630 строки
15 KiB
C
630 строки
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
Driver for the Spase sp887x demodulator
|
|
*/
|
|
|
|
/*
|
|
* This driver needs external firmware. Please use the command
|
|
* "<kerneldir>/scripts/get_dvb_firmware sp887x" to
|
|
* download/extract it, and then copy it to /usr/lib/hotplug/firmware
|
|
* or /lib/firmware (depending on configuration of firmware hotplug).
|
|
*/
|
|
#define SP887X_DEFAULT_FIRMWARE "dvb-fe-sp887x.fw"
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "sp887x.h"
|
|
|
|
|
|
struct sp887x_state {
|
|
struct i2c_adapter* i2c;
|
|
const struct sp887x_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
/* demodulator private data */
|
|
u8 initialised:1;
|
|
};
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "sp887x: " args); \
|
|
} while (0)
|
|
|
|
static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len)
|
|
{
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = len };
|
|
int err;
|
|
|
|
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
|
printk ("%s: i2c write error (addr %02x, err == %i)\n",
|
|
__func__, state->config->demod_address, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
|
|
{
|
|
u8 b0 [] = { reg >> 8 , reg & 0xff, data >> 8, data & 0xff };
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 4 };
|
|
int ret;
|
|
|
|
if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
/*
|
|
* in case of soft reset we ignore ACK errors...
|
|
*/
|
|
if (!(reg == 0xf1a && data == 0x000 &&
|
|
(ret == -EREMOTEIO || ret == -EFAULT)))
|
|
{
|
|
printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n",
|
|
__func__, reg & 0xffff, data & 0xffff, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_readreg (struct sp887x_state* state, u16 reg)
|
|
{
|
|
u8 b0 [] = { reg >> 8 , reg & 0xff };
|
|
u8 b1 [2];
|
|
int ret;
|
|
struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
|
|
|
|
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
|
|
printk("%s: readreg error (ret == %i)\n", __func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
return (((b1[0] << 8) | b1[1]) & 0xfff);
|
|
}
|
|
|
|
static void sp887x_microcontroller_stop (struct sp887x_state* state)
|
|
{
|
|
dprintk("%s\n", __func__);
|
|
sp887x_writereg(state, 0xf08, 0x000);
|
|
sp887x_writereg(state, 0xf09, 0x000);
|
|
|
|
/* microcontroller STOP */
|
|
sp887x_writereg(state, 0xf00, 0x000);
|
|
}
|
|
|
|
static void sp887x_microcontroller_start (struct sp887x_state* state)
|
|
{
|
|
dprintk("%s\n", __func__);
|
|
sp887x_writereg(state, 0xf08, 0x000);
|
|
sp887x_writereg(state, 0xf09, 0x000);
|
|
|
|
/* microcontroller START */
|
|
sp887x_writereg(state, 0xf00, 0x001);
|
|
}
|
|
|
|
static void sp887x_setup_agc (struct sp887x_state* state)
|
|
{
|
|
/* setup AGC parameters */
|
|
dprintk("%s\n", __func__);
|
|
sp887x_writereg(state, 0x33c, 0x054);
|
|
sp887x_writereg(state, 0x33b, 0x04c);
|
|
sp887x_writereg(state, 0x328, 0x000);
|
|
sp887x_writereg(state, 0x327, 0x005);
|
|
sp887x_writereg(state, 0x326, 0x001);
|
|
sp887x_writereg(state, 0x325, 0x001);
|
|
sp887x_writereg(state, 0x324, 0x001);
|
|
sp887x_writereg(state, 0x318, 0x050);
|
|
sp887x_writereg(state, 0x317, 0x3fe);
|
|
sp887x_writereg(state, 0x316, 0x001);
|
|
sp887x_writereg(state, 0x313, 0x005);
|
|
sp887x_writereg(state, 0x312, 0x002);
|
|
sp887x_writereg(state, 0x306, 0x000);
|
|
sp887x_writereg(state, 0x303, 0x000);
|
|
}
|
|
|
|
#define BLOCKSIZE 30
|
|
#define FW_SIZE 0x4000
|
|
/*
|
|
* load firmware and setup MPEG interface...
