427 строки
11 KiB
C
427 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Intel IXP4xx Expansion Bus Controller
|
|
* Copyright (C) 2021 Linaro Ltd.
|
|
*
|
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define IXP4XX_EXP_NUM_CS 8
|
|
|
|
#define IXP4XX_EXP_TIMING_CS0 0x00
|
|
#define IXP4XX_EXP_TIMING_CS1 0x04
|
|
#define IXP4XX_EXP_TIMING_CS2 0x08
|
|
#define IXP4XX_EXP_TIMING_CS3 0x0c
|
|
#define IXP4XX_EXP_TIMING_CS4 0x10
|
|
#define IXP4XX_EXP_TIMING_CS5 0x14
|
|
#define IXP4XX_EXP_TIMING_CS6 0x18
|
|
#define IXP4XX_EXP_TIMING_CS7 0x1c
|
|
|
|
/* Bits inside each CS timing register */
|
|
#define IXP4XX_EXP_TIMING_STRIDE 0x04
|
|
#define IXP4XX_EXP_CS_EN BIT(31)
|
|
#define IXP456_EXP_PAR_EN BIT(30) /* Only on IXP45x and IXP46x */
|
|
#define IXP4XX_EXP_T1_MASK GENMASK(29, 28)
|
|
#define IXP4XX_EXP_T1_SHIFT 28
|
|
#define IXP4XX_EXP_T2_MASK GENMASK(27, 26)
|
|
#define IXP4XX_EXP_T2_SHIFT 26
|
|
#define IXP4XX_EXP_T3_MASK GENMASK(25, 22)
|
|
#define IXP4XX_EXP_T3_SHIFT 22
|
|
#define IXP4XX_EXP_T4_MASK GENMASK(21, 20)
|
|
#define IXP4XX_EXP_T4_SHIFT 20
|
|
#define IXP4XX_EXP_T5_MASK GENMASK(19, 16)
|
|
#define IXP4XX_EXP_T5_SHIFT 16
|
|
#define IXP4XX_EXP_CYC_TYPE_MASK GENMASK(15, 14)
|
|
#define IXP4XX_EXP_CYC_TYPE_SHIFT 14
|
|
#define IXP4XX_EXP_SIZE_MASK GENMASK(13, 10)
|
|
#define IXP4XX_EXP_SIZE_SHIFT 10
|
|
#define IXP4XX_EXP_CNFG_0 BIT(9) /* Always zero */
|
|
#define IXP43X_EXP_SYNC_INTEL BIT(8) /* Only on IXP43x */
|
|
#define IXP43X_EXP_EXP_CHIP BIT(7) /* Only on IXP43x, dangerous to touch on IXP42x */
|
|
#define IXP4XX_EXP_BYTE_RD16 BIT(6)
|
|
#define IXP4XX_EXP_HRDY_POL BIT(5) /* Only on IXP42x */
|
|
#define IXP4XX_EXP_MUX_EN BIT(4)
|
|
#define IXP4XX_EXP_SPLT_EN BIT(3)
|
|
#define IXP4XX_EXP_WORD BIT(2) /* Always zero */
|
|
#define IXP4XX_EXP_WR_EN BIT(1)
|
|
#define IXP4XX_EXP_BYTE_EN BIT(0)
|
|
|
|
#define IXP4XX_EXP_CNFG0 0x20
|
|
#define IXP4XX_EXP_CNFG0_MEM_MAP BIT(31)
|
|
#define IXP4XX_EXP_CNFG1 0x24
|
|
|
|
#define IXP4XX_EXP_BOOT_BASE 0x00000000
|
|
#define IXP4XX_EXP_NORMAL_BASE 0x50000000
|
|
#define IXP4XX_EXP_STRIDE 0x01000000
|
|
|
|
/* Fuses on the IXP43x */
|
|
#define IXP43X_EXP_UNIT_FUSE_RESET 0x28
|
|
#define IXP43x_EXP_FUSE_SPEED_MASK GENMASK(23, 22)
|
|
|
|
/* Number of device tree values in "reg" */
|
|
#define IXP4XX_OF_REG_SIZE 3
|
|
|
|
struct ixp4xx_eb {
|
|
struct device *dev;
|
|
struct regmap *rmap;
|
|
u32 bus_base;
|
|
bool is_42x;
|
|
bool is_43x;
|
|
};
|
|
|
|
struct ixp4xx_exp_tim_prop {
|
|
const char *prop;
|
|
u32 max;
|
|
u32 mask;
|
|
u16 shift;
|
|
};
|
|
|
|
static const struct ixp4xx_exp_tim_prop ixp4xx_exp_tim_props[] = {
|
|
{
|
|
.prop = "intel,ixp4xx-eb-t1",
|
|
.max = 3,
|
|
.mask = IXP4XX_EXP_T1_MASK,
|
|
.shift = IXP4XX_EXP_T1_SHIFT,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-t2",
|
|
.max = 3,
|
|
.mask = IXP4XX_EXP_T2_MASK,
|
|
.shift = IXP4XX_EXP_T2_SHIFT,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-t3",
|
|
.max = 15,
|
|
.mask = IXP4XX_EXP_T3_MASK,
|
|
.shift = IXP4XX_EXP_T3_SHIFT,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-t4",
