409 строки
9.7 KiB
C
409 строки
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2014 Linaro Ltd.
|
|
* Copyright (c) 2014 HiSilicon Limited.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define IR_ENABLE 0x00
|
|
#define IR_CONFIG 0x04
|
|
#define CNT_LEADS 0x08
|
|
#define CNT_LEADE 0x0c
|
|
#define CNT_SLEADE 0x10
|
|
#define CNT0_B 0x14
|
|
#define CNT1_B 0x18
|
|
#define IR_BUSY 0x1c
|
|
#define IR_DATAH 0x20
|
|
#define IR_DATAL 0x24
|
|
#define IR_INTM 0x28
|
|
#define IR_INTS 0x2c
|
|
#define IR_INTC 0x30
|
|
#define IR_START 0x34
|
|
|
|
/* interrupt mask */
|
|
#define INTMS_SYMBRCV (BIT(24) | BIT(8))
|
|
#define INTMS_TIMEOUT (BIT(25) | BIT(9))
|
|
#define INTMS_OVERFLOW (BIT(26) | BIT(10))
|
|
#define INT_CLR_OVERFLOW BIT(18)
|
|
#define INT_CLR_TIMEOUT BIT(17)
|
|
#define INT_CLR_RCV BIT(16)
|
|
#define INT_CLR_RCVTIMEOUT (BIT(16) | BIT(17))
|
|
|
|
#define IR_CLK_ENABLE BIT(4)
|
|
#define IR_CLK_RESET BIT(5)
|
|
|
|
/* IR_ENABLE register bits */
|
|
#define IR_ENABLE_EN BIT(0)
|
|
#define IR_ENABLE_EN_EXTRA BIT(8)
|
|
|
|
#define IR_CFG_WIDTH_MASK 0xffff
|
|
#define IR_CFG_WIDTH_SHIFT 16
|
|
#define IR_CFG_FORMAT_MASK 0x3
|
|
#define IR_CFG_FORMAT_SHIFT 14
|
|
#define IR_CFG_INT_LEVEL_MASK 0x3f
|
|
#define IR_CFG_INT_LEVEL_SHIFT 8
|
|
/* only support raw mode */
|
|
#define IR_CFG_MODE_RAW BIT(7)
|
|
#define IR_CFG_FREQ_MASK 0x7f
|
|
#define IR_CFG_FREQ_SHIFT 0
|
|
#define IR_CFG_INT_THRESHOLD 1
|
|
/* symbol start from low to high, symbol stream end at high*/
|
|
#define IR_CFG_SYMBOL_FMT 0
|
|
#define IR_CFG_SYMBOL_MAXWIDTH 0x3e80
|
|
|
|
#define IR_HIX5HD2_NAME "hix5hd2-ir"
|
|
|
|
/* Need to set extra bit for enabling IR */
|
|
#define HIX5HD2_FLAG_EXTRA_ENABLE BIT(0)
|
|
|
|
struct hix5hd2_soc_data {
|
|
u32 clk_reg;
|
|
u32 flags;
|
|
};
|
|
|
|
static const struct hix5hd2_soc_data hix5hd2_data = {
|
|
.clk_reg = 0x48,
|
|
};
|
|
|
|
static const struct hix5hd2_soc_data hi3796cv300_data = {
|
|
.clk_reg = 0x60,
|
|
.flags = HIX5HD2_FLAG_EXTRA_ENABLE,
|
|
};
|
|
|
|
struct hix5hd2_ir_priv {
|
|
int irq;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct rc_dev *rdev;
|
|
struct regmap *regmap;
|
|
struct clk *clock;
|
|
unsigned long rate;
|
|
const struct hix5hd2_soc_data *socdata;
|
|
};
|
|
|
|
static int hix5hd2_ir_clk_enable(struct hix5hd2_ir_priv *dev, bool on)
|
|
{
|
|
u32 clk_reg = dev->socdata->clk_reg;
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
if (dev->regmap) {
|
|
regmap_read(dev->regmap, clk_reg, &val);
|
|
if (on) {
|
|
val &= ~IR_CLK_RESET;
|
|
val |= IR_CLK_ENABLE;
|
|
} else {
|
|
val &= ~IR_CLK_ENABLE;
|
|
val |= IR_CLK_RESET;
|
|
}
|
|
regmap_write(dev->regmap, clk_reg, val);
|
|
} else {
|
|
if (on)
|
|
ret = clk_prepare_enable(dev->clock);
|
|
else
|
|
clk_disable_unprepare(dev->clock);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static inline void hix5hd2_ir_enable(struct hix5hd2_ir_priv *priv)
|
|
{
|
|
u32 val = IR_ENABLE_EN;
|
|
|
|
if (priv->socdata->flags & HIX5HD2_FLAG_EXTRA_ENABLE)
|
|
val |= IR_ENABLE_EN_EXTRA;
|
|
|
|
writel_relaxed(val, priv->base + IR_ENABLE);
|
|
}
|
|
|
|
static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
|
|
{
|
|
int timeout = 10000;
|
|
u32 val, rate;
|
|
|
|
hix5hd2_ir_enable(priv);
|
|
|
|
while (readl_relaxed(priv->base + IR_BUSY)) {
|
|
if (timeout--) {
|
|
udelay(1);
|
|
} else {
|
|
dev_err(priv->dev, "IR_BUSY timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
