Граф коммитов

26 Коммитов

Автор SHA1 Сообщение Дата
Sage Weil d69ed05a80 ceph: handle splice_dentry/d_materialize_unique error in readdir_prepopulate
Handle a splice_dentry failure (due to a d_materialize_unique error)
without crashing.  (Also, report the error code.)

Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21 16:04:10 -07:00
Henry C Chang 13a4214cd9 ceph: fix d_subdirs ordering problem
We misused list_move_tail() to order the dentry in d_subdirs.
This will screw up the d_subdirs order.

This bug can be reliably reproduced by:
1. mount ceph fs.
2. on ceph fs, git clone git://ceph.newdream.net/git/ceph.git
3. Run autogen.sh in ceph directory.
(Note: Errors only occur at the first time you run autogen.sh.)

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-01 16:55:55 -07:00
Julia Lawall 7e34bc524e fs/ceph: Use ERR_CAST
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of
the returned value is the same as the type of the enclosing function.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-29 09:12:41 -07:00
Sage Weil 167c9e352d ceph: use common helper for aborted dir request invalidation
We invalidate I_COMPLETE and dentry leases in two places: on aborted mds
request and on request replay.  Use common helper to avoid duplicate code.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:40 -07:00
Sage Weil 1cd3935bed ceph: set dn offset when spliced
We want to assign an offset when the dentry goes from null to linked, which
is always done by splice_dentry().  Notably, we should NOT assign an
offset when a dentry is first created and is still null.

BUG if we try to splice a non-null dentry (we shouldn't).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:28 -07:00
Sage Weil 1b7facc41b ceph: don't clobber i_max_offset on already complete dir
This can screw up offsets assigned to new dentries and break dcache
readdir results.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:27 -07:00
Sage Weil e8a7498715 ceph: skip set_dentry_offset work if directory not I_COMPLETE
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:27 -07:00
Sage Weil a6424e48c8 ceph: fix xattr dangling pointer / double free
If we use the xattr_blob, clear the pointer so we don't release the memory
at the bottom of the fuction.

Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:25 -07:00
Cheng Renquan 640ef79d27 ceph: use ceph_sb_to_client instead of ceph_client
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.

  -static inline struct ceph_client *ceph_client(struct super_block *sb)
  -{
  -	return sb->s_fs_info;
  -}

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:17 -07:00
Sage Weil 81a6cf2d30 ceph: invalidate affected dentry leases on aborted requests
If we abort a request, we return to caller, but the request may still
complete.  And if we hold the dir FILE_EXCL bit, we may not release a
lease when sending a request.  A simple un-tar, control-c, un-tar again
will reproduce the bug (manifested as a 'Cannot open: File exists').

Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so
we don't have valid (but incorrect) leases.  Do the same, consistently, at
other sites where I_COMPLETE is similarly cleared.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 10:25:45 -07:00
Sage Weil 04d000eb35 ceph: fix open file counting on snapped inodes when mds returns no caps
It's possible the MDS will not issue caps on a snapped inode, in which case
an open request may not __ceph_get_fmode(), botching the open file
counting.  (This is actually a server bug, but the client shouldn't BUG out
in this case.)

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 09:53:55 -07:00
Sage Weil c10f5e12ba ceph: clear dir complete on d_move
d_move() reorders the d_subdirs list, breaking the readdir result caching.
Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on
rename.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03 10:49:22 -07:00
Sage Weil 9358c6d4c0 ceph: fix dentry rehashing on virtual .snap dir
If a lookup fails on the magic .snap directory, we bind it to a magic
snap directory inode in ceph_lookup_finish().  That code assumes the dentry
is unhashed, but a recent server-side change started returning NULL leases
on lookup failure, causing the .snap dentry to be hashed and NULL by
ceph_fill_trace().

