826 строки
30 KiB
C
826 строки
30 KiB
C
/*
|
|
* dvb_frontend.h
|
|
*
|
|
* The Digital TV Frontend kABI defines a driver-internal interface for
|
|
* registering low-level, hardware specific driver to a hardware independent
|
|
* frontend layer.
|
|
*
|
|
* Copyright (C) 2001 convergence integrated media GmbH
|
|
* Copyright (C) 2004 convergence GmbH
|
|
*
|
|
* Written by Ralph Metzler
|
|
* Overhauled by Holger Waechtler
|
|
* Kernel I2C stuff by Michael Hunold <hunold@convergence.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public License
|
|
* as published by the Free Software Foundation; either version 2.1
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
*/
|
|
|
|
#ifndef _DVB_FRONTEND_H_
|
|
#define _DVB_FRONTEND_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/dvb/frontend.h>
|
|
|
|
#include <media/dvbdev.h>
|
|
|
|
/*
|
|
* Maximum number of Delivery systems per frontend. It
|
|
* should be smaller or equal to 32
|
|
*/
|
|
#define MAX_DELSYS 8
|
|
|
|
/* Helper definitions to be used at frontend drivers */
|
|
#define kHz 1000UL
|
|
#define MHz 1000000UL
|
|
|
|
/**
|
|
* struct dvb_frontend_tune_settings - parameters to adjust frontend tuning
|
|
*
|
|
* @min_delay_ms: minimum delay for tuning, in ms
|
|
* @step_size: step size between two consecutive frequencies
|
|
* @max_drift: maximum drift
|
|
*
|
|
* NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite
|
|
*/
|
|
struct dvb_frontend_tune_settings {
|
|
int min_delay_ms;
|
|
int step_size;
|
|
int max_drift;
|
|
};
|
|
|
|
struct dvb_frontend;
|
|
|
|
/**
|
|
* struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths
|
|
*
|
|
* @name: name of the Frontend
|
|
* @frequency_min_hz: minimal frequency supported in Hz
|
|
* @frequency_max_hz: maximum frequency supported in Hz
|
|
* @frequency_step_hz: frequency step in Hz
|
|
* @bandwidth_min: minimal frontend bandwidth supported
|
|
* @bandwidth_max: maximum frontend bandwidth supported
|
|
* @bandwidth_step: frontend bandwidth step
|
|
*/
|
|
struct dvb_tuner_info {
|
|
char name[128];
|
|
|
|
u32 frequency_min_hz;
|
|
u32 frequency_max_hz;
|
|
u32 frequency_step_hz;
|
|
|
|
u32 bandwidth_min;
|
|
u32 bandwidth_max;
|
|
u32 bandwidth_step;
|
|
};
|
|
|
|
/**
|
|
* struct analog_parameters - Parameters to tune into an analog/radio channel
|
|
*
|
|
* @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step,
|
|
* for TV, or 62.5 Hz for radio)
|
|
* @mode: Tuner mode, as defined on enum v4l2_tuner_type
|
|
* @audmode: Audio mode as defined for the rxsubchans field at videodev2.h,
|
|
* e. g. V4L2_TUNER_MODE_*
|
|
* @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_*
|
|
*
|
|
* Hybrid tuners should be supported by both V4L2 and DVB APIs. This
|
|
* struct contains the data that are used by the V4L2 side. To avoid
|
|
* dependencies from V4L2 headers, all enums here are declared as integers.
|
|
*/
|
|
struct analog_parameters {
|
|
unsigned int frequency;
|
|
unsigned int mode;
|
|
unsigned int audmode;
|
|
u64 std;
|
|
};
|
|
|
|
/**
|
|
* enum dvbfe_algo - defines the algorithm used to tune into a channel
|
|
*
|
|
* @DVBFE_ALGO_HW: Hardware Algorithm -
|
|
* Devices that support this algorithm do everything in hardware
|
|
* and no software support is needed to handle them.
|
|
* Requesting these devices to LOCK is the only thing required,
|
|
* device is supposed to do everything in the hardware.
