Since loongson3_smp_ops is not used in LoongArch anymore, let's remove
it for cleanup.
Fixes: f2ac457a61 ("LoongArch: Add CPU definition headers")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We don't emulate reserved instructions and just send a signal to the
current process now. So we don't need to call compute_return_era() to
add 4 (point to the next instruction) to csr_era in pt_regs. RA/ERA's
backup/restore is cleaned up as well.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Align the address of kernel_entry to 4KB, to avoid early tlb miss
exception in case the entry code crosses page boundary.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Mat Martineau says:
====================
mptcp: Properly clean up unaccepted subflows
Patch 1 factors out part of the mptcp_close() function for use by a caller
that already owns the socket lock. This is a prerequisite for patch 2.
Patch 2 is the fix that fully cleans up the unaccepted subflow sockets.
====================
Link: https://lore.kernel.org/r/20220927193158.195729-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out __mptcp_close() from mptcp_close(). The caller of
__mptcp_close() should hold the socket lock, and cancel mptcp work when
__mptcp_close() returns true.
This function will be used in the next commit.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: xsk: ZC changes
Maciej Fijalkowski says:
This set consists of two fixes to issues that were either pointed out on
indirectly (John was reviewing AF_XDP selftests that were testing ice's
ZC support) mailing list or were directly reported by customers.
First patch allows user space to see done descriptor in CQ even after a
single frame being transmitted and second patch removes the need for
having HW rings sized to power of 2 number of descriptors when used
against AF_XDP.
I also forgot to mention that due to the current Tx cleaning algorithm,
4k HW ring was broken and these two patches bring it back to life, so we
kill two birds with one stone.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
====================
Link: https://lore.kernel.org/r/20220927164112.4011983-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the following set of commands fails:
$ ip link add br0 type bridge # vlan_filtering 0
$ ip link set swp0 master br0
$ bridge vlan
port vlan-id
swp0 1 PVID Egress Untagged
$ bridge vlan add dev swp0 vid 10
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
Dumping ocelot->vlans, one can see that the 2 egress-untagged VLANs on swp0 are
vid 1 (the bridge PVID) and vid 4094, a PVID used privately by the driver for
VLAN-unaware bridging. So this is why bridge vid 10 is refused, despite
'bridge vlan' showing a single egress untagged VLAN.
As mentioned in the comment added, having this private VLAN does not impose
restrictions to the hardware configuration, yet it is a bookkeeping problem.
There are 2 possible solutions.
One is to make the functions that operate on VLAN-unaware pvids:
- ocelot_add_vlan_unaware_pvid()
- ocelot_del_vlan_unaware_pvid()
- ocelot_port_setup_dsa_8021q_cpu()
- ocelot_port_teardown_dsa_8021q_cpu()
call something different than ocelot_vlan_member_(add|del)(), the latter being
the real problem, because it allocates a struct ocelot_bridge_vlan *vlan which
it adds to ocelot->vlans. We don't really *need* the private VLANs in
ocelot->vlans, it's just that we have the extra convenience of having the
vlan->portmask cached in software (whereas without these structures, we'd have
to create a raw ocelot_vlant_rmw_mask() procedure which reads back the current
port mask from hardware).
The other solution is to filter out the private VLANs from
ocelot_port_num_untagged_vlans(), since they aren't what callers care about.
We only need to do this to the mentioned function and not to
ocelot_port_num_tagged_vlans(), because private VLANs are never egress-tagged.
Nothing else seems to be broken in either solution, but the first one requires
more rework which will conflict with the net-next change 36a0bf4435 ("net:
mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity"),
and I'd like to avoid that. So go with the other one.
Fixes: 54c3198460 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220927122042.1100231-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is build warning when CONFIG_OF is not selected.
>> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match'
>> defined but not used [-Wunused-const-variable=]
324 | static const struct of_device_id imx93_clk_of_match[] = {
| ^~~~~~~~~~~~~~~~~~
The driver only support DT table, no sense to use of_match_ptr.
Fixes: 24defbe194 ("clk: imx: add i.MX93 clk")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After commit 31fd9b79dc ("ARM: dts: BCM5301X: update CRU block
description") a warning from clk-iproc-pll.c was generated due to a
duplicate PLL name as well as the console stopped working. Upon closer
inspection it became clear that iproc_pll_clk_setup() used the Device
Tree node unit name as an unique identifier as well as a parent name to
parent all clocks under the PLL.
