396 строки
16 KiB
ReStructuredText
396 строки
16 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
===============
|
|
Linux I2C Sysfs
|
|
===============
|
|
|
|
Overview
|
|
========
|
|
|
|
I2C topology can be complex because of the existence of I2C MUX
|
|
(I2C Multiplexer). The Linux
|
|
kernel abstracts the MUX channels into logical I2C bus numbers. However, there
|
|
is a gap of knowledge to map from the I2C bus physical number and MUX topology
|
|
to logical I2C bus number. This doc is aimed to fill in this gap, so the
|
|
audience (hardware engineers and new software developers for example) can learn
|
|
the concept of logical I2C buses in the kernel, by knowing the physical I2C
|
|
topology and navigating through the I2C sysfs in Linux shell. This knowledge is
|
|
useful and essential to use ``i2c-tools`` for the purpose of development and
|
|
debugging.
|
|
|
|
Target audience
|
|
---------------
|
|
|
|
People who need to use Linux shell to interact with I2C subsystem on a system
|
|
which the Linux is running on.
|
|
|
|
Prerequisites
|
|
-------------
|
|
|
|
1. Knowledge of general Linux shell file system commands and operations.
|
|
|
|
2. General knowledge of I2C, I2C MUX and I2C topology.
|
|
|
|
Location of I2C Sysfs
|
|
=====================
|
|
|
|
Typically, the Linux Sysfs filesystem is mounted at the ``/sys`` directory,
|
|
so you can find the I2C Sysfs under ``/sys/bus/i2c/devices``
|
|
where you can directly ``cd`` to it.
|
|
There is a list of symbolic links under that directory. The links that
|
|
start with ``i2c-`` are I2C buses, which may be either physical or logical. The
|
|
other links that begin with numbers and end with numbers are I2C devices, where
|
|
the first number is I2C bus number, and the second number is I2C address.
|
|
|
|
Google Pixel 3 phone for example::
|
|
|
|
blueline:/sys/bus/i2c/devices $ ls
|
|
0-0008 0-0061 1-0028 3-0043 4-0036 4-0041 i2c-1 i2c-3
|
|
0-000c 0-0066 2-0049 4-000b 4-0040 i2c-0 i2c-2 i2c-4
|
|
|
|
``i2c-2`` is an I2C bus whose number is 2, and ``2-0049`` is an I2C device
|
|
on bus 2 address 0x49 bound with a kernel driver.
|
|
|
|
Terminologies
|
|
=============
|
|
|
|
First, let us define a couple of terminologies to avoid confusions in the later
|
|
sections.
|
|
|
|
(Physical) I2C Bus Controller
|
|
-----------------------------
|
|
|
|
The hardware system that the Linux kernel is running on may have multiple
|
|
physical I2C bus controllers. The controllers are hardware and physical, and the
|
|
system may define multiple registers in the memory space to manipulate the
|
|
controllers. Linux kernel has I2C bus drivers under source directory
|
|
``drivers/i2c/busses`` to translate kernel I2C API into register
|
|
operations for different systems. This terminology is not limited to Linux
|
|
kernel only.
|
|
|
|
I2C Bus Physical Number
|
|
-----------------------
|
|
|
|
For each physical I2C bus controller, the system vendor may assign a physical
|
|
number to each controller. For example, the first I2C bus controller which has
|
|
the lowest register addresses may be called ``I2C-0``.
|
|
|
|
Logical I2C Bus
|
|
---------------
|
|
|
|
Every I2C bus number you see in Linux I2C Sysfs is a logical I2C bus with a
|
|
number assigned. This is similar to the fact that software code is usually
|
|
written upon virtual memory space, instead of physical memory space.
|
|
|
|
Each logical I2C bus may be an abstraction of a physical I2C bus controller, or
|
|
an abstraction of a channel behind an I2C MUX. In case it is an abstraction of a
|
|
MUX channel, whenever we access an I2C device via a such logical bus, the kernel
|
|
will switch the I2C MUX for you to the proper channel as part of the
|
|
abstraction.
