669 строки
17 KiB
C
669 строки
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
|
|
*
|
|
* Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
|
|
*
|
|
* Special thanks to Fintek for providing hardware and spec sheets.
|
|
* This driver is based upon the nuvoton, ite and ene drivers for
|
|
* similar hardware.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#include "fintek-cir.h"
|
|
|
|
/* write val to config reg */
|
|
static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg)
|
|
{
|
|
fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
|
|
__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
|
|
outb(reg, fintek->cr_ip);
|
|
outb(val, fintek->cr_dp);
|
|
}
|
|
|
|
/* read val from config reg */
|
|
static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg)
|
|
{
|
|
u8 val;
|
|
|
|
outb(reg, fintek->cr_ip);
|
|
val = inb(fintek->cr_dp);
|
|
|
|
fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
|
|
__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
|
|
return val;
|
|
}
|
|
|
|
/* update config register bit without changing other bits */
|
|
static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
|
|
{
|
|
u8 tmp = fintek_cr_read(fintek, reg) | val;
|
|
fintek_cr_write(fintek, tmp, reg);
|
|
}
|
|
|
|
/* enter config mode */
|
|
static inline void fintek_config_mode_enable(struct fintek_dev *fintek)
|
|
{
|
|
/* Enabling Config Mode explicitly requires writing 2x */
|
|
outb(CONFIG_REG_ENABLE, fintek->cr_ip);
|
|
outb(CONFIG_REG_ENABLE, fintek->cr_ip);
|
|
}
|
|
|
|
/* exit config mode */
|
|
static inline void fintek_config_mode_disable(struct fintek_dev *fintek)
|
|
{
|
|
outb(CONFIG_REG_DISABLE, fintek->cr_ip);
|
|
}
|
|
|
|
/*
|
|
* When you want to address a specific logical device, write its logical
|
|
* device number to GCR_LOGICAL_DEV_NO
|
|
*/
|
|
static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev)
|
|
{
|
|
fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO);
|
|
}
|
|
|
|
/* write val to cir config register */
|
|
static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset)
|
|
{
|
|
outb(val, fintek->cir_addr + offset);
|
|
}
|
|
|
|
/* read val from cir config register */
|
|
static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset)
|
|
{
|
|
return inb(fintek->cir_addr + offset);
|
|
}
|
|
|
|
/* dump current cir register contents */
|
|
static void cir_dump_regs(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
|
|
pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME);
|
|
pr_info(" * CR CIR BASE ADDR: 0x%x\n",
|
|
(fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) |
|
|
fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO));
|
|
pr_info(" * CR CIR IRQ NUM: 0x%x\n",
|
|
fintek_cr_read(fintek, CIR_CR_IRQ_SEL));
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME);
|
|
pr_info(" * STATUS: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_STATUS));
|
|
pr_info(" * CONTROL: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_CONTROL));
|
|
pr_info(" * RX_DATA: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_RX_DATA));
|
|
pr_info(" * TX_CONTROL: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_TX_CONTROL));
|
|
pr_info(" * TX_DATA: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_TX_DATA));
|
|
}
|
|
|
|
/* detect hardware features */
|
|
static int fintek_hw_detect(struct fintek_dev *fintek)
|
|
{
|
|
unsigned long flags;
|
|
u8 chip_major, chip_minor;
|
|
u8 vendor_major, vendor_minor;
|
|
u8 portsel, ir_class;
|
|
u16 vendor, chip;
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* Check if we're using config port 0x4e or 0x2e */
|
|
portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
|
|
if (portsel == 0xff) {
|
|
fit_pr(KERN_INFO, "first portsel read was bunk, trying alt");
|
|
fintek_config_mode_disable(fintek);
|
|
fintek->cr_ip = CR_INDEX_PORT2;
|
|
fintek->cr_dp = CR_DATA_PORT2;
|
|
fintek_config_mode_enable(fintek);
|
|
portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
|
|
}
|
|
fit_dbg("portsel reg: 0x%02x", portsel);
|
|
|
|
ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS);
|
|
fit_dbg("ir_class reg: 0x%02x", ir_class);
|
|
|
|
switch (ir_class) {
|
|
case CLASS_RX_2TX:
|
|
case CLASS_RX_1TX:
|
|
fintek->hw_tx_capable = true;
|
|
break;
|
|
case CLASS_RX_ONLY:
|
|
default:
|
|
fintek->hw_tx_capable = false;
