894 строки
22 KiB
C
894 строки
22 KiB
C
/*
|
|
* SMP support for power macintosh.
|
|
*
|
|
* We support both the old "powersurge" SMP architecture
|
|
* and the current Core99 (G4 PowerMac) machines.
|
|
*
|
|
* Note that we don't support the very first rev. of
|
|
* Apple/DayStar 2 CPUs board, the one with the funky
|
|
* watchdog. Hopefully, none of these should be there except
|
|
* maybe internally to Apple. I should probably still add some
|
|
* code to detect this card though and disable SMP. --BenH.
|
|
*
|
|
* Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
|
|
* and Ben Herrenschmidt <benh@kernel.crashing.org>.
|
|
*
|
|
* Support for DayStar quad CPU cards
|
|
* Copyright (C) XLR8, Inc. 1994-2000
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/compiler.h>
|
|
|
|
#include <asm/ptrace.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/keylargo.h>
|
|
#include <asm/pmac_low_i2c.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(fmt...) udbg_printf(fmt)
|
|
#else
|
|
#define DBG(fmt...)
|
|
#endif
|
|
|
|
extern void __secondary_start_pmac_0(void);
|
|
|
|
#ifdef CONFIG_PPC32
|
|
|
|
/* Sync flag for HW tb sync */
|
|
static volatile int sec_tb_reset = 0;
|
|
|
|
/*
|
|
* Powersurge (old powermac SMP) support.
|
|
*/
|
|
|
|
/* Addresses for powersurge registers */
|
|
#define HAMMERHEAD_BASE 0xf8000000
|
|
#define HHEAD_CONFIG 0x90
|
|
#define HHEAD_SEC_INTR 0xc0
|
|
|
|
/* register for interrupting the primary processor on the powersurge */
|
|
/* N.B. this is actually the ethernet ROM! */
|
|
#define PSURGE_PRI_INTR 0xf3019000
|
|
|
|
/* register for storing the start address for the secondary processor */
|
|
/* N.B. this is the PCI config space address register for the 1st bridge */
|
|
#define PSURGE_START 0xf2800000
|
|
|
|
/* Daystar/XLR8 4-CPU card */
|
|
#define PSURGE_QUAD_REG_ADDR 0xf8800000
|
|
|
|
#define PSURGE_QUAD_IRQ_SET 0
|
|
#define PSURGE_QUAD_IRQ_CLR 1
|
|
#define PSURGE_QUAD_IRQ_PRIMARY 2
|
|
#define PSURGE_QUAD_CKSTOP_CTL 3
|
|
#define PSURGE_QUAD_PRIMARY_ARB 4
|
|
#define PSURGE_QUAD_BOARD_ID 6
|
|
#define PSURGE_QUAD_WHICH_CPU 7
|
|
#define PSURGE_QUAD_CKSTOP_RDBK 8
|
|
#define PSURGE_QUAD_RESET_CTL 11
|
|
|
|
#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v)))
|
|
#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
|
|
#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
|
|
#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
|
|
|
|
/* virtual addresses for the above */
|
|
static volatile u8 __iomem *hhead_base;
|
|
static volatile u8 __iomem *quad_base;
|
|
static volatile u32 __iomem *psurge_pri_intr;
|
|
static volatile u8 __iomem *psurge_sec_intr;
|
|
static volatile u32 __iomem *psurge_start;
|
|
|
|
/* values for psurge_type */
|
|
#define PSURGE_NONE -1
|
|
#define PSURGE_DUAL 0
|
|
#define PSURGE_QUAD_OKEE 1
|
|
#define PSURGE_QUAD_COTTON 2
|
|
#define PSURGE_QUAD_ICEGRASS 3
|
|
|
|
/* what sort of powersurge board we have */
|
|
static int psurge_type = PSURGE_NONE;
|
|
|
|
/*
|
|
* Set and clear IPIs for powersurge.
