/* * Copyright 2013 Maxime Ripard * * Maxime Ripard * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "skeleton.dtsi" / { interrupt-parent = <&intc>; cpus { cpu@0 { compatible = "arm,cortex-a8"; }; }; memory { reg = <0x40000000 0x20000000>; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; /* * This is a dummy clock, to be used as placeholder on * other mux clocks when a specific parent clock is not * yet implemented. It should be dropped when the driver * is complete. */ dummy: dummy { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; }; osc24M: osc24M@01c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-osc-clk"; reg = <0x01c20050 0x4>; clock-frequency = <24000000>; }; osc32k: osc32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; pll1: pll1@01c20000 { #clock-cells = <0>; compatible = "allwinner,sun4i-pll1-clk"; reg = <0x01c20000 0x4>; clocks = <&osc24M>; }; pll4: pll4@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-pll1-clk"; reg = <0x01c20018 0x4>; clocks = <&osc24M>; }; pll5: pll5@01c20020 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll5-clk"; reg = <0x01c20020 0x4>; clocks = <&osc24M>; clock-output-names = "pll5_ddr", "pll5_other"; }; pll6: pll6@01c20028 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-cpu-clk"; reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; }; axi: axi@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-axi-clk"; reg = <0x01c20054 0x4>; clocks = <&cpu>; }; axi_gates: axi_gates@01c2005c { #clock-cells = <1>; compatible = "allwinner,sun4i-axi-gates-clk"; reg = <0x01c2005c 0x4>; clocks = <&axi>; clock-output-names = "axi_dram"; }; ahb: ahb@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-ahb-clk"; reg = <0x01c20054 0x4>; clocks = <&axi>; }; ahb_gates: ahb_gates@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve", "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi", "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; apb0: apb0@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb0-clk"; reg = <0x01c20054 0x4>; clocks = <&ahb>; }; apb0_gates: apb0_gates@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio", "apb0_ir", "apb0_keypad"; }; apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&apb1_mux>; }; apb1_gates: apb1_gates@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; }; soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; status = "disabled"; }; mdio@01c0b080 { compatible = "allwinner,sun4i-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a10s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PB19", "PB20"; allwinner,function = "uart0"; allwinner,drive = <0>; allwinner,pull = <0>; }; uart2_pins_a: uart2@0 { allwinner,pins = "PC18", "PC19"; allwinner,function = "uart2"; allwinner,drive = <0>; allwinner,pull = <0>; }; uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; allwinner,drive = <0>; allwinner,pull = <0>; }; emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB15", "PB16"; allwinner,function = "i2c1"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB17", "PB18"; allwinner,function = "i2c2"; allwinner,drive = <0>; allwinner,pull = <0>; }; }; timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&osc24M>; }; wdt: watchdog@01c20c90 { compatible = "allwinner,sun4i-wdt"; reg = <0x01c20c90 0x10>; }; sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; status = "disabled"; }; uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; status = "disabled"; }; uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; status = "disabled"; }; uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; status = "disabled"; }; i2c0: i2c@01c2ac00 { #address-cells = <1>; #size-cells = <0>; compatible = "allwinner,sun4i-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; }; i2c1: i2c@01c2b000 { #address-cells = <1>; #size-cells = <0>; compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; }; i2c2: i2c@01c2b400 { #address-cells = <1>; #size-cells = <0>; compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; }; }; };