|
|
*
|
|
* @DVBFE_ALGO_SW: Software Algorithm -
|
|
* These are dumb devices, that require software to do everything
|
|
*
|
|
* @DVBFE_ALGO_CUSTOM: Customizable Agorithm -
|
|
* Devices having this algorithm can be customized to have specific
|
|
* algorithms in the frontend driver, rather than simply doing a
|
|
* software zig-zag. In this case the zigzag maybe hardware assisted
|
|
* or it maybe completely done in hardware. In all cases, usage of
|
|
* this algorithm, in conjunction with the search and track
|
|
* callbacks, utilizes the driver specific algorithm.
|
|
*
|
|
* @DVBFE_ALGO_RECOVERY: Recovery Algorithm -
|
|
* These devices have AUTO recovery capabilities from LOCK failure
|
|
*/
|
|
enum dvbfe_algo {
|
|
DVBFE_ALGO_HW = BIT(0),
|
|
DVBFE_ALGO_SW = BIT(1),
|
|
DVBFE_ALGO_CUSTOM = BIT(2),
|
|
DVBFE_ALGO_RECOVERY = BIT(31),
|
|
};
|
|
|
|
/**
|
|
* enum dvbfe_search - search callback possible return status
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_SUCCESS:
|
|
* The frontend search algorithm completed and returned successfully
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_ASLEEP:
|
|
* The frontend search algorithm is sleeping
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_FAILED:
|
|
* The frontend search for a signal failed
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_INVALID:
|
|
* The frontend search algorithm was probably supplied with invalid
|
|
* parameters and the search is an invalid one
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_ERROR:
|
|
* The frontend search algorithm failed due to some error
|
|
*
|
|
* @DVBFE_ALGO_SEARCH_AGAIN:
|
|
* The frontend search algorithm was requested to search again
|
|
*/
|
|
enum dvbfe_search {
|
|
DVBFE_ALGO_SEARCH_SUCCESS = BIT(0),
|
|
DVBFE_ALGO_SEARCH_ASLEEP = BIT(1),
|
|
DVBFE_ALGO_SEARCH_FAILED = BIT(2),
|
|
DVBFE_ALGO_SEARCH_INVALID = BIT(3),
|
|
DVBFE_ALGO_SEARCH_AGAIN = BIT(4),
|
|
DVBFE_ALGO_SEARCH_ERROR = BIT(31),
|
|
};
|
|
|
|
/**
|
|
* struct dvb_tuner_ops - Tuner information and callbacks
|
|
*
|
|
* @info: embedded &struct dvb_tuner_info with tuner properties
|
|
* @release: callback function called when frontend is detached.
|
|
* drivers should free any allocated memory.
|
|
* @init: callback function used to initialize the tuner device.
|
|
* @sleep: callback function used to put the tuner to sleep.
|
|
* @suspend: callback function used to inform that the Kernel will
|
|
* suspend.
|
|
* @resume: callback function used to inform that the Kernel is
|
|
* resuming from suspend.
|
|
* @set_params: callback function used to inform the tuner to tune
|
|
* into a digital TV channel. The properties to be used
|
|
* are stored at &struct dvb_frontend.dtv_property_cache.
|
|
* The tuner demod can change the parameters to reflect
|
|
* the changes needed for the channel to be tuned, and
|
|
* update statistics. This is the recommended way to set
|
|
* the tuner parameters and should be used on newer
|
|
* drivers.
|
|
* @set_analog_params: callback function used to tune into an analog TV
|
|
* channel on hybrid tuners. It passes @analog_parameters
|
|
* to the driver.
|
|
* @set_config: callback function used to send some tuner-specific
|
|
* parameters.
|
|
* @get_frequency: get the actual tuned frequency
|
|
* @get_bandwidth: get the bandwidth used by the low pass filters
|
|
* @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband,
|
|
* should return 0.
|
|
* @get_status: returns the frontend lock status
|
|
* @get_rf_strength: returns the RF signal strength. Used mostly to support
|
|
* analog TV and radio. Digital TV should report, instead,
|
|
* via DVBv5 API (&struct dvb_frontend.dtv_property_cache).
|
|
* @get_afc: Used only by analog TV core. Reports the frequency
|
|
* drift due to AFC.
|
|
* @calc_regs: callback function used to pass register data settings
|
|
* for simple tuners. Shouldn't be used on newer drivers.
|
|
* @set_frequency: Set a new frequency. Shouldn't be used on newer drivers.