|
|
.max = 3,
|
|
.mask = IXP4XX_EXP_T4_MASK,
|
|
.shift = IXP4XX_EXP_T4_SHIFT,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-t5",
|
|
.max = 15,
|
|
.mask = IXP4XX_EXP_T5_MASK,
|
|
.shift = IXP4XX_EXP_T5_SHIFT,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-byte-access-on-halfword",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_BYTE_RD16,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-hpi-hrdy-pol-high",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_HRDY_POL,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-mux-address-and-data",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_MUX_EN,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-ahb-split-transfers",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_SPLT_EN,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-write-enable",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_WR_EN,
|
|
},
|
|
{
|
|
.prop = "intel,ixp4xx-eb-byte-access",
|
|
.max = 1,
|
|
.mask = IXP4XX_EXP_BYTE_EN,
|
|
},
|
|
};
|
|
|
|
static void ixp4xx_exp_setup_chipselect(struct ixp4xx_eb *eb,
|
|
struct device_node *np,
|
|
u32 cs_index,
|
|
u32 cs_size)
|
|
{
|
|
u32 cs_cfg;
|
|
u32 val;
|
|
u32 cur_cssize;
|
|
u32 cs_order;
|
|
int ret;
|
|
int i;
|
|
|
|
if (eb->is_42x && (cs_index > 7)) {
|
|
dev_err(eb->dev,
|
|
"invalid chipselect %u, we only support 0-7\n",
|
|
cs_index);
|
|
return;
|
|
}
|
|
if (eb->is_43x && (cs_index > 3)) {
|
|
dev_err(eb->dev,
|
|
"invalid chipselect %u, we only support 0-3\n",
|
|
cs_index);
|
|
return;
|
|
}
|
|
|
|
/* Several chip selects can be joined into one device */
|
|
if (cs_size > IXP4XX_EXP_STRIDE)
|
|
cur_cssize = IXP4XX_EXP_STRIDE;
|
|
else
|
|
cur_cssize = cs_size;
|
|
|
|
|
|
/*
|
|
* The following will read/modify/write the configuration for one
|
|
* chipselect, attempting to leave the boot defaults in place unless
|
|
* something is explicitly defined.
|
|
*/
|
|
regmap_read(eb->rmap, IXP4XX_EXP_TIMING_CS0 +
|
|
IXP4XX_EXP_TIMING_STRIDE * cs_index, &cs_cfg);
|
|
dev_info(eb->dev, "CS%d at %#08x, size %#08x, config before: %#08x\n",
|
|
cs_index, eb->bus_base + IXP4XX_EXP_STRIDE * cs_index,
|
|
cur_cssize, cs_cfg);
|
|
|
|
/* Size set-up first align to 2^9 .. 2^24 */
|
|
cur_cssize = roundup_pow_of_two(cur_cssize);
|
|
if (cur_cssize < 512)
|
|
cur_cssize = 512;
|
|
cs_order = ilog2(cur_cssize);
|
|
if (cs_order < 9 || cs_order > 24) {
|
|
dev_err(eb->dev, "illegal size order %d\n", cs_order);
|
|
return;
|
|
}
|
|
dev_dbg(eb->dev, "CS%d size order: %d\n", cs_index, cs_order);
|
|
cs_cfg &= ~(IXP4XX_EXP_SIZE_MASK);
|
|
cs_cfg |= ((cs_order - 9) << IXP4XX_EXP_SIZE_SHIFT);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ixp4xx_exp_tim_props); i++) {
|
|
const struct ixp4xx_exp_tim_prop *ip = &ixp4xx_exp_tim_props[i];
|
|
|
|
/* All are regular u32 values */
|
|
ret = of_property_read_u32(np, ip->prop, &val);
|
|
if (ret)
|
|
continue;
|
|
|
|
/* Handle bools (single bits) first */
|
|
if (ip->max == 1) {
|
|
if (val)
|
|
cs_cfg |= ip->mask;
|
|
else
