menu "Kernel hacking" source "lib/Kconfig.debug" config STRICT_DEVMEM bool "Filter access to /dev/mem" depends on MMU ---help--- If this option is disabled, you allow userspace (root) access to all of memory, including kernel and userspace memory. Accidental access to this is obviously disastrous, but specific access can be used by people debugging the kernel. If this option is switched on, the /dev/mem file only allows userspace access to memory mapped peripherals. If in doubt, say Y. # RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to # n, but then RMK will have to kill you ;). config FRAME_POINTER bool depends on !THUMB2_KERNEL default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER help If you say N here, the resulting kernel will be slightly smaller and faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, when a problem occurs with the kernel, the information that is reported is severely limited. config ARM_UNWIND bool "Enable stack unwinding support (EXPERIMENTAL)" depends on AEABI default y help This option enables stack unwinding support in the kernel using the information automatically generated by the compiler. The resulting kernel image is slightly bigger but the performance is not affected. Currently, this feature only works with EABI compilers. If unsure say Y. config OLD_MCOUNT bool depends on FUNCTION_TRACER && FRAME_POINTER default y config DEBUG_USER bool "Verbose user fault messages" help When a user program crashes due to an exception, the kernel can print a brief message explaining what the problem was. This is sometimes helpful for debugging but serves no purpose on a production system. Most people should say N here. In addition, you need to pass user_debug=N on the kernel command line to enable this feature. N consists of the sum of: 1 - undefined instruction events 2 - system calls 4 - invalid data aborts 8 - SIGSEGV faults 16 - SIGBUS faults # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. Note that selecting this option will limit the kernel to a single UART definition, as specified below. Attempting to boot the kernel image on a different platform *will not work*, so this option should not be enabled for kernels that are intended to be portable. choice prompt "Kernel low-level debugging port" depends on DEBUG_LL config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 select DEBUG_UART_PL01X config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X help Say Y here if you want the debug print routines to direct their output to the first serial port on these devices. config DEBUG_CLPS711X_UART2 bool "Kernel low-level debugging messages via UART2" depends on ARCH_CLPS711X help Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. config DEBUG_CNS3XXX bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" depends on ARCH_CNS3XXX select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the CNS3xxx UART0. config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on DaVinci DA8XX devices. config DEBUG_DAVINCI_DA8XX_UART2 bool "Kernel low-level debugging on DaVinci DA8XX using UART2" depends on ARCH_DAVINCI_DA8XX select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART2 serial port on DaVinci DA8XX devices. config DEBUG_DAVINCI_DMx_UART0 bool "Kernel low-level debugging on DaVinci DMx using UART0" depends on ARCH_DAVINCI_DMx select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. config DEBUG_DAVINCI_TNETV107X_UART1 bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" depends on ARCH_DAVINCI_TNETV107X select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on DaVinci TNETV107X devices. config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ help Say Y here if you want the debug print routines to direct their output to UART0 on the Zynq platform. config DEBUG_ZYNQ_UART1 bool "Kernel low-level debugging on Xilinx Zynq using UART1" depends on ARCH_ZYNQ help Say Y here if you want the debug print routines to direct their output to UART1 on the Zynq platform. If you have a ZC702 board and want early boot messages to appear on the USB serial adaptor, select this option. config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE help Say Y here if you want the debug print routines to direct their output to the serial port in the DC21285 (Footbridge). config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE help Say Y here if you want the debug print routines to direct their output to the 8250 at PCI COM1. config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. config DEBUG_IMX1_UART bool "i.MX1 Debug UART" depends on SOC_IMX1 help Say Y here if you want kernel low-level debugging support on i.MX1. config DEBUG_IMX23_UART bool "i.MX23 Debug UART" depends on SOC_IMX23 select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX23. config DEBUG_IMX25_UART bool "i.MX25 Debug UART" depends on SOC_IMX25 help Say Y here if you want kernel low-level debugging support on i.MX25. config DEBUG_IMX21_IMX27_UART bool "i.MX21 and i.MX27 Debug UART" depends on SOC_IMX21 || SOC_IMX27 help Say Y here if you want kernel low-level debugging support on i.MX21 or i.MX27. config DEBUG_IMX28_UART bool "i.MX28 Debug UART" depends on SOC_IMX28 select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX28. config DEBUG_IMX31_UART bool "i.MX31 Debug UART" depends on SOC_IMX31 help Say Y here if you want kernel low-level debugging support on i.MX31. config DEBUG_IMX35_UART bool "i.MX35 Debug UART" depends on SOC_IMX35 help Say Y here if you want kernel low-level debugging support on i.MX35. config DEBUG_IMX51_UART bool "i.MX51 Debug UART" depends on SOC_IMX51 help Say Y here if you want kernel low-level debugging support on i.MX51. config DEBUG_IMX53_UART bool "i.MX53 Debug UART" depends on SOC_IMX53 help Say Y here if you want kernel low-level debugging support on i.MX53. config DEBUG_IMX6Q_UART bool "i.MX6Q/DL Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support on i.MX6Q/DL. config DEBUG_IMX6SL_UART bool "i.MX6SL Debug UART" depends on SOC_IMX6SL help Say Y here if you want kernel low-level debugging support on i.MX6SL. config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART0 serial port on KEYSTONE2 devices. config DEBUG_KEYSTONE_UART1 bool "Kernel low-level debugging on KEYSTONE2 using UART1" depends on ARCH_KEYSTONE select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MMP UART2. config DEBUG_MMP_UART3 bool "Kernel low-level debugging message via MMP