272 строки
6.3 KiB
C
272 строки
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* MCP23S08 SPI GPIO driver */
|
|
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include "pinctrl-mcp23s08.h"
|
|
|
|
#define MCP_MAX_DEV_PER_CS 8
|
|
|
|
/*
|
|
* A given spi_device can represent up to eight mcp23sxx chips
|
|
* sharing the same chipselect but using different addresses
|
|
* (e.g. chips #0 and #3 might be populated, but not #1 or #2).
|
|
* Driver data holds all the per-chip data.
|
|
*/
|
|
struct mcp23s08_driver_data {
|
|
unsigned ngpio;
|
|
struct mcp23s08 *mcp[8];
|
|
struct mcp23s08 chip[];
|
|
};
|
|
|
|
static int mcp23sxx_spi_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
struct spi_message m;
|
|
struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, },
|
|
{ .tx_buf = data, .len = count, }, };
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
return spi_sync(spi, &m);
|
|
}
|
|
|
|
static int mcp23sxx_spi_gather_write(void *context,
|
|
const void *reg, size_t reg_size,
|
|
const void *val, size_t val_size)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
struct spi_message m;
|
|
struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, },
|
|
{ .tx_buf = reg, .len = reg_size, },
|
|
{ .tx_buf = val, .len = val_size, }, };
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
spi_message_add_tail(&t[2], &m);
|
|
|
|
return spi_sync(spi, &m);
|
|
}
|
|
|
|
static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size,
|
|
void *val, size_t val_size)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
u8 tx[2];
|
|
|
|
if (reg_size != 1)
|
|
return -EINVAL;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = *((u8 *) reg);
|
|
|
|
return spi_write_then_read(spi, tx, sizeof(tx), val, val_size);
|
|
}
|
|
|
|
static const struct regmap_bus mcp23sxx_spi_regmap = {
|
|
.write = mcp23sxx_spi_write,
|
|
.gather_write = mcp23sxx_spi_gather_write,
|
|
.read = mcp23sxx_spi_read,
|
|
};
|
|
|
|
static int mcp23s08_spi_regmap_init(struct mcp23s08 *mcp, struct device *dev,
|
|
unsigned int addr, unsigned int type)
|
|
{
|
|
const struct regmap_config *config;
|
|
struct regmap_config *copy;
|
|
const char *name;
|
|
|
|
switch (type) {
|
|
case MCP_TYPE_S08:
|
|
mcp->reg_shift = 0;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s08.%d", addr);
|
|
if (!mcp->chip.label)
|
|
return -ENOMEM;
|
|
|
|
config = &mcp23x08_regmap;
|
|
name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
break;
|
|
|
|
case MCP_TYPE_S17:
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s17.%d", addr);
|
|
if (!mcp->chip.label)
|
|
return -ENOMEM;
|
|
|
|
config = &mcp23x17_regmap;
|
|
name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
break;
|
|
|
|
case MCP_TYPE_S18:
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23s18";
|
|
|
|
config = &mcp23x17_regmap;
|
|
name = config->name;
|
|
break;
|
|
|
|
default:
|
|
dev_err(dev, "invalid device type (%d)\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
copy = devm_kmemdup(dev, config, sizeof(*config), GFP_KERNEL);
|
|
if (!copy)
|
|
return -ENOMEM;
|
|
|
|
copy->name = name;
|
|
|
|
mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, copy);
|
|
if (IS_ERR(mcp->regmap))
|
|
dev_err(dev, "regmap init failed for %s\n", mcp->chip.label);
|
|
return PTR_ERR_OR_ZERO(mcp->regmap);
|
|
}
|
|
|
|
static int mcp23s08_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct mcp23s08_driver_data *data;
|
|
unsigned long spi_present_mask;
|
|
const void *match;
|
|
unsigned int addr;
|
|
unsigned int ngpio = 0;
|
|
int chips;
|
|
int type;
|
|
int ret;
|
|
u32 v;
|
|
|
|
match = device_get_match_data(dev);
|
|
if (match)
|
|
type = (int)(uintptr_t)match;
|
|
else
|
|
type = spi_get_device_id(spi)->driver_data;
|
|
|
|
ret = device_property_read_u32(dev, "microchip,spi-present-mask", &v);
|
|
if (ret) {
|
|
ret = device_property_read_u32(dev, "mcp,spi-present-mask", &v);
|
|
if (ret) {
|
|
dev_err(dev, "missing spi-present-mask");
|
|
return ret;
|
|
}
|
|
}
|
|
spi_present_mask = v;
|
|
|
|
if (!spi_present_mask || spi_present_mask >= BIT(MCP_MAX_DEV_PER_CS)) {
|
|
dev_err(dev, "invalid spi-present-mask");
|
|
return -ENODEV;
|
|
}
|
|
|
|
chips = hweight_long(spi_present_mask);
|
|
|
|
data = devm_kzalloc(dev, struct_size(data, chip, chips), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, data);
|
|
|
|
for_each_set_bit(addr, &spi_present_mask, MCP_MAX_DEV_PER_CS) {
|
|
data->mcp[addr] = &data->chip[--chips];
|
|
data->mcp[addr]->irq = spi->irq;
|
|
|
|
ret = mcp23s08_spi_regmap_init(data->mcp[addr], dev, addr, type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->mcp[addr]->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL,
|
|
"mcp23xxx-pinctrl.%d",
|
|
addr);
|
|
if (!data->mcp[addr]->pinctrl_desc.name)
|
|
return -ENOMEM;
|
|
|
|
ret = mcp23s08_probe_one(data->mcp[addr], dev, 0x40 | (addr << 1), type, -1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ngpio += data->mcp[addr]->chip.ngpio;
|
|
}
|
|
data->ngpio = ngpio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id mcp23s08_ids[] = {
|
|
{ "mcp23s08", MCP_TYPE_S08 },
|
|
{ "mcp23s17", MCP_TYPE_S17 },
|
|
{ "mcp23s18", MCP_TYPE_S18 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
|
|
|
|
static const struct of_device_id mcp23s08_spi_of_match[] = {
|
|
{
|
|
.compatible = "microchip,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23s18",
|
|
.data = (void *) MCP_TYPE_S18,
|
|
},
|
|
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
|
|
{
|
|
.compatible = "mcp,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "mcp,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
|
|
|
|
static struct spi_driver mcp23s08_driver = {
|
|
.probe = mcp23s08_probe,
|
|
.id_table = mcp23s08_ids,
|
|
.driver = {
|
|
.name = "mcp23s08",
|
|
.of_match_table = mcp23s08_spi_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init mcp23s08_spi_init(void)
|
|
{
|
|
return spi_register_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
/*
|
|
* Register after SPI postcore initcall and before
|
|
* subsys initcalls that may rely on these GPIOs.
|
|
*/
|
|
subsys_initcall(mcp23s08_spi_init);
|
|
|
|
static void mcp23s08_spi_exit(void)
|
|
{
|
|
spi_unregister_driver(&mcp23s08_driver);
|
|
}
|
|
module_exit(mcp23s08_spi_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|