|
|
cs_cfg &= ~ip->mask;
|
|
dev_info(eb->dev, "CS%d %s %s\n", cs_index,
|
|
val ? "enabled" : "disabled",
|
|
ip->prop);
|
|
continue;
|
|
}
|
|
|
|
if (val > ip->max) {
|
|
dev_err(eb->dev,
|
|
"CS%d too high value for %s: %u, capped at %u\n",
|
|
cs_index, ip->prop, val, ip->max);
|
|
val = ip->max;
|
|
}
|
|
/* This assumes max value fills all the assigned bits (and it does) */
|
|
cs_cfg &= ~ip->mask;
|
|
cs_cfg |= (val << ip->shift);
|
|
dev_info(eb->dev, "CS%d set %s to %u\n", cs_index, ip->prop, val);
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "intel,ixp4xx-eb-cycle-type", &val);
|
|
if (!ret) {
|
|
if (val > 3) {
|
|
dev_err(eb->dev, "illegal cycle type %d\n", val);
|
|
return;
|
|
}
|
|
dev_info(eb->dev, "CS%d set cycle type %d\n", cs_index, val);
|
|
cs_cfg &= ~IXP4XX_EXP_CYC_TYPE_MASK;
|
|
cs_cfg |= val << IXP4XX_EXP_CYC_TYPE_SHIFT;
|
|
}
|
|
|
|
if (eb->is_43x) {
|
|
/* Should always be zero */
|
|
cs_cfg &= ~IXP4XX_EXP_WORD;
|
|
/*
|
|
* This bit for Intel strata flash is currently unused, but let's
|
|
* report it if we find one.
|
|
*/
|
|
if (cs_cfg & IXP43X_EXP_SYNC_INTEL)
|
|
dev_info(eb->dev, "claims to be Intel strata flash\n");
|
|
}
|
|
cs_cfg |= IXP4XX_EXP_CS_EN;
|
|
|
|
regmap_write(eb->rmap,
|
|
IXP4XX_EXP_TIMING_CS0 + IXP4XX_EXP_TIMING_STRIDE * cs_index,
|
|
cs_cfg);
|
|
dev_info(eb->dev, "CS%d wrote %#08x into CS config\n", cs_index, cs_cfg);
|
|
|
|
/*
|
|
* If several chip selects are joined together into one big
|
|
* device area, we call ourselves recursively for each successive
|
|
* chip select. For a 32MB flash chip this results in two calls
|
|
* for example.
|
|
*/
|
|
if (cs_size > IXP4XX_EXP_STRIDE)
|
|
ixp4xx_exp_setup_chipselect(eb, np,
|
|
cs_index + 1,
|
|
cs_size - IXP4XX_EXP_STRIDE);
|
|
}
|
|
|
|
static void ixp4xx_exp_setup_child(struct ixp4xx_eb *eb,
|
|
struct device_node *np)
|
|
{
|
|
u32 cs_sizes[IXP4XX_EXP_NUM_CS];
|
|
int num_regs;
|
|
u32 csindex;
|
|
u32 cssize;
|
|
int ret;
|
|
int i;
|
|
|
|
num_regs = of_property_count_elems_of_size(np, "reg", IXP4XX_OF_REG_SIZE);
|
|
if (num_regs <= 0)
|
|
return;
|
|
dev_dbg(eb->dev, "child %s has %d register sets\n",
|
|
of_node_full_name(np), num_regs);
|
|
|
|
for (csindex = 0; csindex < IXP4XX_EXP_NUM_CS; csindex++)
|
|
cs_sizes[csindex] = 0;
|
|
|
|
for (i = 0; i < num_regs; i++) {
|
|
u32 rbase, rsize;
|
|
|
|
ret = of_property_read_u32_index(np, "reg",
|
|
i * IXP4XX_OF_REG_SIZE, &csindex);
|
|
if (ret)
|
|
break;
|
|
ret = of_property_read_u32_index(np, "reg",
|
|
i * IXP4XX_OF_REG_SIZE + 1, &rbase);
|
|
if (ret)
|
|
break;
|
|
ret = of_property_read_u32_index(np, "reg",
|
|
i * IXP4XX_OF_REG_SIZE + 2, &rsize);
|
|
if (ret)
|
|
break;
|
|
|
|
if (csindex >= IXP4XX_EXP_NUM_CS) {
|
|
dev_err(eb->dev, "illegal CS %d\n", csindex);
|
|
continue;
|
|
}
|
|
/*
|
|
* The memory window always starts from CS base so we need to add
|
|
* the start and size to get to the size from the start of the CS
|
|
* base. For example if CS0 is at 0x50000000 and the reg is
|
|
* <0 0xe40000 0x40000> the size is e80000.