UART3" depends on ARCH_MMP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MMP UART3. config DEBUG_MSM_UART1 bool "Kernel low-level debugging messages via MSM UART1" depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct their output to the first serial port on MSM devices. config DEBUG_MSM_UART2 bool "Kernel low-level debugging messages via MSM UART2" depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct their output to the second serial port on MSM devices. config DEBUG_MSM_UART3 bool "Kernel low-level debugging messages via MSM UART3" depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct their output to the third serial port on MSM devices. config DEBUG_MSM8660_UART bool "Kernel low-level debugging messages via MSM 8660 UART" depends on ARCH_MSM8X60 select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct their output to the serial port on MSM 8660 devices. config DEBUG_MSM8960_UART bool "Kernel low-level debugging messages via MSM 8960 UART" depends on ARCH_MSM8960 select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct their output to the serial port on MSM 8960 devices. config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MVEBU based platforms. This option should be used with the old bootloaders that left the internal registers mapped at 0xd0000000. As of today, this is the case on platforms such as the Globalscale Mirabox or the Plathome OpenBlocks AX3, when using the original bootloader. If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. config DEBUG_MVEBU_UART_ALTERNATE bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MVEBU based platforms. This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on NOMADIK based platforms. config DEBUG_NSPIRE_CLASSIC_UART bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" depends on ARCH_NSPIRE select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on TI-NSPIRE classic models. config DEBUG_NSPIRE_CX_UART bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" depends on ARCH_NSPIRE select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. config DEBUG_OMAP2UART1 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART help This covers at least h4, 2430sdp, 3430sdp, 3630sdp, omap3 torpedo and 3530 lv som. config DEBUG_OMAP2UART2 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_OMAP2UART3 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_OMAP3UART3 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART help This covers at least cm_t3x, beagle, crane, devkit8000, igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, and 3517evm. config DEBUG_OMAP4UART3 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_OMAP3UART4 bool "Kernel low-level debugging messages via OMAP36XX UART4" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_OMAP4UART4 bool "Kernel low-level debugging messages via OMAP4/5 UART4" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_TI81XXUART2 bool "Kernel low-level debugging messages via TI81XX UART2" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_TI81XXUART3 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_AM33XXUART1 bool "Kernel low-level debugging messages via AM33XX UART1" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_ZOOM_UART bool "Kernel low-level debugging messages via Zoom2/3 UART" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL bool "Use PicoXcell UART for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on PXA UART1. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the serial port on RealView EB, PB11MP, PBA8 and PBX platforms. config DEBUG_REALVIEW_PB1176_PORT bool "RealView PB1176 UART" depends on MACH_REALVIEW_PB1176 select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the standard serial port on the RealView PB1176 platform. config DEBUG_RK29_UART0 bool "Kernel low-level debugging messages via Rockchip RK29 UART0" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK29_UART1 bool "Kernel low-level debugging messages via Rockchip RK29 UART1" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK29_UART2 bool "Kernel low-level debugging messages via Rockchip RK29 UART2" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK3X_UART0 bool "Kernel low-level debugging messages via Rockchip RK3X UART0" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK3X_UART1 bool "Kernel low-level debugging messages via Rockchip RK3X UART1" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK3X_UART2 bool "Kernel low-level debugging messages via Rockchip RK3X UART2" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_RK3X_UART3 bool "Kernel low-level debugging messages via Rockchip RK3X UART3" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 0. The port must have been initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 1. The port must have been initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 2. The port must have been initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS select DEBUG_EXYNOS_UART bool "Use S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 3. The port must have been initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. config DEBUG_SUNXI_UART0 bool "Kernel low-level debugging messages via sunXi UART0" depends on ARCH_SUNXI select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART0. config DEBUG_SUNXI_UART1 bool "Kernel low-level debugging messages via sunXi UART1" depends on ARCH_SUNXI select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Automatically determines which UART to use for low-level debug based on the ODMDATA value. This value is part of the BCT, and is written to the boot memory device using nvflash, or other flashing tool. When bits 19:18 are 3, then bits 17:15 indicate which UART to use; 0/1/2/3/4 are UART A/B/C/D/E. config TEGRA_DEBUG_UARTA bool "Kernel low-level debugging messages via Tegra UART A" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. config TEGRA_DEBUG_UARTB bool "Kernel low-level debugging messages via Tegra UART B" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. config TEGRA_DEBUG_UARTC bool "Kernel low-level debugging messages via Tegra UART C" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. config TEGRA_DEBUG_UARTD bool "Kernel low-level debugging messages via Tegra UART D" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. config TEGRA_DEBUG_UARTE bool "Kernel low-level debugging messages via Tegra UART E" depends on ARCH_TEGRA