|
|
*/
|
|
static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
u8 buf [BLOCKSIZE + 2];
|
|
int i;
|
|
int fw_size = fw->size;
|
|
const unsigned char *mem = fw->data;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */
|
|
if (fw_size < FW_SIZE + 10)
|
|
return -ENODEV;
|
|
|
|
mem = fw->data + 10;
|
|
|
|
/* soft reset */
|
|
sp887x_writereg(state, 0xf1a, 0x000);
|
|
|
|
sp887x_microcontroller_stop (state);
|
|
|
|
printk ("%s: firmware upload... ", __func__);
|
|
|
|
/* setup write pointer to -1 (end of memory) */
|
|
/* bit 0x8000 in address is set to enable 13bit mode */
|
|
sp887x_writereg(state, 0x8f08, 0x1fff);
|
|
|
|
/* dummy write (wrap around to start of memory) */
|
|
sp887x_writereg(state, 0x8f0a, 0x0000);
|
|
|
|
for (i = 0; i < FW_SIZE; i += BLOCKSIZE) {
|
|
int c = BLOCKSIZE;
|
|
int err;
|
|
|
|
if (c > FW_SIZE - i)
|
|
c = FW_SIZE - i;
|
|
|
|
/* bit 0x8000 in address is set to enable 13bit mode */
|
|
/* bit 0x4000 enables multibyte read/write transfers */
|
|
/* write register is 0xf0a */
|
|
buf[0] = 0xcf;
|
|
buf[1] = 0x0a;
|
|
|
|
memcpy(&buf[2], mem + i, c);
|
|
|
|
if ((err = i2c_writebytes (state, buf, c+2)) < 0) {
|
|
printk ("failed.\n");
|
|
printk ("%s: i2c error (err == %i)\n", __func__, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* don't write RS bytes between packets */
|
|
sp887x_writereg(state, 0xc13, 0x001);
|
|
|
|
/* suppress clock if (!data_valid) */
|
|
sp887x_writereg(state, 0xc14, 0x000);
|
|
|
|
/* setup MPEG interface... */
|
|
sp887x_writereg(state, 0xc1a, 0x872);
|
|
sp887x_writereg(state, 0xc1b, 0x001);
|
|
sp887x_writereg(state, 0xc1c, 0x000); /* parallel mode (serial mode == 1) */
|
|
sp887x_writereg(state, 0xc1a, 0x871);
|
|
|
|
/* ADC mode, 2 for MT8872, 3 for SP8870/SP8871 */
|
|
sp887x_writereg(state, 0x301, 0x002);
|
|
|
|
sp887x_setup_agc(state);
|
|
|
|
/* bit 0x010: enable data valid signal */
|
|
sp887x_writereg(state, 0xd00, 0x010);
|
|
sp887x_writereg(state, 0x0d1, 0x000);
|
|
return 0;
|
|
};
|
|
|
|
static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
|
|
{
|
|
int known_parameters = 1;
|
|
|
|
*reg0xc05 = 0x000;
|
|
|
|
switch (p->modulation) {
|
|
case QPSK:
|
|
break;
|
|
case QAM_16:
|
|
*reg0xc05 |= (1 << 10);
|
|
break;
|
|
case QAM_64:
|
|
*reg0xc05 |= (2 << 10);
|
|
break;
|
|
case QAM_AUTO:
|
|
known_parameters = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (p->hierarchy) {
|
|
case HIERARCHY_NONE:
|
|
break;
|
|
case HIERARCHY_1:
|
|
*reg0xc05 |= (1 << 7);
|
|
break;
|
|
case HIERARCHY_2:
|
|
*reg0xc05 |= (2 << 7);
|
|
break;
|
|
case HIERARCHY_4:
|
|
*reg0xc05 |= (3 << 7);
|
|
break;
|
|
case HIERARCHY_AUTO:
|
|
known_parameters = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (p->code_rate_HP) {
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
*reg0xc05 |= (1 << 3);
|
|
break;
|
|
case FEC_3_4:
|
|
*reg0xc05 |= (2 << 3);
|
|
break;
|
|
case FEC_5_6:
|
|
*reg0xc05 |= (3 << 3);
|
|
break;
|
|
case FEC_7_8:
|
|
*reg0xc05 |= (4 << 3);
|
|
break;
|
|
case FEC_AUTO:
|
|
known_parameters = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (known_parameters)
|
|
*reg0xc05 |= (2 << 1); /* use specified parameters */
|
|
else
|
|
