598 строки
16 KiB
C
598 строки
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
TDA10023 - DVB-C decoder
|
|
(as used in Philips CU1216-3 NIM and the Reelbox DVB-C tuner card)
|
|
|
|
Copyright (C) 2005 Georg Acher, BayCom GmbH (acher at baycom dot de)
|
|
Copyright (c) 2006 Hartmut Birr (e9hack at gmail dot com)
|
|
|
|
Remotely based on tda10021.c
|
|
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
|
|
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
|
|
Support for TDA10021
|
|
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "tda1002x.h"
|
|
|
|
#define REG0_INIT_VAL 0x23
|
|
|
|
struct tda10023_state {
|
|
struct i2c_adapter* i2c;
|
|
/* configuration settings */
|
|
const struct tda10023_config *config;
|
|
struct dvb_frontend frontend;
|
|
|
|
u8 pwm;
|
|
u8 reg0;
|
|
|
|
/* clock settings */
|
|
u32 xtal;
|
|
u8 pll_m;
|
|
u8 pll_p;
|
|
u8 pll_n;
|
|
u32 sysclk;
|
|
};
|
|
|
|
#define dprintk(x...)
|
|
|
|
static int verbose;
|
|
|
|
static u8 tda10023_readreg (struct tda10023_state* state, u8 reg)
|
|
{
|
|
u8 b0 [] = { reg };
|
|
u8 b1 [] = { 0 };
|
|
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
|
|
int ret;
|
|
|
|
ret = i2c_transfer (state->i2c, msg, 2);
|
|
if (ret != 2) {
|
|
int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
|
|
printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error (reg == 0x%02x, ret == %i)\n",
|
|
num, __func__, reg, ret);
|
|
}
|
|
return b1[0];
|
|
}
|
|
|
|
static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data)
|
|
{
|
|
u8 buf[] = { reg, data };
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
|
|
int ret;
|
|
|
|
ret = i2c_transfer (state->i2c, &msg, 1);
|
|
if (ret != 1) {
|
|
int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
|
|
printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
|
|
num, __func__, reg, data, ret);
|
|
}
|
|
return (ret != 1) ? -EREMOTEIO : 0;
|
|
}
|
|
|
|
|
|
static int tda10023_writebit (struct tda10023_state* state, u8 reg, u8 mask,u8 data)
|
|
{
|
|
if (mask==0xff)
|
|
return tda10023_writereg(state, reg, data);
|
|
else {
|
|
u8 val;
|
|
val=tda10023_readreg(state,reg);
|
|
val&=~mask;
|
|
val|=(data&mask);
|
|
return tda10023_writereg(state, reg, val);
|
|
}
|
|
}
|
|
|
|
static void tda10023_writetab(struct tda10023_state* state, u8* tab)
|
|
{
|
|
u8 r,m,v;
|
|
while (1) {
|
|
r=*tab++;
|
|
m=*tab++;
|
|
v=*tab++;
|
|
if (r==0xff) {
|
|
if (m==0xff)
|
|
break;
|
|
else
|
|
msleep(m);
|
|
}
|
|
else
|
|
tda10023_writebit(state,r,m,v);
|
|
}
|
|
}
|
|
|
|
//get access to tuner
|
|
static int lock_tuner(struct tda10023_state* state)
|
|
{
|
|
u8 buf[2] = { 0x0f, 0xc0 };
|
|
struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
|
|
|
|
if(i2c_transfer(state->i2c, &msg, 1) != 1)
|
|
{
|
|
printk("tda10023: lock tuner fails\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
//release access from tuner
|
|
static int unlock_tuner(struct tda10023_state* state)
|
|
{
|
|
u8 buf[2] = { 0x0f, 0x40 };
|
|
struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