|
|
* @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers.
|
|
*
|
|
* NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for
|
|
* terrestrial/cable or kHz for satellite.
|
|
*
|
|
*/
|
|
struct dvb_tuner_ops {
|
|
|
|
struct dvb_tuner_info info;
|
|
|
|
void (*release)(struct dvb_frontend *fe);
|
|
int (*init)(struct dvb_frontend *fe);
|
|
int (*sleep)(struct dvb_frontend *fe);
|
|
int (*suspend)(struct dvb_frontend *fe);
|
|
int (*resume)(struct dvb_frontend *fe);
|
|
|
|
/* This is the recommended way to set the tuner */
|
|
int (*set_params)(struct dvb_frontend *fe);
|
|
int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p);
|
|
|
|
int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
|
|
|
|
int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency);
|
|
int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
|
|
int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency);
|
|
|
|
#define TUNER_STATUS_LOCKED 1
|
|
#define TUNER_STATUS_STEREO 2
|
|
int (*get_status)(struct dvb_frontend *fe, u32 *status);
|
|
int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
|
|
int (*get_afc)(struct dvb_frontend *fe, s32 *afc);
|
|
|
|
/*
|
|
* This is support for demods like the mt352 - fills out the supplied
|
|
* buffer with what to write.
|
|
*
|
|
* Don't use on newer drivers.
|
|
*/
|
|
int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len);
|
|
|
|
/*
|
|
* These are provided separately from set_params in order to
|
|
* facilitate silicon tuners which require sophisticated tuning loops,
|
|
* controlling each parameter separately.
|
|
*
|
|
* Don't use on newer drivers.
|
|
*/
|
|
int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
|
|
int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
|
|
};
|
|
|
|
/**
|
|
* struct analog_demod_info - Information struct for analog TV part of the demod
|
|
*
|
|
* @name: Name of the analog TV demodulator
|
|
*/
|
|
struct analog_demod_info {
|
|
char *name;
|
|
};
|
|
|
|
/**
|
|
* struct analog_demod_ops - Demodulation information and callbacks for
|
|
* analog TV and radio
|
|
*
|
|
* @info: pointer to struct analog_demod_info
|
|
* @set_params: callback function used to inform the demod to set the
|
|
* demodulator parameters needed to decode an analog or
|
|
* radio channel. The properties are passed via
|
|
* &struct analog_params.
|
|
* @has_signal: returns 0xffff if has signal, or 0 if it doesn't.
|
|
* @get_afc: Used only by analog TV core. Reports the frequency
|
|
* drift due to AFC.
|
|
* @tuner_status: callback function that returns tuner status bits, e. g.
|
|
* %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO.
|
|
* @standby: set the tuner to standby mode.
|
|
* @release: callback function called when frontend is detached.
|
|
* drivers should free any allocated memory.
|
|
* @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C
|
|
* mux support instead.
|
|
* @set_config: callback function used to send some tuner-specific
|
|
* parameters.
|
|
*/
|
|
struct analog_demod_ops {
|
|
|
|
struct analog_demod_info info;
|
|
|
|
void (*set_params)(struct dvb_frontend *fe,
|
|
struct analog_parameters *params);
|
|
int (*has_signal)(struct dvb_frontend *fe, u16 *signal);
|
|
int (*get_afc)(struct dvb_frontend *fe, s32 *afc);
|
|
void (*tuner_status)(struct dvb_frontend *fe);
|
|
void (*standby)(struct dvb_frontend *fe);
|
|
void (*release)(struct dvb_frontend *fe);
|
|
int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable);
|
|
|
|
/** This is to allow setting tuner-specific configuration */
|
|
int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
|
|
};
|
|
|
|
struct dtv_frontend_properties;
|
|
|
|
/**
|
|
* struct dvb_frontend_internal_info - Frontend properties and capabilities
|
|
*
|
|
* @name: Name of the frontend
|
|
* @frequency_min_hz: Minimal frequency supported by the frontend.
|
|
* @frequency_max_hz: Minimal frequency supported by the frontend.
|
|
* @frequency_stepsize_hz: All frequencies are multiple of this value.
|
|
* @frequency_tolerance_hz: Frequency tolerance.
