412 строки
9.6 KiB
C
412 строки
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* xHCI host controller driver for HiSilicon STB SoCs
|
|
*
|
|
* Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com
|
|
*
|
|
* Authors: Jianguo Sun <sunjianguo1@huawei.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include "xhci.h"
|
|
|
|
#define GTXTHRCFG 0xc108
|
|
#define GRXTHRCFG 0xc10c
|
|
#define REG_GUSB2PHYCFG0 0xc200
|
|
#define BIT_UTMI_8_16 BIT(3)
|
|
#define BIT_UTMI_ULPI BIT(4)
|
|
#define BIT_FREECLK_EXIST BIT(30)
|
|
|
|
#define REG_GUSB3PIPECTL0 0xc2c0
|
|
#define USB3_DEEMPHASIS_MASK GENMASK(2, 1)
|
|
#define USB3_DEEMPHASIS0 BIT(1)
|
|
#define USB3_TX_MARGIN1 BIT(4)
|
|
|
|
struct xhci_hcd_histb {
|
|
struct device *dev;
|
|
struct usb_hcd *hcd;
|
|
void __iomem *ctrl;
|
|
struct clk *bus_clk;
|
|
struct clk *utmi_clk;
|
|
struct clk *pipe_clk;
|
|
struct clk *suspend_clk;
|
|
struct reset_control *soft_reset;
|
|
};
|
|
|
|
static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd)
|
|
{
|
|
return dev_get_drvdata(hcd->self.controller);
|
|
}
|
|
|
|
static int xhci_histb_config(struct xhci_hcd_histb *histb)
|
|
{
|
|
struct device_node *np = histb->dev->of_node;
|
|
u32 regval;
|
|
|
|
if (of_property_match_string(np, "phys-names", "inno") >= 0) {
|
|
/* USB2 PHY chose ulpi 8bit interface */
|
|
regval = readl(histb->ctrl + REG_GUSB2PHYCFG0);
|
|
regval &= ~BIT_UTMI_ULPI;
|
|
regval &= ~(BIT_UTMI_8_16);
|
|
regval &= ~BIT_FREECLK_EXIST;
|
|
writel(regval, histb->ctrl + REG_GUSB2PHYCFG0);
|
|
}
|
|
|
|
if (of_property_match_string(np, "phys-names", "combo") >= 0) {
|
|
/*
|
|
* write 0x010c0012 to GUSB3PIPECTL0
|
|
* GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV ,
|
|
* decrease TX voltage
|
|
* GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB,
|
|
* refer to xHCI spec
|
|
*/
|
|
regval = readl(histb->ctrl + REG_GUSB3PIPECTL0);
|
|
regval &= ~USB3_DEEMPHASIS_MASK;
|
|
regval |= USB3_DEEMPHASIS0;
|
|
regval |= USB3_TX_MARGIN1;
|
|
writel(regval, histb->ctrl + REG_GUSB3PIPECTL0);
|
|
}
|
|
|
|
writel(0x23100000, histb->ctrl + GTXTHRCFG);
|
|
writel(0x23100000, histb->ctrl + GRXTHRCFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_histb_clks_get(struct xhci_hcd_histb *histb)
|
|
{
|
|
struct device *dev = histb->dev;
|
|
|
|
histb->bus_clk = devm_clk_get(dev, "bus");
|
|
if (IS_ERR(histb->bus_clk)) {
|
|
dev_err(dev, "fail to get bus clk\n");
|
|
return PTR_ERR(histb->bus_clk);
|
|
}
|
|
|
|
histb->utmi_clk = devm_clk_get(dev, "utmi");
|
|
if (IS_ERR(histb->utmi_clk)) {
|
|
dev_err(dev, "fail to get utmi clk\n");
|
|
return PTR_ERR(histb->utmi_clk);
|
|
}
|
|
|
|
histb->pipe_clk = devm_clk_get(dev, "pipe");
|
|
if (IS_ERR(histb->pipe_clk)) {
|
|
dev_err(dev, "fail to get pipe clk\n");
|
|
return PTR_ERR(histb->pipe_clk);
|
|
}
|
|
|
|
histb->suspend_clk = devm_clk_get(dev, "suspend");
|
|
if (IS_ERR(histb->suspend_clk)) {
|
|
dev_err(dev, "fail to get suspend clk\n");
|
|
return PTR_ERR(histb->suspend_clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_histb_host_enable(struct xhci_hcd_histb *histb)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(histb->bus_clk);
|
|
if (ret) {
|
|
dev_err(histb->dev, "failed to enable bus clk\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(histb->utmi_clk);
|
|
if (ret) {
|
|
dev_err(histb->dev, "failed to enable utmi clk\n");
|
|
goto err_utmi_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(histb->pipe_clk);
|
|
if (ret) {
|
|
dev_err(histb->dev, "failed to enable pipe clk\n");
|
|
goto err_pipe_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(histb->suspend_clk);
|
|
if (ret) {
|
|
dev_err(histb->dev, "failed to enable suspend clk\n");
|
|
goto err_suspend_clk;
|
|
}
|
|
|
|
reset_control_deassert(histb->soft_reset);
|
|
|
|
return 0;
|
|
|
|
err_suspend_clk:
|
|
clk_disable_unprepare(histb->pipe_clk);
