493 строки
12 KiB
C
493 строки
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Pinctrl driver for Rockchip RK805 PMIC
|
|
*
|
|
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
|
|
*
|
|
* Author: Joseph Chen <chenjh@rock-chips.com>
|
|
*
|
|
* Based on the pinctrl-as3722 driver
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/rk808.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "core.h"
|
|
#include "pinconf.h"
|
|
#include "pinctrl-utils.h"
|
|
|
|
struct rk805_pin_function {
|
|
const char *name;
|
|
const char *const *groups;
|
|
unsigned int ngroups;
|
|
int mux_option;
|
|
};
|
|
|
|
struct rk805_pin_group {
|
|
const char *name;
|
|
const unsigned int pins[1];
|
|
unsigned int npins;
|
|
};
|
|
|
|
/*
|
|
* @reg: gpio setting register;
|
|
* @fun_mask: functions select mask value, when set is gpio;
|
|
* @dir_mask: input or output mask value, when set is output, otherwise input;
|
|
* @val_mask: gpio set value, when set is level high, otherwise low;
|
|
*
|
|
* Different PMIC has different pin features, belowing 3 mask members are not
|
|
* all necessary for every PMIC. For example, RK805 has 2 pins that can be used
|
|
* as output only GPIOs, so func_mask and dir_mask are not needed. RK816 has 1
|
|
* pin that can be used as TS/GPIO, so fun_mask, dir_mask and val_mask are all
|
|
* necessary.
|
|
*/
|
|
struct rk805_pin_config {
|
|
u8 reg;
|
|
u8 fun_msk;
|
|
u8 dir_msk;
|
|
u8 val_msk;
|
|
};
|
|
|
|
struct rk805_pctrl_info {
|
|
struct rk808 *rk808;
|
|
struct device *dev;
|
|
struct pinctrl_dev *pctl;
|
|
struct gpio_chip gpio_chip;
|
|
struct pinctrl_desc pinctrl_desc;
|
|
const struct rk805_pin_function *functions;
|
|
unsigned int num_functions;
|
|
const struct rk805_pin_group *groups;
|
|
int num_pin_groups;
|
|
const struct pinctrl_pin_desc *pins;
|
|
unsigned int num_pins;
|
|
const struct rk805_pin_config *pin_cfg;
|
|
};
|
|
|
|
enum rk805_pinmux_option {
|
|
RK805_PINMUX_GPIO,
|
|
};
|
|
|
|
enum {
|
|
RK805_GPIO0,
|
|
RK805_GPIO1,
|
|
};
|
|
|
|
static const char *const rk805_gpio_groups[] = {
|
|
"gpio0",
|
|
"gpio1",
|
|
};
|
|
|
|
/* RK805: 2 output only GPIOs */
|
|
static const struct pinctrl_pin_desc rk805_pins_desc[] = {
|
|
PINCTRL_PIN(RK805_GPIO0, "gpio0"),
|
|
PINCTRL_PIN(RK805_GPIO1, "gpio1"),
|
|
};
|
|
|
|
static const struct rk805_pin_function rk805_pin_functions[] = {
|
|
{
|
|
.name = "gpio",
|
|
.groups = rk805_gpio_groups,
|
|
.ngroups = ARRAY_SIZE(rk805_gpio_groups),
|
|
.mux_option = RK805_PINMUX_GPIO,
|
|
},
|
|
};
|
|
|
|
static const struct rk805_pin_group rk805_pin_groups[] = {
|
|
{
|
|
.name = "gpio0",
|
|
.pins = { RK805_GPIO0 },
|
|
.npins = 1,
|
|
},
|
|
{
|
|
.name = "gpio1",
|
|
.pins = { RK805_GPIO1 },
|
|
.npins = 1,
|
|
},
|
|
};
|
|
|
|
#define RK805_GPIO0_VAL_MSK BIT(0)
|
|
#define RK805_GPIO1_VAL_MSK BIT(1)
|
|
|
|
static const struct rk805_pin_config rk805_gpio_cfgs[] = {
|
|
{
|
|
.reg = RK805_OUT_REG,
|
|
.val_msk = RK805_GPIO0_VAL_MSK,
|
|
},
|
|
{
|
|
.reg = RK805_OUT_REG,
|
|
.val_msk = RK805_GPIO1_VAL_MSK,
|
|
},
|
|
};
|
|
|
|
/* generic gpio chip */
|
|
static int rk805_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
|
|
int ret, val;
|
|
|
|
ret = regmap_read(pci->rk808->regmap, pci->pin_cfg[offset].reg, &val);
|
|
if (ret) {
|
|
dev_err(pci->dev, "get gpio%d value failed\n", offset);
|
|
return ret;
|
|
}
|
|
|
|
return !!(val & pci->pin_cfg[offset].val_msk);
|
|
}
|
|
|
|
static void rk805_gpio_set(struct gpio_chip *chip,
|
|
unsigned int offset,
|
|
int value)
|
|
{
|
|
struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(pci->rk808->regmap,
|
|
pci->pin_cfg[offset].reg,
|
|
pci->pin_cfg[offset].val_msk,
|
|
value ? pci->pin_cfg[offset].val_msk : 0);
|
|
if (ret)
|
|
dev_err(pci->dev, "set gpio%d value %d failed\n",
|
|
offset, value);
|
|
}
|
|
|
|
static int rk805_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
return pinctrl_gpio_direction_input(chip->base + offset);
|
|
}
|
|
|
|