|
|
*/
|
|
static inline void psurge_set_ipi(int cpu)
|
|
{
|
|
if (psurge_type == PSURGE_NONE)
|
|
return;
|
|
if (cpu == 0)
|
|
in_be32(psurge_pri_intr);
|
|
else if (psurge_type == PSURGE_DUAL)
|
|
out_8(psurge_sec_intr, 0);
|
|
else
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
|
|
}
|
|
|
|
static inline void psurge_clr_ipi(int cpu)
|
|
{
|
|
if (cpu > 0) {
|
|
switch(psurge_type) {
|
|
case PSURGE_DUAL:
|
|
out_8(psurge_sec_intr, ~0);
|
|
case PSURGE_NONE:
|
|
break;
|
|
default:
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* On powersurge (old SMP powermac architecture) we don't have
|
|
* separate IPIs for separate messages like openpic does. Instead
|
|
* we have a bitmap for each processor, where a 1 bit means that
|
|
* the corresponding message is pending for that processor.
|
|
* Ideally each cpu's entry would be in a different cache line.
|
|
* -- paulus.
|
|
*/
|
|
static unsigned long psurge_smp_message[NR_CPUS];
|
|
|
|
void psurge_smp_message_recv(struct pt_regs *regs)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
int msg;
|
|
|
|
/* clear interrupt */
|
|
psurge_clr_ipi(cpu);
|
|
|
|
if (num_online_cpus() < 2)
|
|
return;
|
|
|
|
/* make sure there is a message there */
|
|
for (msg = 0; msg < 4; msg++)
|
|
if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
|
|
smp_message_recv(msg, regs);
|
|
}
|
|
|
|
irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
|
|
{
|
|
psurge_smp_message_recv(regs);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void smp_psurge_message_pass(int target, int msg)
|
|
{
|
|
int i;
|
|
|
|
if (num_online_cpus() < 2)
|
|
return;
|
|
|
|
for (i = 0; i < NR_CPUS; i++) {
|
|
if (!cpu_online(i))
|
|
continue;
|
|
if (target == MSG_ALL
|
|
|| (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
|
|
|| target == i) {
|
|
set_bit(msg, &psurge_smp_message[i]);
|
|
psurge_set_ipi(i);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Determine a quad card presence. We read the board ID register, we
|
|
* force the data bus to change to something else, and we read it again.
|
|
* It it's stable, then the register probably exist (ugh !)
|
|
*/
|
|
static int __init psurge_quad_probe(void)
|
|
{
|
|
int type;
|
|
unsigned int i;
|
|
|
|
type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
|
|
if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
|
|
|| type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
|
|
return PSURGE_DUAL;
|
|
|
|
/* looks OK, try a slightly more rigorous test */
|
|
/* bogus is not necessarily cacheline-aligned,
|
|
though I don't suppose that really matters. -- paulus */
|
|
for (i = 0; i < 100; i++) {
|
|
volatile u32 bogus[8];
|
|
bogus[(0+i)%8] = 0x00000000;
|
|
bogus[(1+i)%8] = 0x55555555;
|
|
bogus[(2+i)%8] = 0xFFFFFFFF;
|
|
bogus[(3+i)%8] = 0xAAAAAAAA;
|
|
bogus[(4+i)%8] = 0x33333333;
|
|
bogus[(5+i)%8] = 0xCCCCCCCC;
|
|
bogus[(6+i)%8] = 0xCCCCCCCC;
|
|
bogus[(7+i)%8] = 0x33333333;
|
|
wmb();
|
|
asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
|
|
mb();
|
|
if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
|
|
return PSURGE_DUAL;
|
|
}
|
|
return type;
|
|
}
|
|
|
|
static void __init psurge_quad_init(void)
|
|
{
|
|
int procbits;
|
|
|
|
if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
|
|
procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
|
|
if (psurge_type == PSURGE_QUAD_ICEGRASS)
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
|
|
else
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
|
|
mdelay(33);
|
|
out_8(psurge_sec_intr, ~0);
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
|
|
if (psurge_type != PSURGE_QUAD_ICEGRASS)
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
|
|
mdelay(33);
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
|
|
mdelay(33);
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
|
|
mdelay(33);
|
|
}
|
|
|
|
static int __init smp_psurge_probe(void)
|
|
{
|
|
int i, ncpus;
|
|
|
|
/* We don't do SMP on the PPC601 -- paulus */
|
|
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
|
|
return 1;
|
|
|
|
/*
|
|
* The powersurge cpu board can be used in the generation
|
|
* of powermacs that have a socket for an upgradeable cpu card,
|
|
* including the 7500, 8500, 9500, 9600.