|
|
err_pipe_clk:
|
|
clk_disable_unprepare(histb->utmi_clk);
|
|
err_utmi_clk:
|
|
clk_disable_unprepare(histb->bus_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
|
|
{
|
|
reset_control_assert(histb->soft_reset);
|
|
|
|
clk_disable_unprepare(histb->suspend_clk);
|
|
clk_disable_unprepare(histb->pipe_clk);
|
|
clk_disable_unprepare(histb->utmi_clk);
|
|
clk_disable_unprepare(histb->bus_clk);
|
|
}
|
|
|
|
static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
|
|
{
|
|
/*
|
|
* As of now platform drivers don't provide MSI support so we ensure
|
|
* here that the generic code does not try to make a pci_dev from our
|
|
* dev struct in order to setup MSI
|
|
*/
|
|
xhci->quirks |= XHCI_PLAT;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int xhci_histb_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd_histb *histb = hcd_to_histb(hcd);
|
|
int ret;
|
|
|
|
if (usb_hcd_is_primary_hcd(hcd)) {
|
|
ret = xhci_histb_config(histb);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return xhci_gen_setup(hcd, xhci_histb_quirks);
|
|
}
|
|
|
|
static const struct xhci_driver_overrides xhci_histb_overrides __initconst = {
|
|
.reset = xhci_histb_setup,
|
|
};
|
|
|
|
static struct hc_driver __read_mostly xhci_histb_hc_driver;
|
|
static int xhci_histb_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct xhci_hcd_histb *histb;
|
|
const struct hc_driver *driver;
|
|
struct usb_hcd *hcd;
|
|
struct xhci_hcd *xhci;
|
|
struct resource *res;
|
|
int irq;
|
|
int ret = -ENODEV;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
driver = &xhci_histb_hc_driver;
|
|
histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL);
|
|
if (!histb)
|
|
return -ENOMEM;
|
|
|
|
histb->dev = dev;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
histb->ctrl = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
if (IS_ERR(histb->ctrl))
|
|
return PTR_ERR(histb->ctrl);
|
|
|
|
ret = xhci_histb_clks_get(histb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
histb->soft_reset = devm_reset_control_get(dev, "soft");
|
|
if (IS_ERR(histb->soft_reset)) {
|
|
dev_err(dev, "failed to get soft reset\n");
|
|
return PTR_ERR(histb->soft_reset);
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
device_enable_async_suspend(dev);
|
|
|
|
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
|
|
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
goto disable_pm;
|
|
|
|
hcd = usb_create_hcd(driver, dev, dev_name(dev));
|
|
if (!hcd) {
|
|
ret = -ENOMEM;
|
|
goto disable_pm;
|
|
}
|
|
|
|
hcd->regs = histb->ctrl;
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
histb->hcd = hcd;
|
|
dev_set_drvdata(hcd->self.controller, histb);
|
|
|
|
ret = xhci_histb_host_enable(histb);
|
|
if (ret)
|
|
goto put_hcd;
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
xhci->main_hcd = hcd;
|
|
xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev),
|
|
hcd);
|
|
if (!xhci->shared_hcd) {
|
|
ret = -ENOMEM;
|
|
goto disable_host;
|
|
}
|
|
|
|
if (device_property_read_bool(dev, "usb2-lpm-disable"))
|
|
xhci->quirks |= XHCI_HW_LPM_DISABLE;
|
|
|
|
if (device_property_read_bool(dev, "usb3-lpm-capable"))
|
|
xhci->quirks |= XHCI_LPM_SUPPORT;
|
|
|
|
/* imod_interval is the interrupt moderation value in nanoseconds. */
|
|
xhci->imod_interval = 40000;
|
|
device_property_read_u32(dev, "imod-interval-ns",
|
|
&xhci->imod_interval);
|
|
|
|
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto put_usb3_hcd;
|
|
|
|
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
|
|
xhci->shared_hcd->can_do_streams = 1;
|
|
|
|
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto dealloc_usb2_hcd;
|
|
|
|
device_enable_async_suspend(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
|
|
/*
|
|
* Prevent runtime pm from being on as default, users should enable
|
|
* runtime pm using power/control in sysfs.