BCM5301X was the first platform on which that got noticed because of the
DT node unit name renaming but the same assumptions hold true for any
user of the iproc_pll_clk_setup() function.
The first 'clock-output-names' property is always guaranteed to be
unique as well as providing the actual desired PLL clock name, so we
utilize that to register the PLL and as a parent name of all children
clock.
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stefan reports that there are issues with the level triggered
notification. Since we're late in the cycle, and it was introduced for
the 6.0 release, just disable it at prep time and we can bring this
back when Samba is happy with it.
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 4167ac8a65 ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
configuration to support DFS") divider M0 was forced to be 1 in order to
support DFS. However, that left N as it is, at high value of 36. On
boards without devfreq enabled (all of them in kernel 6.0), this
effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
maximum supported frequency.
In order to fix this, let's set N to 18 (register value 17). That way
default frequency of 432 MHz is preserved.
Fixes: 4167ac8a65 ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220928200122.3963509-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for
Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only
for Gen11+. Otherwise on Gen < 5 accessing these files results in the
following oops:
<1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8
<1> [88.829438] #PF: supervisor read access in kernel mode
<1> [88.829447] #PF: error_code(0x0000) - not-present page
This patch is a backport of the drm-tip commit 0d2d201095
("drm/i915: Perf_limit_reasons are only available for Gen11+") to
drm-intel-fixes. The backport is not identical to the original, it only
includes the sysfs portions of if. The debugfs portion is not available
in drm-intel-fixes so has not been backported.
Bspec: 20008
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863
Fixes: fa68bff7cf ("drm/i915/gt: Add sysfs throttle frequency interfaces")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919162401.2077713-1-ashutosh.dixit@intel.com
(backported from commit 0d2d201095)
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.
Fixes: f1541e15e3 ("clk: imx6sx: Switch to clk_hw based API")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- A couple of configuration fixes for the recently merged Loongarch drivers
- A fix to avoid dynamic allocation of a cpumask which was causing issues
with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver
-----BEGIN PGP SIGNATURE-----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=uGHJ
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irqchip fixes from Borislav Petkov:
"More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging
due to the whole Plumbers and vacations commotion.
- A couple of configuration fixes for the recently merged Loongarch
drivers
- A fix to avoid dynamic allocation of a cpumask which was causing
issues with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver"
* tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-pch-lpc: Add dependence on LoongArch
irqchip: Select downstream irqchip drivers for LoongArch CPU
irqchip/gic-v3-its: Remove cpumask_var_t allocation
irqchip/stm32-exti: Remove check on always false condition
- Terminate infinite loop in SD-UHS voltage switch
MMC host:
- hsq: Fix kernel crash in the recovery path
- moxart: Fix bus width configurations
- sdhci: Fix kernel panic for cqe irq
ARM_SCMI:
- Fixup clock management by reverting "firmware: arm_scmi: Add clock
management to the SCMI power domain"
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmM0BoQXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmFIw//ZhctvlbOQa2StMO2GrJfgQGi
ELclXWN1MzyyTN2v93LRrIwu1FR3vFV8sJ/80wlt+o0l4XBuwewmlUXdxGEdKwKA
2+Luj5f2sDf1z9wXsVLjybQ7ujD60jSrXgO6sGvF8a4cy0sCW7O3/3sytrXXHqzj
vU5zvr4Y6aBiruEpAFXBKyGWxpj0iFjvMo+ZuJpOHgHiVSF2UWOXuLbuAn04ESG6
Z3sn8qMZbTFI1HoE2XHF7xB10j9sYu09Urp57xAUFLuYf7Rr+MRNDqjByESnl9H7
SZcgomCoycUyjSDSLqdrr0Z4eJ7zacyHRHEYEzX/owAanE9GQpwGDauDYrVHFn7o
75uT6ZhJZwoLguM+6NiURYraIl75o4ijDKhFYrm+8dEmFfTi3hy9Ey86pFsr3UWm
RC+Dxi/oY7mkrpAEwJwkixzUGKqX/42a9zBcUbejE8x1UEw8sljboz3kEzTBlaDU
4mhdeY5//dHOhl3V8V9Oj9rQZJ7jfPJbrg0qK65EEDW5TumMTGnQzR9Zl1BfWBIA
lzIKq3USZ+5Gm8KvZ0yYq8bHmGaYKd/aFfZ3RTHIsPPx7pXt0G81SkE+eJ/jDkRN
FL7TU1wgWU9ovFw0N1LScr/EH/juIl+3bqhMRSuk5cBgDdVuCmKT5XS/694GfZkl
/JUySvxena/yGlNn/Mg=
=F5JH
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes. This time there is also a fix for the ARM SCMI
firmware driver, which has been acked by Sudeep Holla, the maintainer.
