332 строки
6.7 KiB
C
332 строки
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* E3C EC100 demodulator driver
|
|
*
|
|
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
|
|
*/
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "ec100.h"
|
|
|
|
struct ec100_state {
|
|
struct i2c_adapter *i2c;
|
|
struct dvb_frontend frontend;
|
|
struct ec100_config config;
|
|
|
|
u16 ber;
|
|
};
|
|
|
|
/* write single register */
|
|
static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
u8 buf[2] = {reg, val};
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = state->config.demod_address,
|
|
.flags = 0,
|
|
.len = sizeof(buf),
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 1);
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n",
|
|
KBUILD_MODNAME, ret, reg);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* read single register */
|
|
static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = state->config.demod_address,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = ®
|
|
}, {
|
|
.addr = state->config.demod_address,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = val
|
|
}
|
|
};
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%02x\n",
|
|
KBUILD_MODNAME, ret, reg);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ec100_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
struct ec100_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 tmp, tmp2;
|
|
|
|
dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n",
|
|
__func__, c->frequency, c->bandwidth_hz);
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
|
|
ret = ec100_write_reg(state, 0x04, 0x06);
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_write_reg(state, 0x67, 0x58);
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_write_reg(state, 0x05, 0x18);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* reg/bw | 6 | 7 | 8
|
|
-------+------+------+------
|
|
A 0x1b | 0xa1 | 0xe7 | 0x2c
|
|
A 0x1c | 0x55 | 0x63 | 0x72
|
|
-------+------+------+------
|
|
B 0x1b | 0xb7 | 0x00 | 0x49
|
|
B 0x1c | 0x55 | 0x64 | 0x72 */
|
|
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
tmp = 0xb7;
|
|
tmp2 = 0x55;
|
|
break;
|
|
case 7000000:
|
|
tmp = 0x00;
|
|
tmp2 = 0x64;
|
|
break;
|
|
case 8000000:
|
|
default:
|
|
tmp = 0x49;
|
|
tmp2 = 0x72;
|
|
}
|
|
|
|
ret = ec100_write_reg(state, 0x1b, tmp);
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_write_reg(state, 0x1c, tmp2);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = ec100_write_reg(state, 0x08, 0x24);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = ec100_write_reg(state, 0x00, 0x00); /* go */
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_write_reg(state, 0x00, 0x20); /* go */
|
|
if (ret)
|
|
goto error;
|
|
|
|
return ret;
|
|
error:
|
|
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ec100_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 300;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ec100_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct ec100_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 tmp;
|
|
*status = 0;
|
|
|
|
ret = ec100_read_reg(state, 0x42, &tmp);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (tmp & 0x80) {
|
|
/* bit7 set - have lock */
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
|
|
FE_HAS_SYNC | FE_HAS_LOCK;
|
|
} else {
|
|
ret = ec100_read_reg(state, 0x01, &tmp);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (tmp & 0x10) {
|
|
/* bit4 set - have signal */
|
|
*status |= FE_HAS_SIGNAL;
|
|
if (!(tmp & 0x01)) {
|
|
/* bit0 clear - have ~valid signal */
|
|
*status |= FE_HAS_CARRIER | FE_HAS_VITERBI;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
error:
|
|
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct ec100_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 tmp, tmp2;
|
|
u16 ber2;
|
|
|
|
*ber = 0;
|
|
|
|
ret = ec100_read_reg(state, 0x65, &tmp);
|
|
if (ret)
|
|
goto error;
|
|
ret = ec100_read_reg(state, 0x66, &tmp2);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ber2 = (tmp2 << 8) | tmp;
|
|
|
|
/* if counter overflow or clear */
|
|
if (ber2 < state->ber)
|
|
*ber = ber2;
|
|
else
|
|
*ber = ber2 - state->ber;
|
|
|
|
state->ber = ber2;
|
|
|
|
return ret;
|
|
error:
|
|
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct ec100_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = ec100_read_reg(state, 0x24, &tmp);
|
|
if (ret) {
|
|
*strength = 0;
|
|
goto error;
|
|
}
|
|
|
|
*strength = ((tmp << 8) | tmp);
|
|
|
|
return ret;
|
|
error:
|
|
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
*snr = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
*ucblocks = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void ec100_release(struct dvb_frontend *fe)
|
|
{
|
|
struct ec100_state *state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops ec100_ops;
|
|
|
|
struct dvb_frontend *ec100_attach(const struct ec100_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
int ret;
|
|
struct ec100_state *state = NULL;
|
|
u8 tmp;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->i2c = i2c;
|
|
memcpy(&state->config, config, sizeof(struct ec100_config));
|
|
|
|
/* check if the demod is there */
|
|
ret = ec100_read_reg(state, 0x33, &tmp);
|
|
if (ret || tmp != 0x0b)
|
|
goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &ec100_ops,
|
|
sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
return &state->frontend;
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ec100_attach);
|
|
|
|
static const struct dvb_frontend_ops ec100_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "E3C EC100 DVB-T",
|
|
.caps =
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.release = ec100_release,
|
|
.set_frontend = ec100_set_frontend,
|
|
.get_tune_settings = ec100_get_tune_settings,
|
|
.read_status = ec100_read_status,
|
|
.read_ber = ec100_read_ber,
|
|
.read_signal_strength = ec100_read_signal_strength,
|
|
.read_snr = ec100_read_snr,
|
|
.read_ucblocks = ec100_read_ucblocks,
|
|
};
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|