|
|
* @symbol_rate_min: Minimal symbol rate, in bauds
|
|
* (for Cable/Satellite systems).
|
|
* @symbol_rate_max: Maximal symbol rate, in bauds
|
|
* (for Cable/Satellite systems).
|
|
* @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm
|
|
* (for Cable/Satellite systems).
|
|
* @caps: Capabilities supported by the frontend,
|
|
* as specified in &enum fe_caps.
|
|
*/
|
|
struct dvb_frontend_internal_info {
|
|
char name[128];
|
|
u32 frequency_min_hz;
|
|
u32 frequency_max_hz;
|
|
u32 frequency_stepsize_hz;
|
|
u32 frequency_tolerance_hz;
|
|
u32 symbol_rate_min;
|
|
u32 symbol_rate_max;
|
|
u32 symbol_rate_tolerance;
|
|
enum fe_caps caps;
|
|
};
|
|
|
|
/**
|
|
* struct dvb_frontend_ops - Demodulation information and callbacks for
|
|
* ditialt TV
|
|
*
|
|
* @info: embedded &struct dvb_tuner_info with tuner properties
|
|
* @delsys: Delivery systems supported by the frontend
|
|
* @detach: callback function called when frontend is detached.
|
|
* drivers should clean up, but not yet free the &struct
|
|
* dvb_frontend allocation.
|
|
* @release: callback function called when frontend is ready to be
|
|
* freed.
|
|
* drivers should free any allocated memory.
|
|
* @release_sec: callback function requesting that the Satellite Equipment
|
|
* Control (SEC) driver to release and free any memory
|
|
* allocated by the driver.
|
|
* @init: callback function used to initialize the tuner device.
|
|
* @sleep: callback function used to put the tuner to sleep.
|
|
* @write: callback function used by some demod legacy drivers to
|
|
* allow other drivers to write data into their registers.
|
|
* Should not be used on new drivers.
|
|
* @tune: callback function used by demod drivers that use
|
|
* @DVBFE_ALGO_HW to tune into a frequency.
|
|
* @get_frontend_algo: returns the desired hardware algorithm.
|
|
* @set_frontend: callback function used to inform the demod to set the
|
|
* parameters for demodulating a digital TV channel.
|
|
* The properties to be used are stored at &struct
|
|
* dvb_frontend.dtv_property_cache. The demod can change
|
|
* the parameters to reflect the changes needed for the
|
|
* channel to be decoded, and update statistics.
|
|
* @get_tune_settings: callback function
|
|
* @get_frontend: callback function used to inform the parameters
|
|
* actuall in use. The properties to be used are stored at
|
|
* &struct dvb_frontend.dtv_property_cache and update
|
|
* statistics. Please notice that it should not return
|
|
* an error code if the statistics are not available
|
|
* because the demog is not locked.
|
|
* @read_status: returns the locking status of the frontend.
|
|
* @read_ber: legacy callback function to return the bit error rate.
|
|
* Newer drivers should provide such info via DVBv5 API,
|
|
* e. g. @set_frontend;/@get_frontend, implementing this
|
|
* callback only if DVBv3 API compatibility is wanted.
|
|
* @read_signal_strength: legacy callback function to return the signal
|
|
* strength. Newer drivers should provide such info via
|
|
* DVBv5 API, e. g. @set_frontend/@get_frontend,
|
|
* implementing this callback only if DVBv3 API
|
|
* compatibility is wanted.
|
|
* @read_snr: legacy callback function to return the Signal/Noise
|
|
* rate. Newer drivers should provide such info via
|
|
* DVBv5 API, e. g. @set_frontend/@get_frontend,
|
|
* implementing this callback only if DVBv3 API
|
|
* compatibility is wanted.
|
|
* @read_ucblocks: legacy callback function to return the Uncorrected Error
|
|
* Blocks. Newer drivers should provide such info via
|
|
* DVBv5 API, e. g. @set_frontend/@get_frontend,
|
|
* implementing this callback only if DVBv3 API
|
|
* compatibility is wanted.
|
|
* @diseqc_reset_overload: callback function to implement the
|
|
* FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite)
|
|
* @diseqc_send_master_cmd: callback function to implement the
|
|
* FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite).