|
|
|
|
if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
|
|
{
|
|
printk("tda10023: unlock tuner fails\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_setup_reg0 (struct tda10023_state* state, u8 reg0)
|
|
{
|
|
reg0 |= state->reg0 & 0x63;
|
|
|
|
tda10023_writereg (state, 0x00, reg0 & 0xfe);
|
|
tda10023_writereg (state, 0x00, reg0 | 0x01);
|
|
|
|
state->reg0 = reg0;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr)
|
|
{
|
|
s32 BDR;
|
|
s32 BDRI;
|
|
s16 SFIL=0;
|
|
u16 NDEC = 0;
|
|
|
|
/* avoid floating point operations multiplying syscloc and divider
|
|
by 10 */
|
|
u32 sysclk_x_10 = state->sysclk * 10;
|
|
|
|
if (sr < (u32)(sysclk_x_10/984)) {
|
|
NDEC=3;
|
|
SFIL=1;
|
|
} else if (sr < (u32)(sysclk_x_10/640)) {
|
|
NDEC=3;
|
|
SFIL=0;
|
|
} else if (sr < (u32)(sysclk_x_10/492)) {
|
|
NDEC=2;
|
|
SFIL=1;
|
|
} else if (sr < (u32)(sysclk_x_10/320)) {
|
|
NDEC=2;
|
|
SFIL=0;
|
|
} else if (sr < (u32)(sysclk_x_10/246)) {
|
|
NDEC=1;
|
|
SFIL=1;
|
|
} else if (sr < (u32)(sysclk_x_10/160)) {
|
|
NDEC=1;
|
|
SFIL=0;
|
|
} else if (sr < (u32)(sysclk_x_10/123)) {
|
|
NDEC=0;
|
|
SFIL=1;
|
|
}
|
|
|
|
BDRI = (state->sysclk)*16;
|
|
BDRI>>=NDEC;
|
|
BDRI +=sr/2;
|
|
BDRI /=sr;
|
|
|
|
if (BDRI>255)
|
|
BDRI=255;
|
|
|
|
{
|
|
u64 BDRX;
|
|
|
|
BDRX=1<<(24+NDEC);
|
|
BDRX*=sr;
|
|
do_div(BDRX, state->sysclk); /* BDRX/=SYSCLK; */
|
|
|
|
BDR=(s32)BDRX;
|
|
}
|
|
dprintk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n",
|
|
sr, BDR, BDRI, NDEC);
|
|
tda10023_writebit (state, 0x03, 0xc0, NDEC<<6);
|
|
tda10023_writereg (state, 0x0a, BDR&255);
|
|
tda10023_writereg (state, 0x0b, (BDR>>8)&255);
|
|
tda10023_writereg (state, 0x0c, (BDR>>16)&31);
|
|
tda10023_writereg (state, 0x0d, BDRI);
|
|
tda10023_writereg (state, 0x3d, (SFIL<<7));
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_init (struct dvb_frontend *fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 tda10023_inittab[] = {
|
|
/* reg mask val */
|
|
/* 000 */ 0x2a, 0xff, 0x02, /* PLL3, Bypass, Power Down */
|
|
/* 003 */ 0xff, 0x64, 0x00, /* Sleep 100ms */
|
|
/* 006 */ 0x2a, 0xff, 0x03, /* PLL3, Bypass, Power Down */
|
|
/* 009 */ 0xff, 0x64, 0x00, /* Sleep 100ms */
|
|
/* PLL1 */
|
|
/* 012 */ 0x28, 0xff, (state->pll_m-1),
|
|
/* PLL2 */
|
|
/* 015 */ 0x29, 0xff, ((state->pll_p-1)<<6)|(state->pll_n-1),
|
|
/* GPR FSAMPLING=1 */
|
|
/* 018 */ 0x00, 0xff, REG0_INIT_VAL,
|
|
/* 021 */ 0x2a, 0xff, 0x08, /* PLL3 PSACLK=1 */
|
|
/* 024 */ 0xff, 0x64, 0x00, /* Sleep 100ms */
|
|
/* 027 */ 0x1f, 0xff, 0x00, /* RESET */
|
|
/* 030 */ 0xff, 0x64, 0x00, /* Sleep 100ms */
|
|
/* 033 */ 0xe6, 0x0c, 0x04, /* RSCFG_IND */
|
|
/* 036 */ 0x10, 0xc0, 0x80, /* DECDVBCFG1 PBER=1 */
|
|
|
|
/* 039 */ 0x0e, 0xff, 0x82, /* GAIN1 */
|
|
/* 042 */ 0x03, 0x08, 0x08, /* CLKCONF DYN=1 */
|
|
/* 045 */ 0x2e, 0xbf, 0x30, /* AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1
|
|
PPWMTUN=0 PPWMIF=0 */
|
|
/* 048 */ 0x01, 0xff, 0x30, /* AGCREF */
|
|
/* 051 */ 0x1e, 0x84, 0x84, /* CONTROL SACLK_ON=1 */
