yutian Yang <nglaive@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <shenwenbo@zju.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We had a recurring situation in which admin procedures setting up
swapfiles would race with test preparation clearing away swapfiles; and
just occasionally that got stuck on a swapfile "(deleted)" which could
never be swapped off. That is not supposed to be possible.
2.6.28 commit f9454548e1 ("don't unlink an active swapfile") admitted
that it was leaving a race window open: now close it.
may_delete() makes the IS_SWAPFILE check (amongst many others) before
inode_lock has been taken on target: now repeat just that simple check in
vfs_unlink() and vfs_rename(), after taking inode_lock.
Which goes most of the way to fixing the race, but swapon() must also
check after it acquires inode_lock, that the file just opened has not
already been unlinked.
Link: https://lkml.kernel.org/r/e17b91ad-a578-9a15-5e3-4989e0f999b5@google.com
Fixes: f9454548e1 ("don't unlink an active swapfile")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_get_page() is very similar to try_get_compound_head(), and in fact
try_get_page() has fallen a little behind in terms of maintenance:
try_get_compound_head() handles speculative page references more
thoroughly.
There are only two try_get_page() callsites, so just call
try_get_compound_head() directly from those, and remove try_get_page()
entirely.
Also, seeing as how this changes try_get_compound_head() into a non-static
function, provide some kerneldoc documentation for it.
Link: https://lkml.kernel.org/r/20210813044133.1536842-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently cgroup_writeback_by_id calls mem_cgroup_wb_stats() to get dirty
pages for a memcg. However mem_cgroup_wb_stats() does a lot more than
just get the number of dirty pages. Just directly get the number of dirty
pages instead of calling mem_cgroup_wb_stats(). Also
cgroup_writeback_by_id() is only called for best-effort dirty flushing, so
remove the unused 'nr' parameter and no need to explicitly flush memcg
stats.
Link: https://lkml.kernel.org/r/20210722182627.2267368-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pginodesteal is supposed to capture the impact that inode reclaim has on
the page cache state. Currently, it doesn't consider shadow pages that
get dropped this way, even though this can have a significant impact on
paging behavior, memory pressure calculations etc.
To improve visibility into these effects, make sure shadow pages get
counted when they get dropped through inode reclaim.
This changes the return value semantics of invalidate_mapping_pages()
semantics slightly, but the only two users are the inode shrinker itsel
and a usb driver that logs it for debugging purposes.
Link: https://lkml.kernel.org/r/20210614211904.14420-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When drop_caches truncates the page cache in an inode it also includes any
shadow entries for evicted pages. However, there is a preliminary check
on whether the inode has pages: if it has *only* shadow entries, it will
skip running truncation on the inode and leave it behind.
Fix the check to mapping_empty(), such that it runs truncation on any
inode that has cache entries at all.
Link: https://lkml.kernel.org/r/20210614211904.14420-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we trigger writeback bandwidth estimation from
balance_dirty_pages() and from wb_writeback(). However neither of these
need to trigger when the system is relatively idle and writeback is
triggered e.g. from fsync(2). Make sure writeback estimates happen
reliably by triggering them from do_writepages().
Link: https://lkml.kernel.org/r/20210713104716.22868-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "writeback: Fix bandwidth estimates", v4.
Fix estimate of writeback throughput when device is not fully busy doing
writeback. Michael Stapelberg has reported that such workload (e.g.
generated by linking) tends to push estimated throughput down to 0 and as
a result writeback on the device is practically stalled.
The first three patches fix the reported issue, the remaining two patches
are unrelated cleanups of problems I've noticed when reading the code.
This patch (of 4):
Track number of inodes under writeback for each bdi_writeback structure.
We will use this to decide whether wb does any IO and so we can estimate
its writeback throughput. In principle we could use number of pages under
writeback (WB_WRITEBACK counter) for this however normal percpu counter
reads are too inaccurate for our purposes and summing the counter is too
expensive.
Link: https://lkml.kernel.org/r/20210713104519.16394-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20210713104716.22868-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to
the expected level for satisfy dlm bast requests from the other nodes.
But there is a rare situation. When dlm lock conversion is being
canceled, ocfs2_downconvert_lock() function will return -EBUSY. You need
to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm
implementation.
If we does not requeue this lockres entry, ocfs2 downconvert thread no
longer handles this dlm lock bast request. Then, the other nodes will not
get the dlm lock again, the current node's process will be blocked when
acquire this dlm lock again.
Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A memory block is allocated through kmalloc(), and its return value is
assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not
initialized but it is accessed in:
iput(oinfo->dqi_gqinode);
To fix this possible uninitialized-variable access, assign NULL to
oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the
assignment in ocfs2_local_read_info(). Remove ocfs2_qinfo_lock_res_init()
in ocfs2_global_read_info().
Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.com
Signed-off-by: Tuo Li <islituo@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The case where "tmp_oh" is NULL is handled at the start of the function.
At this point we know it's non-NULL so this will always return 1.
Link: https://lkml.kernel.org/r/YOcItgIXtisi3MaO@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Larry Chen <lchen@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All in-tree users of MAP_DENYWRITE are gone. MAP_DENYWRITE cannot be
set from user space, so all users are gone; let's remove it.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
At exec time when we mmap the new executable via MAP_DENYWRITE we have it
opened via do_open_execat() and already deny_write_access()'ed the file
successfully. Once exec completes, we allow_write_acces(); however,
we set mm->exe_file in begin_new_exec() via set_mm_exe_file() and
also deny_write_access() as long as mm->exe_file remains set. We'll
effectively deny write access to our executable via mm->exe_file
until mm->exe_file is changed -- when the process is removed, on new
exec, or via sys_prctl(PR_SET_MM_MAP/EXE_FILE).
Let's remove all usage of MAP_DENYWRITE, it's no longer necessary for
mm->exe_file.
In case of an elf interpreter, we'll now only deny write access to the file
during exec. This is somewhat okay, because the interpreter behaves
(and sometime is) a shared library; all shared libraries, especially the
ones loaded directly in user space like via dlopen() won't ever be mapped
via MAP_DENYWRITE, because we ignore that from user space completely;
these shared libraries can always be modified while mapped and executed.
Let's only special-case the main executable, denying write access while
being executed by a process. This can be considered a minor user space
visible change.
While this is a cleanup, it also fixes part of a problem reported with
VM_DENYWRITE on overlayfs, as VM_DENYWRITE is effectively unused with
this patch and will be removed next:
"Overlayfs did not honor positive i_writecount on realfile for
VM_DENYWRITE mappings." [1]
[1] https://lore.kernel.org/r/YNHXzBgzRrZu1MrD@miu.piliscsaba.redhat.com/
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We want to remove VM_DENYWRITE only currently only used when mapping the
executable during exec. During exec, we already deny_write_access() the
executable, however, after exec completes the VMAs mapped
with VM_DENYWRITE effectively keeps write access denied via
deny_write_access().
Let's deny write access when setting or replacing the MM exe_file. With
this change, we can remove VM_DENYWRITE for mapping executables.
Make set_mm_exe_file() return an error in case deny_write_access()
fails; note that this should never happen, because exec code does a
deny_write_access() early and keeps write access denied when calling
set_mm_exe_file. However, it makes the code easier to read and makes
set_mm_exe_file() and replace_mm_exe_file() look more similar.
This represents a minor user space visible change:
sys_prctl(PR_SET_MM_MAP/EXE_FILE) can now fail if the file is already
opened writable. Also, after sys_prctl(PR_SET_MM_MAP/EXE_FILE) the file
cannot be opened writable. Note that we can already fail with -EACCES if
the file doesn't have execute permissions.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
uselib() is the legacy systemcall for loading shared libraries.
Nowadays, applications use dlopen() to load shared libraries, completely
implemented in user space via mmap().
For example, glibc uses MAP_COPY to mmap shared libraries. While this
maps to MAP_PRIVATE | MAP_DENYWRITE on Linux, Linux ignores any
MAP_DENYWRITE specification from user space in mmap.
With this change, all remaining in-tree users of MAP_DENYWRITE use it
to map an executable. We will be able to open shared libraries loaded
via uselib() writable, just as we already can via dlopen() from user
space.
This is one step into the direction of removing MAP_DENYWRITE from the
kernel. This can be considered a minor user space visible change.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
IIUC, IORING_POLL_ADD_MULTI is similar to epoll's edge-triggered mode,
that means once one pure poll request returns one event(cqe), we'll
need to read or write continually until EAGAIN is returned, then I think
there is a possible poll event lost race in multi shot mode:
t1 poll request add | |
t2 | |
t3 event happens | |
t4 task work add | |
t5 | task work run |
t6 | commit one cqe |
t7 | | user app handles cqe
t8 | new event happen |
t9 | add back to waitqueue |
t10 |
After t6 but before t9, if new event happens, there'll be no wakeup
operation, and if user app has picked up this cqe in t7, read or write
until EAGAIN is returned. In t8, new event happens and will be lost,
though this race window maybe small.
To fix this possible race, add poll request back to waitqueue before
committing cqe.
Fixes: 88e41cf928 ("io_uring: add multishot mode for IORING_OP_POLL_ADD")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210903142436.5767-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SQPOLL has a different thread doing submissions, we need to check for
that and use the right task context when updating the worker values.
Just hold the sqd->lock across the operation, this ensures that the
thread cannot go away while we poke at ->io_uring.
Link: https://github.com/axboe/liburing/issues/420
Fixes: 2e480058dd ("io-wq: provide a way to limit max number of workers")
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Tested-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently in the case where kmem_cache_alloc fails the null pointer
cf is dereferenced when assigning cf->is_capsnap = false. Fix this
by adding a null pointer check and return path.
Cc: stable@vger.kernel.org
Addresses-Coverity: ("Dereference null return")
Fixes: b2f9fa1f3b ("ceph: correctly handle releasing an embedded cap flush")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
These are very chatty, racy, and not terribly useful. Just remove them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For example in the case of a forced umount, we'll remove all the session
caps even if they are dirty. Move the warning to a wrapper function and
make most of the callers use it. Call the core function when removing
caps due to a forced umount.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Force umount will try to close the sessions by setting the session
state to _CLOSING. We don't want to WARN in this situation, since it's
expected.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
capsnaps will take inode references via ihold when queueing to flush.
When force unmounting, the client will just close the sessions and
may never get a flush reply, causing a leak and inode ref leak.
Fix this by removing the capsnaps for an inode when removing the caps.
URL: https://tracker.ceph.com/issues/52295
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current code will update the mtime and then try to get caps to
handle the write. If we end up having to request caps from the MDS, then
the mtime in the cap grant will clobber the updated mtime and it'll be
lost.
This is most noticable when two clients are alternately writing to the
same file. Fw caps are continually being granted and revoked, and the
mtime ends up stuck because the updated mtimes are always being
overwritten with the old one.
Fix this by changing the order of operations in ceph_write_iter to get
the caps before updating the times. Also, make sure we check the pool
full conditions before even getting any caps or uninlining.
URL: https://tracker.ceph.com/issues/46574
Reported-by: Jozef Kováč <kovac@firma.zoznam.sk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the case where the export MDS has crashed just after the EImportStart
journal is flushed, a standby MDS takes over for it and when replaying
the EImportStart journal the MDS will wait the client to reconnect. That
may never happen because the client may not have registered or opened
the sessions yet.
When receiving a new map, ensure we reconnect to valid export targets as
well if their sessions don't exist yet.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Print a bit more information when we can't find the realm during
ceph_add_cap. Show both the inode number and the old realm inode
number.
Suggested-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Consolidate some fiddly code for changing an inode's snap_realm
into a new helper function, and change the callers to use it.
While we're in here, nothing uses the i_snap_realm_counter field, so
remove that from the inode.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_mds_client and ceph_mds_session structures are kzalloc'ed so
there's no need to explicitly initialize either of their fields to 0.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The first thing metric_delayed_work does is check mdsc->stopping,
and then return immediately if it's set. That's good since we would
have already torn down the metric structures at this point, otherwise,
but there is no locking around mdsc->stopping.
It's possible that the ceph_metric_destroy call could race with the
delayed_work, in which case we could end up with the delayed_work
accessing destroyed percpu variables.
At this point in the mdsc teardown, the "stopping" flag has already been
set, so there's no benefit to flushing the work. Move the work
cancellation in ceph_metric_destroy ahead of the percpu variable
destruction, and eliminate the flush_delayed_work call in
ceph_mdsc_destroy.
Fixes: 18f473b384 ("ceph: periodically send perf metrics to MDSes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a new vxattr that shows what MDS is authoritative for an inode (if
we happen to have auth caps). If we don't have an auth cap for the inode
then just return -1.
URL: https://tracker.ceph.com/issues/1276
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We missed these in the recent fscache rework.
Reported-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the client requests who will have unsafe and safe replies from
MDS daemons, in the MDS side the MDS daemons won't flush the mdlog
(journal log) immediatelly, because they think it's unnecessary.
That's true for most cases but not all, likes the fsync request.
The fsync will wait until all the unsafe replied requests to be
safely replied.
Normally if there have multiple threads or clients are running, the
whole mdlog in MDS daemons could be flushed in time if any request
will trigger the mdlog submit thread. So usually we won't experience
the normal operations will stuck for a long time. But in case there
has only one client with only thread is running, the stuck phenomenon
maybe obvious and the worst case it must wait at most 5 seconds to
wait the mdlog to be flushed by the MDS's tick thread periodically.
This patch will trigger to flush the mdlog in the relevant and auth
MDSes to which the in-flight requests are sent just before waiting
the unsafe requests to finish.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we hit a decoding error late in the frame, then we might exit the
function without putting the pool_ns string. Ensure that we always put
that reference on the way out of the function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This KUnit update for Linux 5.15-rc1 adds new features and tests:
tool:
-- support for --kernel_args to allow setting module params
-- support for --raw_output option to show just the kunit output during
make
tests:
-- KUnit tests for checksums and timestamps
-- Print test statistics on failure
-- Integrates UBSAN into the KUnit testing framework.
It fails KUnit tests whenever it reports undefined behavior.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmEue3EACgkQCwJExA0N
QxzbWRAAsf3NoDhYxNNN0PS9HeyYjnU8evaYWokhJW6LHyJeYkaZ9bTxx9jeAJxR
xl+ywjz5+p86ePDtAVmMeZ41PBs5MOJo//yYJays1SZYuewFpoxMn+vIsILWIN4N
Dw3cBTjNSIIPtX5Zx2xO4zU0v+LYMlw3YMYAhe1UU+yEOwnzLABN/Svi1LbMHgPy
TDUElDHiuJ+0ODxbuvTdZS5B5tV1NnHayuGNNBD3mf2I9ORxgY+myYGYtsZSMALf
LBhQVB9IfkfhwM2yUGwvjiamVxjoWXxzjnlkWgrCyw+FgqyQnkV71dmimy+3Z8Pn
LCqPGGQy8Oy4iPtbXec36D/3+tGjanwNRmlZZyBgdqXLSiUthZjGdnE2TIq/pRZR
+ZFpmz/qGOcjvTX+1i5jrDVppOOcK9ArS2Yzykt/vVlxoW/9JyTgk6MHWn3pN6Jy
GWC5H+fHsSLXcne8oel+1m8OMFZHuraxZsifkdDhKNwwWAMmTPZZzDsW+2pLtCV2
2XXplGlQ9awjypSPY9oZwz8EAgpFi41LMzfZ7wVwjTe+DaRHVe9hZhwbVN95r1+x
gaoi7I3C1b8L0ZYtcVogiyCcpXJEmTUo3+Qi6PEIOf9eHdGIZaWAb7lXQBEbBQIw
mwfR+/cQh/qe735thJ5HZD/xd2d7eQkEeV/tqXgSZsMnQc8I5E4=
=cPbp
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
- fix a race in configfs_lookup (Sishuai Gong)
- minor cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0ukX
-----END PGP SIGNATURE-----
Merge tag 'configfs-5.15' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
- fix a race in configfs_lookup (Sishuai Gong)
- minor cleanups (me)
* tag 'configfs-5.15' of git://git.infradead.org/users/hch/configfs:
configfs: fix a race in configfs_lookup()
configfs: fold configfs_attach_attr into configfs_lookup
configfs: simplify the configfs_dirent_is_ready
configfs: return -ENAMETOOLONG earlier in configfs_lookup
This set includes a number of minor fixes and cleanups
related to the networking changes in the last release.
A patch to delay ack messages reduces network traffic
significantly.
-----BEGIN PGP SIGNATURE-----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=mHIc
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a number of minor fixes and cleanups related to the
networking changes in the last release.
A patch to delay ack messages reduces network traffic significantly"
* tag 'dlm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: avoid comms shutdown delay in release_lockspace
fs: dlm: fix return -EINTR on recovery stopped
fs: dlm: implement delayed ack handling
fs: dlm: move receive loop into receive handler
fs: dlm: fix multiple empty writequeue alloc
fs: dlm: generic connect func
fs: dlm: auto load sctp module
fs: dlm: introduce generic listen
fs: dlm: move to static proto ops
fs: dlm: introduce con_next_wq helper
fs: dlm: cleanup and remove _send_rcom
fs: dlm: clear CF_APP_LIMITED on close
fs: dlm: fix typo in tlv prefix
fs: dlm: use READ_ONCE for config var
fs: dlm: use sk->sk_socket instead of con->sock
If a task is queueing async work and also handling signals, then we can
run into the case where create_io_thread() is interrupted and returns
failure because of that. If this happens for creating the first worker
in a group, then that worker will never get created and we can hang the
ring.
If we do get a fork failure, retry from task_work. With signals we have
to be a bit careful as we cannot simply queue as task_work, as we'll
still have signals pending at that point. Punt over a normal workqueue
first and then create from task_work after that.
Lastly, ensure that we handle fatal worker creations. Worker creation
failures are normally not fatal, only if we fail to create one in an empty
worker group can we not make progress. Right now that is ignored, ensure
that we handle that and run cancel on the work item.
There are two paths that create new workers - one is the "existing worker
going to sleep", and the other is "no workers found for this work, create
one". The former is never fatal, as workers do exist in the group. Only
the latter needs to be carefully handled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It makes the logic easier to follow if we just get rid of the fixed worker
flag, and simply ensure that we never exit the last worker in the group.
This also means that no particular worker is special.
Just track the last timeout state, and if we have hit it and no work
is pending, check if there are other workers. If yes, then we can exit
this one safely.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of just marking the buffer as having overflowed, fill it up as
much as we can. That will allow the overflow case to then return
whatever truncated result if it wants to.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmEw5gEACgkQ8vlZVpUN
gaMatgf9GKc2H3JUDGJVXrOE1EZWXzyDI+Tv6zt0iTr05zi1ahjGccAbmJXiAwxU
Zy5TGr53CpPcGUG+sO4NpVzcH8q7cQeG0pVx9OnzJUdVfmv+htoNE0aAqUY5L3vg
AxV4KPGgxPofRQa3QRE2LDFHIkNs7c0ncprdaAtxNztd09iFo7bIayt614mARK++
HIO7VOGrH5Wya8SSoqYHmlO0g5viy3ypP6CpysIQw0JifSlHYkmYBUJ0/hwPV/Xl
WfzmwQ9p43C9EXVmIN4++l674TDzkSn9ebITXOgkq4C8KjnFgyhKQIj5QVj81MvH
dac5jxsuLTXTLYnRpAQ/duV4jRd+Fw==
=+NN7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTDKKAAKCRDh3BK/laaZ
PG9PAQCUF0fdBlCKudwSEt5PV5xemycL9OCAlYCd7d4XbBIe9wEA6sVJL9J+OwV2
aF0NomiXtJccE+S9+byjVCyqSzQJGQQ=
=6L2Y
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
- support direct I/O for all uncompressed files;
- support fsdax for non-tailpacking regular files;
- use iomap infrastructure for all uncompressed cases;
- support fiemap for both (un)compressed files;
- introduce chunk-based files for chunk deduplication.
- some cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYS03PBEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBNdRAQCzumTFT7TRrA8PmcNB8viVrDO07czJRpwz
Fsh0UdH3IQEAsESa11vmQjbKWATCB3g81SMZeeDqGEb4HYLDhgbS+gw=
=98HB
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, direct I/O and fsdax support for uncompressed files are
now added in order to avoid double-caching for loop device and VM
container use cases. All uncompressed cases are now turned into iomap
infrastructure, which looks much simpler and cleaner.
In addition, fiemap support is added for both (un)compressed files by
using iomap infrastructure as well so end users can easily get file
distribution. We've also added chunk-based uncompressed files support
for data deduplication as the next step of VM container use cases.
Summary:
- support direct I/O for all uncompressed files
- support fsdax for non-tailpacking regular files
- use iomap infrastructure for all uncompressed cases
- support fiemap for both (un)compressed files
- introduce chunk-based files for chunk deduplication
- some cleanups"
* tag 'erofs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix double free of 'copied'
erofs: support reading chunk-based uncompressed files
erofs: introduce chunk-based file on-disk format
erofs: add fiemap support with iomap
erofs: add support for the full decompressed length
erofs: remove the mapping parameter from erofs_try_to_free_cached_page()
erofs: directly use wrapper erofs_page_is_managed() when shrinking
erofs: convert all uncompressed cases to iomap
erofs: dax support for non-tailpacking regular file
erofs: iomap support for non-tailpacking DIO
-----BEGIN PGP SIGNATURE-----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=FR0t
-----END PGP SIGNATURE-----
Merge tag 'fscache-next-20210829' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache updates from David Howells:
"Preparatory work for the fscache rewrite that's being worked on and
fix some bugs. These include:
- Always select netfs stats when enabling fscache stats since they're
displayed through the same procfile.