static int rk805_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
rk805_gpio_set(chip, offset, value);
|
|
return pinctrl_gpio_direction_output(chip->base + offset);
|
|
}
|
|
|
|
static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
/* default output*/
|
|
if (!pci->pin_cfg[offset].dir_msk)
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
ret = regmap_read(pci->rk808->regmap,
|
|
pci->pin_cfg[offset].reg,
|
|
&val);
|
|
if (ret) {
|
|
dev_err(pci->dev, "get gpio%d direction failed\n", offset);
|
|
return ret;
|
|
}
|
|
|
|
if (val & pci->pin_cfg[offset].dir_msk)
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static const struct gpio_chip rk805_gpio_chip = {
|
|
.label = "rk805-gpio",
|
|
.request = gpiochip_generic_request,
|
|
.free = gpiochip_generic_free,
|
|
.get_direction = rk805_gpio_get_direction,
|
|
.get = rk805_gpio_get,
|
|
.set = rk805_gpio_set,
|
|
.direction_input = rk805_gpio_direction_input,
|
|
.direction_output = rk805_gpio_direction_output,
|
|
.can_sleep = true,
|
|
.base = -1,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
/* generic pinctrl */
|
|
static int rk805_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pci->num_pin_groups;
|
|
}
|
|
|
|
static const char *rk805_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int group)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pci->groups[group].name;
|
|
}
|
|
|
|
static int rk805_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
const unsigned int **pins,
|
|
unsigned int *num_pins)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pci->groups[group].pins;
|
|
*num_pins = pci->groups[group].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops rk805_pinctrl_ops = {
|
|
.get_groups_count = rk805_pinctrl_get_groups_count,
|
|
.get_group_name = rk805_pinctrl_get_group_name,
|
|
.get_group_pins = rk805_pinctrl_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int rk805_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pci->num_functions;
|
|
}
|
|
|
|
static const char *rk805_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
|
|
unsigned int function)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pci->functions[function].name;
|
|
}
|
|
|
|
static int rk805_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
|
|
unsigned int function,
|
|
const char *const **groups,
|
|
unsigned int *const num_groups)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pci->functions[function].groups;
|
|
*num_groups = pci->functions[function].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned int offset,
|
|
int mux)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
int ret;
|
|
|
|
if (!pci->pin_cfg[offset].fun_msk)
|
|
return 0;
|
|
|
|
if (mux == RK805_PINMUX_GPIO) {
|
|
ret = regmap_update_bits(pci->rk808->regmap,
|
|
pci->pin_cfg[offset].reg,
|
|
pci->pin_cfg[offset].fun_msk,
|
|
pci->pin_cfg[offset].fun_msk);
|
|
if (ret) {
|
|
dev_err(pci->dev, "set gpio%d GPIO failed\n", offset);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(pci->dev, "Couldn't find function mux %d\n", mux);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned int function,
|
|
unsigned int group)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
int mux = pci->functions[function].mux_option;
|
|
int offset = group;
|
|
|
|
return _rk805_pinctrl_set_mux(pctldev, offset, mux);
|
|
}
|
|
|
|
static int rk805_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int offset, bool input)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
int ret;
|
|
|
|
/* switch to gpio function */
|
|
ret = _rk805_pinctrl_set_mux(pctldev, offset, RK805_PINMUX_GPIO);
|
|
if (ret) {
|
|
dev_err(pci->dev, "set gpio%d mux failed\n", offset);
|
|
return ret;
|
|
}
|
|
|
|
/* set direction */
|
|
if (!pci->pin_cfg[offset].dir_msk)
|
|
return 0;
|
|
|
|
ret = regmap_update_bits(pci->rk808->regmap,
|
|
pci->pin_cfg[offset].reg,
|
|
pci->pin_cfg[offset].dir_msk,
|
|
input ? 0 : pci->pin_cfg[offset].dir_msk);
|
|