|
|
/* 054 */ 0x1b, 0xff, 0xc8, /* ADC TWOS=1 */
|
|
/* 057 */ 0x3b, 0xff, 0xff, /* IFMAX */
|
|
/* 060 */ 0x3c, 0xff, 0x00, /* IFMIN */
|
|
/* 063 */ 0x34, 0xff, 0x00, /* PWMREF */
|
|
/* 066 */ 0x35, 0xff, 0xff, /* TUNMAX */
|
|
/* 069 */ 0x36, 0xff, 0x00, /* TUNMIN */
|
|
/* 072 */ 0x06, 0xff, 0x7f, /* EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 */
|
|
/* 075 */ 0x1c, 0x30, 0x30, /* EQCONF2 STEPALGO=SGNALGO=1 */
|
|
/* 078 */ 0x37, 0xff, 0xf6, /* DELTAF_LSB */
|
|
/* 081 */ 0x38, 0xff, 0xff, /* DELTAF_MSB */
|
|
/* 084 */ 0x02, 0xff, 0x93, /* AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 */
|
|
/* 087 */ 0x2d, 0xff, 0xf6, /* SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 */
|
|
/* 090 */ 0x04, 0x10, 0x00, /* SWRAMP=1 */
|
|
/* 093 */ 0x12, 0xff, TDA10023_OUTPUT_MODE_PARALLEL_B, /*
|
|
INTP1 POCLKP=1 FEL=1 MFS=0 */
|
|
/* 096 */ 0x2b, 0x01, 0xa1, /* INTS1 */
|
|
/* 099 */ 0x20, 0xff, 0x04, /* INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? */
|
|
/* 102 */ 0x2c, 0xff, 0x0d, /* INTP/S TRIP=0 TRIS=0 */
|
|
/* 105 */ 0xc4, 0xff, 0x00,
|
|
/* 108 */ 0xc3, 0x30, 0x00,
|
|
/* 111 */ 0xb5, 0xff, 0x19, /* ERAGC_THD */
|
|
/* 114 */ 0x00, 0x03, 0x01, /* GPR, CLBS soft reset */
|
|
/* 117 */ 0x00, 0x03, 0x03, /* GPR, CLBS soft reset */
|
|
/* 120 */ 0xff, 0x64, 0x00, /* Sleep 100ms */
|
|
/* 123 */ 0xff, 0xff, 0xff
|
|
};
|
|
dprintk("DVB: TDA10023(%d): init chip\n", fe->dvb->num);
|
|
|
|
/* override default values if set in config */
|
|
if (state->config->deltaf) {
|
|
tda10023_inittab[80] = (state->config->deltaf & 0xff);
|
|
tda10023_inittab[83] = (state->config->deltaf >> 8);
|
|
}
|
|
|
|
if (state->config->output_mode)
|
|
tda10023_inittab[95] = state->config->output_mode;
|
|
|
|
tda10023_writetab(state, tda10023_inittab);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct qam_params {
|
|
u8 qam, lockthr, mseth, aref, agcrefnyq, eragnyq_thd;
|
|
};
|
|
|
|
static int tda10023_set_parameters(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
unsigned qam = c->modulation;
|
|
bool is_annex_c;
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
static const struct qam_params qam_params[] = {
|
|
/* Modulation QAM LOCKTHR MSETH AREF AGCREFNYQ ERAGCNYQ_THD */
|
|
[QPSK] = { (5<<2), 0x78, 0x8c, 0x96, 0x78, 0x4c },
|
|
[QAM_16] = { (0<<2), 0x87, 0xa2, 0x91, 0x8c, 0x57 },
|
|
[QAM_32] = { (1<<2), 0x64, 0x74, 0x96, 0x8c, 0x57 },
|
|
[QAM_64] = { (2<<2), 0x46, 0x43, 0x6a, 0x6a, 0x44 },
|
|
[QAM_128] = { (3<<2), 0x36, 0x34, 0x7e, 0x78, 0x4c },
|
|
[QAM_256] = { (4<<2), 0x26, 0x23, 0x6c, 0x5c, 0x3c },
|
|
};
|
|
|
|
switch (delsys) {
|
|
case SYS_DVBC_ANNEX_A:
|
|
is_annex_c = false;
|
|
break;
|
|
case SYS_DVBC_ANNEX_C:
|
|
is_annex_c = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* gcc optimizes the code below the same way as it would code:
|
|
* "if (qam > 5) return -EINVAL;"
|
|
* Yet, the code is clearer, as it shows what QAM standards are
|
|
* supported by the driver, and avoids the usage of magic numbers on
|
|
* it.
