87 строки
3.7 KiB
ReStructuredText
87 строки
3.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
==================================
|
|
NVDIMM Runtime Firmware Activation
|
|
==================================
|
|
|
|
Some persistent memory devices run a firmware locally on the device /
|
|
"DIMM" to perform tasks like media management, capacity provisioning,
|
|
and health monitoring. The process of updating that firmware typically
|
|
involves a reboot because it has implications for in-flight memory
|
|
transactions. However, reboots are disruptive and at least the Intel
|
|
persistent memory platform implementation, described by the Intel ACPI
|
|
DSM specification [1], has added support for activating firmware at
|
|
runtime.
|
|
|
|
A native sysfs interface is implemented in libnvdimm to allow platform
|
|
to advertise and control their local runtime firmware activation
|
|
capability.
|
|
|
|
The libnvdimm bus object, ndbusX, implements an ndbusX/firmware/activate
|
|
attribute that shows the state of the firmware activation as one of 'idle',
|
|
'armed', 'overflow', and 'busy'.
|
|
|
|
- idle:
|
|
No devices are set / armed to activate firmware
|
|
|
|
- armed:
|
|
At least one device is armed
|
|
|
|
- busy:
|
|
In the busy state armed devices are in the process of transitioning
|
|
back to idle and completing an activation cycle.
|
|
|
|
- overflow:
|
|
If the platform has a concept of incremental work needed to perform
|
|
the activation it could be the case that too many DIMMs are armed for
|
|
activation. In that scenario the potential for firmware activation to
|
|
timeout is indicated by the 'overflow' state.
|
|
|
|
The 'ndbusX/firmware/activate' property can be written with a value of
|
|
either 'live', or 'quiesce'. A value of 'quiesce' triggers the kernel to
|
|
run firmware activation from within the equivalent of the hibernation
|
|
'freeze' state where drivers and applications are notified to stop their
|
|
modifications of system memory. A value of 'live' attempts
|
|
firmware activation without this hibernation cycle. The
|
|
'ndbusX/firmware/activate' property will be elided completely if no
|
|
firmware activation capability is detected.
|
|
|
|
Another property 'ndbusX/firmware/capability' indicates a value of
|
|
'live' or 'quiesce', where 'live' indicates that the firmware
|
|
does not require or inflict any quiesce period on the system to update
|
|
firmware. A capability value of 'quiesce' indicates that firmware does
|
|
expect and injects a quiet period for the memory controller, but 'live'
|
|
may still be written to 'ndbusX/firmware/activate' as an override to
|
|
assume the risk of racing firmware update with in-flight device and
|
|
application activity. The 'ndbusX/firmware/capability' property will be
|
|
elided completely if no firmware activation capability is detected.
|
|
|
|
The libnvdimm memory-device / DIMM object, nmemX, implements
|
|
'nmemX/firmware/activate' and 'nmemX/firmware/result' attributes to
|
|
communicate the per-device firmware activation state. Similar to the
|
|
'ndbusX/firmware/activate' attribute, the 'nmemX/firmware/activate'
|
|
attribute indicates 'idle', 'armed', or 'busy'. The state transitions
|
|
from 'armed' to 'idle' when the system is prepared to activate firmware,
|
|
firmware staged + state set to armed, and 'ndbusX/firmware/activate' is
|
|
triggered. After that activation event the nmemX/firmware/result
|
|
attribute reflects the state of the last activation as one of:
|
|
|
|
- none:
|
|
No runtime activation triggered since the last time the device was reset
|
|
|
|
- success:
|
|
The last runtime activation completed successfully.
|
|
|
|
- fail:
|
|
The last runtime activation failed for device-specific reasons.
|
|
|
|
- not_staged:
|
|
The last runtime activation failed due to a sequencing error of the
|
|
firmware image not being staged.
|
|
|
|
- need_reset:
|
|
Runtime firmware activation failed, but the firmware can still be
|
|
activated via the legacy method of power-cycling the system.
|
|
|
|
[1]: https://docs.pmem.io/persistent-memory/
|