|
|
* @diseqc_recv_slave_reply: callback function to implement the
|
|
* FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite)
|
|
* @diseqc_send_burst: callback function to implement the
|
|
* FE_DISEQC_SEND_BURST() ioctl (only Satellite).
|
|
* @set_tone: callback function to implement the
|
|
* FE_SET_TONE() ioctl (only Satellite).
|
|
* @set_voltage: callback function to implement the
|
|
* FE_SET_VOLTAGE() ioctl (only Satellite).
|
|
* @enable_high_lnb_voltage: callback function to implement the
|
|
* FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite).
|
|
* @dishnetwork_send_legacy_command: callback function to implement the
|
|
* FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite).
|
|
* Drivers should not use this, except when the DVB
|
|
* core emulation fails to provide proper support (e.g.
|
|
* if @set_voltage takes more than 8ms to work), and
|
|
* when backward compatibility with this legacy API is
|
|
* required.
|
|
* @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C
|
|
* mux support instead.
|
|
* @ts_bus_ctrl: callback function used to take control of the TS bus.
|
|
* @set_lna: callback function to power on/off/auto the LNA.
|
|
* @search: callback function used on some custom algo search algos.
|
|
* @tuner_ops: pointer to &struct dvb_tuner_ops
|
|
* @analog_ops: pointer to &struct analog_demod_ops
|
|
*/
|
|
struct dvb_frontend_ops {
|
|
struct dvb_frontend_internal_info info;
|
|
|
|
u8 delsys[MAX_DELSYS];
|
|
|
|
void (*detach)(struct dvb_frontend *fe);
|
|
void (*release)(struct dvb_frontend* fe);
|
|
void (*release_sec)(struct dvb_frontend* fe);
|
|
|
|
int (*init)(struct dvb_frontend* fe);
|
|
int (*sleep)(struct dvb_frontend* fe);
|
|
|
|
int (*write)(struct dvb_frontend* fe, const u8 buf[], int len);
|
|
|
|
/* if this is set, it overrides the default swzigzag */
|
|
int (*tune)(struct dvb_frontend* fe,
|
|
bool re_tune,
|
|
unsigned int mode_flags,
|
|
unsigned int *delay,
|
|
enum fe_status *status);
|
|
|
|
/* get frontend tuning algorithm from the module */
|
|
enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe);
|
|
|
|
/* these two are only used for the swzigzag code */
|
|
int (*set_frontend)(struct dvb_frontend *fe);
|
|
int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings);
|
|
|
|
int (*get_frontend)(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *props);
|
|
|
|
int (*read_status)(struct dvb_frontend *fe, enum fe_status *status);
|
|
int (*read_ber)(struct dvb_frontend* fe, u32* ber);
|
|
int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength);
|
|
int (*read_snr)(struct dvb_frontend* fe, u16* snr);
|
|
int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks);
|
|
|
|
int (*diseqc_reset_overload)(struct dvb_frontend* fe);
|
|
int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd);
|
|
int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply);
|
|
int (*diseqc_send_burst)(struct dvb_frontend *fe,
|
|
enum fe_sec_mini_cmd minicmd);
|
|
int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone);
|
|
int (*set_voltage)(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage);
|
|
int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg);
|
|
int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd);
|
|
int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable);
|
|
int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire);
|
|
int (*set_lna)(struct dvb_frontend *);
|
|
|
|
/*
|
|
* These callbacks are for devices that implement their own
|
|
* tuning algorithms, rather than a simple swzigzag
|
|
*/
|
|
enum dvbfe_search (*search)(struct dvb_frontend *fe);
|
|
|
|
struct dvb_tuner_ops tuner_ops;
|
|
struct analog_demod_ops analog_ops;
|
|
};
|
|
|
|
#ifdef __DVB_CORE__
|
|
#define MAX_EVENT 8
|
|
|
|
/* Used only internally at dvb_frontend.c */
|
|
struct dvb_fe_events {
|
|
struct dvb_frontend_event events[MAX_EVENT];
|
|
int eventw;
|
|
int eventr;
|
|
int overflow;
|
|
wait_queue_head_t wait_queue;
|
|
struct mutex mtx;
|
|
};
|
|
#endif
|
|
|
|
/**
|
|
* struct dtv_frontend_properties - contains a list of properties that are
|
|
* specific to a digital TV standard.