|
|
break;
|
|
}
|
|
|
|
chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI);
|
|
chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO);
|
|
chip = chip_major << 8 | chip_minor;
|
|
|
|
vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI);
|
|
vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO);
|
|
vendor = vendor_major << 8 | vendor_minor;
|
|
|
|
if (vendor != VENDOR_ID_FINTEK)
|
|
fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor);
|
|
else
|
|
fit_dbg("Read Fintek vendor ID from chip");
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek->chip_major = chip_major;
|
|
fintek->chip_minor = chip_minor;
|
|
fintek->chip_vendor = vendor;
|
|
|
|
/*
|
|
* Newer reviews of this chipset uses port 8 instead of 5
|
|
*/
|
|
if ((chip != 0x0408) && (chip != 0x0804))
|
|
fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2;
|
|
else
|
|
fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1;
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_cir_ldev_init(struct fintek_dev *fintek)
|
|
{
|
|
/* Select CIR logical device and enable */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
/* Write allocated CIR address and IRQ information to hardware */
|
|
fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI);
|
|
fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO);
|
|
|
|
fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL);
|
|
|
|
fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)",
|
|
fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len);
|
|
}
|
|
|
|
/* enable CIR interrupts */
|
|
static void fintek_enable_cir_irq(struct fintek_dev *fintek)
|
|
{
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
|
|
}
|
|
|
|
static void fintek_cir_regs_init(struct fintek_dev *fintek)
|
|
{
|
|
/* clear any and all stray interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
/* and finally, enable interrupts */
|
|
fintek_enable_cir_irq(fintek);
|
|
}
|
|
|
|
static void fintek_enable_wake(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI);
|
|
|
|
/* Allow CIR PME's to wake system */
|
|
fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG);
|
|
/* Enable CIR PME's */
|
|
fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG);
|
|
/* Clear CIR PME status register */
|
|
fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG);
|
|
/* Save state */
|
|
fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
}
|
|
|
|
static int fintek_cmdsize(u8 cmd, u8 subcmd)
|
|
{
|
|
int datasize = 0;
|
|
|
|
switch (cmd) {
|
|
case BUF_COMMAND_NULL:
|
|
if (subcmd == BUF_HW_CMD_HEADER)
|
|
datasize = 1;
|
|
break;
|
|
case BUF_HW_CMD_HEADER:
|
|
if (subcmd == BUF_CMD_G_REVISION)
|
|
datasize = 2;
|
|
break;
|
|
case BUF_COMMAND_HEADER:
|
|
switch (subcmd) {
|
|
case BUF_CMD_S_CARRIER:
|
|
case BUF_CMD_S_TIMEOUT:
|
|
case BUF_RSP_PULSE_COUNT:
|
|
datasize = 2;
|
|
break;
|
|
case BUF_CMD_SIG_END:
|
|
case BUF_CMD_S_TXMASK:
|
|
case BUF_CMD_S_RXSENSOR:
|
|
datasize = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return datasize;
|
|
}
|
|
|
|
/* process ir data stored in driver buffer */
|
|
static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
|
|
{
|
|
struct ir_raw_event rawir = {};
|
|
u8 sample;
|
|
bool event = false;
|
|
int i;
|
|
|
|
for (i = 0; i < fintek->pkts; i++) {
|
|
sample = fintek->buf[i];
|
|
switch (fintek->parser_state) {
|
|
case CMD_HEADER:
|
|
fintek->cmd = sample;
|
|
if ((fintek->cmd == BUF_COMMAND_HEADER) ||
|
|
((fintek->cmd & BUF_COMMAND_MASK) !=
|
|
BUF_PULSE_BIT)) {
|
|
fintek->parser_state = SUBCMD;
|
|
continue;
|
|
}
|
|
fintek->rem = (fintek->cmd & BUF_LEN_MASK);
|
|
fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem);
|
|
if (fintek->rem)
|
|
fintek->parser_state = PARSE_IRDATA;
|
|
else
|
|
ir_raw_event_reset(fintek->rdev);
|
|
break;
|
|
case SUBCMD:
|
|
fintek->rem = fintek_cmdsize(fintek->cmd, sample);
|
|
fintek->parser_state = CMD_DATA;
|
|
break;
|
|
case CMD_DATA:
|
|
fintek->rem--;
|
|
break;
|
|
case PARSE_IRDATA:
|
|
fintek->rem--;
|
|
rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
|
|
rawir.duration = (sample & BUF_SAMPLE_MASK)
|
|
* CIR_SAMPLE_PERIOD;
|
|
|
|
fit_dbg("Storing %s with duration %d",
|
|
rawir.pulse ? "pulse" : "space",
|
|
rawir.duration);
|
|
if (ir_raw_event_store_with_filter(fintek->rdev,
|
|
&rawir))
|
|
event = true;
|
|