if (ret) {
|
|
dev_err(pci->dev, "set gpio%d direction failed\n", offset);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinmux_ops rk805_pinmux_ops = {
|
|
.get_functions_count = rk805_pinctrl_get_funcs_count,
|
|
.get_function_name = rk805_pinctrl_get_func_name,
|
|
.get_function_groups = rk805_pinctrl_get_func_groups,
|
|
.set_mux = rk805_pinctrl_set_mux,
|
|
.gpio_set_direction = rk805_pmx_gpio_set_direction,
|
|
};
|
|
|
|
static int rk805_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin, unsigned long *config)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
u32 arg = 0;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_OUTPUT:
|
|
arg = rk805_gpio_get(&pci->gpio_chip, pin);
|
|
break;
|
|
default:
|
|
dev_err(pci->dev, "Properties not supported\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, (u16)arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk805_pinconf_set(struct pinctrl_dev *pctldev,
|
|
unsigned int pin, unsigned long *configs,
|
|
unsigned int num_configs)
|
|
{
|
|
struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
u32 i, arg = 0;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_OUTPUT:
|
|
rk805_gpio_set(&pci->gpio_chip, pin, arg);
|
|
rk805_pmx_gpio_set_direction(pctldev, NULL, pin, false);
|
|
break;
|
|
default:
|
|
dev_err(pci->dev, "Properties not supported\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops rk805_pinconf_ops = {
|
|
.pin_config_get = rk805_pinconf_get,
|
|
.pin_config_set = rk805_pinconf_set,
|
|
};
|
|
|
|
static const struct pinctrl_desc rk805_pinctrl_desc = {
|
|
.name = "rk805-pinctrl",
|
|
.pctlops = &rk805_pinctrl_ops,
|
|
.pmxops = &rk805_pinmux_ops,
|
|
.confops = &rk805_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int rk805_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct rk805_pctrl_info *pci;
|
|
int ret;
|
|
|
|
pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = &pdev->dev;
|
|
pci->dev->of_node = pdev->dev.parent->of_node;
|
|
pci->rk808 = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
pci->pinctrl_desc = rk805_pinctrl_desc;
|
|
pci->gpio_chip = rk805_gpio_chip;
|
|
pci->gpio_chip.parent = &pdev->dev;
|
|
pci->gpio_chip.of_node = pdev->dev.parent->of_node;
|
|
|
|
platform_set_drvdata(pdev, pci);
|
|
|
|
switch (pci->rk808->variant) {
|
|
case RK805_ID:
|
|
pci->pins = rk805_pins_desc;
|
|
pci->num_pins = ARRAY_SIZE(rk805_pins_desc);
|
|
pci->functions = rk805_pin_functions;
|
|
pci->num_functions = ARRAY_SIZE(rk805_pin_functions);
|
|
pci->groups = rk805_pin_groups;
|
|
pci->num_pin_groups = ARRAY_SIZE(rk805_pin_groups);
|
|
pci->pinctrl_desc.pins = rk805_pins_desc;
|
|
pci->pinctrl_desc.npins = ARRAY_SIZE(rk805_pins_desc);
|
|
pci->pin_cfg = rk805_gpio_cfgs;
|
|
pci->gpio_chip.ngpio = ARRAY_SIZE(rk805_gpio_cfgs);
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "unsupported RK805 ID %lu\n",
|
|
pci->rk808->variant);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Add gpio chip */
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &pci->gpio_chip, pci);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Couldn't add gpiochip\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Add pinctrl */
|
|
pci->pctl = devm_pinctrl_register(&pdev->dev, &pci->pinctrl_desc, pci);
|
|
if (IS_ERR(pci->pctl)) {
|
|
dev_err(&pdev->dev, "Couldn't add pinctrl\n");
|
|
return PTR_ERR(pci->pctl);
|
|
}
|
|
|
|
/* Add pin range */
|
|
ret = gpiochip_add_pin_range(&pci->gpio_chip, dev_name(&pdev->dev),
|
|
0, 0, pci->gpio_chip.ngpio);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Couldn't add gpiochip pin range\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rk805_pinctrl_driver = {
|
|
.probe = rk805_pinctrl_probe,
|
|
.driver = {
|
|
.name = "rk805-pinctrl",
|
|
},
|
|
};
|
|
module_platform_driver(rk805_pinctrl_driver);
|
|
|
|
MODULE_DESCRIPTION("RK805 pin control and GPIO driver");
|
|
MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>");
|
|
MODULE_LICENSE("GPL v2");
|