/* Now only support raw mode, with symbol start from low to high */
|
|
rate = DIV_ROUND_CLOSEST(priv->rate, 1000000);
|
|
val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT;
|
|
val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT;
|
|
val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK
|
|
<< IR_CFG_INT_LEVEL_SHIFT;
|
|
val |= IR_CFG_MODE_RAW;
|
|
val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT;
|
|
writel_relaxed(val, priv->base + IR_CONFIG);
|
|
|
|
writel_relaxed(0x00, priv->base + IR_INTM);
|
|
/* write arbitrary value to start */
|
|
writel_relaxed(0x01, priv->base + IR_START);
|
|
return 0;
|
|
}
|
|
|
|
static int hix5hd2_ir_open(struct rc_dev *rdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = rdev->priv;
|
|
int ret;
|
|
|
|
ret = hix5hd2_ir_clk_enable(priv, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hix5hd2_ir_config(priv);
|
|
if (ret) {
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void hix5hd2_ir_close(struct rc_dev *rdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = rdev->priv;
|
|
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
}
|
|
|
|
static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
|
|
{
|
|
u32 symb_num, symb_val, symb_time;
|
|
u32 data_l, data_h;
|
|
u32 irq_sr, i;
|
|
struct hix5hd2_ir_priv *priv = data;
|
|
|
|
irq_sr = readl_relaxed(priv->base + IR_INTS);
|
|
if (irq_sr & INTMS_OVERFLOW) {
|
|
/*
|
|
* we must read IR_DATAL first, then we can clean up
|
|
* IR_INTS availably since logic would not clear
|
|
* fifo when overflow, drv do the job
|
|
*/
|
|
ir_raw_event_reset(priv->rdev);
|
|
symb_num = readl_relaxed(priv->base + IR_DATAH);
|
|
for (i = 0; i < symb_num; i++)
|
|
readl_relaxed(priv->base + IR_DATAL);
|
|
|
|
writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC);
|
|
dev_info(priv->dev, "overflow, level=%d\n",
|
|
IR_CFG_INT_THRESHOLD);
|
|
}
|
|
|
|
if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) {
|
|
struct ir_raw_event ev = {};
|
|
|
|
symb_num = readl_relaxed(priv->base + IR_DATAH);
|
|
for (i = 0; i < symb_num; i++) {
|
|
symb_val = readl_relaxed(priv->base + IR_DATAL);
|
|
data_l = ((symb_val & 0xffff) * 10);
|
|
data_h = ((symb_val >> 16) & 0xffff) * 10;
|
|
symb_time = (data_l + data_h) / 10;
|
|
|
|
ev.duration = data_l;
|
|
ev.pulse = true;
|
|
ir_raw_event_store(priv->rdev, &ev);
|
|
|
|
if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
|
|
ev.duration = data_h;
|
|
ev.pulse = false;
|
|
ir_raw_event_store(priv->rdev, &ev);
|
|
} else {
|
|
ir_raw_event_set_idle(priv->rdev, true);
|
|
}
|
|
}
|
|
|
|
if (irq_sr & INTMS_SYMBRCV)
|
|
writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC);
|
|
if (irq_sr & INTMS_TIMEOUT)
|
|
writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC);
|
|
}
|
|
|
|
/* Empty software fifo */
|
|
ir_raw_event_handle(priv->rdev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct of_device_id hix5hd2_ir_table[] = {
|
|
{ .compatible = "hisilicon,hix5hd2-ir", &hix5hd2_data, },
|
|
{ .compatible = "hisilicon,hi3796cv300-ir", &hi3796cv300_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
|
|
|
|
static int hix5hd2_ir_probe(struct platform_device *pdev)
|
|
{
|
|
struct rc_dev *rdev;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct hix5hd2_ir_priv *priv;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *of_id;
|
|
const char *map_name;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(hix5hd2_ir_table, dev);