This causes dentry hash chain corruption, or a dies when d_rehash()
includes
	BUG_ON(!d_unhashed(entry));

So, avoid processing the NULL dentry lease if it the dentry matches the
snapdir name in ceph_fill_trace().  That allows the lookup completion to
properly bind it to the snapdir inode.  BUG there if dentry is hashed to
be sure.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-30 13:55:22 -07:00
Sage Weil 8b218b8a4a ceph: fix inode removal from snap realm when racing with migration
When an inode was dropped while being migrated between two MDSs,
i_cap_exporting_issued was non-zero such that issue caps were non-zero and
__ceph_is_any_caps(ci) was true.  This prevented the inode from being
removed from the snap realm, even as it was dropped from the cache.

Fix this by dropping any residual i_snap_realm ref in destroy_inode.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-20 21:33:08 -07:00
Yehuda Sadeh c9af9fb68e ceph: don't truncate dirty pages in invalidate work thread
Instead of truncating the whole range of pages, we skip those
pages that are dirty or in the middle of writeback. Those pages
will be cleared later when the writeback completes.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-19 14:40:51 -08:00
Sage Weil 2c27c9a57c ceph: fix typo in ceph_queue_writeback debug output
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 15:45:51 -08:00
Sage Weil 3c6f6b79a6 ceph: cleanup async writeback, truncation, invalidate helpers
Grab inode ref in helper.  Make work functions static, with consistent
naming.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:54 -08:00
Yehuda Sadeh 3d497d858a ceph: fix truncation when not holding caps
A truncation should occur when either we have the
specified caps for the file, or (in cases where we are
not the only ones referencing the file) when it is mapped
or when it is opened. The latter two cases were not
handled.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:51 -08:00
Yehuda Sadeh 0f26c4b21b ceph: remove unreachable code
We never truncate to a smaller size without contacting the MDS.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-29 12:42:39 -08:00
Sage Weil 5b1daecd59 ceph: properly handle aborted mds requests
Previously, if the MDS request was interrupted, we would unregister the
request and ignore any reply.  This could cause the caps or other cache
state to become out of sync.  (For instance, aborting dbench and doing
rm -r on clients would complain about a non-empty directory because the
client didn't realize it's aborted file create request completed.)

Even we don't unregister, we still can't process the reply normally because
we are no longer holding the caller's locks (like the dir i_mutex).

So, mark aborted operations with r_aborted, and in the reply handler, be
sure to process all the caps.  Do not process the namespace changes,
though, since we no longer will hold the dir i_mutex.  The dentry lease
state can also be ignored as it's more forgiving.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-25 11:49:51 -08:00
Yehuda Sadeh 4baa75ef0e ceph: change dentry offset and position after splice_dentry
This fixes a bug, where we had the parent list have dentries with
offsets that are not monotonically increasing, which caused the ceph
dcache_readdir to skip entries.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-14 12:23:14 -08:00
Sage Weil c4a29f26d5 ceph: ensure rename target dentry fails revalidation
This works around a bug in vfs_rename_dir() that rehashes the target
dentry.  Ensure such dentries always fail revalidation by timing out the
dentry lease and kicking it out of the current directory lease gen.

This can be reverted when the vfs bug is fixed.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:57 -08:00
Sage Weil b6c1d5b81e ceph: simplify ceph_buffer interface
We never allocate the ceph_buffer and buffer separtely, so use a single
constructor.

Disallow put on NULL buffer; make the caller check.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 12:17:17 -08:00
Sage Weil b377ff13b3 ceph: initialize i_size/i_rbytes on snapdir
Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-11 15:50:28 -08:00
Sage Weil 232d4b0131 ceph: move directory size logic to ceph_getattr
We can't fill i_size with rbytes at the fill_file_size stage without
adding additional checks for directories.  Notably, we want st_blocks
to remain 0 on directories so that 'du' still works.

Fill in i_blocks, i_size specially in ceph_getattr instead.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-21 11:24:36 -07:00
Sage Weil 355da1eb7a ceph: inode operations
Inode cache and inode operations.  We also include routines to
incorporate metadata structures returned by the MDS into the client
cache, and some helpers to deal with file capabilities and metadata
leases.  The bulk of that work is done by fill_inode() and
fill_trace().

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:08 -07:00