break;
|
|
}
|
|
|
|
if ((fintek->parser_state != CMD_HEADER) && !fintek->rem)
|
|
fintek->parser_state = CMD_HEADER;
|
|
}
|
|
|
|
fintek->pkts = 0;
|
|
|
|
if (event) {
|
|
fit_dbg("Calling ir_raw_event_handle");
|
|
ir_raw_event_handle(fintek->rdev);
|
|
}
|
|
}
|
|
|
|
/* copy data from hardware rx register into driver buffer */
|
|
static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs)
|
|
{
|
|
unsigned long flags;
|
|
u8 sample, status;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
|
|
/*
|
|
* We must read data from CIR_RX_DATA until the hardware IR buffer
|
|
* is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in
|
|
* the CIR_STATUS register
|
|
*/
|
|
do {
|
|
sample = fintek_cir_reg_read(fintek, CIR_RX_DATA);
|
|
fit_dbg("%s: sample: 0x%02x", __func__, sample);
|
|
|
|
fintek->buf[fintek->pkts] = sample;
|
|
fintek->pkts++;
|
|
|
|
status = fintek_cir_reg_read(fintek, CIR_STATUS);
|
|
if (!(status & CIR_STATUS_IRQ_EN))
|
|
break;
|
|
} while (status & rx_irqs);
|
|
|
|
fintek_process_rx_ir_data(fintek);
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
}
|
|
|
|
static void fintek_cir_log_irqs(u8 status)
|
|
{
|
|
fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status,
|
|
status & CIR_STATUS_IRQ_EN ? " IRQEN" : "",
|
|
status & CIR_STATUS_TX_FINISH ? " TXF" : "",
|
|
status & CIR_STATUS_TX_UNDERRUN ? " TXU" : "",
|
|
status & CIR_STATUS_RX_TIMEOUT ? " RXTO" : "",
|
|
status & CIR_STATUS_RX_RECEIVE ? " RXOK" : "");
|
|
}
|
|
|
|
/* interrupt service routine for incoming and outgoing CIR data */
|
|
static irqreturn_t fintek_cir_isr(int irq, void *data)
|
|
{
|
|
struct fintek_dev *fintek = data;
|
|
u8 status, rx_irqs;
|
|
|
|
fit_dbg_verbose("%s firing", __func__);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/*
|
|
* Get IR Status register contents. Write 1 to ack/clear
|
|
*
|
|
* bit: reg name - description
|
|
* 3: TX_FINISH - TX is finished
|
|
* 2: TX_UNDERRUN - TX underrun
|
|
* 1: RX_TIMEOUT - RX data timeout
|
|
* 0: RX_RECEIVE - RX data received
|
|
*/
|
|
status = fintek_cir_reg_read(fintek, CIR_STATUS);
|
|
if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) {
|
|
fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status);
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
return IRQ_RETVAL(IRQ_NONE);
|
|
}
|
|
|
|
if (debug)
|
|
fintek_cir_log_irqs(status);
|
|
|
|
rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT);
|
|
if (rx_irqs)
|
|
fintek_get_rx_ir_data(fintek, rx_irqs);
|
|
|
|
/* ack/clear all irq flags we've got */
|
|
fintek_cir_reg_write(fintek, status, CIR_STATUS);
|
|
|
|
fit_dbg_verbose("%s done", __func__);
|
|
return IRQ_RETVAL(IRQ_HANDLED);
|
|
}
|
|
|
|
static void fintek_enable_cir(struct fintek_dev *fintek)
|
|
{
|
|
/* set IRQ enabled */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* enable the CIR logical device */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* clear all pending interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
/* enable interrupts */
|
|
fintek_enable_cir_irq(fintek);
|
|
}
|
|
|
|
static void fintek_disable_cir(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* disable the CIR logical device */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
}
|
|
|
|
static int fintek_open(struct rc_dev *dev)
|
|
{
|
|
struct fintek_dev *fintek = dev->priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek_enable_cir(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_close(struct rc_dev *dev)
|
|
{
|
|
struct fintek_dev *fintek = dev->priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek_disable_cir(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
}
|
|
|
|
/* Allocate memory, probe hardware, and initialize everything */
|
|
static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
|
|
{
|
|
struct fintek_dev *fintek;
|
|
struct rc_dev *rdev;
|
|
int ret = -ENOMEM;
|
|
|
|
fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL);
|
|
if (!fintek)
|
|
return ret;
|
|
|
|
/* input device for IR remote (and tx) */
|
|
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!rdev)
|
|
goto exit_free_dev_rdev;
|
|
|
|
ret = -ENODEV;
|
|
/* validate pnp resources */
|
|
if (!pnp_port_valid(pdev, 0)) {
|
|
dev_err(&pdev->dev, "IR PNP Port not valid!\n");
|
|
goto exit_free_dev_rdev;
|
|
}
|
|
|
|
if (!pnp_irq_valid(pdev, 0)) {