|
|
|
|
Physical I2C Bus
|
|
----------------
|
|
|
|
If the logical I2C bus is a direct abstraction of a physical I2C bus controller,
|
|
let us call it a physical I2C bus.
|
|
|
|
Caveat
|
|
------
|
|
|
|
This may be a confusing part for people who only know about the physical I2C
|
|
design of a board. It is actually possible to rename the I2C bus physical number
|
|
to a different number in logical I2C bus level in Device Tree Source (DTS) under
|
|
section ``aliases``. See
|
|
`arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
|
|
<../../arch/arm/boot/dts/nuvoton-npcm730-gsj.dts>`_
|
|
for an example of DTS file.
|
|
|
|
Best Practice: **(To kernel software developers)** It is better to keep the I2C
|
|
bus physical number the same as their corresponding logical I2C bus number,
|
|
instead of renaming or mapping them, so that it may be less confusing to other
|
|
users. These physical I2C buses can be served as good starting points for I2C
|
|
MUX fanouts. For the following examples, we will assume that the physical I2C
|
|
bus has a number same as their I2C bus physical number.
|
|
|
|
Walk through Logical I2C Bus
|
|
============================
|
|
|
|
For the following content, we will use a more complex I2C topology as an
|
|
example. Here is a brief graph for the I2C topology. If you do not understand
|
|
this graph at the first glance, do not be afraid to continue reading this doc
|
|
and review it when you finish reading.
|
|
|
|
::
|
|
|
|
i2c-7 (physical I2C bus controller 7)
|
|
`-- 7-0071 (4-channel I2C MUX at 0x71)
|
|
|-- i2c-60 (channel-0)
|
|
|-- i2c-73 (channel-1)
|
|
| |-- 73-0040 (I2C sensor device with hwmon directory)
|
|
| |-- 73-0070 (I2C MUX at 0x70, exists in DTS, but failed to probe)
|
|
| `-- 73-0072 (8-channel I2C MUX at 0x72)
|
|
| |-- i2c-78 (channel-0)
|
|
| |-- ... (channel-1...6, i2c-79...i2c-84)
|
|
| `-- i2c-85 (channel-7)
|
|
|-- i2c-86 (channel-2)
|
|
`-- i2c-203 (channel-3)
|
|
|
|
Distinguish Physical and Logical I2C Bus
|
|
----------------------------------------
|
|
|
|
One simple way to distinguish between a physical I2C bus and a logical I2C bus,
|
|
is to read the symbolic link ``device`` under the I2C bus directory by using
|
|
command ``ls -l`` or ``readlink``.
|
|
|
|
An alternative symbolic link to check is ``mux_device``. This link only exists
|
|
in logical I2C bus directory which is fanned out from another I2C bus.
|
|
Reading this link will also tell you which I2C MUX device created
|
|
this logical I2C bus.
|
|
|
|
If the symbolic link points to a directory ending with ``.i2c``, it should be a
|
|
physical I2C bus, directly abstracting a physical I2C bus controller. For
|
|
example::
|
|
|
|
$ readlink /sys/bus/i2c/devices/i2c-7/device
|
|
../../f0087000.i2c
|
|
$ ls /sys/bus/i2c/devices/i2c-7/mux_device
|
|
ls: /sys/bus/i2c/devices/i2c-7/mux_device: No such file or directory
|
|
|
|
In this case, ``i2c-7`` is a physical I2C bus, so it does not have the symbolic
|
|
link ``mux_device`` under its directory. And if the kernel software developer
|
|
follows the common practice by not renaming physical I2C buses, this should also
|
|
mean the physical I2C bus controller 7 of the system.
|
|
|
|
On the other hand, if the symbolic link points to another I2C bus, the I2C bus
|
|
presented by the current directory has to be a logical bus. The I2C bus pointed
|
|
by the link is the parent bus which may be either a physical I2C bus or a
|
|
logical one. In this case, the I2C bus presented by the current directory
|
|
abstracts an I2C MUX channel under the parent bus.