- Add a cookie debug ID that can be used in tracepoints instead of a
pointer and cache it in the netfs_cache_resources struct rather
than in the netfs_read_request struct to make it more available.
- Use file_inode() in cachefiles rather than dereferencing
file->f_inode directly.
- Provide a procfile to display fscache cookies.
- Remove the fscache and cachefiles histogram procfiles.
- Remove the fscache object list procfile.
- Avoid using %p in fscache and cachefiles as the value is hashed and
not comparable to the register dump in an oops trace.
- Fix the cookie hash function to actually achieve useful dispersion.
- Fix fscache_cookie_put() so that it doesn't dereference the cookie
pointer in the tracepoint after the refcount has been decremented
(we're only allowed to do that if we decremented it to zero).
- Use refcount_t rather than atomic_t for the fscache_cookie
refcount"
* tag 'fscache-next-20210829' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Use refcount_t for the cookie refcount instead of atomic_t
fscache: Fix fscache_cookie_put() to not deref after dec
fscache: Fix cookie key hashing
cachefiles: Change %p in format strings to something else
fscache: Change %p in format strings to something else
fscache: Remove the object list procfile
fscache, cachefiles: Remove the histogram stuff
fscache: Procfile to display cookies
fscache: Add a cookie debug ID and use that in traces
cachefiles: Use file_inode() rather than accessing ->f_inode
netfs: Move cookie debug ID to struct netfs_cache_resources
fscache: Select netfs stats if fscache stats are enabled
Usually in file system init() messages are only displayed in info level.
Change level from notice to info, but keep CONFIG_NTFS3_64BIT_CLUSTER in
notice level. Also this need even more attention so let's put big
warning here so that nobody will not try accidentally use it.
There is also no good reason to display internal stuff like binary tree
search. This is always on option which can only disabled for debugging
purposes by developer. Also this message does not even check if
developer has disabled it or not so it is useless info.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Files already have SDPX identifier so no reason to keep boilerplates in
these files anymore.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This check will be also performed in generic_file_read_iter() so we do
not want to check this two times in a row.
This was founded with Smatch
fs/ntfs3/file.c:803 ntfs_file_read_iter()
warn: unused return: count = iov_iter_count()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Use fiemap_prep() to check valid flags. It also shrink request scope
(@len) to what the fs can actually handle.
This address following Smatch static checker warning:
fs/ntfs3/frecord.c:1894 ni_fiemap()
warn: potential integer overflow from user 'vbo + len'
Because fiemap_prep() shrinks @len this cannot happened anymore.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: lore.kernel.org/ntfs3/20210825080440.GA17407@kili/
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If the call to ext4_map_blocks() fails due to an corrupted file
system, ext4_ext_replay_set_iblocks() can get stuck in an infinite
loop. This could be reproduced by running generic/526 with a file
system that has inline_data and fast_commit enabled. The system will
repeatedly log to the console:
EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076
and the stack that it gets stuck in is:
ext4_block_to_path+0xe3/0x130
ext4_ind_map_blocks+0x93/0x690
ext4_map_blocks+0x100/0x660
skip_hole+0x47/0x70
ext4_ext_replay_set_iblocks+0x223/0x440
ext4_fc_replay_inode+0x29e/0x3b0
ext4_fc_replay+0x278/0x550
do_one_pass+0x646/0xc10
jbd2_journal_recover+0x14a/0x270
jbd2_journal_load+0xc4/0x150
ext4_load_journal+0x1f3/0x490
ext4_fill_super+0x22d4/0x2c00
With this patch, generic/526 still fails, but system is no longer
locking up in a tight loop. It's likely the root casue is that
fast_commit replay is corrupting file systems with inline_data, and we
probably need to add better error handling in the fast commit replay
code path beyond what is done here, which essentially just breaks the
infinite loop without reporting the to the higher levels of the code.
Fixes: 8016E29F4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Cc: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Fix a potential log livelock on busy filesystems when there's so much
work going on that we can't finish a quotaoff before filling up the log
by removing the ability to disable quota accounting.
- Introduce the ability to use per-CPU data structures in XFS so that
we can do a better job of maintaining CPU locality for certain
operations.
- Defer inode inactivation work to per-CPU lists, which will help us
batch that processing. Deletions of large sparse files will *appear*
to run faster, but all that means is that we've moved the work to the
backend.
- Drop the EXPERIMENTAL warnings from the y2038+ support and the inode
btree counters, since it's been nearly a year and no complaints have
come in.
- Remove more of our bespoke kmem* variants in favor of using the
standard Linux calls.
- Prepare for the addition of log incompat features in upcoming cycles
by actually adding code to support this.
- Small cleanups of the xattr code in preparation for landing support
for full logging of extended attribute updates in a future cycle.
- Replace the various log shutdown state and flag code all over xfs
with a single atomic bit flag.
- Fix a serious log recovery bug where log item replay can be skipped
based on the start lsn of a transaction even though the transaction
commit lsn is the key data point for that by enforcing start lsns to
appear in the log in the same order as commit lsns.
- Enable pipelining in the code that pushes log items to disk.
- Drop ->writepage.
- Fix some bugs in GETFSMAP where the last fsmap record reported for a
device could extend beyond the end of the device, and a separate bug
where query keys for one device could be applied to another.
- Don't let GETFSMAP query functions edit their input parameters.
- Small cleanups to the scrub code's handling of perag structures.
- Small cleanups to the incore inode tree walk code.
- Constify btree function parameters that aren't changed, so that there
will never again be confusion about range query functions changing
their input parameters.
- Standardize the format and names of tracepoint data attributes.
- Clean up all the mount state and feature flags to use wrapped bitset
functions instead of inconsistently open-coded flag checks.
- Fix some confusion between xfs_buf hash table key variable vs. block
number.
- Fix a mis-interaction with iomap where we reported shared delalloc
cow fork extents to iomap, which would cause the iomap unshare
operation to return IO errors unnecessarily.
- Fix DONTCACHE behavior.
-----BEGIN PGP SIGNATURE-----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=HPJr
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"There's a lot in this cycle.
Starting with bug fixes: To avoid livelocks between the logging code
and the quota code, we've disabled the ability of quotaoff to turn off
quota accounting. (Admins can still disable quota enforcement, but
truly turning off accounting requires a remount.) We've tried to do
this in a careful enough way that there shouldn't be any user visible
effects aside from quotaoff no longer randomly hanging the system.
We've also fixed some bugs in runtime log behavior that could trip up
log recovery if (otherwise unrelated) transactions manage to start and
commit concurrently; some bugs in the GETFSMAP ioctl where we would
incorrectly restrict the range of records output if the two xfs
devices are of different sizes; a bug that resulted in fallocate
funshare failing unnecessarily; and broken behavior in the xfs inode
cache when DONTCACHE is in play.
As for new features: we now batch inode inactivations in percpu
background threads, which sharply decreases frontend thread wait time
when performing file deletions and should improve overall directory
tree deletion times. This eliminates both the problem where closing an
unlinked file (especially on a frozen fs) can stall for a long time,
and should also ease complaints about direct reclaim bogging down on
unlinked file cleanup.
Starting with this release, we've enabled pipelining of the XFS log.
On workloads with high rates of metadata updates to different shards
of the filesystem, multiple threads can be used to format committed
log updates into log checkpoints.
Lastly, with this release, two new features have graduated to
supported status: inode btree counters (for faster mounts), and
support for dates beyond Y2038. Expect these to be enabled by default
in a future release of xfsprogs.
Summary:
- Fix a potential log livelock on busy filesystems when there's so
much work going on that we can't finish a quotaoff before filling
up the log by removing the ability to disable quota accounting.
- Introduce the ability to use per-CPU data structures in XFS so that
we can do a better job of maintaining CPU locality for certain
operations.
- Defer inode inactivation work to per-CPU lists, which will help us
batch that processing. Deletions of large sparse files will
*appear* to run faster, but all that means is that we've moved the
work to the backend.
- Drop the EXPERIMENTAL warnings from the y2038+ support and the
inode btree counters, since it's been nearly a year and no
complaints have come in.
- Remove more of our bespoke kmem* variants in favor of using the
standard Linux calls.
- Prepare for the addition of log incompat features in upcoming
cycles by actually adding code to support this.
- Small cleanups of the xattr code in preparation for landing support
for full logging of extended attribute updates in a future cycle.
- Replace the various log shutdown state and flag code all over xfs
with a single atomic bit flag.
- Fix a serious log recovery bug where log item replay can be skipped
based on the start lsn of a transaction even though the transaction
commit lsn is the key data point for that by enforcing start lsns
to appear in the log in the same order as commit lsns.
- Enable pipelining in the code that pushes log items to disk.
- Drop ->writepage.
- Fix some bugs in GETFSMAP where the last fsmap record reported for
a device could extend beyond the end of the device, and a separate
bug where query keys for one device could be applied to another.
- Don't let GETFSMAP query functions edit their input parameters.
- Small cleanups to the scrub code's handling of perag structures.
- Small cleanups to the incore inode tree walk code.
- Constify btree function parameters that aren't changed, so that
there will never again be confusion about range query functions
changing their input parameters.
- Standardize the format and names of tracepoint data attributes.
- Clean up all the mount state and feature flags to use wrapped
bitset functions instead of inconsistently open-coded flag checks.
- Fix some confusion between xfs_buf hash table key variable vs.
block number.
- Fix a mis-interaction with iomap where we reported shared delalloc
cow fork extents to iomap, which would cause the iomap unshare
operation to return IO errors unnecessarily.
- Fix DONTCACHE behavior"
* tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (103 commits)
xfs: fix I_DONTCACHE
xfs: only set IOMAP_F_SHARED when providing a srcmap to a write
xfs: fix perag structure refcounting error when scrub fails
xfs: rename buffer cache index variable b_bn
xfs: convert bp->b_bn references to xfs_buf_daddr()
xfs: introduce xfs_buf_daddr()
xfs: kill xfs_sb_version_has_v3inode()
xfs: introduce xfs_sb_is_v5 helper
xfs: remove unused xfs_sb_version_has wrappers
xfs: convert xfs_sb_version_has checks to use mount features
xfs: convert scrub to use mount-based feature checks
xfs: open code sb verifier feature checks
xfs: convert xfs_fs_geometry to use mount feature checks
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown
xfs: convert remaining mount flags to state flags
xfs: convert mount flags to features
xfs: consolidate mount option features in m_features
xfs: replace xfs_sb_version checks with feature flag checks
xfs: reflect sb features in xfs_mount
xfs: rework attr2 feature and mount options
...
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.
This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.
The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"
* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets
If the application uses io_uring and also relies heavily on signals
for communication, that can cause io-wq workers to spuriously exit
just because the parent has a signal pending. Just ignore signals
unless they are fatal.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got a few issues that all boil down to the fact that we have one
list of pending work items, yet two different types of workers to
serve them. This causes some oddities around workers switching type and
even hashed work vs regular work on the same bounded list.
Just separate them out cleanly, similarly to how we already do
accounting of what is running. That provides a clean separation and
removes some corner cases that can cause stalls when handling IO
that is punted to io-wq.
Fixes: ecc53c48c1 ("io-wq: check max_worker limits if a worker transitions bound state")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When dlm_release_lockspace does active shutdown on connections to
other nodes, the active shutdown will wait for any exisitng passive
shutdowns to be resolved. But, the sequence of operations during
dlm_release_lockspace can prevent the normal resolution of passive
shutdowns (processed normally by way of lockspace recovery.)
This disruption of passive shutdown handling can cause the active
shutdown to wait for a full timeout period, delaying the completion
of dlm_release_lockspace.
To fix this, make dlm_release_lockspace resolve existing passive
shutdowns (by calling dlm_clear_members earlier), before it does
active shutdowns. The active shutdowns will not find any passive
shutdowns to wait for, and will not be delayed.
Reported-by: Chris Mackowski <cmackows@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
The prepare_compress_overwrite() gets/locks a page to prepare a read, and calls
f2fs_read_multi_pages() which checks EOF first. If there's any page beyond EOF,
we unlock the page and set cc->rpages[i] = NULL, which we can't put the page
anymore. This makes page leak, so let's fix by putting that page.
Fixes: a949dc5f2c ("f2fs: compress: fix race condition of overwrite vs truncate")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_write_multi_pages(), f2fs_compress_pages() allocates pages for
compression work in cc->cpages[]. Then, f2fs_write_compressed_pages() initiates
bio submission. But, if there's any error before submitting the IOs like early
f2fs_cp_error(), previously it didn't free cpages by f2fs_compress_free_page().
Let's fix memory leak by putting that just before deallocating cc->cpages.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to set the stalled bit early, before we drop the lock for adding
us to the stall hash queue. If not, then we can race with new work being
queued between adding us to the stall hash and io_worker_handle_work()
marking us stalled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYS3lFAAKCRCRxhvAZXjc
opiiAQDydlquFUOP3/HAClwlBr1050GeFLnSVHFTrcaEjUIhLgD9H8hU77c+Q7O8
ZxWmx3Ficn4fkVWN7zsOrcleN6RBtgk=
=VXhQ
-----END PGP SIGNATURE-----
Merge tag 'fs.close_range.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() cleanup from Christian Brauner:
"This is a cleanup for close_range() which was sent as part of a bugfix
we did some time ago in commit 9b5b872215 ("file: fix close_range()
for unshare+cloexec").
We used to share more code between some helpers for close_range()
which made retrieving the maximum number of open fds before calling
into the helpers sensible. But with the introduction of
CLOSE_RANGE_CLOEXEC and the need to retrieve the number of maximum fds
once more for CLOSE_RANGE_CLOEXEC that stopped making sense. So the
code was in a dumb in-limbo state.
Fix this by simplifying the code a bit.
The original idea was to only fix the bug itself and make backporting
easy. And since the cleanup wasn't very pressing I left it in
linux-next for a very long time. I didn't pull the patches from the
list again back then which is why they don't have lore-links. So I'm
listing them below explicitly"
Commit 03ba0fe4d0 ("file: simplify logic in __close_range()")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-3-brauner@kernel.org
Commit f49fd6d3c0 ("file: let pick_file() tell caller it's done")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-4-brauner@kernel.org
* tag 'fs.close_range.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
file: simplify logic in __close_range()
file: let pick_file() tell caller it's done
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYS3iBAAKCRCRxhvAZXjc
olWeAP9CK0NMvXM4eZDQH8LZ7Bg3COvYoGhwuWFoLtHnvYHZ/AEA0jvoe8jH1ekK
wYVkuquIE4Dw735mpjIOThByUUP3CQE=
=+ham
-----END PGP SIGNATURE-----
Merge tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull move_mount updates from Christian Brauner:
"This contains an extension to the move_mount() syscall making it
possible to add a single private mount into an existing propagation
tree.
The use-case comes from the criu folks which have been struggling with
restoring complex mount trees for a long time. Variations of this work
have been discussed at Plumbers before, e.g.
https://www.linuxplumbersconf.org/event/7/contributions/640/
The extension to move_mount() enables criu to restore any set of mount
namespaces, mount trees and sharing group trees without introducing
yet more complexity into mount propagation itself.
The changes required to criu to make use of this and restore complex
propagation trees are available at
https://github.com/Snorch/criu/commits/mount-v2-poc
A cleaned-up version of this will go up for merging into the main criu
repo after this lands"
* tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest
move_mount: allow to add a mount into an existing group
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback errors
are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string.
-----BEGIN PGP SIGNATURE-----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=iVns
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable externally visible change for this cycle is the
addition of support for reads to inline tail fragments of files, which
was requested by the erofs developers; and a correction for a kernel
memory corruption bug if the sysadmin tries to activate a swapfile
with more pages than the swapfile header suggests.
We also now report writeback completion errors to the file mapping
correctly, instead of munging all errors into EIO.
Internally, the bulk of the changes are Christoph's patchset to reduce
the indirect function call count by a third to a half by converting
iomap iteration from a loop pattern to a generator/consumer pattern.
As an added bonus, fsdax no longer open-codes iomap apply loops.
Summary:
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback
errors are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string"
* tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
iomap: standardize tracepoint formatting and storage
mm/swap: consider max pages in iomap_swapfile_add_extent
iomap: move loop control code to iter.c
iomap: constify iomap_iter_srcmap
fsdax: switch the fault handlers to use iomap_iter
fsdax: factor out a dax_fault_actor() helper
fsdax: factor out helpers to simplify the dax fault code
iomap: rework unshare flag
iomap: pass an iomap_iter to various buffered I/O helpers
iomap: remove iomap_apply
fsdax: switch dax_iomap_rw to use iomap_iter
iomap: switch iomap_swapfile_activate to use iomap_iter
iomap: switch iomap_seek_data to use iomap_iter
iomap: switch iomap_seek_hole to use iomap_iter
iomap: switch iomap_bmap to use iomap_iter
iomap: switch iomap_fiemap to use iomap_iter
iomap: switch __iomap_dio_rw to use iomap_iter
iomap: switch iomap_page_mkwrite to use iomap_iter
iomap: switch iomap_zero_range to use iomap_iter
iomap: switch iomap_file_unshare to use iomap_iter
...
- Strengthen parameter checking for project quota ids.
-----BEGIN PGP SIGNATURE-----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=rUwN
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull project quota update from Darrick Wong:
"A single VFS patch that prevents userspace from setting project quota
ids on files that the VFS considers invalid"
* tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: forbid invalid project ID
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames
-----BEGIN PGP SIGNATURE-----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=TGkK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"New features:
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames"
* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
nfsd: fix crash on LOCKT on reexported NFSv3
nfs: don't allow reexport reclaims
lockd: don't attempt blocking locks on nfs reexports
nfs: don't atempt blocking locks on nfs reexports
Keep read and write fds with each nlm_file
lockd: update nlm_lookup_file reexport comment
nlm: minor refactoring
nlm: minor nlm_lookup_file argument change
lockd: lockd server-side shouldn't set fl_ops
SUNRPC: Add documentation for the fail_sunrpc/ directory
SUNRPC: Server-side disconnect injection
SUNRPC: Move client-side disconnect injection
SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
nfsd4: Fix forced-expiry locking
rpc: fix gss_svc_init cleanup on failure
SUNRPC: Add RPC_AUTH_TLS protocol numbers
lockd: change the proc_handler for nsm_use_hostnames
sysctl: introduce new proc handler proc_dobool
SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
...
A previous commit removed the IRQ safety of the worker and wqe locks,
but that left one spot of the hash wait lock now being done without
already having IRQs disabled.
Ensure that we use the right locking variant for the hashed waitqueue
lock.
Fixes: a9a4aa9fbf ("io-wq: wqe and worker locks no longer need to be IRQ safe")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of buffered reading from block device, when short read happens,
we should retry to read more, otherwise the IO will be completed
partially, for example, the following fio expects to read 2MB, but it
can only read 1M or less bytes:
fio --name=onessd --filename=/dev/nvme0n1 --filesize=2M \
--rw=randread --bs=2M --direct=0 --overwrite=0 --numjobs=1 \
--iodepth=1 --time_based=0 --runtime=2 --ioengine=io_uring \
--registerfiles --fixedbufs --gtod_reduce=1 --group_reporting
Fix the issue by allowing short read retry for block device, which sets
FMODE_BUF_RASYNC really.
Fixes: 9a173346bd ("io_uring: fix short read retries for non-reg files")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210821150751.1290434-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During some testing, it became evident that using IORING_OP_WRITE doesn't
hash buffered writes like the other writes commands do. That's simply
an oversight, and can cause performance regressions when doing buffered
writes with this command.
Correct that and add the flag, so that buffered writes are correctly
hashed when using the non-iovec based write command.
Cc: stable@vger.kernel.org
Fixes: 3a6820f2bb ("io_uring: add non-vectored read/write commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The attempt to find and activate a free worker for new work is currently
combined with creating a new one if we don't find one, but that opens
io-wq up to a race where the worker that is found and activated can
put itself to sleep without knowing that it has been selected to perform
this new work.
Fix this by moving the activation into where we add the new work item,
then we can retain it within the wqe->lock scope and elimiate the race
with the worker itself checking inside the lock, but sleeping outside of
it.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Various withdraw related fixes (freeze glock recursion, thread
initialization / destruction order, journal recovery, glock cleanup,
withdraw under journal lock).
* Some error message improvements.
* Various minor cleanups.
-----BEGIN PGP SIGNATURE-----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=QBuF
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Various withdraw related fixes (freeze glock recursion, thread
initialization / destruction order, journal recovery, glock cleanup,
withdraw under journal lock).
- Some error message improvements.
- Various minor cleanups.
* tag 'gfs2-v5.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove redundant check from gfs2_glock_dq
gfs2: Delay withdraw from atomic context
gfs2: Don't call dlm after protocol is unmounted
gfs2: don't stop reads while withdraw in progress
gfs2: Mark journal inodes as "don't cache"
gfs2: nit: gfs2_drop_inode shouldn't return bool
gfs2: Eliminate vestigial HIF_FIRST
gfs2: Make recovery error more readable
gfs2: Don't release and reacquire local statfs bh
gfs2: init system threads before freeze lock
gfs2: tiny cleanup in gfs2_log_reserve
gfs2: trivial clean up of gfs2_ail_error
gfs2: be more verbose replaying invalid rgrp blocks
gfs2: Fix glock recursion in freeze_go_xmote_bh
gfs2: Fix memory leak of object lsi on error return path
Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks.
- Use base64url instead of a custom Base64 variant.