*reg0xc05 |= (1 << 1); /* enable autoprobing */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* estimates division of two 24bit numbers,
|
|
* derived from the ves1820/stv0299 driver code
|
|
*/
|
|
static void divide (int n, int d, int *quotient_i, int *quotient_f)
|
|
{
|
|
unsigned int q, r;
|
|
|
|
r = (n % d) << 8;
|
|
q = (r / d);
|
|
|
|
if (quotient_i)
|
|
*quotient_i = q;
|
|
|
|
if (quotient_f) {
|
|
r = (r % d) << 8;
|
|
q = (q << 8) | (r / d);
|
|
r = (r % d) << 8;
|
|
*quotient_f = (q << 8) | (r / d);
|
|
}
|
|
}
|
|
|
|
static void sp887x_correct_offsets (struct sp887x_state* state,
|
|
struct dtv_frontend_properties *p,
|
|
int actual_freq)
|
|
{
|
|
static const u32 srate_correction [] = { 1879617, 4544878, 8098561 };
|
|
int bw_index;
|
|
int freq_offset = actual_freq - p->frequency;
|
|
int sysclock = 61003; //[kHz]
|
|
int ifreq = 36000000;
|
|
int freq;
|
|
int frequency_shift;
|
|
|
|
switch (p->bandwidth_hz) {
|
|
default:
|
|
case 8000000:
|
|
bw_index = 0;
|
|
break;
|
|
case 7000000:
|
|
bw_index = 1;
|
|
break;
|
|
case 6000000:
|
|
bw_index = 2;
|
|
break;
|
|
}
|
|
|
|
if (p->inversion == INVERSION_ON)
|
|
freq = ifreq - freq_offset;
|
|
else
|
|
freq = ifreq + freq_offset;
|
|
|
|
divide(freq / 333, sysclock, NULL, &frequency_shift);
|
|
|
|
if (p->inversion == INVERSION_ON)
|
|
frequency_shift = -frequency_shift;
|
|
|
|
/* sample rate correction */
|
|
sp887x_writereg(state, 0x319, srate_correction[bw_index] >> 12);
|
|
sp887x_writereg(state, 0x31a, srate_correction[bw_index] & 0xfff);
|
|
|
|
/* carrier offset correction */
|
|
sp887x_writereg(state, 0x309, frequency_shift >> 12);
|
|
sp887x_writereg(state, 0x30a, frequency_shift & 0xfff);
|
|
}
|
|
|
|
static int sp887x_setup_frontend_parameters(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
unsigned actual_freq;
|
|
int err;
|
|
u16 val, reg0xc05;
|
|
|
|
if (p->bandwidth_hz != 8000000 &&
|
|
p->bandwidth_hz != 7000000 &&
|
|
p->bandwidth_hz != 6000000)
|
|
return -EINVAL;
|
|
|
|
if ((err = configure_reg0xc05(p, ®0xc05)))
|
|
return err;
|
|
|
|
sp887x_microcontroller_stop(state);
|
|
|
|
/* setup the PLL */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
if (fe->ops.tuner_ops.get_frequency) {
|
|
fe->ops.tuner_ops.get_frequency(fe, &actual_freq);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
} else {
|
|
actual_freq = p->frequency;
|
|
}
|
|
|
|
/* read status reg in order to clear <pending irqs */
|
|
sp887x_readreg(state, 0x200);
|
|
|
|
sp887x_correct_offsets(state, p, actual_freq);
|
|
|
|
/* filter for 6/7/8 Mhz channel */
|
|
if (p->bandwidth_hz == 6000000)
|
|
val = 2;
|
|
else if (p->bandwidth_hz == 7000000)
|
|
val = 1;
|
|
else
|
|
val = 0;
|
|
|
|
sp887x_writereg(state, 0x311, val);
|
|
|
|
/* scan order: 2k first = 0, 8k first = 1 */
|
|
if (p->transmission_mode == TRANSMISSION_MODE_2K)
|
|
sp887x_writereg(state, 0x338, 0x000);
|
|
else
|
|
sp887x_writereg(state, 0x338, 0x001);
|
|
|
|
sp887x_writereg(state, 0xc05, reg0xc05);
|
|
|
|
if (p->bandwidth_hz == 6000000)
|
|
val = 2 << 3;
|
|
else if (p->bandwidth_hz == 7000000)
|
|
val = 3 << 3;
|
|
else
|
|
val = 0 << 3;
|
|
|
|
/* enable OFDM and SAW bits as lock indicators in sync register 0xf17,
|
|
* optimize algorithm for given bandwidth...