|
|
*
|
|
* Roof this if we have several regs setting the same CS.
|
|
*/
|
|
cssize = rbase + rsize;
|
|
dev_dbg(eb->dev, "CS%d size %#08x\n", csindex, cssize);
|
|
if (cs_sizes[csindex] < cssize)
|
|
cs_sizes[csindex] = cssize;
|
|
}
|
|
|
|
for (csindex = 0; csindex < IXP4XX_EXP_NUM_CS; csindex++) {
|
|
cssize = cs_sizes[csindex];
|
|
if (!cssize)
|
|
continue;
|
|
/* Just this one, so set it up and return */
|
|
ixp4xx_exp_setup_chipselect(eb, np, csindex, cssize);
|
|
}
|
|
}
|
|
|
|
static int ixp4xx_exp_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct ixp4xx_eb *eb;
|
|
struct device_node *child;
|
|
bool have_children = false;
|
|
u32 val;
|
|
int ret;
|
|
|
|
eb = devm_kzalloc(dev, sizeof(*eb), GFP_KERNEL);
|
|
if (!eb)
|
|
return -ENOMEM;
|
|
|
|
eb->dev = dev;
|
|
eb->is_42x = of_device_is_compatible(np, "intel,ixp42x-expansion-bus-controller");
|
|
eb->is_43x = of_device_is_compatible(np, "intel,ixp43x-expansion-bus-controller");
|
|
|
|
eb->rmap = syscon_node_to_regmap(np);
|
|
if (IS_ERR(eb->rmap))
|
|
return dev_err_probe(dev, PTR_ERR(eb->rmap), "no regmap\n");
|
|
|
|
/* We check that the regmap work only on first read */
|
|
ret = regmap_read(eb->rmap, IXP4XX_EXP_CNFG0, &val);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "cannot read regmap\n");
|
|
if (val & IXP4XX_EXP_CNFG0_MEM_MAP)
|
|
eb->bus_base = IXP4XX_EXP_BOOT_BASE;
|
|
else
|
|
eb->bus_base = IXP4XX_EXP_NORMAL_BASE;
|
|
dev_info(dev, "expansion bus at %08x\n", eb->bus_base);
|
|
|
|
if (eb->is_43x) {
|
|
/* Check some fuses */
|
|
regmap_read(eb->rmap, IXP43X_EXP_UNIT_FUSE_RESET, &val);
|
|
switch (FIELD_GET(IXP43x_EXP_FUSE_SPEED_MASK, val)) {
|
|
case 0:
|
|
dev_info(dev, "IXP43x at 533 MHz\n");
|
|
break;
|
|
case 1:
|
|
dev_info(dev, "IXP43x at 400 MHz\n");
|
|
break;
|
|
case 2:
|
|
dev_info(dev, "IXP43x at 667 MHz\n");
|
|
break;
|
|
default:
|
|
dev_info(dev, "IXP43x unknown speed\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Walk over the child nodes and see what chipselects we use */
|
|
for_each_available_child_of_node(np, child) {
|
|
ixp4xx_exp_setup_child(eb, child);
|
|
/* We have at least one child */
|
|
have_children = true;
|
|
}
|
|
|
|
if (have_children)
|
|
return of_platform_default_populate(np, NULL, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ixp4xx_exp_of_match[] = {
|
|
{ .compatible = "intel,ixp42x-expansion-bus-controller", },
|
|
{ .compatible = "intel,ixp43x-expansion-bus-controller", },
|
|
{ .compatible = "intel,ixp45x-expansion-bus-controller", },
|
|
{ .compatible = "intel,ixp46x-expansion-bus-controller", },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver ixp4xx_exp_driver = {
|
|
.probe = ixp4xx_exp_probe,
|
|
.driver = {
|
|
.name = "intel-extbus",
|
|
.of_match_table = ixp4xx_exp_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(ixp4xx_exp_driver);
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
|
|
MODULE_DESCRIPTION("Intel IXP4xx external bus driver");
|
|
MODULE_LICENSE("GPL");
|