315 строки
8.2 KiB
C
315 строки
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor
|
|
* with Overtemperature Alarm
|
|
*
|
|
* Copyright (C) 2011 AppearTV AS
|
|
*
|
|
* Derived from:
|
|
*
|
|
* Based on the max1619 driver.
|
|
* Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
|
|
* Jean Delvare <jdelvare@suse.de>
|
|
*
|
|
* The MAX6642 is a sensor chip made by Maxim.
|
|
* It reports up to two temperatures (its own plus up to
|
|
* one external one). Complete datasheet can be
|
|
* obtained from Maxim's website at:
|
|
* http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
static const unsigned short normal_i2c[] = {
|
|
0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
/*
|
|
* The MAX6642 registers
|
|
*/
|
|
|
|
#define MAX6642_REG_R_MAN_ID 0xFE
|
|
#define MAX6642_REG_R_CONFIG 0x03
|
|
#define MAX6642_REG_W_CONFIG 0x09
|
|
#define MAX6642_REG_R_STATUS 0x02
|
|
#define MAX6642_REG_R_LOCAL_TEMP 0x00
|
|
#define MAX6642_REG_R_LOCAL_TEMPL 0x11
|
|
#define MAX6642_REG_R_LOCAL_HIGH 0x05
|
|
#define MAX6642_REG_W_LOCAL_HIGH 0x0B
|
|
#define MAX6642_REG_R_REMOTE_TEMP 0x01
|
|
#define MAX6642_REG_R_REMOTE_TEMPL 0x10
|
|
#define MAX6642_REG_R_REMOTE_HIGH 0x07
|
|
#define MAX6642_REG_W_REMOTE_HIGH 0x0D
|
|
|
|
/*
|
|
* Conversions
|
|
*/
|
|
|
|
static int temp_from_reg10(int val)
|
|
{
|
|
return val * 250;
|
|
}
|
|
|
|
static int temp_from_reg(int val)
|
|
{
|
|
return val * 1000;
|
|
}
|
|
|
|
static int temp_to_reg(int val)
|
|
{
|
|
return val / 1000;
|
|
}
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct max6642_data {
|
|
struct i2c_client *client;
|
|
struct mutex update_lock;
|
|
bool valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
/* registers values */
|
|
u16 temp_input[2]; /* local/remote */
|
|
u16 temp_high[2]; /* local/remote */
|
|
u8 alarms;
|
|
};
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static void max6642_init_client(struct max6642_data *data,
|
|
struct i2c_client *client)
|
|
{
|
|
u8 config;
|
|
|
|
/*
|
|
* Start the conversions.
|
|
*/
|
|
config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG);
|
|
if (config & 0x40)
|
|
i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG,
|
|
config & 0xBF); /* run */
|
|
|
|
data->temp_high[0] = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_LOCAL_HIGH);
|
|
data->temp_high[1] = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_REMOTE_HIGH);
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int max6642_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
u8 reg_config, reg_status, man_id;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/* identification */
|
|
man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID);
|
|
if (man_id != 0x4D)
|
|
return -ENODEV;
|
|
|
|
/* sanity check */
|
|
if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D
|
|
|| i2c_smbus_read_byte_data(client, 0x06) != 0x4D
|
|
|| i2c_smbus_read_byte_data(client, 0xff) != 0x4D)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* We read the config and status register, the 4 lower bits in the
|
|
* config register should be zero and bit 5, 3, 1 and 0 should be
|
|
* zero in the status register.
|
|
*/
|
|
reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG);
|
|
if ((reg_config & 0x0f) != 0x00)
|
|
return -ENODEV;
|
|
|
|
/* in between, another round of sanity checks */
|
|
if (i2c_smbus_read_byte_data(client, 0x04) != reg_config
|
|
|| i2c_smbus_read_byte_data(client, 0x06) != reg_config
|
|
|| i2c_smbus_read_byte_data(client, 0xff) != reg_config)
|
|
return -ENODEV;
|
|
|
|
reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS);
|
|
if ((reg_status & 0x2b) != 0x00)
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, "max6642", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct max6642_data *max6642_update_device(struct device *dev)
|
|
{
|
|
struct max6642_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
u16 val, tmp;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
dev_dbg(dev, "Updating max6642 data.\n");
|
|
val = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_LOCAL_TEMPL);
|
|
tmp = (val >> 6) & 3;
|
|
val = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_LOCAL_TEMP);
|
|
val = (val << 2) | tmp;
|
|
data->temp_input[0] = val;
|
|
val = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_REMOTE_TEMPL);
|
|
tmp = (val >> 6) & 3;
|
|
val = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_REMOTE_TEMP);
|
|
val = (val << 2) | tmp;
|
|
data->temp_input[1] = val;
|
|
data->alarms = i2c_smbus_read_byte_data(client,
|
|
MAX6642_REG_R_STATUS);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
static ssize_t temp_max10_show(struct device *dev,
|
|
struct device_attribute *dev_attr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
|
|
struct max6642_data *data = max6642_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
temp_from_reg10(data->temp_input[attr->index]));
|
|
}
|
|
|
|
static ssize_t temp_max_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
|
|
struct max6642_data *data = max6642_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr]));
|
|
}
|
|
|
|
static ssize_t temp_max_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
|
|
struct max6642_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_high[attr2->nr] = clamp_val(temp_to_reg(val), 0, 255);
|
|
i2c_smbus_write_byte_data(data->client, attr2->index,
|
|
data->temp_high[attr2->nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
struct max6642_data *data = max6642_update_device(dev);
|
|
return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_max10, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_max10, 1);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp_max, 0,
|
|
MAX6642_REG_W_LOCAL_HIGH);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp_max, 1,
|
|
MAX6642_REG_W_REMOTE_HIGH);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4);
|
|
|
|
static struct attribute *max6642_attrs[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(max6642);
|
|
|
|
static int max6642_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct max6642_data *data;
|
|
struct device *hwmon_dev;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct max6642_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the MAX6642 chip */
|
|
max6642_init_client(data, client);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
|
|
client->name, data,
|
|
max6642_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static const struct i2c_device_id max6642_id[] = {
|
|
{ "max6642", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max6642_id);
|
|
|
|
static struct i2c_driver max6642_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "max6642",
|
|
},
|
|
.probe_new = max6642_probe,
|
|
.id_table = max6642_id,
|
|
.detect = max6642_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(max6642_driver);
|
|
|
|
MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>");
|
|
MODULE_DESCRIPTION("MAX6642 sensor driver");
|
|
MODULE_LICENSE("GPL");
|