|
|
dev_err(&pdev->dev, "IR PNP IRQ not valid!\n");
|
|
goto exit_free_dev_rdev;
|
|
}
|
|
|
|
fintek->cir_addr = pnp_port_start(pdev, 0);
|
|
fintek->cir_irq = pnp_irq(pdev, 0);
|
|
fintek->cir_port_len = pnp_port_len(pdev, 0);
|
|
|
|
fintek->cr_ip = CR_INDEX_PORT;
|
|
fintek->cr_dp = CR_DATA_PORT;
|
|
|
|
spin_lock_init(&fintek->fintek_lock);
|
|
|
|
pnp_set_drvdata(pdev, fintek);
|
|
fintek->pdev = pdev;
|
|
|
|
ret = fintek_hw_detect(fintek);
|
|
if (ret)
|
|
goto exit_free_dev_rdev;
|
|
|
|
/* Initialize CIR & CIR Wake Logical Devices */
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_cir_ldev_init(fintek);
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* Initialize CIR & CIR Wake Config Registers */
|
|
fintek_cir_regs_init(fintek);
|
|
|
|
/* Set up the rc device */
|
|
rdev->priv = fintek;
|
|
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rdev->open = fintek_open;
|
|
rdev->close = fintek_close;
|
|
rdev->device_name = FINTEK_DESCRIPTION;
|
|
rdev->input_phys = "fintek/cir0";
|
|
rdev->input_id.bustype = BUS_HOST;
|
|
rdev->input_id.vendor = VENDOR_ID_FINTEK;
|
|
rdev->input_id.product = fintek->chip_major;
|
|
rdev->input_id.version = fintek->chip_minor;
|
|
rdev->dev.parent = &pdev->dev;
|
|
rdev->driver_name = FINTEK_DRIVER_NAME;
|
|
rdev->map_name = RC_MAP_RC6_MCE;
|
|
rdev->timeout = 1000;
|
|
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
|
|
rdev->rx_resolution = CIR_SAMPLE_PERIOD;
|
|
|
|
fintek->rdev = rdev;
|
|
|
|
ret = -EBUSY;
|
|
/* now claim resources */
|
|
if (!request_region(fintek->cir_addr,
|
|
fintek->cir_port_len, FINTEK_DRIVER_NAME))
|
|
goto exit_free_dev_rdev;
|
|
|
|
if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
|
|
FINTEK_DRIVER_NAME, (void *)fintek))
|
|
goto exit_free_cir_addr;
|
|
|
|
ret = rc_register_device(rdev);
|
|
if (ret)
|
|
goto exit_free_irq;
|
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");
|
|
if (debug)
|
|
cir_dump_regs(fintek);
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
free_irq(fintek->cir_irq, fintek);
|
|
exit_free_cir_addr:
|
|
release_region(fintek->cir_addr, fintek->cir_port_len);
|
|
exit_free_dev_rdev:
|
|
rc_free_device(rdev);
|
|
kfree(fintek);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fintek_remove(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
/* disable CIR */
|
|
fintek_disable_cir(fintek);
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
/* enable CIR Wake (for IR power-on) */
|
|
fintek_enable_wake(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
/* free resources */
|
|
free_irq(fintek->cir_irq, fintek);
|
|
release_region(fintek->cir_addr, fintek->cir_port_len);
|
|
|
|
rc_unregister_device(fintek->rdev);
|
|
|
|
kfree(fintek);
|
|
}
|
|
|
|
static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
fit_dbg("%s called", __func__);
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
|
|
/* disable all CIR interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* disable cir logical dev */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* make sure wake is enabled */
|
|
fintek_enable_wake(fintek);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fintek_resume(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
|
|
fit_dbg("%s called", __func__);
|
|
|
|
/* open interrupt */
|
|
fintek_enable_cir_irq(fintek);
|
|
|
|
/* Enable CIR logical device */
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
fintek_cir_regs_init(fintek);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_shutdown(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
fintek_enable_wake(fintek);
|
|
}
|
|
|
|
static const struct pnp_device_id fintek_ids[] = {
|
|
{ "FIT0002", 0 }, /* CIR */
|
|
{ "", 0 },
|
|
};
|
|
|
|
static struct pnp_driver fintek_driver = {
|
|
.name = FINTEK_DRIVER_NAME,
|
|
.id_table = fintek_ids,
|
|
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
|
|
.probe = fintek_probe,
|
|
.remove = fintek_remove,
|
|
.suspend = fintek_suspend,
|
|
.resume = fintek_resume,
|
|
.shutdown = fintek_shutdown,
|
|
};
|
|
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Enable debugging output");
|
|
|
|
MODULE_DEVICE_TABLE(pnp, fintek_ids);
|
|
MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver");
|
|
|
|
MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_pnp_driver(fintek_driver);
|