- Document struct fscrypt_operations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYS0HzhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+XZAQDfvDE9gK4Ii2uE4Jb5XYv4M/BnVhoR
WIhNEoHROIGv+AEAtyfmeCMdpPobkWHFfAE1iBysl3iS56fibQhi2wqyuQI=
=s6Wi
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks
- Use base64url instead of a custom Base64 variant
- Document struct fscrypt_operations"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: document struct fscrypt_operations
fscrypt: align Base64 encoding with RFC 4648 base64url
fscrypt: remove mention of symlink st_size quirk from documentation
ubifs: report correct st_size for encrypted symlinks
f2fs: report correct st_size for encrypted symlinks
ext4: report correct st_size for encrypted symlinks
fscrypt: add fscrypt_symlink_getattr() for computing st_size
-----BEGIN PGP SIGNATURE-----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=ALO9
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights of this round are integrations with fs-verity and
idmapped mounts, the rest is usual mix of minor improvements, speedups
and cleanups.
There are some patches outside of btrfs, namely updating some VFS
interfaces, all straightforward and acked.
Features:
- fs-verity support, using standard ioctls, backward compatible with
read-only limitation on inodes with previously enabled fs-verity
- idmapped mount support
- make mount with rescue=ibadroots more tolerant to partially damaged
trees
- allow raid0 on a single device and raid10 on two devices,
degenerate cases but might be useful as an intermediate step during
conversion to other profiles
- zoned mode block group auto reclaim can be disabled via sysfs knob
Performance improvements:
- continue readahead of node siblings even if target node is in
memory, could speed up full send (on sample test +11%)
- batching of delayed items can speed up creating many files
- fsync/tree-log speedups
- avoid unnecessary work (gains +2% throughput, -2% run time on
sample load)
- reduced lock contention on renames (on dbench +4% throughput,
up to -30% latency)
Fixes:
- various zoned mode fixes
- preemptive flushing threshold tuning, avoid excessive work on
almost full filesystems
Core:
- continued subpage support, preparation for implementing remaining
features like compression and defragmentation; with some
limitations, write is now enabled on 64K page systems with 4K
sectors, still considered experimental
- no readahead on compressed reads
- inline extents disabled
- disabled raid56 profile conversion and mount
- improved flushing logic, fixing early ENOSPC on some workloads
- inode flags have been internally split to read-only and read-write
incompat bit parts, used by fs-verity
- new tree items for fs-verity
- descriptor item
- Merkle tree item
- inode operations extended to be namespace-aware
- cleanups and refactoring
Generic code changes:
- fs: new export filemap_fdatawrite_wbc
- fs: removed sync_inode
- block: bio_trim argument type fixups
- vfs: add namespace-aware lookup"
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reset replace target device to allocation state on close
btrfs: zoned: fix ordered extent boundary calculation
btrfs: do not do preemptive flushing if the majority is global rsv
btrfs: reduce the preemptive flushing threshold to 90%
btrfs: tree-log: check btrfs_lookup_data_extent return value
btrfs: avoid unnecessarily logging directories that had no changes
btrfs: allow idmapped mount
btrfs: handle ACLs on idmapped mounts
btrfs: allow idmapped INO_LOOKUP_USER ioctl
btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
btrfs: allow idmapped SNAP_DESTROY ioctls
btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
btrfs: check whether fsgid/fsuid are mapped during subvolume creation
btrfs: allow idmapped permission inode op
btrfs: allow idmapped setattr inode op
btrfs: allow idmapped tmpfile inode op
btrfs: allow idmapped symlink inode op
btrfs: allow idmapped mkdir inode op
...
-----BEGIN PGP SIGNATURE-----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=d9f7
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
"Eleven cifs/smb3 client fixes:
- mostly restructuring to allow disabling less secure algorithms
(this will allow eventual removing rc4 and md4 from general use in
the kernel)
- four fixes, including two for stable
- enable r/w support with fscache and cifs.ko
I am working on a larger set of changes (the usual ... multichannel,
auth and signing improvements), but wanted to get these in earlier to
reduce chance of merge conflicts later in the merge window"
* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
cifs: add cifs_common directory to MAINTAINERS file
cifs: cifs_md4 convert to SPDX identifier
cifs: create a MD4 module and switch cifs.ko to use it
cifs: fork arc4 and create a separate module for it for cifs and other users
cifs: remove support for NTLM and weaker authentication algorithms
cifs: enable fscache usage even for files opened as rw
oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
smb3: fix posix extensions mount option
cifs: fix wrong release in sess_alloc_buffer() failed path
CIFS: Fix a potencially linear read overflow
-----BEGIN PGP SIGNATURE-----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=yh1J
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd
Pull initial ksmbd implementation from Steve French:
"Initial merge of kernel smb3 file server, ksmbd.
The SMB family of protocols is the most widely deployed network
filesystem protocol, the default on Windows and Macs (and even on many
phones and tablets), with clients and servers on all major operating
systems, but lacked a kernel server for Linux. For many cases the
current userspace server choices were suboptimal either due to memory
footprint, performance or difficulty integrating well with advanced
Linux features.
ksmbd is a new kernel module which implements the server-side of the
SMB3 protocol. The target is to provide optimized performance, GPLv2
SMB server, and better lease handling (distributed caching). The
bigger goal is to add new features more rapidly (e.g. RDMA aka
"smbdirect", and recent encryption and signing improvements to the
protocol) which are easier to develop on a smaller, more tightly
optimized kernel server than for example in Samba.
The Samba project is much broader in scope (tools, security services,
LDAP, Active Directory Domain Controller, and a cross platform file
server for a wider variety of purposes) but the user space file server
portion of Samba has proved hard to optimize for some Linux workloads,
including for smaller devices.
This is not meant to replace Samba, but rather be an extension to
allow better optimizing for Linux, and will continue to integrate well
with Samba user space tools and libraries where appropriate. Working
with the Samba team we have already made sure that the configuration
files and xattrs are in a compatible format between the kernel and
user space server.
Various types of functional and regression tests are regularly run
against it. One example is the automated 'buildbot' regression tests
which use the Linux client to test against ksmbd, e.g.
http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56
but other test suites, including Samba's smbtorture functional test
suite are also used regularly"
* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
ksmbd: fix __write_overflow warning in ndr_read_string
MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
MAINTAINERS: ksmbd: update my email address
ksmbd: fix permission check issue on chown and chmod
ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
MAINTAINERS: add git adddress of ksmbd
ksmbd: update SMB3 multi-channel support in ksmbd.rst
ksmbd: smbd: fix kernel oops during server shutdown
ksmbd: remove select FS_POSIX_ACL in Kconfig
ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
ksmbd: update the comment for smb2_get_ksmbd_tcon()
ksmbd: change int data type to boolean
ksmbd: Fix multi-protocol negotiation
ksmbd: fix an oops in error handling in smb2_open()
ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
ksmbd: fix missing error code in smb2_lock
ksmbd: use channel signingkey for binding SMB2 session setup
ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
ksmbd: fix -Wstringop-truncation warnings
...
Rename now works "Add new name and remove old name".
"Remove old name and add new name" may result in bad inode
if we can't add new name and then can't restore (add) old name.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
For some reason we have FAT ioctl calls. Even old ntfs driver did not
use these. We should not use these because it his hard to get things out
of kernel when they are upstream. That's why we remove these for now.
More discussion is needed what ioctl should be implemented and what is
important.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Callers of fuse_writeback_range() assume that the file is ready for
modification by the server in the supplied byte range after the call
returns.
If there's a write that extends the file beyond the end of the supplied
range, then the file needs to be extended to at least the end of the range,
but currently that's not done.
There are at least two cases where this can cause problems:
- copy_file_range() will return short count if the file is not extended
up to end of the source range.
- FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file,
hence the region may not be fully allocated.
Fix by flushing writes from the start of the range up to the end of the
file. This could be optimized if the writes are non-extending, etc, but
it's probably not worth the trouble.
Fixes: a2bc923629 ("fuse: fix copy_file_range() in the writeback case")
Fixes: 6b1bdb56b1 ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that ext4_do_update_inode() return error before filling the whole
inode data if we fail to set inode blocks in ext4_inode_blocks_set().
This error should never happen in theory since sb->s_maxbytes should not
have allowed this, we have already init sb->s_maxbytes according to this
feature in ext4_fill_super(). So even through that could only happen due
to the filesystem corruption, we'd better to return after we finish
updating the inode because it may left an uninitialized buffer and we
could read this buffer later in "errors=continue" mode.
This patch make the updating inode data procedure atomic, call
EXT4_ERROR_INODE() after we dropping i_raw_lock after something bad
happened, make sure that the inode is integrated, and also drop a BUG_ON
and do some small cleanups.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "if (!buffer_uptodate(bh))" hunk covered almost the whole code after
getting buffer in __ext4_get_inode_loc() which seems unnecessary, remove
it and switch to check ext4_buffer_uptodate(), it simplify code and make
it more readable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No EIO simulation is required if the buffer is uptodate, so move the
simulation behind read bio completeion just like inode/block bitmap
simulation does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Even though the length of the critical section when adding / removing
orphaned inodes was significantly reduced by using orphan file, the
contention of lock protecting orphan file still appears high in profiles
for truncate / unlink intensive workloads with high number of threads.
This patch makes handling of orphan file completely lockless. Also to
reduce conflicts between CPUs different CPUs start searching for empty
slot in orphan file in different blocks.
Performance comparison of locked orphan file handling, lockless orphan
file handling, and completely disabled orphan inode handling
from 80 CPU Xeon Server with 526 GB of RAM, filesystem located on
SAS SSD disk, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time Time
Orphan locked Orphan lockless No orphan
1 0.945600 0.939400 0.891200
2 1.331800 1.246600 1.174400
4 1.995000 1.780600 1.713200
8 6.424200 4.900000 4.106000
16 14.937600 8.516400 8.138000
32 33.038200 24.565600 24.002200
64 60.823600 39.844600 38.440200
128 122.941400 70.950400 69.315000
So we can see that with lockless orphan file handling, addition /
deletion of orphaned inodes got almost completely out of picture even
for a microbenchmark stressing it.
For reaim creat_clo workload on ramdisk there are also noticeable gains
(average of 5 runs):
Clients Vanilla (ops/s) Patched (ops/s)
creat_clo-1 14705.88 ( 0.00%) 14354.07 * -2.39%*
creat_clo-3 27108.43 ( 0.00%) 28301.89 ( 4.40%)
creat_clo-5 37406.48 ( 0.00%) 45180.73 * 20.78%*
creat_clo-7 41338.58 ( 0.00%) 54687.50 * 32.29%*
creat_clo-9 45226.13 ( 0.00%) 62937.07 * 39.16%*
creat_clo-11 44000.00 ( 0.00%) 65088.76 * 47.93%*
creat_clo-13 36516.85 ( 0.00%) 68661.97 * 88.03%*
creat_clo-15 30864.20 ( 0.00%) 69551.78 * 125.35%*
creat_clo-17 27478.45 ( 0.00%) 67729.08 * 146.48%*
creat_clo-19 25000.00 ( 0.00%) 61621.62 * 146.49%*
creat_clo-21 18772.35 ( 0.00%) 63829.79 * 240.02%*
creat_clo-23 16698.94 ( 0.00%) 61938.96 * 270.92%*
creat_clo-25 14973.05 ( 0.00%) 56947.61 * 280.33%*
creat_clo-27 16436.69 ( 0.00%) 65008.03 * 295.51%*
creat_clo-29 13949.01 ( 0.00%) 69047.62 * 395.00%*
creat_clo-31 14283.52 ( 0.00%) 67982.45 * 375.95%*
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 orphan inode handling is a bottleneck for workloads which heavily
truncate / unlink small files since it contends on the global
s_orphan_mutex lock (and generally it's difficult to improve scalability
of the ondisk linked list of orphaned inodes).
This patch implements new way of handling orphan inodes. Instead of
linking orphaned inode into a linked list, we store it's inode number in
a new special file which we call "orphan file". Only if there's no more
space in the orphan file (too many inodes are currently orphaned) we
fall back to using old style linked list. Currently we protect
operations in the orphan file with a spinlock for simplicity but even in
this setting we can substantially reduce the length of the critical
section and thus speedup some workloads. In the next patch we improve
this by making orphan handling lockless.
Note that the change is backwards compatible when the filesystem is
clean - the existence of the orphan file is a compat feature, we set
another ro-compat feature indicating orphan file needs scanning for
orphaned inodes when mounting filesystem read-write. This ro-compat
feature gets cleared on unmount / remount read-only.
Some performance data from 80 CPU Xeon Server with 512 GB of RAM,
filesystem located on SSD, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time
Vanilla Patched
1 1.057200 0.945600
2 1.680400 1.331800
4 2.547000 1.995000
8 7.049400 6.424200
16 14.827800 14.937600
32 40.948200 33.038200
64 87.787400 60.823600
128 206.504000 122.941400
So we can see significant wins all over the board.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move functions for handling orphan inodes into a new file
fs/ext4/orphan.c to have them in one place and somewhat reduce size of
other files. No code changes.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add sparse annotations to suppress false positive context imbalance
warnings, and use NULL instead of 0 in EXT_MAX_{EXTENT,INDEX}.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The location of the system.data extended attribute can change whenever
xattr_sem is not taken. So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().
This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.
Cc: stable@kernel.org
Fixes: f19d5870cb ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812133122.26360-1-jack@suse.cz
Commit 81414b4dd4 ("ext4: remove redundant sb checksum
recomputation") removed checksum recalculation after updating
superblock free space / inode counters in ext4_fill_super() based on
the fact that we will recalculate the checksum on superblock
writeout.
That is correct assumption but until the writeout happens (which can
take a long time) the checksum is incorrect in the buffer cache and if
programs such as tune2fs or resize2fs is called shortly after a file
system is mounted can fail. So return back the checksum recalculation
and add a comment explaining why.
Fixes: 81414b4dd4 ("ext4: remove redundant sb checksum recomputation")
Cc: stable@kernel.org
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812124737.21981-1-jack@suse.cz
If the underlying storage device is using thin-provisioning, it's
possible for a zeroout operation to return ENOSPC.
Commit df22291ff0 ("ext4: Retry block allocation if we have free blocks
left") added logic to retry block allocation since we might get free block
after we commit a transaction. But the ENOSPC from thin-provisioning
will confuse ext4, and lead to an infinite loop.
Since using zeroout instead of splitting the extent node is an
optimization, if it fails, we might as well fall back to splitting the
extent node.
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's pass fc_dentry directly since those arguments (tag, parent_ino and
ino etc) can be deferenced from it.
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210727080708.3708814-1-guoqing.jiang@linux.dev
The background discard kwork tries to mark blocks used and issue
discard. This can make filesystem suffer from NOSPC error, xfstest
generic/371 can fail due to it. Fix it by flushing discard kwork
in ext4_should_retry_alloc. At the same time, give up discard at
the moment.
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-6-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, discard is issued and waited to be completed in jbd2
commit kthread context after the logs are committed. When large
amount of files are deleted and discard is flooding, jbd2 commit
kthread can be blocked for long time. Then all of the metadata
operations can be blocked to wait the log space.
One case is the page fault path with read mm->mmap_sem held, which
wants to update the file time but has to wait for the log space.
When other threads in the task wants to do mmap, then write mmap_sem
is blocked. Finally all of the following read mmap_sem requirements
are blocked, even the ps command which need to read the /proc/pid/
-cmdline. Our monitor service which needs to read /proc/pid/cmdline
used to be blocked for 5 mins.
This patch frees the blocks back to buddy after commit and then do
discard in a async kworker context in fstrim fashion, namely,
- mark blocks to be discarded as used if they have not been allocated
- do discard
- mark them free
After this, jbd2 commit kthread won't be blocked any more by discard
and we won't get NOSPC even if the discard is slow or throttled.
Link: https://marc.info/?l=linux-kernel&m=162143690731901&w=2
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-5-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=T7Zv
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-block
Pull io_uring mkdirat/symlinkat/linkat support from Jens Axboe:
"This adds io_uring support for mkdirat, symlinkat, and linkat"
* tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-block:
io_uring: add support for IORING_OP_LINKAT
io_uring: add support for IORING_OP_SYMLINKAT
io_uring: add support for IORING_OP_MKDIRAT
namei: update do_*() helpers to return ints
namei: make do_linkat() take struct filename
namei: add getname_uflags()
namei: make do_symlinkat() take struct filename
namei: make do_mknodat() take struct filename
namei: make do_mkdirat() take struct filename
namei: change filename_parentat() calling conventions
namei: ignore ERR/NULL names in putname()
-----BEGIN PGP SIGNATURE-----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=izfH
-----END PGP SIGNATURE-----
Merge tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-block
Pull support for struct bio recycling from Jens Axboe:
"This adds bio recycling support for polled IO, allowing quick reuse of
a bio for high IOPS scenarios via a percpu bio_set list.
It's good for almost a 10% improvement in performance, bumping our
per-core IO limit from ~3.2M IOPS to ~3.5M IOPS"
* tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-block:
bio: improve kerneldoc documentation for bio_alloc_kiocb()
block: provide bio_clear_hipri() helper
block: use the percpu bio cache in __blkdev_direct_IO
io_uring: enable use of bio alloc cache
block: clear BIO_PERCPU_CACHE flag if polling isn't supported
bio: add allocation cache abstraction
fs: add kiocb alloc cache flag
bio: optimize initialization of a bio
Core code:
- Cure a couple of incorrectness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=eP5w
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core code:
- Cure a couple of correctness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place"
* tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
clocksource: Make clocksource watchdog test safe for slow-HZ systems
dt-bindings: timer: Add ABIs for new Ingenic SoCs
clocksource/drivers/fttmr010: Pass around less pointers
clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown
clocksource/drivers/ingenic: Use bitfield macro helpers
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
dt-bindings: timer: convert rockchip,rk-timer.txt to YAML
clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU
clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64
hrtimer: Unbreak hrtimer_force_reprogram()
hrtimer: Use raw_cpu_ptr() in clock_was_set()
hrtimer: Avoid more SMP function calls in clock_was_set()
hrtimer: Avoid unnecessary SMP function calls in clock_was_set()
hrtimer: Add bases argument to clock_was_set()
time/timekeeping: Avoid invoking clock_was_set() twice
timekeeping: Distangle resume and clock-was-set events
timerfd: Provide timerfd_resume()
hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case
hrtimer: Ensure timerfd notification for HIGHRES=n
hrtimer: Consolidate reprogramming code
...
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks on
AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their
own task_cpu_possible_mask(p). When this is done, the scheduler will
make sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VdGE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks
on AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their own
task_cpu_possible_mask(p). When this is done, the scheduler will make
sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
* tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
eventfd: Make signal recursion protection a task bit
sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
sched: Replace deprecated CPU-hotplug functions.
sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
sched: Fix UCLAMP_FLAG_IDLE setting
sched/deadline: Fix missing clock update in migrate_task_rq_dl()
sched/fair: Avoid a second scan of target in select_idle_cpu
sched/fair: Use prev instead of new target as recent_used_cpu
sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
...
-----BEGIN PGP SIGNATURE-----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=CfcC
-----END PGP SIGNATURE-----
Merge tag 'locks-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"This starts with a couple of fixes for potential deadlocks in the
fowner/fasync handling.
The next patch removes the old mandatory locking code from the kernel
altogether.
The last patch cleans up rw_verify_area a bit more after the mandatory
locking removal"
* tag 'locks-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs: clean up after mandatory file locking support removal
fs: remove mandatory file locking support
fcntl: fix potential deadlock for &fasync_struct.fa_lock
fcntl: fix potential deadlocks for &fown_struct.lock
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmTZcACgkQnJ2qBz9k
QNkkmAgArW6XoF1CePds/ZaC9vfg/nk66/zVo0n+J8xXjMWAPxcKbWFfV0uWVixq
yk4lcLV47a2Mu/B/1oLNd3vrSmhwU+srWqNwOFn1nv+lP/6wJqr8oztRHn/0L9Q3
ZSRrukSejbQ6AvTL/WzTNnCjjCc2ne3Kyko6W41aU6uyJuzhSM32wbx7qlV6t54Z
iint9OrB4gM0avLohNafTUq6I+tEGzBMNwpCG/tqCmkcvDcv3rTDVAnPSCTm0Tx2
hdrYDcY/rLxo93pDBaW1rYA/fohR+mIVye6k2TjkPAL6T1x+rxeT5qnc+YijH5yF
sFPDhlD+ZsfOLi8stWXLOJ+8+gLODg==
=pDBR
-----END PGP SIGNATURE-----
Merge tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs hole punching vs cache filling race fixes from Jan Kara:
"Fix races leading to possible data corruption or stale data exposure
in multiple filesystems when hole punching races with operations such
as readahead.