|
|
* The device tree doesn't tell you if you have 2 cpus because
|
|
* OF doesn't know anything about the 2nd processor.
|
|
* Instead we look for magic bits in magic registers,
|
|
* in the hammerhead memory controller in the case of the
|
|
* dual-cpu powersurge board. -- paulus.
|
|
*/
|
|
if (find_devices("hammerhead") == NULL)
|
|
return 1;
|
|
|
|
hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
|
|
quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
|
|
psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
|
|
|
|
psurge_type = psurge_quad_probe();
|
|
if (psurge_type != PSURGE_DUAL) {
|
|
psurge_quad_init();
|
|
/* All released cards using this HW design have 4 CPUs */
|
|
ncpus = 4;
|
|
} else {
|
|
iounmap(quad_base);
|
|
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
|
|
/* not a dual-cpu card */
|
|
iounmap(hhead_base);
|
|
psurge_type = PSURGE_NONE;
|
|
return 1;
|
|
}
|
|
ncpus = 2;
|
|
}
|
|
|
|
psurge_start = ioremap(PSURGE_START, 4);
|
|
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
|
|
|
|
/*
|
|
* This is necessary because OF doesn't know about the
|
|
* secondary cpu(s), and thus there aren't nodes in the
|
|
* device tree for them, and smp_setup_cpu_maps hasn't
|
|
* set their bits in cpu_possible_map and cpu_present_map.
|
|
*/
|
|
if (ncpus > NR_CPUS)
|
|
ncpus = NR_CPUS;
|
|
for (i = 1; i < ncpus ; ++i) {
|
|
cpu_set(i, cpu_present_map);
|
|
cpu_set(i, cpu_possible_map);
|
|
set_hard_smp_processor_id(i, i);
|
|
}
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
|
|
|
|
return ncpus;
|
|
}
|
|
|
|
static void __init smp_psurge_kick_cpu(int nr)
|
|
{
|
|
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
|
|
unsigned long a;
|
|
|
|
/* may need to flush here if secondary bats aren't setup */
|
|
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
|
|
asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
|
|
asm volatile("sync");
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
|
|
|
|
out_be32(psurge_start, start);
|
|
mb();
|
|
|
|
psurge_set_ipi(nr);
|
|
udelay(10);
|
|
psurge_clr_ipi(nr);
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
|
|
}
|
|
|
|
/*
|
|
* With the dual-cpu powersurge board, the decrementers and timebases
|
|
* of both cpus are frozen after the secondary cpu is started up,
|
|
* until we give the secondary cpu another interrupt. This routine
|
|
* uses this to get the timebases synchronized.
|
|
* -- paulus.
|
|
*/
|
|
static void __init psurge_dual_sync_tb(int cpu_nr)
|
|
{
|
|
int t;
|
|
|
|
set_dec(tb_ticks_per_jiffy);
|
|
/* XXX fixme */
|
|
set_tb(0, 0);
|
|
|
|
if (cpu_nr > 0) {
|
|
mb();
|
|
sec_tb_reset = 1;
|
|
return;
|
|
}
|
|
|
|
/* wait for the secondary to have reset its TB before proceeding */
|
|
for (t = 10000000; t > 0 && !sec_tb_reset; --t)
|
|
;
|
|
|
|
/* now interrupt the secondary, starting both TBs */
|
|
psurge_set_ipi(1);
|
|
}
|
|
|
|
static struct irqaction psurge_irqaction = {
|
|
.handler = psurge_primary_intr,
|
|
.flags = SA_INTERRUPT,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "primary IPI",
|
|
};
|
|
|
|
static void __init smp_psurge_setup_cpu(int cpu_nr)
|
|
{
|
|
|
|
if (cpu_nr == 0) {
|
|
/* If we failed to start the second CPU, we should still
|
|
* send it an IPI to start the timebase & DEC or we might
|
|
* have them stuck.
