# SPDX-License-Identifier: GPL-2.0 # # Makefile for linux/drivers/scsi # # 30 May 2000, Christoph Hellwig # Rewritten to use lists instead of if-statements. # # 20 Sep 2000, Torben Mathiasen # Changed link order to reflect new scsi initialization. # # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*! # The link order must be, SCSI Core, SCSI HBA drivers, and # lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to # satisfy certain initialization assumptions in the SCSI layer. # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*! CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS obj-$(CONFIG_PCMCIA) += pcmcia/ obj-$(CONFIG_SCSI) += scsi_mod.o obj-$(CONFIG_RAID_ATTRS) += raid_class.o # --- NOTE ORDERING HERE --- # For kernel non-modular link, transport attributes need to # be initialised before drivers # -------------------------- obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/ obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o obj-$(CONFIG_SCSI_DH) += device_handler/ obj-$(CONFIG_LIBFC) += libfc/ obj-$(CONFIG_LIBFCOE) += fcoe/ obj-$(CONFIG_FCOE) += fcoe/ obj-$(CONFIG_FCOE_FNIC) += fnic/ obj-$(CONFIG_SCSI_SNIC) += snic/ obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/ obj-$(CONFIG_QEDF) += qedf/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o obj-$(CONFIG_SCSI_ZORRO_ESP) += esp_scsi.o zorro_esp.o obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o obj-$(CONFIG_MAC_SCSI) += mac_scsi.o obj-$(CONFIG_SCSI_MAC_ESP) += esp_scsi.o mac_esp.o obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/ obj-$(CONFIG_SCSI_AHA152X) += aha152x.o obj-$(CONFIG_SCSI_AHA1542) += aha1542.o obj-$(CONFIG_SCSI_AHA1740) += aha1740.o obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/ obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/ obj-$(CONFIG_SCSI_LPFC) += lpfc/ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/ obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o obj-$(CONFIG_SCSI_HPSA) += hpsa.o obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi/ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o obj-$(CONFIG_CXLFLASH) += cxlflash/ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/ obj-$(CONFIG_SCSI_UFSHCD) += ufs/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o obj-$(CONFIG_SCSI_INITIO) += initio.o obj-$(CONFIG_SCSI_INIA100) += a100u2w.o obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o obj-$(CONFIG_SCSI_MESH) += mesh.o obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_IMM) += imm.o obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi_tgt/ obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/ obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_SCSI_STEX) += stex.o obj-$(CONFIG_SCSI_MVSAS) += mvsas/ obj-$(CONFIG_SCSI_MVUMI) += mvumi.o obj-$(CONFIG_PS3_ROM) += ps3rom.o obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/ obj-$(CONFIG_QEDI) += libiscsi.o qedi/ obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/ obj-$(CONFIG_SCSI_ESAS2R) += esas2r/ obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o obj-$(CONFIG_XEN_SCSI_FRONTEND) += xen-scsifront.o obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o obj-$(CONFIG_SCSI_WD719X) += wd719x.o obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_CHR_DEV_ST) += st.o obj-$(CONFIG_CHR_DEV_OSST) += osst.o obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o obj-$(CONFIG_CHR_DEV_SG) += sg.o obj-$(CONFIG_CHR_DEV_SCH) += ch.o obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/ obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/ # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \ scsicam.o scsi_error.o scsi_lib.o scsi_mod-y += scsi_common.o scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o scsi_mod-$(CONFIG_BLK_DEBUG_FS) += scsi_debugfs.o scsi_mod-y += scsi_trace.o scsi_logging.o scsi_mod-$(CONFIG_PM) += scsi_pm.o scsi_mod-$(CONFIG_SCSI_DH) += scsi_dh.o hv_storvsc-y := storvsc_drv.o sd_mod-objs := sd.o sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o sd_mod-$(CONFIG_BLK_DEV_ZONED) += sd_zbc.o sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ := -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \ -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o # Files generated that shall be removed upon make clean clean-files := 53c700_d.h 53c700_u.h $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h $(obj)/scsi_sysfs.o: $(obj)/scsi_devinfo_tbl.c quiet_cmd_bflags = GEN $@ cmd_bflags = sed -n 's/.*BLIST_\([A-Z0-9_]*\) *.*/BLIST_FLAG_NAME(\1),/p' $< > $@ $(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h $(call if_changed,bflags) # If you want to play with the firmware, uncomment # GENERATE_FIRMWARE := 1 ifdef GENERATE_FIRMWARE $(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $< endif