|
|
*/
|
|
sp887x_writereg(state, 0xf14, 0x160 | val);
|
|
sp887x_writereg(state, 0xf15, 0x000);
|
|
|
|
sp887x_microcontroller_start(state);
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
u16 snr12 = sp887x_readreg(state, 0xf16);
|
|
u16 sync0x200 = sp887x_readreg(state, 0x200);
|
|
u16 sync0xf17 = sp887x_readreg(state, 0xf17);
|
|
|
|
*status = 0;
|
|
|
|
if (snr12 > 0x00f)
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
//if (sync0x200 & 0x004)
|
|
// *status |= FE_HAS_SYNC | FE_HAS_CARRIER;
|
|
|
|
//if (sync0x200 & 0x008)
|
|
// *status |= FE_HAS_VITERBI;
|
|
|
|
if ((sync0xf17 & 0x00f) == 0x002) {
|
|
*status |= FE_HAS_LOCK;
|
|
*status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_CARRIER;
|
|
}
|
|
|
|
if (sync0x200 & 0x001) { /* tuner adjustment requested...*/
|
|
int steps = (sync0x200 >> 4) & 0x00f;
|
|
if (steps & 0x008)
|
|
steps = -steps;
|
|
dprintk("sp887x: implement tuner adjustment (%+i steps)!!\n",
|
|
steps);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
|
|
(sp887x_readreg(state, 0xc07) << 6);
|
|
sp887x_writereg(state, 0xc08, 0x000);
|
|
sp887x_writereg(state, 0xc07, 0x000);
|
|
if (*ber >= 0x3fff0)
|
|
*ber = ~0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
u16 snr12 = sp887x_readreg(state, 0xf16);
|
|
u32 signal = 3 * (snr12 << 4);
|
|
*strength = (signal < 0xffff) ? signal : 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
u16 snr12 = sp887x_readreg(state, 0xf16);
|
|
*snr = (snr12 << 4) | (snr12 >> 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
*ucblocks = sp887x_readreg(state, 0xc0c);
|
|
if (*ucblocks == 0xfff)
|
|
*ucblocks = ~0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
return sp887x_writereg(state, 0x206, 0x001);
|
|
} else {
|
|
return sp887x_writereg(state, 0x206, 0x000);
|
|
}
|
|
}
|
|
|
|
static int sp887x_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
|
|
/* tristate TS output and disable interface pins */
|
|
sp887x_writereg(state, 0xc18, 0x000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_init(struct dvb_frontend* fe)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
const struct firmware *fw = NULL;
|
|
int ret;
|
|
|
|
if (!state->initialised) {
|
|
/* request the firmware, this will block until someone uploads it */
|
|
printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE);
|
|
ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE);
|
|
if (ret) {
|
|
printk("sp887x: no firmware upload (timeout or file not found?)\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = sp887x_initial_setup(fe, fw);
|
|
release_firmware(fw);
|
|
if (ret) {
|
|
printk("sp887x: writing firmware to device failed\n");
|
|
return ret;
|
|
}
|
|
printk("sp887x: firmware upload complete\n");
|
|
state->initialised = 1;
|
|
}
|
|
|
|
/* enable TS output and interface pins */
|
|
sp887x_writereg(state, 0xc18, 0x00d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 350;
|
|
fesettings->step_size = 166666*2;
|
|
fesettings->max_drift = (166666*2)+1;
|
|
return 0;
|
|
}
|
|
|
|
static void sp887x_release(struct dvb_frontend* fe)
|
|
{
|
|
struct sp887x_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops sp887x_ops;
|
|
|
|
struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct sp887x_state* state = NULL;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->initialised = 0;
|
|
|
|
/* check if the demod is there */
|
|
if (sp887x_readreg(state, 0x0200) < 0) goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &sp887x_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops sp887x_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Spase SP887x DVB-T",
|
|
.frequency_min_hz = 50500 * kHz,
|
|
.frequency_max_hz = 858000 * kHz,
|
|
.frequency_stepsize_hz = 166666,
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
|
|
FE_CAN_RECOVER
|
|
},
|
|
|
|
.release = sp887x_release,
|
|
|
|
.init = sp887x_init,
|
|
.sleep = sp887x_sleep,
|
|
.i2c_gate_ctrl = sp887x_i2c_gate_ctrl,
|
|
|
|
.set_frontend = sp887x_setup_frontend_parameters,
|
|
.get_tune_settings = sp887x_get_tune_settings,
|
|
|
|
.read_status = sp887x_read_status,
|
|
.read_ber = sp887x_read_ber,
|
|
.read_signal_strength = sp887x_read_signal_strength,
|
|
.read_snr = sp887x_read_snr,
|
|
.read_ucblocks = sp887x_read_ucblocks,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Spase sp887x DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL_GPL(sp887x_attach);
|