|
|
*/
|
|
if (num_online_cpus() < 2) {
|
|
if (psurge_type == PSURGE_DUAL)
|
|
psurge_set_ipi(1);
|
|
return;
|
|
}
|
|
/* reset the entry point so if we get another intr we won't
|
|
* try to startup again */
|
|
out_be32(psurge_start, 0x100);
|
|
if (setup_irq(30, &psurge_irqaction))
|
|
printk(KERN_ERR "Couldn't get primary IPI interrupt");
|
|
}
|
|
|
|
if (psurge_type == PSURGE_DUAL)
|
|
psurge_dual_sync_tb(cpu_nr);
|
|
}
|
|
|
|
void __init smp_psurge_take_timebase(void)
|
|
{
|
|
/* Dummy implementation */
|
|
}
|
|
|
|
void __init smp_psurge_give_timebase(void)
|
|
{
|
|
/* Dummy implementation */
|
|
}
|
|
|
|
/* PowerSurge-style Macs */
|
|
struct smp_ops_t psurge_smp_ops = {
|
|
.message_pass = smp_psurge_message_pass,
|
|
.probe = smp_psurge_probe,
|
|
.kick_cpu = smp_psurge_kick_cpu,
|
|
.setup_cpu = smp_psurge_setup_cpu,
|
|
.give_timebase = smp_psurge_give_timebase,
|
|
.take_timebase = smp_psurge_take_timebase,
|
|
};
|
|
#endif /* CONFIG_PPC32 - actually powersurge support */
|
|
|
|
/*
|
|
* Core 99 and later support
|
|
*/
|
|
|
|
static void (*pmac_tb_freeze)(int freeze);
|
|
static unsigned long timebase;
|
|
static int tb_req;
|
|
|
|
static void smp_core99_give_timebase(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
while(!tb_req)
|
|
barrier();
|
|
tb_req = 0;
|
|
(*pmac_tb_freeze)(1);
|
|
mb();
|
|
timebase = get_tb();
|
|
mb();
|
|
while (timebase)
|
|
barrier();
|
|
mb();
|
|
(*pmac_tb_freeze)(0);
|
|
mb();
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
|
|
static void __devinit smp_core99_take_timebase(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
tb_req = 1;
|
|
mb();
|
|
while (!timebase)
|
|
barrier();
|
|
mb();
|
|
set_tb(timebase >> 32, timebase & 0xffffffff);
|
|
timebase = 0;
|
|
mb();
|
|
set_dec(tb_ticks_per_jiffy/2);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#ifdef CONFIG_PPC64
|
|
/*
|
|
* G5s enable/disable the timebase via an i2c-connected clock chip.
|
|
*/
|
|
static struct device_node *pmac_tb_clock_chip_host;
|
|
static u8 pmac_tb_pulsar_addr;
|
|
|
|
static void smp_core99_cypress_tb_freeze(int freeze)
|
|
{
|
|
u8 data;
|
|
int rc;
|
|
|
|
/* Strangely, the device-tree says address is 0xd2, but darwin
|
|
* accesses 0xd0 ...
