119 строки
2.9 KiB
C
119 строки
2.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver.
|
|
*
|
|
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
|
|
*/
|
|
|
|
/* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz
|
|
* crystal. Counter 0, which keeps counting during sleep/powerdown, is
|
|
* used to count seconds since the beginning of the unix epoch.
|
|
*
|
|
* The counters must be configured and enabled by bootloader/board code;
|
|
* no checks as to whether they really get a proper 32.768kHz clock are
|
|
* made as this would take far too long.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
|
|
/* 32kHz clock enabled and detected */
|
|
#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
|
|
|
|
static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
unsigned long t;
|
|
|
|
t = alchemy_rdsys(AU1000_SYS_TOYREAD);
|
|
|
|
rtc_time64_to_tm(t, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
unsigned long t;
|
|
|
|
t = rtc_tm_to_time64(tm);
|
|
|
|
alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
|
|
|
|
/* wait for the pending register write to succeed. This can
|
|
* take up to 6 seconds...
|
|
*/
|
|
while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops au1xtoy_rtc_ops = {
|
|
.read_time = au1xtoy_rtc_read_time,
|
|
.set_time = au1xtoy_rtc_set_time,
|
|
};
|
|
|
|
static int au1xtoy_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct rtc_device *rtcdev;
|
|
unsigned long t;
|
|
|
|
t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
|
|
if (!(t & CNTR_OK)) {
|
|
dev_err(&pdev->dev, "counters not working; aborting.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* set counter0 tickrate to 1Hz if necessary */
|
|
if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
|
|
/* wait until hardware gives access to TRIM register */
|
|
t = 0x00100000;
|
|
while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T0S) && --t)
|
|
msleep(1);
|
|
|
|
if (!t) {
|
|
/* timed out waiting for register access; assume
|
|
* counters are unusable.
|
|
*/
|
|
dev_err(&pdev->dev, "timeout waiting for access\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* set 1Hz TOY tick rate */
|
|
alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
|
|
}
|
|
|
|
/* wait until the hardware allows writes to the counter reg */
|
|
while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
|
|
msleep(1);
|
|
|
|
rtcdev = devm_rtc_allocate_device(&pdev->dev);
|
|
if (IS_ERR(rtcdev))
|
|
return PTR_ERR(rtcdev);
|
|
|
|
rtcdev->ops = &au1xtoy_rtc_ops;
|
|
rtcdev->range_max = U32_MAX;
|
|
|
|
platform_set_drvdata(pdev, rtcdev);
|
|
|
|
return devm_rtc_register_device(rtcdev);
|
|
}
|
|
|
|
static struct platform_driver au1xrtc_driver = {
|
|
.driver = {
|
|
.name = "rtc-au1xxx",
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(au1xrtc_driver, au1xtoy_rtc_probe);
|
|
|
|
MODULE_DESCRIPTION("Au1xxx TOY-counter-based RTC driver");
|
|
MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:rtc-au1xxx");
|