|
|
|
|
For example::
|
|
|
|
$ readlink /sys/bus/i2c/devices/i2c-73/device
|
|
../../i2c-7
|
|
$ readlink /sys/bus/i2c/devices/i2c-73/mux_device
|
|
../7-0071
|
|
|
|
``i2c-73`` is a logical bus fanout by an I2C MUX under ``i2c-7``
|
|
whose I2C address is 0x71.
|
|
Whenever we access an I2C device with bus 73, the kernel will always
|
|
switch the I2C MUX addressed 0x71 to the proper channel for you as part of the
|
|
abstraction.
|
|
|
|
Finding out Logical I2C Bus Number
|
|
----------------------------------
|
|
|
|
In this section, we will describe how to find out the logical I2C bus number
|
|
representing certain I2C MUX channels based on the knowledge of physical
|
|
hardware I2C topology.
|
|
|
|
In this example, we have a system which has a physical I2C bus 7 and not renamed
|
|
in DTS. There is a 4-channel MUX at address 0x71 on that bus. There is another
|
|
8-channel MUX at address 0x72 behind the channel 1 of the 0x71 MUX. Let us
|
|
navigate through Sysfs and find out the logical I2C bus number of the channel 3
|
|
of the 0x72 MUX.
|
|
|
|
First of all, let us go to the directory of ``i2c-7``::
|
|
|
|
~$ cd /sys/bus/i2c/devices/i2c-7
|
|
/sys/bus/i2c/devices/i2c-7$ ls
|
|
7-0071 i2c-60 name subsystem
|
|
delete_device i2c-73 new_device uevent
|
|
device i2c-86 of_node
|
|
i2c-203 i2c-dev power
|
|
|
|
There, we see the 0x71 MUX as ``7-0071``. Go inside it::
|
|
|
|
/sys/bus/i2c/devices/i2c-7$ cd 7-0071/
|
|
/sys/bus/i2c/devices/i2c-7/7-0071$ ls -l
|
|
channel-0 channel-3 modalias power
|
|
channel-1 driver name subsystem
|
|
channel-2 idle_state of_node uevent
|
|
|
|
Read the link ``channel-1`` using ``readlink`` or ``ls -l``::
|
|
|
|
/sys/bus/i2c/devices/i2c-7/7-0071$ readlink channel-1
|
|
../i2c-73
|
|
|
|
We find out that the channel 1 of 0x71 MUX on ``i2c-7`` is assigned
|
|
with a logical I2C bus number of 73.
|
|
Let us continue the journey to directory ``i2c-73`` in either ways::
|
|
|
|
# cd to i2c-73 under I2C Sysfs root
|
|
/sys/bus/i2c/devices/i2c-7/7-0071$ cd /sys/bus/i2c/devices/i2c-73
|
|
/sys/bus/i2c/devices/i2c-73$
|
|
|
|
# cd the channel symbolic link
|
|
/sys/bus/i2c/devices/i2c-7/7-0071$ cd channel-1
|
|
/sys/bus/i2c/devices/i2c-7/7-0071/channel-1$
|
|
|
|
# cd the link content
|
|
/sys/bus/i2c/devices/i2c-7/7-0071$ cd ../i2c-73
|
|
/sys/bus/i2c/devices/i2c-7/i2c-73$
|
|
|
|
Either ways, you will end up in the directory of ``i2c-73``. Similar to above,
|
|
we can now find the 0x72 MUX and what logical I2C bus numbers
|
|
that its channels are assigned::
|
|
|
|
/sys/bus/i2c/devices/i2c-73$ ls
|
|
73-0040 device i2c-83 new_device
|
|
73-004e i2c-78 i2c-84 of_node
|
|
73-0050 i2c-79 i2c-85 power
|
|
73-0070 i2c-80 i2c-dev subsystem
|
|
73-0072 i2c-81 mux_device uevent
|
|
delete_device i2c-82 name
|
|
/sys/bus/i2c/devices/i2c-73$ cd 73-0072
|
|
/sys/bus/i2c/devices/i2c-73/73-0072$ ls
|
|
channel-0 channel-4 driver of_node
|
|
channel-1 channel-5 idle_state power
|
|
channel-2 channel-6 modalias subsystem
|
|
channel-3 channel-7 name uevent
|
|
/sys/bus/i2c/devices/i2c-73/73-0072$ readlink channel-3
|
|
../i2c-81
|
|
|
|
There, we find out the logical I2C bus number of the channel 3 of the 0x72 MUX
|
|
is 81. We can later use this number to switch to its own I2C Sysfs directory or
|
|
issue ``i2c-tools`` commands.
