The NMI watchdog status is required for metric group constraint
examination. Factor out sysctl__nmi_watchdog_enabled() to retrieve the
NMI watchdog status.
Users may count more than one metric group each time. If so, the NMI
watchdog status may be retrieved several times. To reduce the overhead,
cache the NMI watchdog status.
Replace the NMI watchdog status checking in print_footer() by
sysctl__nmi_watchdog_enabled().
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further reducing the util.c hodgepodge files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0i62zh7ok25znibyebgq0qs4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was done just to have users of writen() and readn(), that before
had their prototypes in util/util.h to get it without having to add an
include for internal/lib.h, but the right way is to add it and by now
all places already do it.
Fix a fallout were readlink() was used but unistd.h was being obtained
by luck thru util.h -> internal/lib.h, now to check why unistd.h is
being included there...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lcnytgrtafey3kwlfog2rzzj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the 'page_size' variable in libperf, so move it there.
Add a libperf_init() as a global libperf init function to obtain this
value via sysconf() at tool start.
Committer notes:
Add internal/lib.h to tools/perf/ files using 'page_size', sometimes
replacing util.h with it if that was the only reason for having util.h
included.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To disentangle util/sort.h a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6kbf2cauas06rbqp15pyter5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the readn()/writen() functions into libperf.
Keep those non-namespaced names because they will be shared only between
perf and libperf.
Again, these are not exported functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-61-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And in a separate header, so that we erode util.h a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xpzvuu9d0gei9jl9bkzgobln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of util.h, to reduce its scope, and since we have a namespaces.h
header, much better to have it there, where it is related to.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zlu81bbtccuzygh7m8nmgybc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just removing more stuff from tools/perf/, this is mostly used in the
kallsyms parsing and in places in perf where kallsyms is involved, so we
get it for free there.
With this we reduce a bit more util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5mc1zg0jqdwgkn8c358kaba6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove perf.data including the directory, with checking on expected
files and no other directories inside.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used outside of util object in following patches.
Committer note:
We need to have the header with the definition for loff_t in util.h
since we now use it in the copyfile_offset() signature.
Also move that prototype closer to the other copyfile_ prefixed
functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Let tools that need to have those variables with the sysctl current
values use a function that will read them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1ljj3oeo5kpt2n1icfd9vowe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not read as commonly as 'page_size', so it makes sense to read it
lazily, caching its value when it is first read.
Less files open unconditionally at startup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-35xhrq91u94uc1djtclek1ie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only thing that is needed there is a forward declaration for 'struct
nsinfo', so disentanble this, which in turns allows built-in clang
builds, i.e. 'make LIBCLANGLLVM=1 -C tools/perf'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vq26rsuwq1cqylpcyvq89c84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be more generally available and get the build on centos:5 to
work after we use O_CLOEXEC in the next patch, in the util/dso.c file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang YanQing <udknight@gmail.com>
Link: https://lkml.kernel.org/n/tip-vsjbiydh15pfqomxw1kx64ex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no usage outside util.c and this is the only remaining reason
for fcntl.h to be included in util.h, to get the loff_t definition in
Alpine Linux, so make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2dzlsao7k6ihozs5karw6kpx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make buf in helper function "writen" constant to simplify the life of
its callers.
This requires to hack a cast of buf prior to passing it to "ion" which
is simpler than the alternative of reworking the "ion" function to
provide a read and a write paths, the latter with constant buf argument.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And provide an alternative implementation to keep perf building on older
distros as we're about to add initial support for namespaces.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To consolidate the error reporting facility.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now everything uses pr_warning(), so ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hv8r0mgdhk73wtfq3zrhavgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Curious as to what this was for I looked at /usr/include/ and only some
python headers define this, and it ends up being to enable "extensions"
on some old OSes:
/* Enable extensions on AIX 3, Interix */
I guess we can remove this one safely.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.
Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform printf like
vargargs validation.
v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to specify that a function doesn't return,
instead of the open coded:
__attribute__((noreturn))
And use it instead of the tools/perf/ specific variation, NORETURN.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l0y144qzixcy5t4c6i7pdiqj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both had copies originating from git.git, move those to
tools/lib/string.c, getting both tools/lib/subcmd/ and tools/perf/ to
use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uidwtticro1qhttzd2rkrkg1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its basically to do units handling, so move to a more appropriately
named object.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-90ob9vfepui24l8l2makhd9u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a perl specific hack, so move it from util.h to where perl
headers are used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4igctbinuom2sr6g4b03jqht@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just one more step into splitting util.[ch] to reduce the includes hell.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-navarr9mijkgwgbzu464dwam@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More needs to be done to have the actual functions and variables in a
smaller .c file that can then be included in the python binding,
avoiding dragging more stuff into it.
Link: http://lkml.kernel.org/n/tip-uecxz7cqkssouj7tlxrkqpl4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is going away from util.h, where it is not needed.
This is mostly for things like MAXPATHLEN, MAX() and MIN(), these later
two probably should go away in favor of its kernel sources replacements.
Link: http://lkml.kernel.org/n/tip-z1666f3fl3fqobxvjr5o2r39@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of util.h, to disentangle it a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vpksyj3w5fk9t8s6mxmkajyr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang
Arnaldo Carvalho de Melo
Jiri Olsa
Andi Kleen
Ingo Molnar
Greg Kroah-Hartman
David Carrillo-Cisneros
Krister Johansen