|
|
*
|
|
* @frequency: frequency in Hz for terrestrial/cable or in kHz for
|
|
* Satellite
|
|
* @modulation: Frontend modulation type
|
|
* @voltage: SEC voltage (only Satellite)
|
|
* @sectone: SEC tone mode (only Satellite)
|
|
* @inversion: Spectral inversion
|
|
* @fec_inner: Forward error correction inner Code Rate
|
|
* @transmission_mode: Transmission Mode
|
|
* @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace
|
|
* wants to autodetect.
|
|
* @guard_interval: Guard Interval
|
|
* @hierarchy: Hierarchy
|
|
* @symbol_rate: Symbol Rate
|
|
* @code_rate_HP: high priority stream code rate
|
|
* @code_rate_LP: low priority stream code rate
|
|
* @pilot: Enable/disable/autodetect pilot tones
|
|
* @rolloff: Rolloff factor (alpha)
|
|
* @delivery_system: FE delivery system (e. g. digital TV standard)
|
|
* @interleaving: interleaving
|
|
* @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard)
|
|
* @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard)
|
|
* @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard)
|
|
* @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard)
|
|
* @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard)
|
|
* @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard)
|
|
* @layer: ISDB per-layer data (only ISDB standard)
|
|
* @layer.segment_count: Segment Count;
|
|
* @layer.fec: per layer code rate;
|
|
* @layer.modulation: per layer modulation;
|
|
* @layer.interleaving: per layer interleaving.
|
|
* @stream_id: If different than zero, enable substream filtering, if
|
|
* hardware supports (DVB-S2 and DVB-T2).
|
|
* @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer
|
|
* scrambling sequence.
|
|
* @atscmh_fic_ver: Version number of the FIC (Fast Information Channel)
|
|
* signaling data (only ATSC-M/H)
|
|
* @atscmh_parade_id: Parade identification number (only ATSC-M/H)
|
|
* @atscmh_nog: Number of MH groups per MH subframe for a designated
|
|
* parade (only ATSC-M/H)
|
|
* @atscmh_tnog: Total number of MH groups including all MH groups
|
|
* belonging to all MH parades in one MH subframe
|
|
* (only ATSC-M/H)
|
|
* @atscmh_sgn: Start group number (only ATSC-M/H)
|
|
* @atscmh_prc: Parade repetition cycle (only ATSC-M/H)
|
|
* @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H)
|
|
* @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H)
|
|
* @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H)
|
|
* @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H)
|
|
* @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC)
|
|
* Block Mode (only ATSC-M/H)
|
|
* @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H)
|
|
* @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H)
|
|
* @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H)
|
|
* @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H)
|
|
* @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA)
|
|
* @strength: DVBv5 API statistics: Signal Strength
|
|
* @cnr: DVBv5 API statistics: Signal to Noise ratio of the
|
|
* (main) carrier
|
|
* @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count
|
|
* @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count
|
|
* @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count
|
|
* @post_bit_count: DVBv5 API statistics: post-Viterbi bit count
|
|
* @block_error: DVBv5 API statistics: block error count
|
|
* @block_count: DVBv5 API statistics: block count
|
|
*
|
|
* NOTE: derivated statistics like Uncorrected Error blocks (UCE) are
|
|
* calculated on userspace.
|
|
*
|
|
* Only a subset of the properties are needed for a given delivery system.
|
|
* For more info, consult the media_api.html with the documentation of the
|
|
* Userspace API.