|
|
*/
|
|
switch (qam) {
|
|
case QPSK:
|
|
case QAM_16:
|
|
case QAM_32:
|
|
case QAM_64:
|
|
case QAM_128:
|
|
case QAM_256:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
tda10023_set_symbolrate(state, c->symbol_rate);
|
|
tda10023_writereg(state, 0x05, qam_params[qam].lockthr);
|
|
tda10023_writereg(state, 0x08, qam_params[qam].mseth);
|
|
tda10023_writereg(state, 0x09, qam_params[qam].aref);
|
|
tda10023_writereg(state, 0xb4, qam_params[qam].agcrefnyq);
|
|
tda10023_writereg(state, 0xb6, qam_params[qam].eragnyq_thd);
|
|
#if 0
|
|
tda10023_writereg(state, 0x04, (c->inversion ? 0x12 : 0x32));
|
|
tda10023_writebit(state, 0x04, 0x60, (c->inversion ? 0 : 0x20));
|
|
#endif
|
|
tda10023_writebit(state, 0x04, 0x40, 0x40);
|
|
|
|
if (is_annex_c)
|
|
tda10023_writebit(state, 0x3d, 0xfc, 0x03);
|
|
else
|
|
tda10023_writebit(state, 0x3d, 0xfc, 0x02);
|
|
|
|
tda10023_setup_reg0(state, qam_params[qam].qam);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *status)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
int sync;
|
|
|
|
*status = 0;
|
|
|
|
//0x11[1] == CARLOCK -> Carrier locked
|
|
//0x11[2] == FSYNC -> Frame synchronisation
|
|
//0x11[3] == FEL -> Front End locked
|
|
//0x11[6] == NODVB -> DVB Mode Information
|
|
sync = tda10023_readreg (state, 0x11);
|
|
|
|
if (sync & 2)
|
|
*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
|
|
|
|
if (sync & 4)
|
|
*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
|
|
|
|
if (sync & 8)
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 a,b,c;
|
|
a=tda10023_readreg(state, 0x14);
|
|
b=tda10023_readreg(state, 0x15);
|
|
c=tda10023_readreg(state, 0x16)&0xf;
|
|
tda10023_writebit (state, 0x10, 0xc0, 0x00);
|
|
|
|
*ber = a | (b<<8)| (c<<16);
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 ifgain=tda10023_readreg(state, 0x2f);
|
|
|
|
u16 gain = ((255-tda10023_readreg(state, 0x17))) + (255-ifgain)/16;
|
|
// Max raw value is about 0xb0 -> Normalize to >0xf0 after 0x90
|
|
if (gain>0x90)
|
|
gain=gain+2*(gain-0x90);
|
|
if (gain>255)
|
|
gain=255;
|
|
|
|
*strength = (gain<<8)|gain;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
u8 quality = ~tda10023_readreg(state, 0x18);
|
|
*snr = (quality << 8) | quality;
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
u8 a,b,c,d;
|
|
a= tda10023_readreg (state, 0x74);
|
|
b= tda10023_readreg (state, 0x75);
|
|
c= tda10023_readreg (state, 0x76);
|
|
d= tda10023_readreg (state, 0x77);
|
|
*ucblocks = a | (b<<8)|(c<<16)|(d<<24);
|
|
|
|
tda10023_writebit (state, 0x10, 0x20,0x00);
|
|
tda10023_writebit (state, 0x10, 0x20,0x20);
|
|
tda10023_writebit (state, 0x13, 0x01, 0x00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *p)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
int sync,inv;
|
|
s8 afc = 0;
|
|
|
|
sync = tda10023_readreg(state, 0x11);
|
|
afc = tda10023_readreg(state, 0x19);
|
|
inv = tda10023_readreg(state, 0x04);
|
|
|
|
if (verbose) {
|
|
/* AFC only valid when carrier has been recovered */
|
|
printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" :
|
|
"DVB: TDA10023(%d): [AFC (%d) %dHz]\n",
|
|
state->frontend.dvb->num, afc,
|
|
-((s32)p->symbol_rate * afc) >> 10);
|