|
|
*/
|
|
pmac_low_i2c_setmode(pmac_tb_clock_chip_host,
|
|
pmac_low_i2c_mode_combined);
|
|
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
|
|
0xd0 | pmac_low_i2c_read,
|
|
0x81, &data, 1);
|
|
if (rc != 0)
|
|
goto bail;
|
|
|
|
data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
|
|
|
|
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
|
|
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
|
|
0xd0 | pmac_low_i2c_write,
|
|
0x81, &data, 1);
|
|
|
|
bail:
|
|
if (rc != 0) {
|
|
printk("Cypress Timebase %s rc: %d\n",
|
|
freeze ? "freeze" : "unfreeze", rc);
|
|
panic("Timebase freeze failed !\n");
|
|
}
|
|
}
|
|
|
|
|
|
static void smp_core99_pulsar_tb_freeze(int freeze)
|
|
{
|
|
u8 data;
|
|
int rc;
|
|
|
|
pmac_low_i2c_setmode(pmac_tb_clock_chip_host,
|
|
pmac_low_i2c_mode_combined);
|
|
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
|
|
pmac_tb_pulsar_addr | pmac_low_i2c_read,
|
|
0x2e, &data, 1);
|
|
if (rc != 0)
|
|
goto bail;
|
|
|
|
data = (data & 0x88) | (freeze ? 0x11 : 0x22);
|
|
|
|
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
|
|
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
|
|
pmac_tb_pulsar_addr | pmac_low_i2c_write,
|
|
0x2e, &data, 1);
|
|
bail:
|
|
if (rc != 0) {
|
|
printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
|
|
freeze ? "freeze" : "unfreeze", rc);
|
|
panic("Timebase freeze failed !\n");
|
|
}
|
|
}
|
|
|
|
static void __init smp_core99_setup_i2c_hwsync(int ncpus)
|
|
{
|
|
struct device_node *cc = NULL;
|
|
struct device_node *p;
|
|
const char *name = NULL;
|
|
u32 *reg;
|
|
int ok;
|
|
|
|
/* Look for the clock chip */
|
|
while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
|
|
p = of_get_parent(cc);
|
|
ok = p && device_is_compatible(p, "uni-n-i2c");
|
|
of_node_put(p);
|
|
if (!ok)
|
|
continue;
|
|
|
|
reg = (u32 *)get_property(cc, "reg", NULL);
|
|
if (reg == NULL)
|
|
continue;
|
|
|
|
switch (*reg) {
|
|
case 0xd2:
|
|
if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
|
|
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
|
|
pmac_tb_pulsar_addr = 0xd2;
|
|
name = "Pulsar";
|
|
} else if (device_is_compatible(cc, "cy28508")) {
|
|
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
|
|
name = "Cypress";
|
|
}
|
|
break;
|
|
case 0xd4:
|
|
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
|
|
pmac_tb_pulsar_addr = 0xd4;
|
|
name = "Pulsar";
|
|
break;
|
|
}
|
|
if (pmac_tb_freeze != NULL)
|
|
break;
|
|
}
|
|
if (pmac_tb_freeze != NULL) {
|
|
struct device_node *p = of_get_parent(cc);
|
|
of_node_put(cc);
|
|
while(p && strcmp(p->type, "i2c")) {
|
|
cc = of_get_parent(p);
|
|
of_node_put(p);
|
|
p = cc;
|
|
}
|
|
if (p == NULL)
|
|
goto no_i2c_sync;
|
|
/* Open i2c bus for synchronous access */
|
|
if (pmac_low_i2c_open(p, 0)) {
|
|
printk(KERN_ERR "Failed top open i2c bus %s for clock"
|
|
" sync, fallback to software sync !\n",
|
|
p->full_name);
|
|
of_node_put(p);
|
|
goto no_i2c_sync;
|
|
}
|
|
pmac_tb_clock_chip_host = p;
|
|
printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
|
|
name);
|
|
return;
|
|
}
|
|
no_i2c_sync:
|
|
pmac_tb_freeze = NULL;
|
|
}
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
|
|
/*
|
|
* SMP G4 and newer G5 use a GPIO to enable/disable the timebase.
