129 строки
3.3 KiB
ReStructuredText
129 строки
3.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver max16601
|
|
======================
|
|
|
|
Supported chips:
|
|
|
|
* Maxim MAX16508
|
|
|
|
Prefix: 'max16508'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: Not published
|
|
|
|
* Maxim MAX16601
|
|
|
|
Prefix: 'max16601'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: Not published
|
|
|
|
Author: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver supports the MAX16508 VR13 Dual-Output Voltage Regulator
|
|
as well as the MAX16601 VR13.HC Dual-Output Voltage Regulator chipsets.
|
|
|
|
The driver is a client driver to the core PMBus driver.
|
|
Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate the
|
|
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
|
|
details.
|
|
|
|
|
|
Platform data support
|
|
---------------------
|
|
|
|
The driver supports standard PMBus driver platform data.
|
|
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
The following attributes are supported.
|
|
|
|
=============================== ===============================================
|
|
in1_label "vin1"
|
|
in1_input VCORE input voltage.
|
|
in1_alarm Input voltage alarm.
|
|
|
|
in2_label "vout1"
|
|
in2_input VCORE output voltage.
|
|
in2_alarm Output voltage alarm.
|
|
|
|
curr1_label "iin1"
|
|
curr1_input VCORE input current, derived from duty cycle
|
|
and output current.
|
|
curr1_max Maximum input current.
|
|
curr1_max_alarm Current high alarm.
|
|
|
|
curr[P+2]_label "iin1.P"
|
|
curr[P+2]_input VCORE phase P input current.
|
|
|
|
curr[N+2]_label "iin2"
|
|
curr[N+2]_input VCORE input current, derived from sensor
|
|
element.
|
|
'N' is the number of enabled/populated phases.
|
|
|
|
curr[N+3]_label "iin3"
|
|
curr[N+3]_input VSA input current.
|
|
|
|
curr[N+4]_label "iout1"
|
|
curr[N+4]_input VCORE output current.
|
|
curr[N+4]_crit Critical output current.
|
|
curr[N+4]_crit_alarm Output current critical alarm.
|
|
curr[N+4]_max Maximum output current.
|
|
curr[N+4]_max_alarm Output current high alarm.
|
|
|
|
curr[N+P+5]_label "iout1.P"
|
|
curr[N+P+5]_input VCORE phase P output current.
|
|
|
|
curr[2*N+5]_label "iout3"
|
|
curr[2*N+5]_input VSA output current.
|
|
curr[2*N+5]_highest Historical maximum VSA output current.
|
|
curr[2*N+5]_reset_history Write any value to reset curr21_highest.
|
|
curr[2*N+5]_crit Critical output current.
|
|
curr[2*N+5]_crit_alarm Output current critical alarm.
|
|
curr[2*N+5]_max Maximum output current.
|
|
curr[2*N+5]_max_alarm Output current high alarm.
|
|
|
|
power1_label "pin1"
|
|
power1_input Input power, derived from duty cycle and output
|
|
current.
|
|
power1_alarm Input power alarm.
|
|
|
|
power2_label "pin2"
|
|
power2_input Input power, derived from input current sensor.
|
|
|
|
power3_label "pout"
|
|
power3_input Output power.
|
|
|
|
temp1_input VCORE temperature.
|
|
temp1_crit Critical high temperature.
|
|
temp1_crit_alarm Chip temperature critical high alarm.
|
|
temp1_max Maximum temperature.
|
|
temp1_max_alarm Chip temperature high alarm.
|
|
|
|
temp2_input TSENSE_0 temperature
|
|
temp3_input TSENSE_1 temperature
|
|
temp4_input TSENSE_2 temperature
|
|
temp5_input TSENSE_3 temperature
|
|
|
|
temp6_input VSA temperature.
|
|
temp6_crit Critical high temperature.
|
|
temp6_crit_alarm Chip temperature critical high alarm.
|
|
temp6_max Maximum temperature.
|
|
temp6_max_alarm Chip temperature high alarm.
|
|
=============================== ===============================================
|