|
}
|
|
|
|
p->inversion = (inv&0x20?0:1);
|
|
p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
|
|
|
|
p->fec_inner = FEC_NONE;
|
|
p->frequency = ((p->frequency + 31250) / 62500) * 62500;
|
|
|
|
if (sync & 2)
|
|
p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
tda10023_writereg (state, 0x1b, 0x02); /* pdown ADC */
|
|
tda10023_writereg (state, 0x00, 0x80); /* standby */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10023_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
lock_tuner(state);
|
|
} else {
|
|
unlock_tuner(state);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void tda10023_release(struct dvb_frontend* fe)
|
|
{
|
|
struct tda10023_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops tda10023_ops;
|
|
|
|
struct dvb_frontend *tda10023_attach(const struct tda10023_config *config,
|
|
struct i2c_adapter *i2c,
|
|
u8 pwm)
|
|
{
|
|
struct tda10023_state* state = NULL;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
|
|
/* wakeup if in standby */
|
|
tda10023_writereg (state, 0x00, 0x33);
|
|
/* check if the demod is there */
|
|
if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops));
|
|
state->pwm = pwm;
|
|
state->reg0 = REG0_INIT_VAL;
|
|
if (state->config->xtal) {
|
|
state->xtal = state->config->xtal;
|
|
state->pll_m = state->config->pll_m;
|
|
state->pll_p = state->config->pll_p;
|
|
state->pll_n = state->config->pll_n;
|
|
} else {
|
|
/* set default values if not defined in config */
|
|
state->xtal = 28920000;
|
|
state->pll_m = 8;
|
|
state->pll_p = 4;
|
|
state->pll_n = 1;
|
|
}
|
|
|
|
/* calc sysclk */
|
|
state->sysclk = (state->xtal * state->pll_m / \
|
|
(state->pll_n * state->pll_p));
|
|
|
|
state->frontend.ops.info.symbol_rate_min = (state->sysclk/2)/64;
|
|
state->frontend.ops.info.symbol_rate_max = (state->sysclk/2)/4;
|
|
|
|
dprintk("DVB: TDA10023 %s: xtal:%d pll_m:%d pll_p:%d pll_n:%d\n",
|
|
__func__, state->xtal, state->pll_m, state->pll_p,
|
|
state->pll_n);
|
|
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops tda10023_ops = {
|
|
.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
|
|
.info = {
|
|
.name = "Philips TDA10023 DVB-C",
|
|
.frequency_min_hz = 47 * MHz,
|
|
.frequency_max_hz = 862 * MHz,
|
|
.frequency_stepsize_hz = 62500,
|
|
.symbol_rate_min = 0, /* set in tda10023_attach */
|
|
.symbol_rate_max = 0, /* set in tda10023_attach */
|
|
.caps = 0x400 | //FE_CAN_QAM_4
|
|
FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 | FE_CAN_QAM_256 |
|
|
FE_CAN_FEC_AUTO
|
|
},
|
|
|
|
.release = tda10023_release,
|
|
|
|
.init = tda10023_init,
|
|
.sleep = tda10023_sleep,
|
|
.i2c_gate_ctrl = tda10023_i2c_gate_ctrl,
|
|
|
|
.set_frontend = tda10023_set_parameters,
|
|
.get_frontend = tda10023_get_frontend,
|
|
.read_status = tda10023_read_status,
|
|
.read_ber = tda10023_read_ber,
|
|
.read_signal_strength = tda10023_read_signal_strength,
|
|
.read_snr = tda10023_read_snr,
|
|
.read_ucblocks = tda10023_read_ucblocks,
|
|
};
|
|
|
|
|
|
MODULE_DESCRIPTION("Philips TDA10023 DVB-C demodulator driver");
|
|
MODULE_AUTHOR("Georg Acher, Hartmut Birr");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL_GPL(tda10023_attach);
|