# arch/arm/mach-s3c24xx/Kconfig # # Copyright (c) 2012 Samsung Electronics Co., Ltd. # http://www.samsung.com/ # # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 if ARCH_S3C24XX config PLAT_S3C24XX def_bool y select ARCH_REQUIRE_GPIOLIB select NO_IOPORT_MAP select S3C_DEV_NAND select IRQ_DOMAIN help Base platform code for any Samsung S3C24XX device menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T select S3C2410_COMMON_CLK select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T select S3C2412_COMMON_CLK select S3C2412_PM if PM help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" select CPU_ARM926T select S3C2416_PM if PM select S3C2443_COMMON_CLK help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM help Support for S3C2440 Samsung Mobile CPU based systems. config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. config CPU_S3C244X def_bool y depends on CPU_S3C2440 || CPU_S3C2442 config CPU_S3C2443 bool "SAMSUNG S3C2443" select CPU_ARM920T select S3C2443_COMMON_CLK help Support for the S3C2443 SoC from the S3C24XX line # common code config S3C24XX_SMDK bool help Common machine code for SMDK2410 and SMDK2440 config S3C24XX_SIMTEC_AUDIO bool depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) default y help Add audio devices for common Simtec S3C24XX boards config S3C24XX_SIMTEC_PM bool help Common power management code for systems that are compatible with the Simtec style of power management config S3C24XX_SIMTEC_USB bool help USB management code for common Simtec S3C24XX boards config S3C24XX_SETUP_TS bool help Compile in platform device definition for Samsung TouchScreen. config S3C2410_PM bool help Power Management code common to S3C2410 and better config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" depends on ARM_S3C24XX_CPUFREQ help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle after a frequency change, so by default it is not enabled. This also means that the PLL tables for the selected CPU(s) will be built which may increase the size of the kernel image. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 config S3C2410_IOTIMING bool depends on ARM_S3C24XX_CPUFREQ help Internal node to select io timing code that is common to the s3c2410 and s3c2440/s3c2442 cpu frequency support. config S3C2410_CPUFREQ_UTILS bool depends on ARM_S3C24XX_CPUFREQ help Internal node to select timing code that is common to the s3c2410 and s3c2440/s3c244 cpu frequency support. # cpu frequency support common to s3c2412, s3c2413 and s3c2442 config S3C2412_IOTIMING bool depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) help Intel node to select io timing code that is common to the s3c2412 and the s3c2443. # cpu-specific sections if CPU_S3C2410 config S3C2410_PLL bool depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL default y help Select the PLL table for the S3C2410 config S3C24XX_SIMTEC_NOR bool help Internal node to specify machine has simtec NOR mapping config MACH_BAST_IDE bool select HAVE_PATA_PLATFORM help Internal node for machines with an BAST style IDE interface comment "S3C2410 Boards" # # The "S3C2410 Boards" list is ordered alphabetically by option text. # (without ARCH_ or MACH_) # config MACH_AML_M5900 bool "AML M5900 Series" select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help Say Y here if you are using the American Microsystems M5900 Series config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB select S3C_DEV_HWMON select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) config BAST_PC104_IRQ bool "BAST PC104 IRQ support" depends on ARCH_BAST default y help Say Y here to enable the PC104 IRQ routing on the Simtec BAST (EB2410ITX) config ARCH_H1940 bool "IPAQ H1940" select PM_H1940 if PM select S3C24XX_SETUP_TS select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the HP IPAQ H1940 config H1940BT tristate "Control the state of H1940 bluetooth chip" depends on ARCH_H1940 select RFKILL help This is a simple driver that is able to control the state of built in bluetooth chip on h1940. config PM_H1940 bool help Internal node for H1940 and related PM config MACH_N30 bool "Acer N30 family" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. config MACH_OTOM bool "NexVision OTOM Board" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision OTOM board config MACH_QT2410 bool "QT2410" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Armzone QT2410 config ARCH_SMDK2410 bool "SMDK2410/A9M2410" select S3C24XX_SMDK select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2410 or the derived module A9M2410 config MACH_TCT_HAMMER bool "TCT Hammer Board" select S3C_DEV_USB_HOST help Say Y here if you are using the TinCanTools Hammer Board config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB select S3C_DEV_USB_HOST help Say Y here if you are using the Thorcom VR1000 board. endif # CPU_S3C2410 config S3C2412_PM_SLEEP