|
|
*/
|
|
struct dtv_frontend_properties {
|
|
u32 frequency;
|
|
enum fe_modulation modulation;
|
|
|
|
enum fe_sec_voltage voltage;
|
|
enum fe_sec_tone_mode sectone;
|
|
enum fe_spectral_inversion inversion;
|
|
enum fe_code_rate fec_inner;
|
|
enum fe_transmit_mode transmission_mode;
|
|
u32 bandwidth_hz; /* 0 = AUTO */
|
|
enum fe_guard_interval guard_interval;
|
|
enum fe_hierarchy hierarchy;
|
|
u32 symbol_rate;
|
|
enum fe_code_rate code_rate_HP;
|
|
enum fe_code_rate code_rate_LP;
|
|
|
|
enum fe_pilot pilot;
|
|
enum fe_rolloff rolloff;
|
|
|
|
enum fe_delivery_system delivery_system;
|
|
|
|
enum fe_interleaving interleaving;
|
|
|
|
/* ISDB-T specifics */
|
|
u8 isdbt_partial_reception;
|
|
u8 isdbt_sb_mode;
|
|
u8 isdbt_sb_subchannel;
|
|
u32 isdbt_sb_segment_idx;
|
|
u32 isdbt_sb_segment_count;
|
|
u8 isdbt_layer_enabled;
|
|
struct {
|
|
u8 segment_count;
|
|
enum fe_code_rate fec;
|
|
enum fe_modulation modulation;
|
|
u8 interleaving;
|
|
} layer[3];
|
|
|
|
/* Multistream specifics */
|
|
u32 stream_id;
|
|
|
|
/* Physical Layer Scrambling specifics */
|
|
u32 scrambling_sequence_index;
|
|
|
|
/* ATSC-MH specifics */
|
|
u8 atscmh_fic_ver;
|
|
u8 atscmh_parade_id;
|
|
u8 atscmh_nog;
|
|
u8 atscmh_tnog;
|
|
u8 atscmh_sgn;
|
|
u8 atscmh_prc;
|
|
|
|
u8 atscmh_rs_frame_mode;
|
|
u8 atscmh_rs_frame_ensemble;
|
|
u8 atscmh_rs_code_mode_pri;
|
|
u8 atscmh_rs_code_mode_sec;
|
|
u8 atscmh_sccc_block_mode;
|
|
u8 atscmh_sccc_code_mode_a;
|
|
u8 atscmh_sccc_code_mode_b;
|
|
u8 atscmh_sccc_code_mode_c;
|
|
u8 atscmh_sccc_code_mode_d;
|
|
|
|
u32 lna;
|
|
|
|
/* statistics data */
|
|
struct dtv_fe_stats strength;
|
|
struct dtv_fe_stats cnr;
|
|
struct dtv_fe_stats pre_bit_error;
|
|
struct dtv_fe_stats pre_bit_count;
|
|
struct dtv_fe_stats post_bit_error;
|
|
struct dtv_fe_stats post_bit_count;
|
|
struct dtv_fe_stats block_error;
|
|
struct dtv_fe_stats block_count;
|
|
};
|
|
|
|
#define DVB_FE_NO_EXIT 0
|
|
#define DVB_FE_NORMAL_EXIT 1
|
|
#define DVB_FE_DEVICE_REMOVED 2
|
|
#define DVB_FE_DEVICE_RESUME 3
|
|
|
|
/**
|
|
* struct dvb_frontend - Frontend structure to be used on drivers.
|
|
*
|
|
* @refcount: refcount to keep track of &struct dvb_frontend
|
|
* references
|
|
* @ops: embedded &struct dvb_frontend_ops
|
|
* @dvb: pointer to &struct dvb_adapter
|
|
* @demodulator_priv: demod private data
|
|
* @tuner_priv: tuner private data
|
|
* @frontend_priv: frontend private data
|
|
* @sec_priv: SEC private data
|
|
* @analog_demod_priv: Analog demod private data
|
|
* @dtv_property_cache: embedded &struct dtv_frontend_properties
|
|
* @callback: callback function used on some drivers to call
|
|
* either the tuner or the demodulator.
|
|
* @id: Frontend ID
|
|
* @exit: Used to inform the DVB core that the frontend
|
|
* thread should exit (usually, means that the hardware
|
|
* got disconnected.
|
|
*/
|
|
|
|
struct dvb_frontend {
|
|
struct kref refcount;
|
|
struct dvb_frontend_ops ops;
|
|
struct dvb_adapter *dvb;
|
|
void *demodulator_priv;
|
|
void *tuner_priv;
|
|
void *frontend_priv;
|
|
void *sec_priv;
|
|
void *analog_demod_priv;
|
|
struct dtv_frontend_properties dtv_property_cache;
|
|
#define DVB_FRONTEND_COMPONENT_TUNER 0
|
|
#define DVB_FRONTEND_COMPONENT_DEMOD 1
|
|
int (*callback)(void *adapter_priv, int component, int cmd, int arg);
|
|
int id;
|
|
unsigned int exit;
|
|
};
|
|
|
|
/**
|
|
* dvb_register_frontend() - Registers a DVB frontend at the adapter
|
|
*
|
|
* @dvb: pointer to &struct dvb_adapter
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* Allocate and initialize the private data needed by the frontend core to
|
|
* manage the frontend and calls dvb_register_device() to register a new
|
|
* frontend. It also cleans the property cache that stores the frontend
|
|
* parameters and selects the first available delivery system.