select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. config DEBUG_SIRFPRIMA2_UART1 bool "Kernel low-level debugging messages via SiRFprimaII UART1" depends on ARCH_PRIMA2 help Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFprimaII devices. config DEBUG_SIRFMARCO_UART1 bool "Kernel low-level debugging messages via SiRFmarco UART1" depends on ARCH_MARCO help Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. config STIH41X_DEBUG_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" depends on ARCH_STI select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2000, which has default UART wired up to ASC2. If unsure, say N. config STIH41X_DEBUG_SBC_ASC1 bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2020. which has default UART wired up to SBC ASC1. If unsure, say N. config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the uart port on U300 devices. config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" help Say Y here if you want kernel low-level debugging support on Ux500 based platforms. config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU help This option enables a simple heuristic which tries to determine the motherboard's memory map variant (original or RS1) and then choose the relevant UART0 base address. Note that this will only work with standard A-class core tiles, and may fail with non-standard SMM or custom software models. config DEBUG_VEXPRESS_UART0_CA9 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" depends on ARCH_VEXPRESS select DEBUG_UART_PL01X help This option selects UART0 at 0x10009000. Except for custom models, this applies only to the V2P-CA9 tile. config DEBUG_VEXPRESS_UART0_RS1 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" depends on ARCH_VEXPRESS select DEBUG_UART_PL01X help This option selects UART0 at 0x1c090000. This applies to most of the tiles using the RS1 memory map, including all new A-class core tiles, FPGA-based SMMs and software models. config DEBUG_VEXPRESS_UART0_CRX bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" depends on ARCH_VEXPRESS && !MMU select DEBUG_UART_PL01X help This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 config DEBUG_VT8500_UART0 bool "Use UART0 on VIA/Wondermedia SoCs" depends on ARCH_VT8500 help This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM help Say Y here if your platform doesn't provide a UART option above. This relies on your platform choosing the right UART definition internally in order for low-level debugging to work. config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct their output to the EmbeddedICE macrocell's DCC channel using co-processor 14. This is known to work on the ARM9 style ICE channel and on the XScale with the PEEDI. Note that the system will appear to hang during boot if there is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help Say Y here if you wish the debug print routes to direct their output to an 8250 UART. You can use this option to provide the parameters for the 8250 UART rather than selecting one of the platform specific options above if you know the parameters for the port. This option is preferred over the platform specific options; the platform specific options are deprecated and will be soon removed. config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help Say Y here if you wish the debug print routes to direct their output to a PL01x Primecell UART. You can use this option to provide the parameters for the UART rather than selecting one of the platform specific options above if you know the parameters for the port. This option is preferred over the platform specific options; the platform specific options are deprecated and will be soon removed. endchoice config DEBUG_EXYNOS_UART bool config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ DEBUG_IMX21_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART default 1 depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA config DEBUG_STI_UART bool depends on ARCH_STI config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ DEBUG_IMX21_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" # Compatibility options for PL01x config DEBUG_UART_PL01X def_bool ARCH_EP93XX || \ ARCH_INTEGRATOR || \ ARCH_VERSATILE # Compatibility options for 8250 config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT default 0x10124000 if DEBUG_RK3X_UART0 default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART default 0x16000000 if ARCH_INTEGRATOR default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI default 0x7c0003f8 if FOOTBRIDGE default 0x80230000 if DEBUG_PICOXCELL_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0012000 if DEBUG_MVEBU_UART default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd012000 if ARCH_MV78XX0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0xfed12000 if ARCH_KIRKWOOD default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xfee36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 default 0 if FOOTBRIDGE || ARCH_IOP32X default 2 config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC config DEBUG_UNCOMPRESS bool depends on ARCH_MULTIPLATFORM default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ !DEBUG_TEGRA_UART help This option influences the normal decompressor output for multiplatform kernels. Normally, multiplatform kernels disable decompressor output because it is not possible to know where to send the decompressor output. When this option is set, the selected DEBUG_LL output method will be re-used for normal decompressor output on multiplatform kernels. config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM default "mach/uncompress.h" config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL help Say Y here if you want to have an early console using the kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. config OC_ETM bool "On-chip ETM and ETB" depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. config ARM_KPROBES_TEST tristate "Kprobes test module" depends on KPROBES && MODULES help Perform tests of kprobes API and instruction set simulation. config PID_IN_CONTEXTIDR bool "Write the current PID to the CONTEXTIDR register" depends on CPU_COPY_V6 help Enabling this option causes the kernel to write the current PID to the PROCID field of the CONTEXTIDR register, at the expense of some additional instructions during context switch. Say Y here only if you are planning to use hardware trace tools with this kernel. endmenu