bool help Internal config node to apply sleep for S3C2412 power management. Can be selected by another SoCs such as S3C2416 with similar sleep procedure. if CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ !CPU_S3C2442 && !CPU_S3C2443 default y config S3C2412_PM bool select S3C2412_PM_SLEEP select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management comment "S3C2412 Boards" # # The "S3C2412 Boards" list is ordered alphabetically by option text. # (without ARCH_ or MACH_) # config MACH_JIVE bool "Logitech Jive" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Logitech Jive. config MACH_JIVE_SHOW_BOOTLOADER bool "Allow access to bootloader partitions in MTD" depends on MACH_JIVE config MACH_S3C2413 bool help Internal node for S3C2413 version of SMDK2413, so that machine_is_s3c2413() will work when MACH_SMDK2413 is selected config MACH_SMDK2412 bool "SMDK2412" select MACH_SMDK2413 help Say Y here if you are using an SMDK2412 Note, this shares support with SMDK2413, so will automatically select MACH_SMDK2413. config MACH_SMDK2413 bool "SMDK2413" select MACH_S3C2413 select S3C24XX_SMDK select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using an SMDK2413 config MACH_VSTMS bool "VMSTMS" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using an VSTMS board endif # CPU_S3C2412 if CPU_S3C2416 config S3C2416_PM bool select S3C2412_PM_SLEEP select SAMSUNG_WAKEMASK help Internal config node to apply S3C2416 power management config S3C2416_SETUP_SDHCI bool select S3C2416_SETUP_SDHCI_GPIO help Internal helper functions for S3C2416 based SDHCI systems config S3C2416_SETUP_SDHCI_GPIO bool help Common setup code for SDHCI gpio. comment "S3C2416 Boards" config MACH_SMDK2416 bool "SMDK2416" select S3C2416_SETUP_SDHCI select S3C24XX_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using an SMDK2416 config MACH_S3C2416_DT bool "Samsung S3C2416 machine using devicetree" select CLKSRC_OF select USE_OF select PINCTRL select PINCTRL_S3C24XX help Machine support for Samsung S3C2416 machines with device tree enabled. Select this if a fdt blob is available for the S3C2416 SoC based board. Note: This is under development and not all peripherals can be supported with this machine file. endif # CPU_S3C2416 if CPU_S3C2440 config S3C2440_XTAL_12000000 bool help Indicate that the build needs to support 12MHz system crystal. config S3C2440_XTAL_16934400 bool help Indicate that the build needs to support 16.9344MHz system crystal. config S3C2440_PLL_12000000 bool depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. comment "S3C2440 Boards" # # The "S3C2440 Boards" list is ordered alphabetically by option text. # (without ARCH_ or MACH_) # config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS development system config MACH_AT2440EVB bool "Avantech AT2440EVB development board" select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the AT2440EVB development board config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT select NEW_LEDS select S3C_DEV_NAND select S3C_DEV_USB_HOST select S3C_SETUP_CAMIF help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select S3C2440_XTAL_12000000 select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. config MACH_OSIRIS_DVS tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" depends on MACH_OSIRIS depends on TPS65010 help Say Y/M here if you want to have dynamic voltage scaling support on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. The DVS driver alters the voltage supplied to the ARM core depending on the frequency it is running at. The driver itself does not do any of the frequency alteration, which is left up to the cpufreq driver. config MACH_RX3715 bool "HP iPAQ rx3715" select PM_H1940 if PM select S3C2440_XTAL_16934400 select S3C_DEV_NAND help Say Y here if you are using the HP iPAQ rx3715. config ARCH_S3C2440 bool "SMDK2440" select S3C2440_XTAL_16934400 select S3C24XX_SMDK select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2440. config SMDK2440_CPU2440 bool "SMDK2440 with S3C2440 CPU module" default y if ARCH_S3C2440 select S3C2440_XTAL_16934400 endif # CPU_S3C2440 if CPU_S3C2442 comment "S3C2442 Boards" # # The "S3C2442 Boards" list is ordered alphabetically by option text. # (without ARCH_ or MACH_) # config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select I2C select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 select S3C24XX_PWM select S3C_DEV_NAND help Say Y here if you're using HP iPAQ rx1950 endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 config S3C2443_SETUP_SPI bool help Common setup code for SPI GPIO configurations endif # CPU_S3C2443 || CPU_S3C2416 if CPU_S3C2443 comment "S3C2443 Boards" config MACH_SMDK2443 bool "SMDK2443" select S3C24XX_SMDK select S3C_DEV_HSMMC1 help Say Y here if you are using an SMDK2443 endif # CPU_S3C2443 endmenu # SAMSUNG S3C24XX SoCs Support endif # ARCH_S3C24XX