|
|
if (!of_id) {
|
|
dev_err(dev, "Unable to initialize IR data\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->socdata = of_id->data;
|
|
|
|
priv->regmap = syscon_regmap_lookup_by_phandle(node,
|
|
"hisilicon,power-syscon");
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_info(dev, "no power-reg\n");
|
|
priv->regmap = NULL;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq < 0)
|
|
return priv->irq;
|
|
|
|
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!rdev)
|
|
return -ENOMEM;
|
|
|
|
priv->clock = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clock)) {
|
|
dev_err(dev, "clock not found\n");
|
|
ret = PTR_ERR(priv->clock);
|
|
goto err;
|
|
}
|
|
ret = clk_prepare_enable(priv->clock);
|
|
if (ret)
|
|
goto err;
|
|
priv->rate = clk_get_rate(priv->clock);
|
|
|
|
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rdev->priv = priv;
|
|
rdev->open = hix5hd2_ir_open;
|
|
rdev->close = hix5hd2_ir_close;
|
|
rdev->driver_name = IR_HIX5HD2_NAME;
|
|
map_name = of_get_property(node, "linux,rc-map-name", NULL);
|
|
rdev->map_name = map_name ?: RC_MAP_EMPTY;
|
|
rdev->device_name = IR_HIX5HD2_NAME;
|
|
rdev->input_phys = IR_HIX5HD2_NAME "/input0";
|
|
rdev->input_id.bustype = BUS_HOST;
|
|
rdev->input_id.vendor = 0x0001;
|
|
rdev->input_id.product = 0x0001;
|
|
rdev->input_id.version = 0x0100;
|
|
rdev->rx_resolution = 10;
|
|
rdev->timeout = IR_CFG_SYMBOL_MAXWIDTH * 10;
|
|
|
|
ret = rc_register_device(rdev);
|
|
if (ret < 0)
|
|
goto clkerr;
|
|
|
|
if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
|
|
0, pdev->name, priv) < 0) {
|
|
dev_err(dev, "IRQ %d register failed\n", priv->irq);
|
|
ret = -EINVAL;
|
|
goto regerr;
|
|
}
|
|
|
|
priv->rdev = rdev;
|
|
priv->dev = dev;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return ret;
|
|
|
|
regerr:
|
|
rc_unregister_device(rdev);
|
|
rdev = NULL;
|
|
clkerr:
|
|
clk_disable_unprepare(priv->clock);
|
|
err:
|
|
rc_free_device(rdev);
|
|
dev_err(dev, "Unable to register device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hix5hd2_ir_remove(struct platform_device *pdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(priv->clock);
|
|
rc_unregister_device(priv->rdev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int hix5hd2_ir_suspend(struct device *dev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(priv->clock);
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hix5hd2_ir_resume(struct device *dev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = hix5hd2_ir_clk_enable(priv, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(priv->clock);
|
|
if (ret) {
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
return ret;
|
|
}
|
|
|
|
hix5hd2_ir_enable(priv);
|
|
|
|
writel_relaxed(0x00, priv->base + IR_INTM);
|
|
writel_relaxed(0xff, priv->base + IR_INTC);
|
|
writel_relaxed(0x01, priv->base + IR_START);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
|
|
hix5hd2_ir_resume);
|
|
|
|
static struct platform_driver hix5hd2_ir_driver = {
|
|
.driver = {
|
|
.name = IR_HIX5HD2_NAME,
|
|
.of_match_table = hix5hd2_ir_table,
|
|
.pm = &hix5hd2_ir_pm_ops,
|
|
},
|
|
.probe = hix5hd2_ir_probe,
|
|
.remove = hix5hd2_ir_remove,
|
|
};
|
|
|
|
module_platform_driver(hix5hd2_ir_driver);
|
|
|
|
MODULE_DESCRIPTION("IR controller driver for hix5hd2 platforms");
|
|
MODULE_AUTHOR("Guoxiong Yan <yanguoxiong@huawei.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:hix5hd2-ir");
|