This is the series I was sending for the last merge window but with
your objection fixed - now filemap_fault() has been modified to take
invalidate_lock only when we need to create new page in the page cache
and / or bring it uptodate"
* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
filesystems/locking: fix Malformed table warning
cifs: Fix race between hole punch and page fault
ceph: Fix race between hole punch and page fault
fuse: Convert to using invalidate_lock
f2fs: Convert to using invalidate_lock
zonefs: Convert to using invalidate_lock
xfs: Convert double locking of MMAPLOCK to use VFS helpers
xfs: Convert to use invalidate_lock
xfs: Refactor xfs_isilocked()
ext2: Convert to using invalidate_lock
ext4: Convert to use mapping->invalidate_lock
mm: Add functions to lock invalidate_lock for two mappings
mm: Protect operations adding pages to page cache with invalidate_lock
documentation: Sync file_operations members with reality
mm: Fix comments mentioning i_mutex
Instead of messing around with XDR padding in the RDMA layer, we should
just give the RPC layer an aligned buffer. Try to avoid creating extra
RPC calls by aligning to the smaller value of ALIGN(len, rsize) and
PAGE_SIZE.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmPKcACgkQnJ2qBz9k
QNk6RwgA2GJlJ6g2I/iT64ii4l8nWVEyp1OI/m2DvEaoci+SLp/oIh/VbEMsdj7D
Fvoajo6KRu53/Ucwg+u9i5tygpCcu5X52DB1qZWzNZKxl98EdXRTb9e6n3jNDBti
dz4EAd/YZhADiS5sX9kZLbSE1Kzirx8ULsftZ3T31rkU9n1pJD6tH7qyHDot3oV+
XnONRBb2coJ5E7qeRqa8T35uG9a4JGgnDICg3qISPXn+ZNX4u61vXQu/r2YzTGn5
0b6G3X8YTCLti4w14/eGm9bMw3J5TLqRDg/d73B34ju6xcKPP83j/UmHFyxpNnGD
mg6mi8PyeEiwPbglSdVBaFQoOroK9Q==
=Hket
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF and isofs updates from Jan Kara:
"Several smaller fixes and cleanups in UDF and isofs"
* tag 'fs_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf_get_extendedattr() had no boundary checks.
isofs: joliet: Fix iocharset=utf8 mount option
udf: Fix iocharset=utf8 mount option
udf: Get rid of 0-length arrays in struct fileIdentDesc
udf: Get rid of 0-length arrays
udf: Remove unused declaration
udf: Check LVID earlier
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmO6kACgkQnJ2qBz9k
QNmP4wf+N4n3pDgCfEBPTFBMzghIqLfFSdRx713cj7u6Bi7qwZB90ChdgGC/J2lh
KVh9KvzneSqo4CoaYYLECDkM9cLGZuX0YEWX7L0+LivEoIVuoFK0OKDcyptKl5FK
fKi5tK287NlgXh9PqxuPlYUsaxQKh7PSqO4+9IgHFX/P7NMbxdRiGg8Nb+rp9XhP
IDzfR/qNqlyjYHJUae5GuE2hsbX8lFAkSnmQiz8ya6c3IZdc8GmaVL1jJI+ynre/
CMHysDV2QPS5UcMjO2YnoG3Osl18TOTsutnCDPzYI2qr4UGB+4RxfCgEVVdc6F3v
p4VfqfJB09sHpkRBrN9Lz+MgxxkVkQ==
=CRIk
-----END PGP SIGNATURE-----
Merge tag 'fiemap_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull FIEMAP cleanups from Jan Kara:
"FIEMAP cleanups from Christoph transitioning all remaining filesystems
supporting FIEMAP (ext2, hpfs) to iomap API and removing the old
helper"
* tag 'fiemap_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: remove generic_block_fiemap
hpfs: use iomap_fiemap to implement ->fiemap
ext2: use iomap_fiemap to implement ->fiemap
ext2: make ext2_iomap_ops available unconditionally
Let's only enable realtime discard if and only if device supports
discard functionality.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We must flush all the dirty data when enabling checkpoint back. Let's guarantee
that first by adding a retry logic on sync_inodes_sb(). In addition to that,
this patch adds to flush data in fsync when checkpoint is disabled, which can
mitigate the sync_inodes_sb() failures in advance.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to unmap pages from userspace process before removing pagecache
in punch_hole() like we did in f2fs_setattr().
Similar change:
commit 5e44f8c374 ("ext4: hole-punch use truncate_pagecache_range")
Fixes: fbfa2cc58d ("f2fs: add file operations")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In below path, it will return ENOENT if filesystem is shutdown:
- f2fs_map_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_page
- __get_node_page
- read_node_page
- is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN)
return -ENOENT
- force return value from ENOENT to 0
It should be fine for read case, since it indicates a hole condition,
and caller could use .m_next_pgofs to skip the hole and continue the
lookup.
However it may cause confusing for write case, since leaving a hole
there, and said nothing was wrong doesn't help.
There is at least one case from dax_iomap_actor() will complain that,
so fix this in prior to supporting dax in f2fs.
xfstest generic/388 reports below warning:
ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 485833 at fs/dax.c:1127 dax_iomap_actor+0x339/0x370
Call Trace:
iomap_apply+0x1c4/0x7b0
? dax_iomap_rw+0x1c0/0x1c0
dax_iomap_rw+0xad/0x1c0
? dax_iomap_rw+0x1c0/0x1c0
f2fs_file_write_iter+0x5ab/0x970 [f2fs]
do_iter_readv_writev+0x273/0x2e0
do_iter_write+0xab/0x1f0
vfs_iter_write+0x21/0x40
iter_file_splice_write+0x287/0x540
do_splice+0x37c/0xa60
__x64_sys_splice+0x15f/0x3a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
RIP: 0010:dax_iomap_pte_fault.isra.0+0x72e/0x14a0
Call Trace:
dax_iomap_fault+0x44/0x70
f2fs_dax_huge_fault+0x155/0x400 [f2fs]
f2fs_dax_fault+0x18/0x30 [f2fs]
__do_fault+0x4e/0x120
do_fault+0x3cf/0x7a0
__handle_mm_fault+0xa8c/0xf20
? find_held_lock+0x39/0xd0
handle_mm_fault+0x1b6/0x480
do_user_addr_fault+0x320/0xcd0
? rcu_read_lock_sched_held+0x67/0xc0
exc_page_fault+0x77/0x3f0
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
Fixes: 83a3bfdb5a ("f2fs: indicate shutdown f2fs to allow unmount successfully")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is a missing place we forgot to account .skipped_gc_rwsem, fix it.
Fixes: 6f8d445506 ("f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adjusts unlock order of .i_mmap_sem and .i_gc_rwsem for
cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't create discard thread when device doesn't support realtime discard
or user specifies nodiscard mount option.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmOoUACgkQnJ2qBz9k
QNm8XggA6cbU79idj2HgDG5Wj4X3cd1+NlpPP2HytvTomwqYHJmHPAg0b44AsfHT
ToHeYhIqb78MbLHn8fl4g5+O01raqihbUyIcRNcgdeQcle7Phuv/hDlsr8EOhfea
mec4vottwaoiNn+4o7ciUAIri0stbVL8VPpnOy0X7iCmX7OC2vUvhQQGwvyfmXZm
+F/8jppfvfsxl73SbWhG+sgD83D4ASZ+BGwC1Fx9tHitOVTJzg+CR2C1J4seaK6E
r8+u/K6YKSrCGgA2dOVgzYyp2vHPGbHS4Z3H1HDXS+mtqxHJYqPR54kRT1BqCEQX
Nm4CP7+u6a+86HLpBZi1NhvYrgLTig==
=LJaZ
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify speedups when notification actually isn't used and support
for identifying processes which caused fanotify events through pidfd
instead of normal pid"
* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize the case of no marks of any type
fsnotify: count all objects with attached connectors
fsnotify: count s_fsnotify_inode_refs for attached connectors
fsnotify: replace igrab() with ihold() on attach connector
fanotify: add pidfd support to the fanotify API
fanotify: introduce a generic info record copying helper
fanotify: minor cosmetic adjustments to fid labels
kernel/pid.c: implement additional checks upon pidfd_create() parameters
kernel/pid.c: remove static qualifier from pidfd_create()
Capitalize comments and end with period for better reading.
Also function comments are now little more kernel-doc style. This way we
can easily convert them to kernel-doc style if we want. Note that these
are not yet complete with this style. Example function comments start
with /* and in kernel-doc style they start /**.
Use imperative mood in function descriptions.
Change words like ntfs -> NTFS, linux -> Linux.
Use "we" not "I" when commenting code.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We allow updating normal timeouts, add support for adjusting timings of
linked timeouts as well.
Reported-by: Victor Stewart <v@nametag.social>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A preparation patch. Keep all queued linked timeout in a list, so they
may be found and updated.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than
CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC.
Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that
allows timeouts and linked timeouts to use the selected clock source.
Only one clock source may be selected, and we -EINVAL the request if more
than one is given. If neither BOOTIME nor REALTIME are selected, the
previous default of MONOTONIC is used.
Link: https://github.com/axboe/liburing/issues/369
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The recursion protection for eventfd_signal() is based on a per CPU
variable and relies on the !RT semantics of spin_lock_irqsave() for
protecting this per CPU variable. On RT kernels spin_lock_irqsave() neither
disables preemption nor interrupts which allows the spin lock held section
to be preempted. If the preempting task invokes eventfd_signal() as well,
then the recursion warning triggers.
Paolo suggested to protect the per CPU variable with a local lock, but
that's heavyweight and actually not necessary. The goal of this protection
is to prevent the task stack from overflowing, which can be achieved with a
per task recursion protection as well.
Replace the per CPU variable with a per task bit similar to other recursion
protection bits like task_struct::in_page_owner. This works on both !RT and
RT kernels and removes as a side effect the extra per CPU storage.
No functional change for !RT kernels.
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/87wnp9idso.ffs@tglx
After trunking is discovered in nfs4_discover_server_trunking(),
add the transport to the old client structure if the allowed limit
of transports has not been reached.
An example: there exists a multi-homed server and client mounts
one server address and some volume and then doest another mount to
a different address of the same server and perhaps a different
volume. Previously, the client checks that this is a session
trunkable servers (same server), and removes the newly created
client structure along with its transport. Now, the client
adds the connection from the 2nd mount into the xprt switch of
the existing client (it leads to having 2 available connections).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we are adding new transports via rpc_clnt_test_and_add_xprt()
then check if we've reached the limit. Currently only pnfs path
adds transports via that function but this is done in
preparation when the client would add new transports when
session trunking is detected. A warning is logged if the
limit is reached.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This option will control up to how many xprts can the client
establish to the server with a distinct address (that means
nconnect connections are not counted towards this new limit).
This patch is setting up nfs structures to keeep track of the
max_connect limit (does not enforce it).
The default value is kept at 1 so that no current mounts that
don't want any additional connections would be effected. The
maximum value is set at 16.
Mounts to DS are not limited to default value of 1 but instead
set to the maximum default value of 16 (NFS_MAX_TRANSPORTS).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
As eb96d5c97b ("SUNRPC handle EKEYEXPIRED in call_refreshresult")
commit handle EKEYEXPIRED in call_refreshresult, so there is only handle
when "task->tk_status" is equal "-EJUKEBOX" in nfs3_async_handle_jukebox.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Dan reported __write_overflow warning in ndr_read_string.
CC [M] fs/ksmbd/ndr.o
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/ksmbd/ndr.c:7:
In function memcpy,
inlined from ndr_read_string at fs/ksmbd/ndr.c:86:2,
inlined from ndr_decode_dos_attr at fs/ksmbd/ndr.c:167:2:
./include/linux/fortify-string.h:219:4: error: call to __write_overflow
declared with attribute error: detected write beyond size of object
__write_overflow();
^~~~~~~~~~~~~~~~~~
This seems to be a false alarm because hex_attr size is always smaller
than n->length. This patch fix this warning by allocation hex_attr with
n->length.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
req->buf_index is u16 and so we rely on registered buffers indexes
fitting into it. Add a build check, so when the upper limit for the
number of buffers is lifted we get a compliation fail but not lurking
problems.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/787e8e1a17cea51ca6301426b1c4c4887b8bd676.1629920396.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are three bugs in this code:
1) If indx_get_root() fails, then return -EINVAL instead of success.
2) On the "/* make root external */" -EOPNOTSUPP; error path it should
free "re" but it has a memory leak.
3) If indx_new() fails then it will lead to an error pointer dereference
when we call put_indx_node().
I've re-written the error handling to be more clear.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The "e" pointer is dereferenced before it has been checked for NULL.
Move the dereference after the NULL check to prevent an Oops.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Return -EINVAL if ni_find_attr() fails. Don't return success.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The ntfs_get_ea() function returns negative error codes or on success
it returns the length. In the original code a zero length return was
treated as -ENODATA and results in a NULL return. But it should be
treated as an invalid length and result in an PTR_ERR(-EINVAL) return.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Add a check for when the kzalloc() in init_rsttbl() fails. Some of
the callers checked for NULL and some did not. I went down the call
tree and added NULL checks where ever they were missing.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Use kcalloc/kmalloc_array over kzalloc/kmalloc when we allocate array.
Checkpatch found these after we did not use our own defined allocation
wrappers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Problem with these wrapper is that we cannot take off example GFP_NOFS
flag. It is not recomended use those in all places. Also if we change
one driver specific wrapper to kernel wrapper then it would look really
weird. People should be most familiar with kernel wrappers so let's just
use those ones.
Driver specific alloc wrapper also confuse some static analyzing tools,
good example is example kernels checkpatch tool. After we converter
these to kernel specific then warnings is showed.
Following Coccinelle script was used to automate changing.
virtual patch
@alloc depends on patch@
expression x;
expression y;
@@
(
- ntfs_malloc(x)
+ kmalloc(x, GFP_NOFS)
|
- ntfs_zalloc(x)
+ kzalloc(x, GFP_NOFS)
|
- ntfs_vmalloc(x)
+ kvmalloc(x, GFP_NOFS)
|
- ntfs_free(x)
+ kfree(x)
|
- ntfs_vfree(x)
+ kvfree(x)
|
- ntfs_memdup(x, y)
+ kmemdup(x, y, GFP_NOFS)
)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The static checkers (Smatch) were complaining because QuadAlign() was
buggy. If you try to align something higher than UINT_MAX it got
truncated to a u32.
Smatch warning was:
fs/ntfs3/attrib.c:383 attr_set_size_res()
warn: was expecting a 64 bit value instead of '~7'
So that this will not happen again we will change all these macros to
kernel made ones. This can also help some other static analyzing tools
to give us better warnings.
Patch was generated with Coccinelle script and after that some style
issue was hand fixed.
Coccinelle script:
virtual patch
@alloc depends on patch@
expression x;
@@
(
- #define QuadAlign(n) (((n) + 7u) & (~7u))
|
- QuadAlign(x)
+ ALIGN(x, 8)
|
- #define IsQuadAligned(n) (!((size_t)(n)&7u))
|
- IsQuadAligned(x)
+ IS_ALIGNED(x, 8)
|
- #define Quad2Align(n) (((n) + 15u) & (~15u))
|
- Quad2Align(x)
+ ALIGN(x, 16)
|
- #define IsQuad2Aligned(n) (!((size_t)(n)&15u))
|
- IsQuad2Aligned(x)
+ IS_ALIGNED(x, 16)
|
- #define Quad4Align(n) (((n) + 31u) & (~31u))
|
- Quad4Align(x)
+ ALIGN(x, 32)
|
- #define IsSizeTAligned(n) (!((size_t)(n) & (sizeof(size_t) - 1)))
|
- IsSizeTAligned(x)
+ IS_ALIGNED(x, sizeof(size_t))
|
- #define DwordAlign(n) (((n) + 3u) & (~3u))
|
- DwordAlign(x)
+ ALIGN(x, 4)
|
- #define IsDwordAligned(n) (!((size_t)(n)&3u))
|
- IsDwordAligned(x)
+ IS_ALIGNED(x, 4)
|
- #define WordAlign(n) (((n) + 1u) & (~1u))
|
- WordAlign(x)
+ ALIGN(x, 2)
|
- #define IsWordAligned(n) (!((size_t)(n)&1u))
|
- IsWordAligned(x)
+ IS_ALIGNED(x, 2)
|
)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
First of this fix one none utf8 char in this comment block. Maybe
this happened because error in filesystem ;)
Also this block was hard to read because long lines so make it max 80
long. And while we doing this stuff make little better grammer.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fix the following fallthrough warnings:
fs/ntfs3/inode.c:1792:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/ntfs3/index.c:178:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
This helps with the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In one source file there is for some reason non utf8 char. But hey this
is fs development so this kind of thing might happen.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Clang warns:
fs/ntfs3/fsntfs.c:1874:9: warning: variable 'cnt' set but not used
[-Wunused-but-set-variable]
size_t cnt, off;
^
1 warning generated.
It is indeed unused so remove it.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The multiplication of the u32 data_size with a int is being performed
using 32 bit arithmetic however the results is being assigned to the
variable nbits that is a size_t (64 bit) value. Fix a potential
integer overflow by casting the u32 value to a size_t before the
multiply to use a size_t sized bit multiply operation.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Add guards so that compiler will only include header files once.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We do not need our own implementation for this function in this
driver. It is much better to use generic one.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
There is a spelling mistake in a ntfs_err error message. Also
fix various spelling mistakes in comments.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Given a linkchain like this:
req0(link_flag)-->req1(link_flag)-->...-->reqn(no link_flag)
There is a problem:
- if some intermediate linked req like req1 's submittion fails, reqs
after it won't be cancelled.
- sqpoll disabled: maybe it's ok since users can get the error info
of req1 and stop submitting the following sqes.
- sqpoll enabled: definitely a problem, the following sqes will be
submitted in the next round.
The solution is to refactor the code logic to:
- if a linked req's submittion fails, just mark it and the head(if it
exists) as REQ_F_FAIL. Leverage req->result to indicate whether it
is failed or cancelled.
- submit or fail the whole chain when we come to the end of it.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210827094609.36052-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fscache_cookie_put() accesses the cookie it has just put inside the
tracepoint that monitors the change - but this is something it's not
allowed to do if we didn't reduce the count to zero.
Fix this by dropping most of those values from the tracepoint and grabbing
the cookie debug ID before doing the dec.
Also take the opportunity to switch over the usage and where arguments on
the tracepoint to put the reason last.
Fixes: a18feb5576 ("fscache: Add tracepoints")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431203107.2908479.3259582550347000088.stgit@warthog.procyon.org.uk/
The current hash algorithm used for hashing cookie keys is really bad,
producing almost no dispersion (after a test kernel build, ~30000 files
were split over just 18 out of the 32768 hash buckets).
Borrow the full_name_hash() hash function into fscache to do the hashing
for cookie keys and, in the future, volume keys.
I don't want to use full_name_hash() as-is because I want the hash value to
be consistent across arches and over time as the hash value produced may
get used on disk.
I can also optimise parts of it away as the key will always be a padded
array of aligned 32-bit words.
Fixes: ec0328e46d ("fscache: Maintain a catalogue of allocated cookies")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431201844.2908479.8293647220901514696.stgit@warthog.procyon.org.uk/
All callers already have a dax_device obtained from fs_dax_get_by_bdev
at hand, so just pass that to dax_supported() insted of doing another
lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210826135510.6293-10-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Refactor the DAX setup code in preparation of removing
bdev_dax_supported.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210826135510.6293-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Rename the main option text to clarify it is for file system access,
and add a bit of text that explains how to actually switch a nvdimm
to a fsdax capable state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210826135510.6293-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There's really no good reason not to, and e.g. trace-cmd
currently requires it for the temporary per-CPU files.
Hook up splice_write just like everyone else does.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Unlike other filesystems, NFSv3 tries to use fl_file in the GETLK case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the reexport case, nfsd is currently passing along locks with the
reclaim bit set. The client sends a new lock request, which is granted
if there's currently no conflict--even if it's possible a conflicting
lock could have been briefly held in the interim.
We don't currently have any way to safely grant reclaim, so for now
let's just deny them all.
I'm doing this by passing the reclaim bit to nfs and letting it fail the
call, with the idea that eventually the client might be able to do
something more forgiving here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As in the v4 case, it doesn't work well to block waiting for a lock on
an nfs filesystem.
As in the v4 case, that means we're depending on the client to poll.
It's probably incorrect to depend on that, but I *think* clients do poll
in practice. In any case, it's an improvement over hanging the lockd
thread indefinitely as we currently are.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFS implements blocking locks by blocking inside its lock method. In
the reexport case, this blocks the nfs server thread, which could lead
to deadlocks since an nfs server thread might be required to unlock the
conflicting lock. It also causes a crash, since the nfs server thread
assumes it can free the lock when its lm_notify lock callback is called.
Ideal would be to make the nfs lock method return without blocking in
this case, but for now it works just not to attempt blocking locks. The
difference is just that the original client will have to poll (as it
does in the v4.0 case) instead of getting a callback when the lock's
available.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmEntw0THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8CFB/4/1LVBiC2P9tqIr0S4rLaCBW91Xm4v
oYbqoEuzzzl9FPYndSka2hq5x8wg+0nBCXiejafYVbIZsvE/UN+C5+H1mCD5NwyO
imXHJ3lqKuZRHrGCkMSM3TJuOijPIU2gqVR+xb0vIfqjr0mU6YgLvvRBcY0QNimQ
gLPoMwFGYwGWSLdcBfnHYSGWzmJk4rE94SSkL9Rg1NjkPslBahOrpA/GwNbltGsU
+jYIWAZwpfgu2SCWPdUdYpA/Rw518WjGjZ9pOuZmFKg8R2mSJ4LVb5wZ4bsi1b5j
CGc4KjNV+koeSMBlBex1EDdVXvqxkviNiWP1jm4FKz/fWcpD5DWv5467
=t1nf
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two memory management fixes for the filesystem"
* tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client:
ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
ceph: correctly handle releasing an embedded cap flush
-----BEGIN PGP SIGNATURE-----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=jN7s
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that I think qualifies for a late merge. It's a revert of
a one-liner fix that meanwhile got backported to stable kernels and we
got reports from users.
The broken fix prevents creating compressed inline extents, which
could be noticeable on space consumption.
Technically it's a regression as the patch was merged in 5.14-rc1 but
got propagated to several stable kernels and has higher exposure than
a 'typical' development cycle bug"
* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: don't try to compress if we don't have enough pages"
Print all the offset, pos, and length quantities in hexadecimal. While
we're at it, update the types of the tracepoint structure fields to
match the types of the values being recorded in them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
RHBZ: 1994393
If we hit a STATUS_USER_SESSION_DELETED for the Create part in the
Create/QueryDirectory compound that starts a directory scan
we will leak EDEADLK back to userspace and surprise glibc and the application.