|
|
*/
|
|
|
|
static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */
|
|
|
|
static void smp_core99_gpio_tb_freeze(int freeze)
|
|
{
|
|
if (freeze)
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
|
|
else
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
|
|
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
|
|
}
|
|
|
|
/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
|
|
volatile static long int core99_l2_cache;
|
|
volatile static long int core99_l3_cache;
|
|
|
|
static void __devinit core99_init_caches(int cpu)
|
|
{
|
|
#ifndef CONFIG_PPC64
|
|
if (!cpu_has_feature(CPU_FTR_L2CR))
|
|
return;
|
|
|
|
if (cpu == 0) {
|
|
core99_l2_cache = _get_L2CR();
|
|
printk("CPU0: L2CR is %lx\n", core99_l2_cache);
|
|
} else {
|
|
printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
|
|
_set_L2CR(0);
|
|
_set_L2CR(core99_l2_cache);
|
|
printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
|
|
}
|
|
|
|
if (!cpu_has_feature(CPU_FTR_L3CR))
|
|
return;
|
|
|
|
if (cpu == 0){
|
|
core99_l3_cache = _get_L3CR();
|
|
printk("CPU0: L3CR is %lx\n", core99_l3_cache);
|
|
} else {
|
|
printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
|
|
_set_L3CR(0);
|
|
_set_L3CR(core99_l3_cache);
|
|
printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
|
|
}
|
|
#endif /* !CONFIG_PPC64 */
|
|
}
|
|
|
|
static void __init smp_core99_setup(int ncpus)
|
|
{
|
|
#ifdef CONFIG_PPC64
|
|
|
|
/* i2c based HW sync on some G5s */
|
|
if (machine_is_compatible("PowerMac7,2") ||
|
|
machine_is_compatible("PowerMac7,3") ||
|
|
machine_is_compatible("RackMac3,1"))
|
|
smp_core99_setup_i2c_hwsync(ncpus);
|
|
|
|
/* GPIO based HW sync on recent G5s */
|
|
if (pmac_tb_freeze == NULL) {
|
|
struct device_node *np =
|
|
of_find_node_by_name(NULL, "timebase-enable");
|
|
u32 *reg = (u32 *)get_property(np, "reg", NULL);
|
|
|
|
if (np && reg && !strcmp(np->type, "gpio")) {
|
|
core99_tb_gpio = *reg;
|
|
if (core99_tb_gpio < 0x50)
|
|
core99_tb_gpio += 0x50;
|
|
pmac_tb_freeze = smp_core99_gpio_tb_freeze;
|
|
printk(KERN_INFO "Processor timebase sync using"
|
|
" GPIO 0x%02x\n", core99_tb_gpio);
|
|
}
|
|
}
|
|
|
|
#else /* CONFIG_PPC64 */
|
|
|
|
/* GPIO based HW sync on ppc32 Core99 */
|
|
if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
|
|
struct device_node *cpu;
|
|
u32 *tbprop = NULL;
|
|
|
|
core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
|
|
cpu = of_find_node_by_type(NULL, "cpu");
|
|
if (cpu != NULL) {
|
|
tbprop = (u32 *)get_property(cpu, "timebase-enable",
|
|
NULL);
|
|
if (tbprop)
|
|
core99_tb_gpio = *tbprop;
|
|
of_node_put(cpu);
|
|
}
|
|
pmac_tb_freeze = smp_core99_gpio_tb_freeze;
|
|
printk(KERN_INFO "Processor timebase sync using"
|
|
" GPIO 0x%02x\n", core99_tb_gpio);
|
|
}
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
/* No timebase sync, fallback to software */
|
|
if (pmac_tb_freeze == NULL) {
|
|
smp_ops->give_timebase = smp_generic_give_timebase;
|
|
smp_ops->take_timebase = smp_generic_take_timebase;
|
|
printk(KERN_INFO "Processor timebase sync using software\n");
|
|
}
|
|
|
|
#ifndef CONFIG_PPC64
|
|
{
|
|
int i;
|
|
|
|
/* XXX should get this from reg properties */
|
|
for (i = 1; i < ncpus; ++i)
|
|
smp_hw_index[i] = i;
|
|
}
|
|
#endif
|
|
|
|
/* 32 bits SMP can't NAP */
|
|
if (!machine_is_compatible("MacRISC4"))
|
|
powersave_nap = 0;
|
|
}
|
|
|
|
static int __init smp_core99_probe(void)
|
|
{
|
|
struct device_node *cpus;
|
|
int ncpus = 0;
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
|
|
|
|
/* Count CPUs in the device-tree */
|
|
for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
|
|
++ncpus;
|
|
|
|
printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
|
|
|
|
/* Nothing more to do if less than 2 of them */
|
|
if (ncpus <= 1)
|
|
return 1;
|
|
|
|
smp_core99_setup(ncpus);
|
|
mpic_request_ipis();
|
|
core99_init_caches(0);
|
|
|
|
return ncpus;
|
|
}
|
|
|
|
static void __devinit smp_core99_kick_cpu(int nr)
|
|
{
|
|
unsigned int save_vector;
|
|
unsigned long target, flags;
|
|
volatile unsigned int *vector
|
|
= ((volatile unsigned int *)(KERNELBASE+0x100));
|
|
|
|
if (nr < 0 || nr > 3)
|
|
return;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("smp_core99_kick_cpu", 0x346);
|
|
|
|
local_irq_save(flags);
|
|
local_irq_disable();
|
|
|
|
/* Save reset vector */
|
|
save_vector = *vector;
|
|
|
|
/* Setup fake reset vector that does
|
|
* b __secondary_start_pmac_0 + nr*8 - KERNELBASE
|
|
*/
|
|
target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
|
|
create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
|
|
|
|
/* Put some life in our friend */
|
|
pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
|
|
|
|
/* FIXME: We wait a bit for the CPU to take the exception, I should
|
|
* instead wait for the entry code to set something for me. Well,
|
|
* ideally, all that crap will be done in prom.c and the CPU left
|
|
* in a RAM-based wait loop like CHRP.