|
|
|
|
Tip: Once you understand the I2C topology with MUX, command
|
|
`i2cdetect -l
|
|
<https://manpages.debian.org/unstable/i2c-tools/i2cdetect.8.en.html>`_
|
|
in
|
|
`I2C Tools
|
|
<https://i2c.wiki.kernel.org/index.php/I2C_Tools>`_
|
|
can give you
|
|
an overview of the I2C topology easily, if it is available on your system. For
|
|
example::
|
|
|
|
$ i2cdetect -l | grep -e '\-73' -e _7 | sort -V
|
|
i2c-7 i2c npcm_i2c_7 I2C adapter
|
|
i2c-73 i2c i2c-7-mux (chan_id 1) I2C adapter
|
|
i2c-78 i2c i2c-73-mux (chan_id 0) I2C adapter
|
|
i2c-79 i2c i2c-73-mux (chan_id 1) I2C adapter
|
|
i2c-80 i2c i2c-73-mux (chan_id 2) I2C adapter
|
|
i2c-81 i2c i2c-73-mux (chan_id 3) I2C adapter
|
|
i2c-82 i2c i2c-73-mux (chan_id 4) I2C adapter
|
|
i2c-83 i2c i2c-73-mux (chan_id 5) I2C adapter
|
|
i2c-84 i2c i2c-73-mux (chan_id 6) I2C adapter
|
|
i2c-85 i2c i2c-73-mux (chan_id 7) I2C adapter
|
|
|
|
Pinned Logical I2C Bus Number
|
|
-----------------------------
|
|
|
|
If not specified in DTS, when an I2C MUX driver is applied and the MUX device is
|
|
successfully probed, the kernel will assign the MUX channels with a logical bus
|
|
number based on the current biggest logical bus number incrementally. For
|
|
example, if the system has ``i2c-15`` as the highest logical bus number, and a
|
|
4-channel MUX is applied successfully, we will have ``i2c-16`` for the
|
|
MUX channel 0, and all the way to ``i2c-19`` for the MUX channel 3.
|
|
|
|
The kernel software developer is able to pin the fanout MUX channels to a static
|
|
logical I2C bus number in the DTS. This doc will not go through the details on
|
|
how to implement this in DTS, but we can see an example in:
|
|
`arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
|
|
<../../arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts>`_
|
|
|
|
In the above example, there is an 8-channel I2C MUX at address 0x70 on physical
|
|
I2C bus 2. The channel 2 of the MUX is defined as ``imux18`` in DTS,
|
|
and pinned to logical I2C bus number 18 with the line of ``i2c18 = &imux18;``
|
|
in section ``aliases``.
|
|
|
|
Take it further, it is possible to design a logical I2C bus number schema that
|
|
can be easily remembered by humans or calculated arithmetically. For example, we
|
|
can pin the fanout channels of a MUX on bus 3 to start at 30. So 30 will be the
|
|
logical bus number of the channel 0 of the MUX on bus 3, and 37 will be the
|
|
logical bus number of the channel 7 of the MUX on bus 3.
|
|
|
|
I2C Devices
|
|
===========
|
|
|
|
In previous sections, we mostly covered the I2C bus. In this section, let us see
|
|
what we can learn from the I2C device directory whose link name is in the format
|
|
of ``${bus}-${addr}``. The ``${bus}`` part in the name is a logical I2C bus
|
|
decimal number, while the ``${addr}`` part is a hex number of the I2C address
|
|
of each device.
|
|
|
|
I2C Device Directory Content
|
|
----------------------------
|
|
|
|
Inside each I2C device directory, there is a file named ``name``.