Pick this up initiate_cifs_search() and retry a small number of tries before we
return an error to userspace.
Cc: stable@vger.kernel.org
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MD4 support will likely be removed from the crypto directory, but
is needed for compression of NTLMSSP in SMB3 mounts.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
for SMB1.
This removes the dependency to DES.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
So far, the fscache implementation we had supports only
a small set of use cases. Particularly for files opened
with O_RDONLY.
This commit enables it even for rw based file opens. It
also enables the reuse of cached data in case of mount
option (cache=singleclient) where it is guaranteed that
this is the only client (and server) which operates on
the files. There's also a single line change in fscache.c
to get around a bug seen in fscache.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were incorrectly initializing the posix extensions in the
conversion to the new mount API.
CC: <stable@vger.kernel.org> # 5.11+
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.
Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.
So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.
Fixes: 066ce68994 ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not necessary to free the request back to slab when we fail to
get sqe, just move it to state->free_list.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210825175856.194299-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.
Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable). User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.
But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).
The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.
This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong. What matters is that it used to work.
So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes. It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.
Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a664 and 1b6b26ae70 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed. Probably because the stress-ng problem case ends up
being timing-dependent too.
It was then unwittingly fixed by commit 3a34b13a88 ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").
And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case. So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.
Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case. FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.
Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
ceph_mdsmap_destroy(m);
In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
kfree(m->m_info[i].export_targets);
To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.
[ jlayton: fix up whitespace damage
only kfree(m->m_info) if it's non-NULL ]
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.
When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.
Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.
At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads. It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52283
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Dan reported a new smatch warning [1]
"fs/erofs/inode.c:210 erofs_read_inode() error: double free of 'copied'"
Due to new chunk-based format handling logic, the error path can be
called after kfree(copied).
Set "copied = NULL" after kfree(copied) to fix this.
[1] https://lore.kernel.org/r/202108251030.bELQozR7-lkp@intel.com
Link: https://lore.kernel.org/r/20210825120757.11034-1-hsiangkao@linux.alibaba.com
Fixes: c5aa903a59 ("erofs: support reading chunk-based uncompressed files")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
This reverts commit f216562731.
[BUG]
It's no longer possible to create compressed inline extent after commit
f216562731 ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f216562731 ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As done with open opcodes, allow accept to skip installing fd into
processes' file tables and put it directly into io_uring's fixed file
table. Same restrictions and design as for open.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/6d16163f376fac7ac26a656de6b42199143e9721.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of opening a file into a process's file table as usual and then
registering the fd within io_uring, some users may want to skip the
first step and place it directly into io_uring's fixed file table.
This patch adds such a capability for IORING_OP_OPENAT and
IORING_OP_OPENAT2.
The behaviour is controlled by setting sqe->file_index, where 0 implies
the old behaviour using normal file tables. If non-zero value is
specified, then it will behave as described and place the file into a
fixed file slot sqe->file_index - 1. A file table should be already
created, the slot should be valid and empty, otherwise the operation
will fail.
Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and
EINVAL on inappropriate fixed tables, and return EBADF on collision with
already registered file.
Note: IOSQE_FIXED_FILE can't be used to switch between modes, because
accept takes a file, and it already uses the flag with a different
meaning.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When configfs_lookup() is executing list_for_each_entry(),
it is possible that configfs_dir_lseek() is calling list_del().
Some unfortunate interleavings of them can cause a kernel NULL
pointer dereference error
Thread 1 Thread 2
//configfs_dir_lseek() //configfs_lookup()
list_del(&cursor->s_sibling);
list_for_each_entry(sd, ...)
Fix this by grabbing configfs_dirent_lock in configfs_lookup()
while iterating ->s_children.
Signed-off-by: Sishuai Gong <sishuai@purdue.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Yup, the VFS hoist broke it, and nobody noticed. Bulkstat workloads
make it clear that it doesn't work as it should.
Fixes: dae2f8ed79 ("fs: Lift XFS_IDONTCACHE to the VFS layer")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Commit 3efee0567b4a ("fs: remove mandatory file locking support") removes
some operations in functions rw_verify_area().
As these functions are now simplified, do some syntactic clean-up as
follow-up to the removal as well, which was pointed out by compiler
warnings and static analysis.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
While prototyping a free space defragmentation tool, I observed an
unexpected IO error while running a sequence of commands that can be
recreated by the following sequence of commands:
# xfs_io -f -c "pwrite -S 0x58 -b 10m 0 10m" file1
# cp --reflink=always file1 file2
# punch-alternating -o 1 file2
# xfs_io -c "funshare 0 10m" file2
fallocate: Input/output error
I then scraped this (abbreviated) stack trace from dmesg:
WARNING: CPU: 0 PID: 30788 at fs/iomap/buffered-io.c:577 iomap_write_begin+0x376/0x450
CPU: 0 PID: 30788 Comm: xfs_io Not tainted 5.14.0-rc6-xfsx #rc6 5ef57b62a900814b3e4d885c755e9014541c8732
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:iomap_write_begin+0x376/0x450
RSP: 0018:ffffc90000c0fc20 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffffc90000c0fd10 RCX: 0000000000001000
RDX: ffffc90000c0fc54 RSI: 000000000000000c RDI: 000000000000000c
RBP: ffff888005d5dbd8 R08: 0000000000102000 R09: ffffc90000c0fc50
R10: 0000000000b00000 R11: 0000000000101000 R12: ffffea0000336c40
R13: 0000000000001000 R14: ffffc90000c0fd10 R15: 0000000000101000
FS: 00007f4b8f62fe40(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056361c554108 CR3: 000000000524e004 CR4: 00000000001706f0
Call Trace:
iomap_unshare_actor+0x95/0x140
iomap_apply+0xfa/0x300
iomap_file_unshare+0x44/0x60
xfs_reflink_unshare+0x50/0x140 [xfs 61947ea9b3a73e79d747dbc1b90205e7987e4195]
xfs_file_fallocate+0x27c/0x610 [xfs 61947ea9b3a73e79d747dbc1b90205e7987e4195]
vfs_fallocate+0x133/0x330
__x64_sys_fallocate+0x3e/0x70
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4b8f79140a
Looking at the iomap tracepoints, I saw this:
iomap_iter: dev 8:64 ino 0x100 pos 0 length 0 flags WRITE|0x80 (0x81) ops xfs_buffered_write_iomap_ops caller iomap_file_unshare
iomap_iter_dstmap: dev 8:64 ino 0x100 bdev 8:64 addr -1 offset 0 length 131072 type DELALLOC flags SHARED
iomap_iter_srcmap: dev 8:64 ino 0x100 bdev 8:64 addr 147456 offset 0 length 4096 type MAPPED flags
iomap_iter: dev 8:64 ino 0x100 pos 0 length 4096 flags WRITE|0x80 (0x81) ops xfs_buffered_write_iomap_ops caller iomap_file_unshare
iomap_iter_dstmap: dev 8:64 ino 0x100 bdev 8:64 addr -1 offset 4096 length 4096 type DELALLOC flags SHARED
console: WARNING: CPU: 0 PID: 30788 at fs/iomap/buffered-io.c:577 iomap_write_begin+0x376/0x450
The first time funshare calls ->iomap_begin, xfs sees that the first
block is shared and creates a 128k delalloc reservation in the COW fork.
The delalloc reservation is returned as dstmap, and the shared block is
returned as srcmap. So far so good.
funshare calls ->iomap_begin to try the second block. This time there's
no srcmap (punch-alternating punched it out!) but we still have the
delalloc reservation in the COW fork. Therefore, we again return the
reservation as dstmap and the hole as srcmap. iomap_unshare_iter
incorrectly tries to unshare the hole, which __iomap_write_begin rejects
because shared regions must be fully written and therefore cannot
require zeroing.
Therefore, change the buffered write iomap_begin function not to set
IOMAP_F_SHARED when there isn't a source mapping to read from for the
unsharing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
We shouldn't really be using a read-only file descriptor to take a write
lock.
Most filesystems will put up with it. But NFS, for example, won't.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
IORING_OP_LINKAT behaves like linkat(2) and takes the same flags and
arguments.
In some internal places 'hardlink' is used instead of 'link' to avoid
confusion with the SQE links. Name 'link' conflicts with the existing
'link' member of io_kiocb.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-12-dkadashev@gmail.com
[axboe: add splice_fd_in check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_alloc_kiocb to dip into the percpu cache of bios when the
caller asks for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark polled IO as being safe for dipping into the bio allocation
cache, in case the targeted bio_set has it enabled.
This brings an IOPOLL gen2 Optane QD=128 workload from ~3.2M IOPS to
~3.5M IOPS.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 1 PID: 5870 at fs/io_uring.c:5975 io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975
CPU: 0 PID: 5870 Comm: iou-wrk-5860 Not tainted 5.14.0-rc6-next-20210820-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975
Call Trace:
io_async_cancel fs/io_uring.c:6014 [inline]
io_issue_sqe+0x22d5/0x65a0 fs/io_uring.c:6407
io_wq_submit_work+0x1dc/0x300 fs/io_uring.c:6511
io_worker_handle_work+0xa45/0x1840 fs/io-wq.c:533
io_wqe_worker+0x2cc/0xbb0 fs/io-wq.c:582
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
io_try_cancel_userdata() can be called from io_async_cancel() executing
in the io-wq context, so the warning fires, which is there to alert
anyone accessing task->io_uring->io_wq in a racy way. However,
io_wq_put_and_exit() always first waits for all threads to complete,
so the only detail left is to zero tctx->io_wq after the context is
removed.
note: one little assumption is that when IO_WQ_WORK_CANCEL, the executor
won't touch ->io_wq, because io_wq_destroy() might cancel left pending
requests in such a way.
Cc: stable@vger.kernel.org
Reported-by: syzbot+b0c9d1588ae92866515f@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dfdd37a80cfa9ffd3e59538929c99cdd55d8699e.1629721757.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update the following to return int rather than long, for uniformity with
the rest of the do_* helpers in namei.c:
* do_rmdir()
* do_unlinkat()
* do_mkdirat()
* do_mknodat()
* do_symlinkat()
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/20210514143202.dmzfcgz5hnauy7ze@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-9-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in the struct filename pointers instead of the user string, for
uniformity with do_renameat2, do_unlinkat, do_mknodat, etc.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-8-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a couple of places where we already open-code the (flags &
AT_EMPTY_PATH) check and io_uring will likely add another one in the
future. Let's just add a simple helper getname_uflags() that handles
this directly and use it.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/20210415100815.edrn4a7cy26wkowe@wittgenstein/
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-7-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in the struct filename pointers instead of the user string, for
uniformity with the recently converted do_mkdnodat(), do_unlinkat(),
do_renameat(), do_mkdirat().
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-6-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in the struct filename pointers instead of the user string, for
uniformity with the recently converted do_unlinkat(), do_renameat(),
do_mkdirat().
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-5-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in the struct filename pointers instead of the user string, and
update the three callers to do the same. This is heavily based on
commit dbea8d345177 ("fs: make do_renameat2() take struct filename").
This behaves like do_unlinkat() and do_renameat2().
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-4-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 5c31b6cedb ("namei: saner calling conventions for
filename_parentat()") filename_parentat() had the following behavior WRT
the passed in struct filename *:
* On error the name is consumed (putname() is called on it);
* On success the name is returned back as the return value;
Now there is a need for filename_create() and filename_lookup() variants
that do not consume the passed filename, and following the same "consume
the name only on error" semantics is proven to be hard to reason about
and result in confusing code.
Hence this preparation change splits filename_parentat() into two: one
that always consumes the name and another that never consumes the name.
This will allow to implement two filename_create() variants in the same
way, and is a consistent and hopefully easier to reason about approach.
Link: https://lore.kernel.org/io-uring/CAOKbgA7MiqZAq3t-HDCpSGUFfco4hMA9ArAE-74fTpU+EkvKPw@mail.gmail.com/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-3-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Supporting ERR/NULL names in putname() makes callers code cleaner, and
is what some other path walking functions already support for the same
reason.
This also removes a few existing IS_ERR checks before putname().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/CAHk-=wgCac9hBsYzKMpHk0EbLgQaXR=OUAjHaBtaY+G8A9KhFg@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-2-dkadashev@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Employ inline completion logic for read/write completions done via
io_req_task_complete(). If ->uring_lock is contended, just do normal
request completion, but if not, make tctx_task_work() to grab the lock
and do batched inline completions in io_req_task_complete().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/94589c3ce69eaed86a21bb1ec696407a54fab1aa.1629286357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many task_work handlers either grab ->uring_lock, or may benefit from
having it. Move locking logic out of individual handlers to a lazy
approach controlled by tctx_task_work(), so we don't keep doing
tons of mutex lock/unlock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6a34e147f2507a2f3e2fa1e38a9c541dcad3929.1629286357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've previously had an issue where overflow flush unconditionally calls
io_cqring_ev_posted() even if it didn't flush any events to the ring,
causing wake and eventfd increment where no new events are available.
Some applications don't like that, see commit b18032bb0a for details.
This came up in discussion for another patch recently, hence add a
comment detailing what the relationship between calling the events
posted helper and CQ ring entries is.
Link: https://lore.kernel.org/io-uring/77a44fce-c831-16a6-8e80-9aee77f496a2@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
coml_nr in ctx_flush_and_put() is not protected by uring_lock, this
may cause problems when accessing in parallel:
say coml_nr > 0
ctx_flush_and put other context
if (compl_nr) get mutex
coml_nr > 0
do flush
coml_nr = 0
release mutex
get mutex
do flush (*)
release mutex
in (*) place, we call io_cqring_ev_posted() and users likely get
no events there. To avoid spurious events, re-check the value when
under the lock.
Fixes: 2c32395d81 ("io_uring: fix __tctx_task_work() ctx race")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210820221954.61815-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now allocated rsrc table uses PAGE_SIZE as the size of 2nd-level, and
accessing this table relies on each level index from fixed TABLE_SHIFT
(12 - 3) in 4k page case. In order to correctly work in non-4k page,
define TABLE_SHIFT as non-fixed (PAGE_SHIFT - shift of data) for
2nd-level table entry number.
Signed-off-by: wangyangbo <wangyangbo@uniontech.com>
Link: https://lore.kernel.org/r/20210819055657.27327-1-wangyangbo@uniontech.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now with IRQ completions done via IRQ, almost all requests freeing
are done from the context of submitter task, so it makes sense to
extend task_put optimisation from io_req_free_batch_finish() to cover
all the cases including task_work by moving it into io_put_task().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/824a7cbd745ddeee4a0f3ff85c558a24fd005872.1629302453.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have two checks of task->flags & PF_EXITING left:
1) In io_req_task_submit(), which is called in task_work and hence always
in the context of the original task. That means that
req->task == current, and hence checking ->flags is totally fine.
2) In io_poll_rewait(), where we need to stop re-arming poll to prevent
it interfering with cancelation. This is only run from task_work as
well, and hence for this case too req->task == current.
Add a comment to both spots detailing that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need to protect nr_running and worker_refs by wqe->lock, so
narrow the range of raw_spin_lock_irq - raw_spin_unlock_irq
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210810125554.99229-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move earlier the check for whether __io_queue_proc() tries to poll
already polled waitqueue, and do the same for the second poll entry, if
any. Shouldn't really matter, but at least it would have a more
predictable behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8cb428cfe8ade0fd055859fabb878db8777d4c2f.1629228203.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have io_req_complete_post() to post a CQE and put the request. It
takes care of all synchronisation and is more concise and efficent, so
replace all hancoded occurrences of
"lock; post CQE; unlock; + put_req()" with io_req_complete_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2c83463458a613f9d870e5147eb134da2aa70779.1629228203.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linked timeout handling during issuing is heavy, it adds extra
instructions and forces to save the next linked timeout before
io_issue_sqe().
Follwing the same reasoning as in refcounting patches, a request can't
be freed by the time it returns from io_issue_sqe(), so now we don't
need to do io_prep_linked_timeout() in advance, and it can be delayed to
colder paths optimising the generic path.
Also, it should also save quite a lot for requests with linked timeouts
and completed inline on timeout spinlocking + hrtimer_start() +
hrtimer_try_to_cancel() and so on.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/19bfc9a0d26c5c5f1e359f7650afe807ca8ef879.1628981736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tracking linked timeouts as infligh was needed to make sure that io-wq
is not destroyed by io_uring_cancel_generic() racing with
io_async_cancel_one() accessing it. Now, cancellations issued by linked
timeouts are done in the task context, so it's already synchronised.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1b05cf47cb69df2305efdbee8cf7ba36f46c1a3.1628981736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_free_batch() has a __must_hold annotation referencing a
request being passed in, but we're passing in the context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can merge two spin_unlock() operations to one since we removed some
code not long ago.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When doing cancellation, we use a parameter to indicate where it's from
do_exit or exec. So a boolean value is good enough for this, remove the
struct files* as it is not necessary.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: fixup io_uring_files_cancel for !CONFIG_IO_URING]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As submission references are gone, there is only one initial reference
left. Instead of actually doing atomic refcounting, add a flag
indicating whether we're going to take more refs or doing any other sync
magic. The flag should be set before the request may get used in
parallel.
Together with the previous patch it saves 2 refcount atomics per request
for IOPOLL and IRQ completions, and 1 atomic per req for inline
completions, with some exceptions. In particular, currently, there are
three cases, when the refcounting have to be enabled:
- Polling, including apoll. Because double poll entries takes a ref.
Might get relaxed in the near future.
- Link timeouts, enabled for both, the timeout and the request it's
bound to, because they work in-parallel and we need to synchronise
to cancel one of them on completion.
- When a request gets in io-wq, because it doesn't hold uring_lock and
we need guarantees of submission references.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8b204b6c5f6643062270a1913d6d3a7f8f795fd9.1628705069.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Requests are by default given with two references, submission and
completion. Completion references are straightforward, they represent
request ownership and are put when a request is completed or so.
Submission references are a bit more trickier. They're needed when
io_issue_sqe() followed deep into the submission stack (e.g. in fs,
block, drivers, etc.), request may have given away for concurrent
execution or already completed, and the code unwinding back to
io_issue_sqe() may be accessing some pieces of our requests, e.g.
file or iov.
Now, we prevent such async/in-depth completions by pushing requests
through task_work. Punting to io-wq is also done through task_works,
apart from a couple of cases with a pretty well known context. So,
there're two cases:
1) io_issue_sqe() from the task context and protected by ->uring_lock.
Either requests return back to io_uring or handed to task_work, which
won't be executed because we're currently controlling that task. So,
we can be sure that requests are staying alive all the time and we don't
need submission references to pin them.
2) io_issue_sqe() from io-wq, which doesn't hold the mutex. The role of
submission reference is played by io-wq reference, which is put by
io_wq_submit_work(). Hence, it should be fine.
Considering that, we can carefully kill the submission reference.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6b68f1c763229a590f2a27148aee77767a8d7750.1628705069.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have no hard/soft IRQ users of this lock left, remove any IRQ
disabling/saving and restoring when grabbing this lock.
This is straight forward with no users entering with IRQs disabled
anymore, the only thing to look out for is the waitqueue poll head
lock which nests inside the completion lock. That needs IRQs disabled,
and hence we have to do that now instead of relying on the outer lock
doing so.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation to making the completion lock work outside of
hard/soft IRQ context.
Add a timeout_lock to handle the ordering of timeout completions or
cancelations with the timeouts actually triggering.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For requests with non-fixed files, instead of grabbing just one
reference, we get by the number of left requests, so the following
requests using the same file can take it without atomics.
However, it's not all win. If there is one request in the middle
not using files or having a fixed file, we'll need to put back the left
references. Even worse if an application submits requests dealing with
different files, it will do a put for each new request, so doubling the
number of atomics needed. Also, even if not used, it's still takes some
cycles in the submission path.
If a file used many times, it rather makes sense to pre-register it, if
not, we may fall in the described pitfall. So, this optimisation is a
matter of use case. Go with the simpliest code-wise way, remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After recent fixes, tctx_task_work() always does proper spinlocking
before looking into ->task_list, so now we don't need atomics for
->task_state, replace it with non-atomic task_running using the critical
section.
Tide it up, combine two separate block with spinlocking, and always try
to splice in there, so we do less locking when new requests are arriving
during the function execution.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fix missing ->task_running reset on task_work_add() failure]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We cache all the reference to task + tctx, so if io_put_task() is
called by the corresponding task itself, we can save on atomics and
return the refs right back into the cache.
It's beneficial for all inline completions, and also iopolling, when
polling and submissions are done by the same task, including
SQPOLL|IOPOLL.
Note: io_uring_cancel_generic() can return refs to the cache as well,
so those should be flushed in the loop for tctx_inflight() to work
right.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6fe9646b3cb70e46aca1f58426776e368c8926b3.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_ring_exit_work() can't get it done in 5 minutes, something is
going very wrong, don't keep spinning at HZ / 20 rate, it doesn't help
and it may take much of CPU time if there is a lot of workers stuck as
such.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9e2d1ca81d569f6bc628af1a42ff6663bff7ce9c.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Turns out we always init struct io_wait_queue in io_cqring_wait(), even
if it's not used after, i.e. there are already enough of CQEs. And often
it's exactly what happens, for instance, requests may have been
completed inline, or in case of io_uring_enter(submit=N, wait=1).