|
|
*/
|
|
mdelay(1);
|
|
|
|
/* Restore our exception vector */
|
|
*vector = save_vector;
|
|
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
|
|
|
|
local_irq_restore(flags);
|
|
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
|
|
}
|
|
|
|
static void __devinit smp_core99_setup_cpu(int cpu_nr)
|
|
{
|
|
/* Setup L2/L3 */
|
|
if (cpu_nr != 0)
|
|
core99_init_caches(cpu_nr);
|
|
|
|
/* Setup openpic */
|
|
mpic_setup_this_cpu();
|
|
|
|
if (cpu_nr == 0) {
|
|
#ifdef CONFIG_PPC64
|
|
extern void g5_phy_disable_cpu1(void);
|
|
|
|
/* Close i2c bus if it was used for tb sync */
|
|
if (pmac_tb_clock_chip_host) {
|
|
pmac_low_i2c_close(pmac_tb_clock_chip_host);
|
|
pmac_tb_clock_chip_host = NULL;
|
|
}
|
|
|
|
/* If we didn't start the second CPU, we must take
|
|
* it off the bus
|
|
*/
|
|
if (machine_is_compatible("MacRISC4") &&
|
|
num_online_cpus() < 2)
|
|
g5_phy_disable_cpu1();
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("core99_setup_cpu 0 done", 0x349);
|
|
}
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
|
|
|
|
int smp_core99_cpu_disable(void)
|
|
{
|
|
cpu_clear(smp_processor_id(), cpu_online_map);
|
|
|
|
/* XXX reset cpu affinity here */
|
|
mpic_cpu_set_priority(0xf);
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
mb();
|
|
udelay(20);
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
return 0;
|
|
}
|
|
|
|
extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
|
|
static int cpu_dead[NR_CPUS];
|
|
|
|
void cpu_die(void)
|
|
{
|
|
local_irq_disable();
|
|
cpu_dead[smp_processor_id()] = 1;
|
|
mb();
|
|
low_cpu_die();
|
|
}
|
|
|
|
void smp_core99_cpu_die(unsigned int cpu)
|
|
{
|
|
int timeout;
|
|
|
|
timeout = 1000;
|
|
while (!cpu_dead[cpu]) {
|
|
if (--timeout == 0) {
|
|
printk("CPU %u refused to die!\n", cpu);
|
|
break;
|
|
}
|
|
msleep(1);
|
|
}
|
|
cpu_dead[cpu] = 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* Core99 Macs (dual G4s and G5s) */
|
|
struct smp_ops_t core99_smp_ops = {
|
|
.message_pass = smp_mpic_message_pass,
|
|
.probe = smp_core99_probe,
|
|
.kick_cpu = smp_core99_kick_cpu,
|
|
.setup_cpu = smp_core99_setup_cpu,
|
|
.give_timebase = smp_core99_give_timebase,
|
|
.take_timebase = smp_core99_take_timebase,
|
|
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
|
|
.cpu_disable = smp_core99_cpu_disable,
|
|
.cpu_die = smp_core99_cpu_die,
|
|
#endif
|
|
};
|