|
|
This file tells what device name it was used for the kernel driver to
|
|
probe this device. Use command ``cat`` to read its content. For example::
|
|
|
|
/sys/bus/i2c/devices/i2c-73$ cat 73-0040/name
|
|
ina230
|
|
/sys/bus/i2c/devices/i2c-73$ cat 73-0070/name
|
|
pca9546
|
|
/sys/bus/i2c/devices/i2c-73$ cat 73-0072/name
|
|
pca9547
|
|
|
|
There is a symbolic link named ``driver`` to tell what Linux kernel driver was
|
|
used to probe this device::
|
|
|
|
/sys/bus/i2c/devices/i2c-73$ readlink -f 73-0040/driver
|
|
/sys/bus/i2c/drivers/ina2xx
|
|
/sys/bus/i2c/devices/i2c-73$ readlink -f 73-0072/driver
|
|
/sys/bus/i2c/drivers/pca954x
|
|
|
|
But if the link ``driver`` does not exist at the first place,
|
|
it may mean that the kernel driver failed to probe this device due to
|
|
some errors. The error may be found in ``dmesg``::
|
|
|
|
/sys/bus/i2c/devices/i2c-73$ ls 73-0070/driver
|
|
ls: 73-0070/driver: No such file or directory
|
|
/sys/bus/i2c/devices/i2c-73$ dmesg | grep 73-0070
|
|
pca954x 73-0070: probe failed
|
|
pca954x 73-0070: probe failed
|
|
|
|
Depending on what the I2C device is and what kernel driver was used to probe the
|
|
device, we may have different content in the device directory.
|
|
|
|
I2C MUX Device
|
|
--------------
|
|
|
|
While you may be already aware of this in previous sections, an I2C MUX device
|
|
will have symbolic link ``channel-*`` inside its device directory.
|
|
These symbolic links point to their logical I2C bus directories::
|
|
|
|
/sys/bus/i2c/devices/i2c-73$ ls -l 73-0072/channel-*
|
|
lrwxrwxrwx ... 73-0072/channel-0 -> ../i2c-78
|
|
lrwxrwxrwx ... 73-0072/channel-1 -> ../i2c-79
|
|
lrwxrwxrwx ... 73-0072/channel-2 -> ../i2c-80
|
|
lrwxrwxrwx ... 73-0072/channel-3 -> ../i2c-81
|
|
lrwxrwxrwx ... 73-0072/channel-4 -> ../i2c-82
|
|
lrwxrwxrwx ... 73-0072/channel-5 -> ../i2c-83
|
|
lrwxrwxrwx ... 73-0072/channel-6 -> ../i2c-84
|
|
lrwxrwxrwx ... 73-0072/channel-7 -> ../i2c-85
|
|
|
|
I2C Sensor Device / Hwmon
|
|
-------------------------
|
|
|
|
I2C sensor device is also common to see. If they are bound by a kernel hwmon
|
|
(Hardware Monitoring) driver successfully, you will see a ``hwmon`` directory
|
|
inside the I2C device directory. Keep digging into it, you will find the Hwmon
|
|
Sysfs for the I2C sensor device::
|
|
|
|
/sys/bus/i2c/devices/i2c-73/73-0040/hwmon/hwmon17$ ls
|
|
curr1_input in0_lcrit_alarm name subsystem
|
|
device in1_crit power uevent
|
|
in0_crit in1_crit_alarm power1_crit update_interval
|
|
in0_crit_alarm in1_input power1_crit_alarm
|
|
in0_input in1_lcrit power1_input
|
|
in0_lcrit in1_lcrit_alarm shunt_resistor
|
|
|
|
For more info on the Hwmon Sysfs, refer to the doc:
|
|
|
|
`Naming and data format standards for sysfs files
|
|
<../hwmon/sysfs-interface.rst>`_
|
|
|
|
Instantiate I2C Devices in I2C Sysfs
|
|
------------------------------------
|
|
|
|
Refer to the doc:
|
|
|
|
`How to instantiate I2C devices, Method 4: Instantiate from user-space
|
|
<instantiating-devices.rst#method-4-instantiate-from-user-space>`_
|