|
|
*/
|
|
pm_runtime_forbid(dev);
|
|
|
|
return 0;
|
|
|
|
dealloc_usb2_hcd:
|
|
usb_remove_hcd(hcd);
|
|
put_usb3_hcd:
|
|
usb_put_hcd(xhci->shared_hcd);
|
|
disable_host:
|
|
xhci_histb_host_disable(histb);
|
|
put_hcd:
|
|
usb_put_hcd(hcd);
|
|
disable_pm:
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_histb_remove(struct platform_device *dev)
|
|
{
|
|
struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
|
|
struct usb_hcd *hcd = histb->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
struct usb_hcd *shared_hcd = xhci->shared_hcd;
|
|
|
|
xhci->xhc_state |= XHCI_STATE_REMOVING;
|
|
|
|
usb_remove_hcd(shared_hcd);
|
|
xhci->shared_hcd = NULL;
|
|
device_wakeup_disable(&dev->dev);
|
|
|
|
usb_remove_hcd(hcd);
|
|
usb_put_hcd(shared_hcd);
|
|
|
|
xhci_histb_host_disable(histb);
|
|
usb_put_hcd(hcd);
|
|
pm_runtime_put_sync(&dev->dev);
|
|
pm_runtime_disable(&dev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused xhci_histb_suspend(struct device *dev)
|
|
{
|
|
struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
|
|
struct usb_hcd *hcd = histb->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
int ret;
|
|
|
|
ret = xhci_suspend(xhci, device_may_wakeup(dev));
|
|
|
|
if (!device_may_wakeup(dev))
|
|
xhci_histb_host_disable(histb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused xhci_histb_resume(struct device *dev)
|
|
{
|
|
struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
|
|
struct usb_hcd *hcd = histb->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
if (!device_may_wakeup(dev))
|
|
xhci_histb_host_enable(histb);
|
|
|
|
return xhci_resume(xhci, 0);
|
|
}
|
|
|
|
static const struct dev_pm_ops xhci_histb_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume)
|
|
};
|
|
#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL)
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id histb_xhci_of_match[] = {
|
|
{ .compatible = "hisilicon,hi3798cv200-xhci"},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, histb_xhci_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver histb_xhci_driver = {
|
|
.probe = xhci_histb_probe,
|
|
.remove = xhci_histb_remove,
|
|
.driver = {
|
|
.name = "xhci-histb",
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(histb_xhci_of_match),
|
|
},
|
|
};
|
|
MODULE_ALIAS("platform:xhci-histb");
|
|
|
|
static int __init xhci_histb_init(void)
|
|
{
|
|
xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides);
|
|
return platform_driver_register(&histb_xhci_driver);
|
|
}
|
|
module_init(xhci_histb_init);
|
|
|
|
static void __exit xhci_histb_exit(void)
|
|
{
|
|
platform_driver_unregister(&histb_xhci_driver);
|
|
}
|
|
module_exit(xhci_histb_exit);
|
|
|
|
MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|