MMC core:
- Terminate infinite loop in SD-UHS voltage switch
MMC host:
- hsq: Fix kernel crash in the recovery path
- moxart: Fix bus width configurations
- sdhci: Fix kernel panic for cqe irq
ARM_SCMI:
- Fixup clock management by reverting 'firmware: arm_scmi: Add clock
management to the SCMI power domain'"
* tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: hsq: Fix data stomping during mmc recovery
Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"
mmc: core: Terminate infinite loop in SD-UHS voltage switch
mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
mmc: sdhci: Fix host->cmd is null
passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().
Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.
Fixes: 3159ed5779 "fs/coredump: use kmap_local_page()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It contains fixes for Polarire SoCs:
- fix panic at boot in clock initialization when building with clang-15
- make RTC's AHB clock critical as rtc will stop if the AHB
interface clock is disabled
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyLmDgAKCRCejrg/N2X7
/dS5AQD1meKPe/O9SPdiU3bibnVlOiYhi1DrLnLA5G1z/JQoTwD/WPeqm1DSWQ3g
8Z7CNVQJ40wTz9HgD7wt1n1U8guDfQs=
=P4U3
-----END PGP SIGNATURE-----
Merge tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes
Pull Microchip clock fixes for Polarfire SoCs:
- fix panic at boot in clock initialization when building with clang-15
- make RTC's AHB clock critical as rtc will stop if the AHB
interface clock is disabled
* tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: microchip: mpfs: make the rtc's ahb clock critical
clk: microchip: mpfs: fix clk_cfg array bounds violation
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmM0DS0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXS8bB/0UKBWajoi4p5zhPnflDk8iHJslbfPe
NRrLP4r7ZU9gxpa6Pbx7bIvIMlU7GbzF7zwOp20PmfbGsY+naABIzx6BOWYh4f2H
4qbOHoHG3SpsUWYGbhRsiXatxtIB1DfvqWMTGrbl4x4bE1dco40Pi/c+TMo6DtGt
uqKHxzoFB1LE/BRD0c1f1NFKkZ04rYrWL9TS00plxV2T7V3srmQ3eaxAAtuI9peV
NbnUoV6zwleAKzyeOTvzdF6xsTHEuQ4S3f7rXAEMLzuoZjbm4noe3CgiKM6TurWW
ZR7495k9s2kL2ObjmsoH+mj93J0S6Cmtu+AQWHfJbDSIaZfu5WzyllTI
=LvG9
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-09-28
The patch is by me and targets the c_can driver. It disables an
optimization in the TX path of C_CAN cores which causes problems.
* tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: c_can: don't cache TX messages for C_CAN cores
====================
Link: https://lore.kernel.org/r/20220928090629.1124190-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a CONFIG_SMP=n kernel, the LLC shared mask is 0, which prevents
__cache_amd_cpumap_setup() from doing the L3 masks setup, and more
specifically from setting up the shared_cpu_map and shared_cpu_list
files in sysfs, leading to lscpu from util-linux getting confused and
segfaulting.
Add a cpu_llc_shared_mask() UP variant which returns a mask with a
single bit set, i.e., for CPU0.
Fixes: 2b83809a5e ("x86/cpu/amd: Derive L3 shared_cpu_map from cpu_llc_shared_mask")
Reported-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1660148115-302-1-git-send-email-ssengar@linux.microsoft.com
This reverts commit 1d0403d20f.
Anatoly Pugachev reported that the commit 1d0403d20f ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Vasily Averin <vvs@openvz.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1d0403d20f ("net: set proper memcg for net_init hooks allocations")
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When synthesizing event with SPE data source, commit 4e6430cbb1a9("perf
arm-spe: Use SPE data source for neoverse cores") augment the type with
source information by MIDR. However, is_midr_in_range only compares the
first entry in neoverse_spe.
