154 строки
5.0 KiB
C
154 строки
5.0 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/* Copyright 2021 NXP
|
|
*
|
|
* The Integrated Endpoint Register Block (IERB) is configured by pre-boot
|
|
* software and is supposed to be to ENETC what a NVRAM is to a 'real' PCIe
|
|
* card. Upon FLR, values from the IERB are transferred to the ENETC PFs, and
|
|
* are read-only in the PF memory space.
|
|
*
|
|
* This driver fixes up the power-on reset values for the ENETC shared FIFO,
|
|
* such that the TX and RX allocations are sufficient for jumbo frames, and
|
|
* that intelligent FIFO dropping is enabled before the internal data
|
|
* structures are corrupted.
|
|
*
|
|
* Even though not all ports might be used on a given board, we are not
|
|
* concerned with partitioning the FIFO, because the default values configure
|
|
* no strict reservations, so the entire FIFO can be used by the RX of a single
|
|
* port, or the TX of a single port.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include "enetc.h"
|
|
#include "enetc_ierb.h"
|
|
|
|
/* IERB registers */
|
|
#define ENETC_IERB_TXMBAR(port) (((port) * 0x100) + 0x8080)
|
|
#define ENETC_IERB_RXMBER(port) (((port) * 0x100) + 0x8090)
|
|
#define ENETC_IERB_RXMBLR(port) (((port) * 0x100) + 0x8094)
|
|
#define ENETC_IERB_RXBCR(port) (((port) * 0x100) + 0x80a0)
|
|
#define ENETC_IERB_TXBCR(port) (((port) * 0x100) + 0x80a8)
|
|
#define ENETC_IERB_FMBDTR 0xa000
|
|
|
|
#define ENETC_RESERVED_FOR_ICM 1024
|
|
|
|
struct enetc_ierb {
|
|
void __iomem *regs;
|
|
};
|
|
|
|
static void enetc_ierb_write(struct enetc_ierb *ierb, u32 offset, u32 val)
|
|
{
|
|
iowrite32(val, ierb->regs + offset);
|
|
}
|
|
|
|
int enetc_ierb_register_pf(struct platform_device *pdev,
|
|
struct pci_dev *pf_pdev)
|
|
{
|
|
struct enetc_ierb *ierb = platform_get_drvdata(pdev);
|
|
int port = enetc_pf_to_port(pf_pdev);
|
|
u16 tx_credit, rx_credit, tx_alloc;
|
|
|
|
if (port < 0)
|
|
return -ENODEV;
|
|
|
|
if (!ierb)
|
|
return -EPROBE_DEFER;
|
|
|
|
/* By default, it is recommended to set the Host Transfer Agent
|
|
* per port transmit byte credit to "1000 + max_frame_size/2".
|
|
* The power-on reset value (1800 bytes) is rounded up to the nearest
|
|
* 100 assuming a maximum frame size of 1536 bytes.
|
|
*/
|
|
tx_credit = roundup(1000 + ENETC_MAC_MAXFRM_SIZE / 2, 100);
|
|
|
|
/* Internal memory allocated for transmit buffering is guaranteed but
|
|
* not reserved; i.e. if the total transmit allocation is not used,
|
|
* then the unused portion is not left idle, it can be used for receive
|
|
* buffering but it will be reclaimed, if required, from receive by
|
|
* intelligently dropping already stored receive frames in the internal
|
|
* memory to ensure that the transmit allocation is respected.
|
|
*
|
|
* PaTXMBAR must be set to a value larger than
|
|
* PaTXBCR + 2 * max_frame_size + 32
|
|
* if frame preemption is not enabled, or to
|
|
* 2 * PaTXBCR + 2 * p_max_frame_size (pMAC maximum frame size) +
|
|
* 2 * np_max_frame_size (eMAC maximum frame size) + 64
|
|
* if frame preemption is enabled.
|
|
*/
|
|
tx_alloc = roundup(2 * tx_credit + 4 * ENETC_MAC_MAXFRM_SIZE + 64, 16);
|
|
|
|
/* Initial credits, in units of 8 bytes, to the Ingress Congestion
|
|
* Manager for the maximum amount of bytes the port is allocated for
|
|
* pending traffic.
|
|
* It is recommended to set the initial credits to 2 times the maximum
|
|
* frame size (2 frames of maximum size).
|
|
*/
|
|
rx_credit = DIV_ROUND_UP(ENETC_MAC_MAXFRM_SIZE * 2, 8);
|
|
|
|
enetc_ierb_write(ierb, ENETC_IERB_TXBCR(port), tx_credit);
|
|
enetc_ierb_write(ierb, ENETC_IERB_TXMBAR(port), tx_alloc);
|
|
enetc_ierb_write(ierb, ENETC_IERB_RXBCR(port), rx_credit);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(enetc_ierb_register_pf);
|
|
|
|
static int enetc_ierb_probe(struct platform_device *pdev)
|
|
{
|
|
struct enetc_ierb *ierb;
|
|
void __iomem *regs;
|
|
|
|
ierb = devm_kzalloc(&pdev->dev, sizeof(*ierb), GFP_KERNEL);
|
|
if (!ierb)
|
|
return -ENOMEM;
|
|
|
|
regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
ierb->regs = regs;
|
|
|
|
/* Free buffer depletion threshold in bytes.
|
|
* This sets the minimum amount of free buffer memory that should be
|
|
* maintained in the datapath sub system, and when the amount of free
|
|
* buffer memory falls below this threshold, a depletion indication is
|
|
* asserted, which may trigger "intelligent drop" frame releases from
|
|
* the ingress queues in the ICM.
|
|
* It is recommended to set the free buffer depletion threshold to 1024
|
|
* bytes, since the ICM needs some FIFO memory for its own use.
|
|
*/
|
|
enetc_ierb_write(ierb, ENETC_IERB_FMBDTR, ENETC_RESERVED_FOR_ICM);
|
|
|
|
platform_set_drvdata(pdev, ierb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int enetc_ierb_remove(struct platform_device *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id enetc_ierb_match[] = {
|
|
{ .compatible = "fsl,ls1028a-enetc-ierb", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, enetc_ierb_match);
|
|
|
|
static struct platform_driver enetc_ierb_driver = {
|
|
.driver = {
|
|
.name = "fsl-enetc-ierb",
|
|
.of_match_table = enetc_ierb_match,
|
|
},
|
|
.probe = enetc_ierb_probe,
|
|
.remove = enetc_ierb_remove,
|
|
};
|
|
|
|
module_platform_driver(enetc_ierb_driver);
|
|
|
|
MODULE_DESCRIPTION("NXP ENETC IERB");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|