|
|
*/
|
|
int dvb_register_frontend(struct dvb_adapter *dvb,
|
|
struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_unregister_frontend() - Unregisters a DVB frontend
|
|
*
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* Stops the frontend kthread, calls dvb_unregister_device() and frees the
|
|
* private frontend data allocated by dvb_register_frontend().
|
|
*
|
|
* NOTE: This function doesn't frees the memory allocated by the demod,
|
|
* by the SEC driver and by the tuner. In order to free it, an explicit call to
|
|
* dvb_frontend_detach() is needed, after calling this function.
|
|
*/
|
|
int dvb_unregister_frontend(struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_frontend_detach() - Detaches and frees frontend specific data
|
|
*
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* This function should be called after dvb_unregister_frontend(). It
|
|
* calls the SEC, tuner and demod release functions:
|
|
* &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release,
|
|
* &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release.
|
|
*
|
|
* If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases
|
|
* the module reference count, needed to allow userspace to remove the
|
|
* previously used DVB frontend modules.
|
|
*/
|
|
void dvb_frontend_detach(struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_frontend_suspend() - Suspends a Digital TV frontend
|
|
*
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* This function prepares a Digital TV frontend to suspend.
|
|
*
|
|
* In order to prepare the tuner to suspend, if
|
|
* &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise,
|
|
* it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available.
|
|
*
|
|
* It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend.
|
|
*
|
|
* The drivers should also call dvb_frontend_suspend\(\) as part of their
|
|
* handler for the &device_driver.suspend\(\).
|
|
*/
|
|
int dvb_frontend_suspend(struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_frontend_resume() - Resumes a Digital TV frontend
|
|
*
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* This function resumes the usual operation of the tuner after resume.
|
|
*
|
|
* In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\).
|
|
*
|
|
* If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it.
|
|
* Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available.
|
|
*
|
|
* Once tuner and demods are resumed, it will enforce that the SEC voltage and
|
|
* tone are restored to their previous values and wake up the frontend's
|
|
* kthread in order to retune the frontend.
|
|
*
|
|
* The drivers should also call dvb_frontend_resume() as part of their
|
|
* handler for the &device_driver.resume\(\).
|
|
*/
|
|
int dvb_frontend_resume(struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_frontend_reinitialise() - forces a reinitialisation at the frontend
|
|
*
|
|
* @fe: pointer to &struct dvb_frontend
|
|
*
|
|
* Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\),
|
|
* and resets SEC tone and voltage (for Satellite systems).
|
|
*
|
|
* NOTE: Currently, this function is used only by one driver (budget-av).
|
|
* It seems to be due to address some special issue with that specific
|
|
* frontend.
|
|
*/
|
|
void dvb_frontend_reinitialise(struct dvb_frontend *fe);
|
|
|
|
/**
|
|
* dvb_frontend_sleep_until() - Sleep for the amount of time given by
|
|
* add_usec parameter
|
|
*
|
|
* @waketime: pointer to &struct ktime_t
|
|
* @add_usec: time to sleep, in microseconds
|
|
*
|
|
* This function is used to measure the time required for the
|
|
* FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise
|
|
* as possible, as it affects the detection of the dish tone command at the
|
|
* satellite subsystem.
|
|
*
|
|
* Its used internally by the DVB frontend core, in order to emulate
|
|
* FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\)
|
|
* callback.
|
|
*
|
|
* NOTE: it should not be used at the drivers, as the emulation for the
|
|
* legacy callback is provided by the Kernel. The only situation where this
|
|
* should be at the drivers is when there are some bugs at the hardware that
|
|
* would prevent the core emulation to work. On such cases, the driver would
|
|
* be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and
|
|
* calling this function directly.
|
|
*/
|
|
void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec);
|
|
|
|
#endif
|