Change is_midr_in_range to is_midr_in_range_list to traverse the
neoverse_spe array so that all neoverse cores synthesize event with data
source packet.
Fixes: 4e6430cbb1 ("perf arm-spe: Use SPE data source for neoverse cores")
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Link: https://lore.kernel.org/r/1664197396-42672-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The testcase “vmlinux-kallsyms.c” fails in powerpc.
vmlinux symtab matches kallsyms: FAILED!
This test look at the symbols in the vmlinux DSO and check if we find
all of them in the kallsyms dso.
But from the powerpc logs , observed that the failure happens for:
ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms
ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms
These are labels ( with .L) in the source code and has to be ignored.
Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S
The testcases invokes is_ignored_symbol() function to ignore hidden
symbols in the dso like local symbols. This function is adapted from
is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The
kernel function got some updates which is not reflected in the testcase
function and the new updates also handles ignoring "labels".
Below is the changes that went in the kernel function.
/* Symbol names that begin with the following are ignored.*/
static const char * const ignored_prefixes[] = {
"$", /* local symbols for ARM, MIPS, etc. */
- ".LASANPC", /* s390 kasan local symbols */
+ ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */
"__crc_", /* modversions */
"__efistub_", /* arm64 EFI stub namespace */
- "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */
+ "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */
+ "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */
"__AArch64ADRPThunk_", /* arm64 lld */
"__ARMV5PILongThunk_", /* arm lld */
"__ARMV7PILongThunk_",
This change is part of below commits and will handle the
symbols with “.L”
commit d4c8586432 ("kallsyms: ignore all local labels prefixed by '.L'")
commit 6ccf9cb557 ("KVM: arm64: Symbolize the nVHE HYP addresses")
Update the testcase function to include the new changes.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused
by invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI
bus.
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms.
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual
path in the linux-firmware package.
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle.
-----BEGIN PGP SIGNATURE-----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=3Mv6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
RQT objects require that a power of two value be configured for both
rqt_max_size and rqt_actual size.
For create_rqt, make sure to round up to the power of two the value of
given by the user who created the vdpa device and given by
ndev->rqt_size. The actual size is also rounded up to the power of two
using the current number of VQs given by ndev->cur_num_vqs.
Same goes with modify_rqt where we need to make sure act size is power
of two based on the new number of QPs.
Without this patch, attempt to create a device with non power of two QPs
would result in error from firmware.
Fixes: 52893733f2 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220912125019.833708-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the VDUSE application provides a smaller config space
than the driver expects, the driver may use uninitialized
memory from the stack.
This patch prevents it by initializing the buffer passed by
the driver to store the config value.
This fix addresses CVE-2022-2308.
Cc: stable@vger.kernel.org # v5.15+
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20220831154923.97809-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Fix virtio test compilation failure caused by vq reset.
../../drivers/virtio/virtio_ring.c: In function ‘vring_create_virtqueue_packed’:
../../drivers/virtio/virtio_ring.c:1999:8: error: ‘struct virtqueue’ has no member named ‘reset’
1999 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘__vring_new_virtqueue’:
../../drivers/virtio/virtio_ring.c:2493:8: error: ‘struct virtqueue’ has no member named ‘reset’
2493 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘virtqueue_resize’:
../../drivers/virtio/virtio_ring.c:2587:18: error: ‘struct virtqueue’ has no member named ‘num_max’
2587 | if (num > vq->vq.num_max)
| ^
../../drivers/virtio/virtio_ring.c:2596:11: error: ‘struct virtio_device’ has no member named ‘config’
2596 | if (!vdev->config->disable_vq_and_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2599:11: error: ‘struct virtio_device’ has no member named ‘config’
2599 | if (!vdev->config->enable_vq_after_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2602:12: error: ‘struct virtio_device’ has no member named ‘config’
2602 | err = vdev->config->disable_vq_and_reset(_vq);
| ^~
../../drivers/virtio/virtio_ring.c:2614:10: error: ‘struct virtio_device’ has no member named ‘config’
2614 | if (vdev->config->enable_vq_after_reset(_vq))
| ^~
make: *** [<builtin>: virtio_ring.o] Error 1
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20220830110549.103168-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix memory-leak for virtio-crypto akcipher request, this problem is
introduced by 59ca6c93387d3(virtio-crypto: implement RSA algorithm).