It shows up in my profiler, so optimise it by delaying the struct init.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6f1b81c60b947d165583dc333947869c3d85d037.1628471125.git.asml.silence@gmail.com
[axboe: fixed up for new cqring wait]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOPOLL users should care more about getting completions for requests
they submitted, but not in "device did/completed something". Currently,
io_do_iopoll() may return a positive number, which will instruct
io_iopoll_check() to break the loop and end the syscall, even if there
is not enough CQEs or none at all.
Don't return positive numbers, so io_iopoll_check() exits only when it
gets an actual error, need reschedule or got enough CQEs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/641a88f751623b6758303b3171f0a4141f06726e.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We prefer nornal task_works even if it would fail requests inside. Kill
a PF_EXITING check in io_req_task_work_add(), task_work_add() handles
well dying tasks, i.e. return error when can't enqueue due to late
stages of do_exit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fc14297e8441cd8f5d1743a2488cf0df09bf48ac.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we use fixed files, we can be sure (almost) that REQ_F_ISREG is set.
However, for non-reg files io_prep_rw() still will look into inode to
double check, and that's expensive and can be avoided.
The only caveat is that it only currently works with 64+ bit
architectures, see FFS_ISREG, so we should consider that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0a62780c491ca2522cd52db4ae3f16e03aafed0f.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Optimise io_file_get() with registered files, which is in a hot path,
by inlining parts of the function. Saves a function call, and
inefficiencies of passing arguments, e.g. evaluating
(sqe_flags & IOSQE_FIXED_FILE).
It couldn't have been done before as compilers were refusing to inline
it because of the function size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/52115cd6ce28f33bd0923149c0e6cb611084a0b1.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of hand-coded two-level tables for registered files, allocate
them with kvmalloc(). In many cases small enough tables are enough, and
so can be kmalloc()'ed removing an extra memory load and a bunch of bit
logic instructions from the hot path. If the table is larger, we trade
off all the pros with a TLB-assisted memory lookup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/280421d3b48775dabab773006bb5588c7b2dabc0.1628471125.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we only wake the first waiter, even if we have enough entries
posted to satisfy multiple waiters. Improve that situation so that
every waiter knows how much the CQ tail has to advance before they can
be safely woken up.
With this change, if we have N waiters each asking for 1 event and we get
4 completions, then we wake up 4 waiters. If we have N waiters asking
for 2 completions and we get 4 completions, then we wake up the first
two. Previously, only the first waiter would've been woken up.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Daniel reports that the v5.14-rc4-rt4 kernel throws a BUG when running
stress-ng:
| [ 90.202543] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:35
| [ 90.202549] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2047, name: iou-wrk-2041
| [ 90.202555] CPU: 5 PID: 2047 Comm: iou-wrk-2041 Tainted: G W 5.14.0-rc4-rt4+ #89
| [ 90.202559] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| [ 90.202561] Call Trace:
| [ 90.202577] dump_stack_lvl+0x34/0x44
| [ 90.202584] ___might_sleep.cold+0x87/0x94
| [ 90.202588] rt_spin_lock+0x19/0x70
| [ 90.202593] ___slab_alloc+0xcb/0x7d0
| [ 90.202598] ? newidle_balance.constprop.0+0xf5/0x3b0
| [ 90.202603] ? dequeue_entity+0xc3/0x290
| [ 90.202605] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202610] ? pick_next_task_fair+0xb9/0x330
| [ 90.202612] ? __schedule+0x670/0x1410
| [ 90.202615] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202618] kmem_cache_alloc_trace+0x79/0x1f0
| [ 90.202621] io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202625] io_wq_worker_sleeping+0x37/0x50
| [ 90.202628] schedule+0x30/0xd0
| [ 90.202630] schedule_timeout+0x8f/0x1a0
| [ 90.202634] ? __bpf_trace_tick_stop+0x10/0x10
| [ 90.202637] io_wqe_worker+0xfd/0x320
| [ 90.202641] ? finish_task_switch.isra.0+0xd3/0x290
| [ 90.202644] ? io_worker_handle_work+0x670/0x670
| [ 90.202646] ? io_worker_handle_work+0x670/0x670
| [ 90.202649] ret_from_fork+0x22/0x30
which is due to the RT kernel not liking a GFP_ATOMIC allocation inside
a raw spinlock. Besides that not working on RT, doing any kind of
allocation from inside schedule() is kind of nasty and should be avoided
if at all possible.
This particular path happens when an io-wq worker goes to sleep, and we
need a new worker to handle pending work. We currently allocate a small
data item to hold the information we need to create a new worker, but we
can instead include this data in the io_worker struct itself and just
protect it with a single bit lock. We only really need one per worker
anyway, as we will have run pending work between to sleep cycles.
https://lore.kernel.org/lkml/20210804082418.fbibprcwtzyt5qax@beryllium.lan/
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If all free_nat_bitmap are available, we can rebuild nat_bits from
free_nat_bitmap entirely during umount, let's make another chance
to reenable nat_bits for image.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added F2FS_IOSTAT config option to support getting IO statistics through
sysfs and printing out periodic IO statistics tracepoint events and
moved I/O statistics related codes into separate files for better
maintenance.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
[Jaegeuk Kim: set default=y]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Update comment to reflect that we *do* allow reexport, whether it's a
good idea or not....
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Make this lookup slightly more concise, and prepare for changing how we
look this up in a following patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a6166768 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When parsing the ExtendedAttr data, malicous or corrupt attribute length
could cause kernel hangs and buffer overruns in some special cases.
Link: https://lore.kernel.org/r/20210822093332.25234-1-stian.skjelstad@gmail.com
Signed-off-by: Stian Skjelstad <stian.skjelstad@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b81 ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A common characteristic of the bug report where preemptive flushing was
going full tilt was the fact that the vast majority of the free metadata
space was used up by the global reserve. The hard 90% threshold would
cover the majority of these cases, but to be even smarter we should take
into account how much of the outstanding reservations are covered by the
global block reserve. If the global block reserve accounts for the vast
majority of outstanding reservations, skip preemptive flushing, as it
will likely just cause churn and pain.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The preemptive flushing code was added in order to avoid needing to
synchronously wait for ENOSPC flushing to recover space. Once we're
almost full however we can essentially flush constantly. We were using
98% as a threshold to determine if we were simply full, however in
practice this is a really high bar to hit. For example reports of
systems running into this problem had around 94% usage and thus
continued to flush. Fix this by lowering the threshold to 90%, which is
a more sane value, especially for smaller file systems.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
CC: stable@vger.kernel.org # 5.12+
Fixes: 576fa34830 ("btrfs: improve preemptive background space flushing")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_lookup_data_extent calls btrfs_search_slot to verify if
the EXTENT_ITEM exists in the extent tree. btrfs_search_slot can return
values bellow zero if an error happened.
Function replay_one_extent currently checks if the search found
something (0 returned) and increments the reference, and if not, it
seems to evaluate as 'not found'.
Fix the condition by checking if the value was bellow zero and return
early.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cases where when logging an inode we need to log its
parent directories or logging subdirectories when logging a directory.
There are cases however where we end up logging a directory even if it was
not changed in the current transaction, no dentries added or removed since
the last transaction. While this is harmless from a functional point of
view, it is a waste time as it brings no advantage.
One example where this is triggered is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ mkdir /mnt/C
$ touch /mnt/A/foo
$ ln /mnt/A/foo /mnt/B/bar
$ ln /mnt/A/foo /mnt/C/baz
$ sync
$ rm -f /mnt/A/foo
$ xfs_io -c "fsync" /mnt/B/bar
This last fsync ends up logging directories A, B and C, however we only
need to log directory A, as B and C were not changed since the last
transaction commit.
So fix this by changing need_log_inode(), to return false in case the
given inode is a directory and has a ->last_trans value smaller than the
current transaction's ID.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we converted btrfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag. We only need to raise this flag on the btrfs_root_fs_type
filesystem since btrfs_mount_root() is ultimately responsible for
allocating the superblock and is called into from btrfs_mount()
associated with btrfs_fs_type.
The conversion of the btrfs inode operations was straightforward.
Regarding btrfs specific ioctls that perform checks based on inode
permissions only those have been allowed that are not filesystem wide
operations and hence can be reasonably charged against a specific mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the ACL code idmapped mount aware. The POSIX default and POSIX
access ACLs are the only ACLs other than some specific xattrs that take
DAC permissions into account. On an idmapped mount they need to be
translated according to the mount's userns. The main change is done to
__btrfs_set_acl() which is responsible for translating POSIX ACLs to
their final on-disk representation.
The btrfs_init_acl() helper does not need to take the idmapped mount
into account since it is called in the context of file creation
operations (mknod, create, mkdir, symlink, tmpfile) and is used for
btrfs_init_inode_security() to copy POSIX default and POSIX access
permissions from the parent directory. These ACLs need to be inherited
unmodified from the parent directory. This is identical to what we do
for ext4 and xfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The INO_LOOKUP_USER is an unprivileged version of the INO_LOOKUP ioctl
and has the following restrictions. The main difference between the two
is that INO_LOOKUP is filesystem wide operation wheres INO_LOOKUP_USER
is scoped beneath the file descriptor passed with the ioctl.
Specifically, INO_LOOKUP_USER must adhere to the following restrictions:
- The caller must be privileged over each inode of each path component
for the path they are trying to lookup.
- The path for the subvolume the caller is trying to lookup must be reachable
from the inode associated with the file descriptor passed with the ioctl.
The second condition makes it possible to scope the lookup of the path
to the mount identified by the file descriptor passed with the ioctl.
This allows us to enable this ioctl on idmapped mounts.
Specifically, this is possible because all child subvolumes of a parent
subvolume are reachable when the parent subvolume is mounted. So if the
user had access to open the parent subvolume or has been given the fd
then they can lookup the path if they had access to it provided they
were privileged over each path component.
Note, the INO_LOOKUP_USER ioctl allows a user to learn the path and name
of a subvolume even though they would otherwise be restricted from doing
so via regular VFS-based lookup.
So think about a parent subvolume with multiple child subvolumes.
Someone could mount he parent subvolume and restrict access to the child
subvolumes by overmounting them with empty directories. At this point
the user can't traverse the child subvolumes and they can't open files
in the child subvolumes. However, they can still learn the path of
child subvolumes as long as they have access to the parent subvolume by
using the INO_LOOKUP_USER ioctl.
The underlying assumption here is that it's ok that the lookup ioctls
can't really take mounts into account other than the original mount the
fd belongs to during lookup. Since this assumption is baked into the
original INO_LOOKUP_USER ioctl we can extend it to idmapped mounts.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Setting flags on subvolumes or snapshots are core features of btrfs. The
SUBVOL_SETFLAGS ioctl is especially important as it allows to make
subvolumes and snapshots read-only or read-write. Allow setting flags on
btrfs subvolumes and snapshots on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The SET_RECEIVED_SUBVOL ioctls are used to set information about
a received subvolume. Make it possible to set information about a
received subvolume on idmapped mounts. This is a fairly straightforward
operation since all the permission checking helpers are already capable
of handling idmapped mounts. So we just need to pass down the mount's
userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So far we prevented the deletion of subvolumes and snapshots using
subvolume ids possible with the BTRFS_SUBVOL_SPEC_BY_ID flag.
This restriction is necessary on idmapped mounts as this allows
filesystem wide subvolume and snapshot deletions and thus can escape the
scope of what's exposed under the mount identified by the fd passed with
the ioctl.
Deletion by subvolume id works by looking for an alias of the parent of
the subvolume or snapshot to be deleted. The parent alias can be
anywhere in the filesystem. However, as long as the alias of the parent
that is found is the same as the one identified by the file descriptor
passed through the ioctl we can allow the deletion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Destroying subvolumes and snapshots are important features of btrfs.
Both operations are available to unprivileged users if the filesystem
has been mounted with the "user_subvol_rm_allowed" mount option. Allow
subvolume and snapshot deletion on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Subvolumes and snapshots can either be deleted by specifying their name
or - if BTRFS_IOC_SNAP_DESTROY_V2 is used - by their subvolume or
snapshot id if the BTRFS_SUBVOL_SPEC_BY_ID is set.
This feature is blocked on idmapped mounts as this allows filesystem
wide subvolume deletions and thus can escape the scope of what's exposed
under the mount identified by the fd passed with the ioctl.
This means that even the root or CAP_SYS_ADMIN capable user can't delete
a subvolume via BTRFS_SUBVOL_SPEC_BY_ID. This is intentional.
The root user is currently already subject to permission checks in
btrfs_may_delete() including whether the inode's i_uid/i_gid of the
directory the subvolume is located in have a mapping in the caller's
idmapping. For this to fail isn't currently possible since a btrfs
filesystem can't be mounted with a non-initial idmapping but it shows
that even the root user would fail to delete a subvolume if the relevant
inode isn't mapped in their idmapping. The idmapped mount case is the
same in principle.
This isn't a huge problem a root user wanting to delete arbitrary
subvolumes can just always create another (even detached) mount without
an idmapping attached.
In addition, we will allow BTRFS_SUBVOL_SPEC_BY_ID for cases where the
subvolume to delete is directly located under inode referenced by the fd
passed for the ioctl() in a follow-up commit.
Here is an example where a btrfs subvolume is deleted through a
subvolume mount that does not expose the subvolume to be delete but it
can still be deleted by using the subvolume id:
/* Compile the following program as "delete_by_spec". */
#define _GNU_SOURCE
#include <fcntl.h>
#include <inttypes.h>
#include <linux/btrfs.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
static int rm_subvolume_by_id(int fd, uint64_t subvolid)
{
struct btrfs_ioctl_vol_args_v2 args = {};
int ret;
args.flags = BTRFS_SUBVOL_SPEC_BY_ID;
args.subvolid = subvolid;
ret = ioctl(fd, BTRFS_IOC_SNAP_DESTROY_V2, &args);
if (ret < 0)
return -1;
return 0;
}
int main(int argc, char *argv[])
{
int subvolid = 0;
if (argc < 3)
exit(1);
fprintf(stderr, "Opening %s\n", argv[1]);
int fd = open(argv[1], O_CLOEXEC | O_DIRECTORY);
if (fd < 0)
exit(2);
subvolid = atoi(argv[2]);
fprintf(stderr, "Deleting subvolume with subvolid %d\n", subvolid);
int ret = rm_subvolume_by_id(fd, subvolid);
if (ret < 0)
exit(3);
exit(0);
}
#include <stdio.h>"
#include <stdlib.h>"
#include <linux/btrfs.h"
truncate -s 10G btrfs.img
mkfs.btrfs btrfs.img
export LOOPDEV=$(sudo losetup -f --show btrfs.img)
mount ${LOOPDEV} /mnt
sudo chown $(id -u):$(id -g) /mnt
btrfs subvolume create /mnt/A
btrfs subvolume create /mnt/B/C
# Get subvolume id via:
sudo btrfs subvolume show /mnt/A
# Save subvolid
SUBVOLID=<nr>
sudo umount /mnt
sudo mount ${LOOPDEV} -o subvol=B/C,user_subvol_rm_allowed /mnt
./delete_by_spec /mnt ${SUBVOLID}
With idmapped mounts this can potentially be used by users to delete
subvolumes/snapshots they would otherwise not have access to as the
idmapping would be applied to an inode that is not exposed in the mount
of the subvolume.
The fact that this is a filesystem wide operation suggests it might be a
good idea to expose this under a separate ioctl that clearly indicates
this. In essence, the file descriptor passed with the ioctl is merely
used to identify the filesystem on which to operate when
BTRFS_SUBVOL_SPEC_BY_ID is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Creating subvolumes and snapshots is one of the core features of btrfs
and is even available to unprivileged users. Make it possible to use
subvolume and snapshot creation on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a new subvolume is created btrfs currently doesn't check whether
the fsgid/fsuid of the caller actually have a mapping in the user
namespace attached to the filesystem. The VFS always checks this to make
sure that the caller's fsgid/fsuid can be represented on-disk. This is
most relevant for filesystems that can be mounted inside user namespaces
but it is in general a good hardening measure to prevent unrepresentable
gid/uid from being written to disk.
Since we want to support idmapped mounts for btrfs ioctls to create
subvolumes in follow-up patches this becomes important since we want to
make sure the fsgid/fsuid of the caller as mapped according to the
idmapped mount can be represented on-disk. Simply add the missing
fsuidgid_has_mapping() line from the VFS may_create() version to
btrfs_may_create().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_tmpfile() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_symlink() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mkdir() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_create() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mknod() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_rename() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend btrfs_new_inode() to take the idmapped mount into account when
initializing a new inode. This is just a matter of passing down the
mount's userns. The rest is taken care of in inode_init_owner(). This is
a preliminary patch to make the individual btrfs inode operations
idmapped mount aware.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Various filesystems rely on the lookup_one_len() helper to lookup a
single path component relative to a well-known starting point. Allow
such filesystems to support idmapped mounts by adding a version of this
helper to take the idmap into account when calling inode_permission().
This change is a required to let btrfs (and other filesystems) support
idmapped mounts.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sysfs file has grown big. It takes some time to locate the correct
struct attribute to add new files. Create a table and map the struct
attribute to its sysfs path.
Also, fix the comment about the debug sysfs path. And add the comments
to the attributes instead of attribute group, where sysfs file names are
defined.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
It's easy to trigger NULL pointer dereference, just by removing a
non-existing device id:
# mkfs.btrfs -f -m single -d single /dev/test/scratch1 \
/dev/test/scratch2
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs device remove 3 /mnt/btrfs
Then we have the following kernel NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 649 Comm: btrfs Not tainted 5.14.0-rc3-custom+ #35
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:btrfs_rm_device+0x4de/0x6b0 [btrfs]
btrfs_ioctl+0x18bb/0x3190 [btrfs]
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
? do_user_addr_fault+0x201/0x6a0
? lock_release+0xd2/0x2d0
? __x64_sys_ioctl+0x83/0xb0
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
[CAUSE]
Commit a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return
btrfs_device directly") moves the "missing" device path check into
btrfs_rm_device().
But btrfs_rm_device() itself can have case where it only receives
@devid, with NULL as @device_path.
In that case, calling strcmp() on NULL will trigger the NULL pointer
dereference.
Before that commit, we handle the "missing" case inside
btrfs_find_device_by_devspec(), which will not check @device_path at all
if @devid is provided, thus no way to trigger the bug.
[FIX]
Before calling strcmp(), also make sure @device_path is not NULL.
Fixes: a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly")
CC: stable@vger.kernel.org # 5.4+
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We call split_zoned_em() on an extent_map on submitting a bio for it. Thus,
we can assume the extent_map is PINNED, not LOGGING, and in the modified
list. Add ASSERT()s to ensure the extent_maps after the split also has the
proper flags set and are in the modified list.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
alloc_offset is offset from the start of a block group and @offset is
actually an address in logical space. Thus, we need to consider
block_group->start when calculating them.
Fixes: 011b41bffa ("btrfs: zoned: advance allocation pointer after tree log node")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_relocate_chunk() can fail with -EAGAIN when e.g. send operations are
running. The message can fail btrfs/187 and it's unnecessary because we
anyway add it back to the reclaim list.
btrfs_reclaim_bgs_work()
`-> btrfs_relocate_chunk()
`-> btrfs_relocate_block_group()
`-> reloc_chunk_start()
`-> if (fs_info->send_in_progress)
`-> return -EAGAIN
CC: stable@vger.kernel.org # 5.13+
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Automatically reclaiming dirty zones might not always be desired for all
workloads, especially as there are currently still some rough edges with
the relocation code on zoned filesystems.
Allow disabling zone auto reclaim on a per filesystem basis by writing 0
as the threshold value.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comment at log_conflicting_inodes() mentions that we check the inode's
logged_trans field instead of using btrfs_inode_in_log() because the field
last_log_commit is not updated when we log that an inode exists and the
inode has the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) set. The part
about the full sync flag is not true anymore since commit 9acc8103ab
("btrfs: fix unpersisted i_size on fsync after expanding truncate"), so
update the comment to not mention that part anymore.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we are checking if the inode's logged_trans is 0 to detect the
possibility of the inode having been evicted and reloaded, the test for
the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) is no longer needed at
tree-log.c:inode_logged(). Its purpose was to detect the possibility
of a previous eviction as well, since when an inode is loaded the full
sync flag is always set on it (and only cleared after the inode is
logged).
So just remove the check and update the comment. The check for the inode's
logged_trans being 0 was added recently by the patch with the subject
"btrfs: eliminate some false positives when checking if inode was logged".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the very end of btrfs_rename_exchange(), in case an error happened, we
are checking if 'new_inode' is NULL, but that is not needed since during a
rename exchange, unlike regular renames, 'new_inode' can never be NULL,
and if it were, we would have a crashed much earlier when we dereference it
multiple times.
So remove the check because it is not necessary and because it is causing
static checkers to emit a warning. I probably introduced the check by
copy-pasting similar code from btrfs_rename(), where 'new_inode' can be
NULL, in commit 86e8aa0e77 ("Btrfs: unpin logs if rename exchange
operation fails").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate backref_ctx, allocate backref_ctx
on stack. The size is reasonably small.
sizeof(backref_ctx) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_defrag_range_args,
allocate btrfs_ioctl_defrag_range_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_defrag_range_args) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_quota_rescan_args,
allocate btrfs_ioctl_quota_rescan_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_quota_rescan_args) = 64
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's a common practice to start a search using offset (u64)-1, which is
the u64 maximum value, meaning that we want the search_slot function to
be set in the last item with the same objectid and type.
Once we are in this position, it's a matter to start a search backwards
by calling btrfs_previous_item, which will check if we'll need to go to
a previous leaf and other necessary checks, only to be sure that we are
in last offset of the same object and type.