The leak can be reproduced and tested with the following script
inside virtual machine:
#!/bin/bash
LOOP_TIMES=10000
# required module: pkcs8_key_parser, virtio_crypto
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
modprobe virtio_crypto # if CONFIG_CRYPTO_DEV_VIRTIO=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=230
# generate private key and self-signed cert
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem \
-outform der -out cert.der \
-subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=always.com/emailAddress=yy@always.com"
# convert private key from pem to der
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
# add key
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
# query key
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
# here we only run pkey_encrypt becasuse it is the fastest interface
function bench_pub() {
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
}
# do bench_pub in loop to obtain the memory leak
for (( i = 0; i < ${LOOP_TIMES}; ++i )); do
bench_pub
done
Signed-off-by: lei he <helei.sig11@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <20220919075158.3625-1-helei.sig11@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The q_pair_id to address a queue pair in the lm bar should be
calculated by queue_id / 2 rather than queue_id / nr_vring.
Fixes: 2ddae773c9 ("vDPA/ifcvf: detect and use the onboard number of queues directly")
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220923091013.191-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
during the suspend time. Furthermore, we cannot request a
mode 1 reset under SRIOV as VF. Therefore, we will skip it
as it is called in suspend_noirq() function.
- In the resume code path, we need to send REQ_GPU_INIT to the
hypervisor and also resume PSP IP block under SRIOV.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The function amdgpu_fence_count_emitted used in work_hander should not call
amdgpu_fence_process which must be used in irq handler.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current position calulated in gfx_v9_0_ring_emit_patch_cond_exec
underflows when the wptr is divisible by ring->buf_mask + 1.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.
[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.
[How]
Skip divider programming when divider values are the same to prevent FIFO
error.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove assert that will hit during odm transition case, since this is a
valid case.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "dc: skip audio setup when audio stream is enabled"
This reverts commit 65fbfb02c2
[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.
[how]
skip audio setup for pipelines which audio stream has been enabled
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We rely on DMCUB to do this when disabling the link but it should
actually come before we disable the DP VID stream.
If we don't then the FIFO can end up with underflow that persists
the next time it's enabled.
[How]
Add a DCN314 specific blank sequence that will disable the DIG FIFO
first.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DIO FIFO will underflow if we turn off the OTG before we turn
off the FIFO.
Since this happens as part of the OTG workaround and we don't reset
the FIFO afterwards we see the error persist.
[How]
Add disable FIFO before the disable CRTC and enable FIFO after enabling
the CRTC.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoids a race condition where DIO FIFO can underflow due to no incoming
data available.
[How]
Shift the FIFO enable below stream enable.
Make sure fullness level is written before the DIO reset takes place
and that we're not doing it twice.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Update to new SR latencies for DCN32
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.
[How]
Skip divider programming when divider values are the same to prevent FIFO
error.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shader wave interrupts were getting dropped in event_interrupt_wq_v11
if the PRIV bit was set to 1. This would often lead to a hang. Until
debugger logic is upstreamed, expand comment to stop early return.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also
re-use gds_size for the queue size (unused for KFD). MES requires the
queue size in order to compute the actual wptr offset within the queue
RB since it increases monotonically for AQL queues.
v2: Make is_aql_queue assign clearer
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yanteng Si
Huacai Chen
Jakub Kicinski
Menglong Dong
Daniel Golle
Vladimir Oltean
Peng Fan
Florian Fainelli
Jens Axboe
Jernej Skrabec
Ashutosh Dixit
Han Xu
Linus Torvalds
Al Viro
Stephen Boyd
Borislav Petkov
Shakeel Butt
Jing Zhang
Athira Rajeev
Damien Le Moal
Marc Kleine-Budde
Eli Cohen
Maxime Coquelin
Suwan Kim
Xuan Zhuo
lei he
Angus Chen
Bokun Zhang
Jiadong.Zhu
Samson Tam
Taimur Hassan
Eric Bernstein
Aric Cyr
Nicholas Kazlauskas
Alvin Lee
Graham Sider