The new btrfs_search_backwards function does the all these steps when
necessary, and can be used to avoid code duplication.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As fsverity support depends on a config option, print that at module
load time like we do for similar features.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a file, or fail to clean up already created
metadata after a failure, we could leak the verity items that we already
committed.
To address this issue, we use the orphan mechanism. When we start
enabling verity on a file, we also add an orphan item for that inode.
When we are finished, we delete the orphan. However, if we are
interrupted midway, the orphan will be present at mount and we can
cleanup the half-formed verity state.
There is a possible race with a normal unlink operation: if unlink and
verity run on the same file in parallel, it is possible for verity to
succeed and delete the still legitimate orphan added by unlink. Then, if
we are interrupted and mount in that state, we will never clean up the
inode properly. This is also possible for a file created with O_TMPFILE.
Check nlink==0 before deleting to avoid this race.
A final thing to note is that this is a resurrection of using orphans to
signal an operation besides "delete this inode". The old case was to
signal the need to do a truncate. That case still technically applies
for mounting very old file systems, so we need to take some care to not
clobber it. To that end, we just have to be careful that verity orphan
cleanup is a no-op for non-verity files.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, inode flags are fully backwards incompatible in btrfs. If we
introduce a new inode flag, then tree-checker will detect it and fail.
This can even cause us to fail to mount entirely. To make it possible to
introduce new flags which can be read-only compatible, like VERITY, we
add new ro flags to btrfs without treating them quite so harshly in
tree-checker. A read-only file system can survive an unexpected flag,
and can be mounted.
As for the implementation, it unfortunately gets a little complicated.
The on-disk representation of the inode, btrfs_inode_item, has an __le64
for flags but the in-memory representation, btrfs_inode, uses a u32.
David Sterba had the nice idea that we could reclaim those wasted 32 bits
on disk and use them for the new ro_compat flags.
It turns out that the tree-checker code which checks for unknown flags
is broken, and ignores the upper 32 bits we are hoping to use. The issue
is that the flags use the literal 1 rather than 1ULL, so the flags are
signed ints, and one of them is specifically (1 << 31). As a result, the
mask which ORs the flags is a negative integer on machines where int is
32 bit twos complement. When tree-checker evaluates the expression:
btrfs_inode_flags(leaf, iitem) & ~BTRFS_INODE_FLAG_MASK)
The mask is something like 0x80000abc, which gets promoted to u64 with
sign extension to 0xffffffff80000abc. Negating that 64 bit mask leaves
all the upper bits zeroed, and we can't detect unexpected flags.
This suggests that we can't use those bits after all. Luckily, we have
good reason to believe that they are zero anyway. Inode flags are
metadata, which is always checksummed, so any bit flips that would
introduce 1s would cause a checksum failure anyway (excluding the
improbable case of the checksum getting corrupted exactly badly).
Further, unless the 1 << 31 flag is used, the cast to u64 of the 32 bit
inode flag should preserve its value and not add leading zeroes
(at least for twos complement). The only place that flag
(BTRFS_INODE_ROOT_ITEM_INIT) is used is in a special inode embedded in
the root item, and indeed for that inode we see 0xffffffff80000000 as
the flags on disk. However, that inode is never seen by tree checker,
nor is it used in a context where verity might be meaningful.
Theoretically, a future ro flag might cause trouble on that inode, so we
should proactively clean up that mess before it does.
With the introduction of the new ro flags, keep two separate unsigned
masks and check them against the appropriate u32. Since we no longer run
afoul of sign extension, this also stops writing out 0xffffffff80000000
in root_item inodes going forward.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_check_raid_min_devices() returns error code from the enum
btrfs_err_code and it starts from 1. So there is no need to check if ret
is > 0. So drop this check and also drop the local variable ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_run_delalloc_range() failed, we will error out.
But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.
Commit 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.
Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.
By all means the comment is incorrect, just remove the comment along
with the dead check.
Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The data on raid0 and raid10 are supposed to be spread over multiple
devices, so the minimum constraints are set to 2 and 4 respectively.
This is an artificial limit and there's some interest to remove it.
Change this to allow raid0 on one device and raid10 on two devices. This
works as expected eg. when converting or removing devices.
The only difference is when raid0 on two devices gets one device
removed. Unpatched would silently create a single profile, while newly
it would be raid0.
The motivation is to allow to preserve the profile type as long as it
possible for some intermediate state (device removal, conversion), or
when there are disks of different size, with raid0 the otherwise
unusable space of the last device will be used too. Similarly for
raid10, though the two largest devices would need to be the same.
Unpatched kernel will mount and use the degenerate profiles just fine
but won't allow any operation that would not satisfy the stricter device
number constraints, eg. not allowing to go from 3 to 2 devices for
raid10 or various profile conversions.
Example output:
# btrfs fi us -T .
Overall:
Device size: 10.00GiB
Device allocated: 1.01GiB
Device unallocated: 8.99GiB
Device missing: 0.00B
Used: 200.61MiB
Free (estimated): 9.79GiB (min: 9.79GiB)
Free (statfs, df): 9.79GiB
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 3.25MiB (used: 0.00B)
Multiple profiles: no
Data Metadata System
Id Path RAID0 single single Unallocated
-- ---------- --------- --------- -------- -----------
1 /dev/sda10 1.00GiB 8.00MiB 1.00MiB 8.99GiB
-- ---------- --------- --------- -------- -----------
Total 1.00GiB 8.00MiB 1.00MiB 8.99GiB
Used 200.25MiB 352.00KiB 16.00KiB
# btrfs dev us .
/dev/sda10, ID: 1
Device size: 10.00GiB
Device slack: 0.00B
Data,RAID0/1: 1.00GiB
Metadata,single: 8.00MiB
System,single: 1.00MiB
Unallocated: 8.99GiB
Note "Data,RAID0/1", with btrfs-progs 5.13+ the number of devices per
profile is printed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During renames we pin the logs of the roots a bit too early, before the
calls to btrfs_insert_inode_ref(). We can pin the logs after those calls,
since those will not change anything in a log tree.
In a scenario where we have multiple and diverse filesystem operations
running in parallel, those calls can take a significant amount of time,
due to lock contention on extent buffers, and delay log commits from other
tasks for longer than necessary.
So just pin logs after calls to btrfs_insert_inode_ref() and right before
the first operation that can update a log tree.
The following script that uses dbench was used for testing:
$ cat dbench-test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 16
umount $MNT
The tests were run on a machine with 12 cores, 64G of RAN, a NVMe device
and using a non-debug kernel config (Debian's default config).
The results compare a branch without this patch and without the previous
patch in the series, that has the subject:
"btrfs: eliminate some false positives when checking if inode was logged"
Versus the same branch with these two patches applied.
dbench with 8 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4391359 0.009 249.745
Close 3225882 0.001 3.243
Rename 185953 0.065 240.643
Unlink 886669 0.049 249.906
Deltree 112 2.455 217.433
Mkdir 56 0.002 0.004
Qpathinfo 3980281 0.004 3.109
Qfileinfo 697579 0.001 0.187
Qfsinfo 729780 0.002 2.424
Sfileinfo 357764 0.004 1.415
Find 1538861 0.016 4.863
WriteX 2189666 0.010 3.327
ReadX 6883443 0.002 0.729
LockX 14298 0.002 0.073
UnlockX 14298 0.001 0.042
Flush 307777 2.447 303.663
Throughput 1149.6 MB/sec 8 clients 8 procs max_latency=303.666 ms
dbench with 8 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4269920 0.009 213.532
Close 3136653 0.001 0.690
Rename 180805 0.082 213.858
Unlink 862189 0.050 172.893
Deltree 112 2.998 218.328
Mkdir 56 0.002 0.003
Qpathinfo 3870158 0.004 5.072
Qfileinfo 678375 0.001 0.194
Qfsinfo 709604 0.002 0.485
Sfileinfo 347850 0.004 1.304
Find 1496310 0.017 5.504
WriteX 2129613 0.010 2.882
ReadX 6693066 0.002 1.517
LockX 13902 0.002 0.075
UnlockX 13902 0.001 0.055
Flush 299276 2.511 220.189
Throughput 1187.33 MB/sec 8 clients 8 procs max_latency=220.194 ms
+3.2% throughput, -31.8% max latency
dbench with 16 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5978334 0.028 156.507
Close 4391598 0.001 1.345
Rename 253136 0.241 155.057
Unlink 1207220 0.182 257.344
Deltree 160 6.123 36.277
Mkdir 80 0.003 0.005
Qpathinfo 5418817 0.012 6.867
Qfileinfo 949929 0.001 0.941
Qfsinfo 993560 0.002 1.386
Sfileinfo 486904 0.004 2.829
Find 2095088 0.059 8.164
WriteX 2982319 0.017 9.029
ReadX 9371484 0.002 4.052
LockX 19470 0.002 0.461
UnlockX 19470 0.001 0.990
Flush 418936 2.740 347.902
Throughput 1495.31 MB/sec 16 clients 16 procs max_latency=347.909 ms
dbench with 16 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5711833 0.029 131.240
Close 4195897 0.001 1.732
Rename 241849 0.204 147.831
Unlink 1153341 0.184 231.322
Deltree 160 6.086 30.198
Mkdir 80 0.003 0.021
Qpathinfo 5177011 0.012 7.150
Qfileinfo 907768 0.001 0.793
Qfsinfo 949205 0.002 1.431
Sfileinfo 465317 0.004 2.454
Find 2001541 0.058 7.819
WriteX 2850661 0.017 9.110
ReadX 8952289 0.002 3.991
LockX 18596 0.002 0.655
UnlockX 18596 0.001 0.179
Flush 400342 2.879 293.607
Throughput 1565.73 MB/sec 16 clients 16 procs max_latency=293.611 ms
+4.6% throughput, -16.9% max latency
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When checking if an inode was previously logged in the current transaction
through the helper inode_logged(), we can return some false positives that
can be easily eliminated. These correspond to the cases where an inode has
a ->logged_trans value that is not zero and its value is smaller then the
ID of the current transaction. This means we know exactly that the inode
was never logged before in the current transaction, so we can return false
and avoid the callers to do extra work:
1) Having btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log()
unnecessarily join a log transaction and do deletion searches in a log
tree that will not find anything. This just adds unnecessary contention
on extent buffer locks;
2) Having btrfs_log_new_name() unnecessarily log an inode when it is not
needed. If the inode was not logged before, we don't need to log it in
LOG_INODE_EXISTS mode.
So just make sure that any false positive only happens when ->logged_trans
has a value of 0.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When on SINGLE block group, btrfs_get_io_geometry() will return "the
size of the block group - the offset of the logical address within the
block group" as geom.len. Since we allow up to 8 GiB zone size on zoned
filesystem, we can have up to 8 GiB block group, so can have up to 8 GiB
geom.len as well. With this setup, we easily hit the "ASSERT(geom.len <=
INT_MAX);".
The ASSERT looks like to guard btrfs_bio_clone_partial() and bio_trim()
which both take "int" (now u64 due to the previous patch). So to be
precise the ASSERT should check if clone_len <= UINT_MAX. But actually,
clone_len is already capped by bio.bi_iter.bi_size which is unsigned
int. So the ASSERT is not necessary.
Drop the ASSERT and properly compare submit_len and geom.len in u64.
Then, let the implicit casting to convert it to u64.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The offset and can never be negative use unsigned int instead of int
type for them.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all users of sync_inode() have been deleted, remove
sync_inode().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to remove sync_inode, so migrate to filemap_fdatawrite_wbc
instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
sync_inode() has some holes that can cause problems if we're under heavy
ENOSPC pressure. If there's writeback running on a separate thread
sync_inode() will skip writing the inode altogether. What we really
want is to make sure writeback has been started on all the pages to make
sure we can see the ordered extents and wait on them if appropriate.
Switch to this new helper which will allow us to accomplish this and
avoid ENOSPC'ing early.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I've been debugging an early ENOSPC problem in production and finally
root caused it to this problem. When we switched to the per-inode in
38d715f494 ("btrfs: use btrfs_start_delalloc_roots in
shrink_delalloc") I pulled out the async extent handling, because we
were doing the correct thing by calling filemap_flush() if we had async
extents set. This would properly wait on any async extents by locking
the page in the second flush, thus making sure our ordered extents were
properly set up.
However when I switched us back to page based flushing, I used
sync_inode(), which allows us to pass in our own wbc. The problem here
is that sync_inode() is smarter than the filemap_* helpers, it tries to
avoid calling writepages at all. This means that our second call could
skip calling do_writepages altogether, and thus not wait on the pagelock
for the async helpers. This means we could come back before any ordered
extents were created and then simply continue on in our flushing
mechanisms and ENOSPC out when we have plenty of space to use.
Fix this by putting back the async pages logic in shrink_delalloc. This
allows us to bulk write out everything that we need to, and then we can
wait in one place for the async helpers to catch up, and then wait on
any ordered extents that are created.
Fixes: e076ab2a2c ("btrfs: shrink delalloc pages instead of full inodes")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been hitting some early ENOSPC issues in production with more
recent kernels, and I tracked it down to us simply not flushing delalloc
as aggressively as we should be. With tracing I was seeing us failing
all tickets with all of the block rsvs at or around 0, with very little
pinned space, but still around 120MiB of outstanding bytes_may_used.
Upon further investigation I saw that we were flushing around 14 pages
per shrink call for delalloc, despite having around 2GiB of delalloc
outstanding.
Consider the example of a 8 way machine, all CPUs trying to create a
file in parallel, which at the time of this commit requires 5 items to
do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim
size waiting on reservations. Now assume we have 128MiB of delalloc
outstanding. With our current math we would set items to 20, and then
set to_reclaim to 20 * 256k, or 5MiB.
Assuming that we went through this loop all 3 times, for both
FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop
twice, we'd only flush 60MiB of the 128MiB delalloc space. This could
leave a fair bit of delalloc reservations still hanging around by the
time we go to ENOSPC out all the remaining tickets.
Fix this two ways. First, change the calculations to be a fraction of
the total delalloc bytes on the system. Prior to this change we were
calculating based on dirty inodes so our math made more sense, now it's
just completely unrelated to what we're actually doing.
Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've
gone through the flush states at least once. This will empty the system
of all delalloc so we're sure to be truly out of space when we start
failing tickets.
I'm tagging stable 5.10 and forward, because this is where we started
using the page stuff heavily again. This affects earlier kernel
versions as well, but would be a pain to backport to them as the
flushing mechanisms aren't the same.
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging early enospc problems it was useful to have a tracepoint
where we failed all tickets so I could check the state of the enospc
counters at failure time to validate my fixes. This adds the tracpoint
so you can easily get that information.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use the async_delalloc_pages mechanism to make sure that we've
completed our async work before trying to continue our delalloc
flushing. The reason for this is we need to see any ordered extents
that were created by our delalloc flushing. However we're waking up
before we do the submit work, which is before we create the ordered
extents. This is a pretty wide race window where we could potentially
think there are no ordered extents and thus exit shrink_delalloc
prematurely. Fix this by waking us up after we've done the work to
create ordered extents.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/160 in a loop for subpage with experimental
compression support, it has a high chance to crash (~20%):
BTRFS critical (device dm-7): panic in __btrfs_add_ordered_extent:238: inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:238!
Internal error: Oops - BUG: 0 [#1] SMP
pc : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
lr : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
Call trace:
__btrfs_add_ordered_extent+0x550/0x670 [btrfs]
btrfs_add_ordered_extent+0x2c/0x50 [btrfs]
run_delalloc_nocow+0x81c/0x8fc [btrfs]
btrfs_run_delalloc_range+0xa4/0x390 [btrfs]
writepage_delalloc+0xc0/0x1ac [btrfs]
__extent_writepage+0xf4/0x370 [btrfs]
extent_write_cache_pages+0x288/0x4f4 [btrfs]
extent_writepages+0x58/0xe0 [btrfs]
btrfs_writepages+0x1c/0x30 [btrfs]
do_writepages+0x60/0x110
__filemap_fdatawrite_range+0x108/0x170
filemap_fdatawrite_range+0x20/0x30
btrfs_fdatawrite_range+0x34/0x4dc [btrfs]
__btrfs_write_out_cache+0x34c/0x480 [btrfs]
btrfs_write_out_cache+0x144/0x220 [btrfs]
btrfs_start_dirty_block_groups+0x3ac/0x6b0 [btrfs]
btrfs_commit_transaction+0xd0/0xbb4 [btrfs]
btrfs_sync_fs+0x64/0x1cc [btrfs]
sync_fs_one_sb+0x3c/0x50
iterate_supers+0xcc/0x1d4
ksys_sync+0x6c/0xd0
__arm64_sys_sync+0x1c/0x30
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x4c/0xd4
do_el0_svc+0x30/0x9c
el0_svc+0x2c/0x54
el0_sync_handler+0x1a8/0x1b0
el0_sync+0x198/0x1c0
---[ end trace 336f67369ae6e0af ]---
[CAUSE]
For subpage case, we can have multiple sectors inside a page, this makes
it possible for __extent_writepage() to have part of its page submitted
before returning.
In btrfs/160, we are using dm-dust to emulate write error, this means
for certain pages, we could have everything running fine, but at the end
of __extent_writepage(), one of the submitted bios fails due to dm-dust.
Then the page is marked Error, and we change @ret from 0 to -EIO.
This makes the caller extent_write_cache_pages() to error out, without
submitting the remaining pages.
Furthermore, since we're erroring out for free space cache, it doesn't
really care about the error and will update the inode and retry the
writeback.
Then we re-run the delalloc range, and will try to insert the same
delalloc range while previous delalloc range is still hanging there,
triggering the above error.
[FIX]
The proper fix is to handle errors from __extent_writepage() properly,
by ending the remaining ordered extent.
But that fix needs the following changes:
- Know at exactly which sector the error happened
Currently __extent_writepage_io() works for the full page, can't
return at which sector we hit the error.
- Grab the ordered extent covering the failed sector
As a hotfix for subpage case, here we unify the error paths in
__extent_writepage().
In fact, the "if (PageError(page))" branch never get executed if @ret is
still 0 for non-subpage cases.
As for non-subpage case, we never submit current page in
__extent_writepage(), but only add current page into bio.
The bio can only get submitted in next page.
Thus we never get PageError() set due to IO failure, thus when we hit
the branch, @ret is never 0.
By simply removing that @ret assignment, we let subpage case ignore the
IO failure, thus only error out for fatal errors just like regular
sectorsize.
So that IO error won't be treated as fatal error not trigger the hanging
OE problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since now we support data and metadata read-write for subpage, remove
the RO requirement for subpage mount.
There are some extra limitations though:
- For now, subpage RW mount is still considered experimental
Thus that mount warning will still be there.
- No compression support
There are still quite some PAGE_SIZE hard coded and quite some call
sites use extent_clear_unlock_delalloc() to unlock locked_page.
This will screw up subpage helpers.
Now for subpage RW mount, no matter what mount option or inode attr is
set, all writes will not be compressed. Although reading compressed
data has no problem.
- No defrag for subpage case
The defrag support for subpage case will come in later patches, which
will also rework the defrag workflow.
- No inline extent will be created
This is mostly due to the fact that filemap_fdatawrite_range() will
trigger more write than the range specified.
In fallocate calls, this behavior can make us to writeback which can
be inlined, before we enlarge the i_size.
This is a very special corner case, and even current btrfs check won't
report error on such inline extent + regular extent.
But considering how much effort has been put to prevent such inline +
regular, I'd prefer to cut off inline extent completely until we have
a good solution.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When using the following script, btrfs will report data corruption after
one data balance with subpage support:
mkfs.btrfs -f -s 4k $dev
mount $dev -o nospace_cache $mnt
$fsstress -w -n 8 -s 1620948986 -d $mnt/ -v > /tmp/fsstress
sync
btrfs balance start -d $mnt
btrfs scrub start -B $mnt
Similar problem can be easily observed in btrfs/028 test case, there
will be tons of balance failure with -EIO.
[CAUSE]
Above fsstress will result the following data extents layout in extent
tree:
item 10 key (13631488 EXTENT_ITEM 98304) itemoff 15889 itemsize 82
refs 2 gen 7 flags DATA
extent data backref root FS_TREE objectid 259 offset 1339392 count 1
extent data backref root FS_TREE objectid 259 offset 647168 count 1
item 11 key (13631488 BLOCK_GROUP_ITEM 8388608) itemoff 15865 itemsize 24
block group used 102400 chunk_objectid 256 flags DATA
item 12 key (13733888 EXTENT_ITEM 4096) itemoff 15812 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 259 offset 729088 count 1
Then when creating the data reloc inode, the data reloc inode will look
like this:
0 32K 64K 96K 100K 104K
|<------ Extent A ----->| |<- Ext B ->|
Then when we first try to relocate extent A, we setup the data reloc
inode with i_size 96K, then read both page [0, 64K) and page [64K, 128K).
For page 64K, since the i_size is just 96K, we fill range [96K, 128K)
with 0 and set it uptodate.
Then when we come to extent B, we update i_size to 104K, then try to read
page [64K, 128K).
Then we find the page is already uptodate, so we skip the read.
But range [96K, 128K) is filled with 0, not the real data.
Then we writeback the data reloc inode to disk, with 0 filling range
[96K, 128K), corrupting the content of extent B.
The behavior is caused by the fact that we still do full page read for
subpage case.
The bug won't really happen for regular sectorsize, as one page only
contains one sector.
[FIX]
This patch will fix the problem by invalidating range [i_size, PAGE_END]
in prealloc_file_extent_cluster().
So that if above example happens, when we preallocate the file extent
for extent B, we will clear the uptodate bits for range [96K, 128K),
allowing later relocate_one_page() to re-read the needed range.
There is a special note for the invalidating part.
Since we're not calling real btrfs_invalidatepage(), but just clearing
the subpage and page uptodate bits, we can leave a page half dirty and
half out of date.
Reading such page can cause a deadlock, as we normally expect a dirty
page to be fully uptodate.
Thus here we flush and wait the data reloc inode before doing the hacked
invalidating. This won't cause extra overhead, as we're going to
writeback the data later anyway.
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When relocating partial preallocated data extents (part of the
preallocated extent is written) for subpage, it can cause the following
false alert and make the relocation to fail:
BTRFS info (device dm-3): balance: start -d
BTRFS info (device dm-3): relocating block group 13631488 flags data
BTRFS warning (device dm-3): csum failed root -9 ino 257 off 4096 csum 0x98757625 expected csum 0x00000000 mirror 1
BTRFS error (device dm-3): bdev /dev/mapper/arm_nvme-test errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS warning (device dm-3): csum failed root -9 ino 257 off 4096 csum 0x98757625 expected csum 0x00000000 mirror 1
BTRFS error (device dm-3): bdev /dev/mapper/arm_nvme-test errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
BTRFS info (device dm-3): balance: ended with status: -5
The minimal script to reproduce looks like this:
mkfs.btrfs -f -s 4k $dev
mount $dev -o nospace_cache $mnt
xfs_io -f -c "falloc 0 8k" $mnt/file
xfs_io -f -c "pwrite 0 4k" $mnt/file
btrfs balance start -d $mnt
[CAUSE]
Function btrfs_verify_data_csum() checks if the full range has
EXTENT_NODATASUM bit for data reloc inode, if *all* bytes of the range
have EXTENT_NODATASUM bit, then it skip the range.
This works pretty well for regular sectorsize, as in that case
btrfs_verify_data_csum() is called for each sector, thus no problem at
all.
But for subpage case, btrfs_verify_data_csum() is called on each bvec,
which can contain several sectors, and since it checks *all* bytes for
EXTENT_NODATASUM bit, if we have some range with csum, then we will
continue checking all the sectors.
For the preallocated sectors, it doesn't have any csum, thus obviously
the csum won't match and cause the false alert.
[FIX]
Move the EXTENT_NODATASUM check into the main loop, so that we can check
each sector for EXTENT_NODATASUM bit for subpage case.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a possible use-after-free bug when running generic/095.
BUG: Unable to handle kernel data access on write at 0x6b6b6b6b6b6b725b
Faulting instruction address: 0xc000000000283654
c000000000283078 do_raw_spin_unlock+0x88/0x230
c0000000012b1e14 _raw_spin_unlock_irqrestore+0x44/0x90
c000000000a918dc btrfs_subpage_clear_writeback+0xac/0xe0
c0000000009e0458 end_bio_extent_writepage+0x158/0x270
c000000000b6fd14 bio_endio+0x254/0x270
c0000000009fc0f0 btrfs_end_bio+0x1a0/0x200
c000000000b6fd14 bio_endio+0x254/0x270
c000000000b781fc blk_update_request+0x46c/0x670
c000000000b8b394 blk_mq_end_request+0x34/0x1d0
c000000000d82d1c lo_complete_rq+0x11c/0x140
c000000000b880a4 blk_complete_reqs+0x84/0xb0
c0000000012b2ca4 __do_softirq+0x334/0x680
c0000000001dd878 irq_exit+0x148/0x1d0
c000000000016f4c do_IRQ+0x20c/0x240
c000000000009240 hardware_interrupt_common_virt+0x1b0/0x1c0
[CAUSE]
There is very small race window like the following in generic/095.
Thread 1 | Thread 2
--------------------------------+------------------------------------
end_bio_extent_writepage() | btrfs_releasepage()
|- spin_lock_irqsave() | |
|- end_page_writeback() | |
| | |- if (PageWriteback() ||...)
| | |- clear_page_extent_mapped()
| | |- kfree(subpage);
|- spin_unlock_irqrestore().
The race can also happen between writeback and btrfs_invalidatepage(),
although that would be much harder as btrfs_invalidatepage() has much
more work to do before the clear_page_extent_mapped() call.
[FIX]
Here we "wait" for the subapge spinlock to be released before we detach
subpage structure.
So this patch will introduce a new function, wait_subpage_spinlock(), to
do the "wait" by acquiring the spinlock and release it.
Since the caller has ensured the page is not dirty nor writeback, and
page is already locked, the only way to hold the subpage spinlock is
from endio function.
Thus we only need to acquire the spinlock to wait for any existing
holder.
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running generic/095, there is a high chance to crash with subpage
data RW support:
assertion failed: PagePrivate(page) && page->private
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3403!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 1 PID: 3567 Comm: fio Tainted: 5.12.0-rc7-custom+ #17
Hardware name: Khadas VIM3 (DT)
Call trace:
assertfail.constprop.0+0x28/0x2c [btrfs]
btrfs_subpage_assert+0x80/0xa0 [btrfs]
btrfs_subpage_set_uptodate+0x34/0xec [btrfs]
btrfs_page_clamp_set_uptodate+0x74/0xa4 [btrfs]
btrfs_dirty_pages+0x160/0x270 [btrfs]
btrfs_buffered_write+0x444/0x630 [btrfs]
btrfs_direct_write+0x1cc/0x2d0 [btrfs]
btrfs_file_write_iter+0xc0/0x160 [btrfs]
new_sync_write+0xe8/0x180
vfs_write+0x1b4/0x210
ksys_pwrite64+0x7c/0xc0
__arm64_sys_pwrite64+0x24/0x30
el0_svc_common.constprop.0+0x70/0x140
do_el0_svc+0x28/0x90
el0_svc+0x2c/0x54
el0_sync_handler+0x1a8/0x1ac
el0_sync+0x170/0x180
Code: f0000160 913be042 913c4000 955444bc (d4210000)
---[ end trace 3fdd39f4cccedd68 ]---
[CAUSE]
Although prepare_pages() calls find_or_create_page(), which returns the
page locked, but in later prepare_uptodate_page() calls, we may call
btrfs_readpage() which will unlock the page before it returns.
This leaves a window where btrfs_releasepage() can sneak in and release
the page, clearing page->private and causing above ASSERT().
[FIX]
In prepare_uptodate_page(), we should not only check page->mapping, but
also PagePrivate() to ensure we are still holding the correct page which
has proper fs context setup.
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
RAID56 is not only unsafe due to its write-hole problem, but also has
tons of hardcoded PAGE_SIZE.
Disable it for subpage support for now.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current submit_extent_page() just checks if the current page range can
be fitted into current bio, and if not, submit then re-add.
But this behavior can't handle subpage case at all.
For subpage case, the problem is in the page size, 64K, which is also
the same size as stripe size.
This means, if we can't fit a full 64K into a bio, due to stripe limit,
then it won't fit into next bio without crossing stripe either.
The proper way to handle it is:
- Check how many bytes we can be put into current bio
- Put as many bytes as possible into current bio first
- Submit current bio
- Create a new bio
- Add the remaining bytes into the new bio
Refactor submit_extent_page() so that it does the above iteration.
The main loop inside submit_extent_page() will look like this:
cur = pg_offset;
while (cur < pg_offset + size) {
u32 offset = cur - pg_offset;
int added;
if (!bio_ctrl->bio) {
/* Allocate new bio if needed */
}
/* Add as many bytes into the bio */
added = btrfs_bio_add_page();
if (added < size - offset) {
/* The current bio is full, submit it */
}
cur += added;
}
Also, since we're doing new bio allocation deep inside the main loop,
extract that code into a new helper, alloc_new_bio().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running the following fsx command (extracted from generic/127) on
subpage filesystem, it can create inline extent with regular extents:
fsx -q -l 262144 -o 65536 -S 191110531 -N 9057 -R -W $mnt/file > /tmp/fsx
The offending extent would look like:
item 9 key (257 INODE_REF 256) itemoff 15703 itemsize 14
index 2 namelen 4 name: file
item 10 key (257 EXTENT_DATA 0) itemoff 14975 itemsize 728
generation 7 type 0 (inline)
inline extent data size 707 ram_bytes 707 compression 0 (none)
item 11 key (257 EXTENT_DATA 4096) itemoff 14922 itemsize 53
generation 7 type 2 (prealloc)
prealloc data disk byte 102346752 nr 4096
prealloc data offset 0 nr 4096
[CAUSE]
For subpage filesystem, the writeback is triggered in page units, which
means, even if we just want to writeback range [16K, 20K) for 64K page
system, we will still try to writeback any dirty sector of range [0, 64K).
This is never a problem if sectorsize == PAGE_SIZE, but for subpage,
this can cause unexpected problems.
For above test case, the last several operations from fsx are:
9055 trunc from 0x40000 to 0x2c3
9057 falloc from 0x164c to 0x19d2 (0x386 bytes)
In operation 9055, we dirtied sector [0, 4096), then in falloc, we call
btrfs_wait_ordered_range(inode, start=4096, len=4096), only expecting to
writeback any dirty data in [4096, 8192), but nothing else.
Unfortunately, in subpage case, above btrfs_wait_ordered_range() will
trigger writeback of the range [0, 64K), which includes the data at
[0, 4096).
And since at the call site, we haven't yet increased i_size, which is
still 707, this means cow_file_range() can insert an inline extent.
Resulting above inline + regular extent.
[WORKAROUND]
I don't really have any good short-term solution yet, as this means all
operations that would trigger writeback need to be reviewed for any
i_size change.
So here I choose to disable inline extent creation for subpage case as a
workaround. We have done tons of work just to avoid such extent, so I
don't to create an exception just for subpage.
This only affects inline extent creation, subpage has no problem reading
existing inline extents at all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running fsstress with subpage RW support, there are random
BUG_ON()s triggered with the following trace:
kernel BUG at fs/btrfs/file-item.c:667!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 1 PID: 3486 Comm: kworker/u13:2 5.11.0-rc4-custom+ #43
Hardware name: Radxa ROCK Pi 4B (DT)
Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
lr : btrfs_csum_one_bio+0x400/0x4e0 [btrfs]
Call trace:
btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
btrfs_submit_bio_start+0x20/0x30 [btrfs]
run_one_async_start+0x28/0x44 [btrfs]
btrfs_work_helper+0x128/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
[CAUSE]
Above BUG_ON() means there is some bio range which doesn't have ordered
extent, which indeed is worth a BUG_ON().
Unlike regular sectorsize == PAGE_SIZE case, in subpage we have extra
subpage dirty bitmap to record which range is dirty and should be
written back.
This means, if we submit bio for a subpage range, we do not only need to
clear page dirty, but also need to clear subpage dirty bits.
In __extent_writepage_io(), we will call btrfs_page_clear_dirty() for
any range we submit a bio.
But there is loophole, if we hit a range which is beyond i_size, we just
call btrfs_writepage_endio_finish_ordered() to finish the ordered io,
then break out, without clearing the subpage dirty.
This means, if we hit above branch, the subpage dirty bits are still
there, if other range of the page get dirtied and we need to writeback
that page again, we will submit bio for the old range, leaving a wild
bio range which doesn't have ordered extent.
[FIX]
Fix it by always calling btrfs_page_clear_dirty() in
__extent_writepage_io().
Also to avoid such problem from happening again, add a new assert,
btrfs_page_assert_not_dirty(), to make sure both page dirty and subpage
dirty bits are cleared before exiting __extent_writepage_io().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage case, one page of data reloc inode can contain several file
extents, like this:
|<--- File extent A --->| FE B | FE C |<--- File extent D -->|
|<--------- Page --------->|
We can no longer use PAGE_SIZE directly for various operations.
This patch will relocate_one_page() to handle subpage case by:
- Iterating through all extents of a cluster when marking pages
When marking pages dirty and delalloc, we need to check the cluster
extent boundary.
Now we introduce a loop to go extent by extent of a page, until we
either finished the last extent, or reach the page end.
By this, regular sectorsize == PAGE_SIZE can still work as usual, since
we will do that loop only once.
- Iteration start from max(page_start, extent_start)
Since we can have the following case:
| FE B | FE C |<--- File extent D -->|
|<--------- Page --------->|
Thus we can't always start from page_start, but do a
max(page_start, extent_start)
- Iteration end when the cluster is exhausted
Similar to previous case, the last file extent can end before the page
end:
|<--- File extent A --->| FE B | FE C |
|<--------- Page --------->|
In this case, we need to manually exit the loop after we have finished
the last extent of the cluster.
- Reserve metadata space for each extent range
Since now we can hit multiple ranges in one page, we should reserve
metadata for each range, not simply PAGE_SIZE.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function relocate_file_extent_cluster(), we have a big loop for
marking all involved page delalloc.
That part is long enough to be contained in one function, so this patch
will move that code chunk into a new function, relocate_one_page().
This also provides enough space for later subpage work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the initial subpage support, although we won't support compressed
write, we still need to support compressed read.
But for lzo_decompress_bio() it has several problems:
- The abuse of PAGE_SIZE for boundary detection
For subpage case, we should follow sectorsize to detect the padding
zeros.
Using PAGE_SIZE will cause subpage compress read to skip certain
bytes, and causing read error.
- Too many helper variables
There are half a dozen helper variables, which is only making things
harder to read
This patch will rework lzo_decompress_bio() to make it work for subpage:
- Use sectorsize to do boundary check, while still use PAGE_SIZE for
page switching
This allows us to have the same on-disk format for 4K sectorsize fs,
while take advantage of larger page size.
- Use two main cursors
Only @cur_in and @cur_out is utilized as the main cursor.
The helper variables will only be declared inside the loop, and only 2
helper variables needed.
- Introduce a helper function to copy compressed segment payload
Introduce a new helper, copy_compressed_segment(), to copy a
compressed segment to workspace buffer.
This function will handle the page switching.
Now the net result is, with all the excessive comments and new helper
function, the refactored code is still smaller, and easier to read.
For other decompression code, they have no special padding rule, thus no
need to bother for initial subpage support, but will be refactored to
the same style later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several bugs inside the function btrfs_decompress_buf2page()
- @start_byte doesn't take bvec.bv_offset into consideration
Thus it can't handle case where the target range is not page aligned.
- Too many helper variables
There are tons of helper variables, @buf_offset, @current_buf_start,
@start_byte, @prev_start_byte, @working_bytes, @bytes.
This hurts anyone who wants to read the function.
- No obvious main cursor for the iteartion
A new problem caused by previous problem.
- Comments for parameter list makes no sense
Like @buf_start is the offset to @buf, or offset inside the full
decompressed extent? (Spoiler alert, the later case)
And @total_out acts more like @buf_start + @size_of_buf.
The worst is @disk_start.
The real meaning of it is the file offset of the full decompressed
extent.
This patch will rework the whole function by:
- Add a proper comment with ASCII art to explain the parameter list
- Rework parameter list
The old @buf_start is renamed to @decompressed, to show how many bytes
are already decompressed inside the full decompressed extent.
The old @total_out is replaced by @buf_len, which is the decompressed
data size.
For old @disk_start and @bio, just pass @compressed_bio in.
- Use single main cursor
The main cursor will be @cur_file_offset, to show what's the current
file offset.
Other helper variables will be declared inside the main loop, and only
minimal amount of helper variables:
* offset_inside_decompressed_buf: The only real helper
* copy_start_file_offset: File offset we start memcpy
* bvec_file_offset: File offset of current bvec
Even with all these extensive comments, the final function is still
smaller than the original function, which is definitely a win.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When subpage compressed read write support is enabled, btrfs/038 always
fails with EIO.
A simplified script can easily trigger the problem:
mkfs.btrfs -f -s 4k $dev
mount $dev $mnt -o compress=lzo
xfs_io -f -c "truncate 118811" $mnt/foo
xfs_io -c "pwrite -S 0x0d -b 39987 92267 39987" $mnt/foo > /dev/null
sync
btrfs subvolume snapshot -r $mnt $mnt/mysnap1
xfs_io -c "pwrite -S 0x3e -b 80000 200000 80000" $mnt/foo > /dev/null
sync
xfs_io -c "pwrite -S 0xdc -b 10000 250000 10000" $mnt/foo > /dev/null
xfs_io -c "pwrite -S 0xff -b 10000 300000 10000" $mnt/foo > /dev/null
sync
btrfs subvolume snapshot -r $mnt $mnt/mysnap2
cat $mnt/mysnap2/foo
# Above cat will fail due to EIO
[CAUSE]
The problem is in btrfs_submit_compressed_read().
When it tries to grab the extent map of the read range, it uses the
following call:
em = lookup_extent_mapping(em_tree,
page_offset(bio_first_page_all(bio)),
fs_info->sectorsize);
The problem is in the page_offset(bio_first_page_all(bio)) part.
The offending inode has the following file extent layout
item 10 key (257 EXTENT_DATA 131072) itemoff 15639 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13680640 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
item 11 key (257 EXTENT_DATA 135168) itemoff 15586 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 0 nr 0
item 12 key (257 EXTENT_DATA 196608) itemoff 15533 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13676544 nr 4096
extent data offset 0 nr 53248 ram 86016
extent compression 2 (lzo)
And the bio passed in has the following parameters:
page_offset(bio_first_page_all(bio)) = 131072
bio_first_bvec_all(bio)->bv_offset = 65536
If we use page_offset(bio_first_page_all(bio) without adding bv_offset,
we will get an extent map for file offset 131072, not 196608.
This means we read uncompressed data from disk, and later decompression
will definitely fail.
[FIX]
Take bv_offset into consideration when trying to grab an extent map.
And add an ASSERT() to ensure we're really getting a compressed extent.
Thankfully this won't affect anything but subpage, thus we only need to
ensure this patch get merged before we enabled basic subpage support.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For current subpage support, we only support 64K page size with 4K
sector size.
This makes compressed readahead less effective, as maximum compressed
extent size is only 128K, 2x the page size.
On the other hand, the function add_ra_bio_pages() is still assuming
sectorsize == PAGE_SIZE, and code change may affect 4K page size
systems.
So for now, let's disable subpage compressed readahead for now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When testing experimental subpage compressed write support, it hits a
NULL pointer dereference inside read path:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
pc : __pi_memcmp+0x28/0x1ec
lr : check_data_csum+0xd0/0x274 [btrfs]
Call trace:
__pi_memcmp+0x28/0x1ec
btrfs_verify_data_csum+0xf4/0x244 [btrfs]
end_bio_extent_readpage+0x1d0/0x6b0 [btrfs]
bio_endio+0x15c/0x1dc
end_workqueue_fn+0x44/0x64 [btrfs]
btrfs_work_helper+0x74/0x250 [btrfs]
process_one_work+0x1d4/0x47c
worker_thread+0x180/0x400
kthread+0x11c/0x120
ret_from_fork+0x10/0x30
Code: 54000261 d100044c d343fd8c f8408403 (f8408424)
---[ end trace 9e2c59f33ea40866 ]---
[CAUSE]
When reading two compressed extents inside the same page, like the
following layout, we trigger above crash:
0 32K 64K
|-------|\\\\\\\|
| \- Compressed extent (A)
\--------- Compressed extent (B)
For compressed read, we don't need to populate its io_bio->csum, as we
rely on compressed_bio->csum to verify the compressed data, and then
copy the decompressed to inode pages.
Normally btrfs_verify_data_csum() skip such page by checking and
clearing its PageChecked flag
But since that flag is still for the full page, when endio for inode
page range [0, 32K) gets executed, it clears PageChecked flag for the
full page.
Then when endio for inode page range [32K, 64K) gets executed, since the
page no longer has PageChecked flag, it just continues checking, even
though io_bio->csum is NULL.
[FIX]
Thankfully there are only two users of PageChecked bit:
- Cow fixup
Since subpage has its own way to trace page dirty (dirty_bitmap) and
ordered bit (ordered_bitmap), it should never trigger cow fixup.
- Compressed read
We can distinguish such read by just checking io_bio->csum.
So just check io_bio->csum before doing the verification to avoid such
NULL pointer dereference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds
Namjae Jeon
Hyunchul Lee
Per Forlin
Christian Brauner
Pavel Begunkov
Nadav Amit
Luigi Rizzo
Christoph Hellwig
Vasily Averin
Yutian Yang
Hugh Dickins
John Hubbard
Shakeel Butt
Johannes Weiner
Jan Kara
Gang He
Tuo Li
Dan Carpenter
David Hildenbrand
Xiaoguang Wang
Jens Axboe
Colin Ian King
Jeff Layton
Xiubo Li
Kari Argillander
Theodore Ts'o
Alexander Aring
Jaegeuk Kim
Ming Lei
Konstantin Komarov
Miklos Szeredi
Zhang Yi
Guoqing Jiang
Wang Jianchao
Trond Myklebust
Chao Yu
Fengnan Chang
Thomas Gleixner
Olga Kornievskaia
Ye Bin
Namjae Jeon
Jiapeng Chong
Gustavo A. R. Silva
Nathan Chancellor
Hao Xu
David Howells
Johannes Berg
J. Bruce Fields
Darrick J. Wong
Ronnie Sahlberg
Steve French
Shyam Prasad N
Ding Hui
Len Baker
Gao Xiang
Qu Wenruo
Sishuai Gong
Dave Chinner
Lukas Bulwahn
Dmitry Kadashev
wangyangbo
Daeho Jeong
aalexandrovich
Desmond Cheong Zhi Xi
Stian Skjelstad
Naohiro Aota
Josef Bacik
Marcos Paulo de Souza
Filipe Manana
Anand Jain
Johannes Thumshirn
Goldwyn Rodrigues
David Sterba
Boris Burkov
Chaitanya Kulkarni