WSL2-Linux-Kernel/sound/oss/ad1848_mixer.h

254 строки
11 KiB
C

/*
* sound/ad1848_mixer.h
*
* Definitions for the mixer of AD1848 and compatible codecs.
*/
/*
* Copyright (C) by Hannu Savolainen 1993-1997
*
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
* Version 2 (June 1991). See the "COPYING" file distributed with this software
* for more info.
*/
/*
* The AD1848 codec has generic input lines called Line, Aux1 and Aux2.
* Sound card manufacturers have connected actual inputs (CD, synth, line,
* etc) to these inputs in different order. Therefore it's difficult
* to assign mixer channels to these inputs correctly. The following
* contains two alternative mappings. The first one is for GUS MAX and
* the second is just a generic one (line1, line2 and line3).
* (Actually this is not a mapping but rather some kind of interleaving
* solution).
*/
#define MODE1_REC_DEVICES (SOUND_MASK_LINE3 | SOUND_MASK_MIC | \
SOUND_MASK_LINE1 | SOUND_MASK_IMIX)
#define SPRO_REC_DEVICES (SOUND_MASK_LINE | SOUND_MASK_MIC | \
SOUND_MASK_CD | SOUND_MASK_LINE1)
#define MODE1_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_MIC | \
SOUND_MASK_LINE2 | \
SOUND_MASK_IGAIN | \
SOUND_MASK_PCM | SOUND_MASK_IMIX)
#define MODE2_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
SOUND_MASK_MIC | \
SOUND_MASK_LINE3 | SOUND_MASK_SPEAKER | \
SOUND_MASK_IGAIN | \
SOUND_MASK_PCM | SOUND_MASK_IMIX)
#define MODE3_MIXER_DEVICES (MODE2_MIXER_DEVICES | SOUND_MASK_VOLUME)
/* OPTi 82C930 has no IMIX level control, but it can still be selected as an
* input
*/
#define C930_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
SOUND_MASK_MIC | SOUND_MASK_VOLUME | \
SOUND_MASK_LINE3 | \
SOUND_MASK_IGAIN | SOUND_MASK_PCM)
#define SPRO_MIXER_DEVICES (SOUND_MASK_VOLUME | SOUND_MASK_PCM | \
SOUND_MASK_LINE | SOUND_MASK_SYNTH | \
SOUND_MASK_CD | SOUND_MASK_MIC | \
SOUND_MASK_SPEAKER | SOUND_MASK_LINE1 | \
SOUND_MASK_OGAIN)
struct mixer_def {
unsigned int regno:6; /* register number for volume */
unsigned int polarity:1; /* volume polarity: 0=normal, 1=reversed */
unsigned int bitpos:3; /* position of bits in register for volume */
unsigned int nbits:3; /* number of bits in register for volume */
unsigned int mutereg:6; /* register number for mute bit */
unsigned int mutepol:1; /* mute polarity: 0=normal, 1=reversed */
unsigned int mutepos:4; /* position of mute bit in register */
unsigned int recreg:6; /* register number for recording bit */
unsigned int recpol:1; /* recording polarity: 0=normal, 1=reversed */
unsigned int recpos:4; /* position of recording bit in register */
};
static char mix_cvt[101] = {
0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42,
43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65,
65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79,
80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90,
91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99,
100
};
typedef struct mixer_def mixer_ent;
typedef mixer_ent mixer_ents[2];
/*
* Most of the mixer entries work in backwards. Setting the polarity field
* makes them to work correctly.
*
* The channel numbering used by individual sound cards is not fixed. Some
* cards have assigned different meanings for the AUX1, AUX2 and LINE inputs.
* The current version doesn't try to compensate this.
*/
#define MIX_ENT(name, reg_l, pola_l, pos_l, len_l, reg_r, pola_r, pos_r, len_r, mute_bit) \
[name] = {{reg_l, pola_l, pos_l, len_l, reg_l, 0, mute_bit, 0, 0, 8}, \
{reg_r, pola_r, pos_r, len_r, reg_r, 0, mute_bit, 0, 0, 8}}
#define MIX_ENT2(name, reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \
rec_reg_l, rec_pola_l, rec_pos_l, \
reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \
rec_reg_r, rec_pola_r, rec_pos_r) \
[name] = {{reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \
rec_reg_l, rec_pola_l, rec_pos_l}, \
{reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \
rec_reg_r, rec_pola_r, rec_pos_r}}
static mixer_ents ad1848_mix_devices[32] = {
MIX_ENT(SOUND_MIXER_VOLUME, 27, 1, 0, 4, 29, 1, 0, 4, 8),
MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8),
MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_IMIX, 13, 1, 2, 6, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7)
};
static mixer_ents iwave_mix_devices[32] = {
MIX_ENT(SOUND_MIXER_VOLUME, 25, 1, 0, 5, 27, 1, 0, 5, 8),
MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8),
MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_IMIX, 16, 1, 0, 5, 17, 1, 0, 5, 8),
MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7)
};
static mixer_ents cs42xb_mix_devices[32] = {
/* Digital master volume actually has seven bits, but we only use
six to avoid the discontinuity when the analog gain kicks in. */
MIX_ENT(SOUND_MIXER_VOLUME, 46, 1, 0, 6, 47, 1, 0, 6, 7),
MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_MIC, 34, 1, 0, 5, 35, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
/* For the IMIX entry, it was not possible to use the MIX_ENT macro
because the mute bit is in different positions for the two
channels and requires reverse polarity. */
[SOUND_MIXER_IMIX] = {{13, 1, 2, 6, 13, 1, 0, 0, 0, 8},
{42, 1, 0, 6, 42, 1, 7, 0, 0, 8}},
MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_LINE3, 38, 1, 0, 6, 39, 1, 0, 6, 7)
};
/* OPTi 82C930 has somewhat different port addresses.
* Note: VOLUME == SPEAKER, SYNTH == LINE2, LINE == LINE3, CD == LINE1
* VOLUME, SYNTH, LINE, CD are not enabled above.
* MIC is level of mic monitoring direct to output. Same for CD, LINE, etc.
*/
static mixer_ents c930_mix_devices[32] = {
MIX_ENT(SOUND_MIXER_VOLUME, 22, 1, 1, 5, 23, 1, 1, 5, 7),
MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 5, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 5, 7, 1, 0, 5, 7),
MIX_ENT(SOUND_MIXER_SPEAKER, 22, 1, 1, 5, 23, 1, 1, 5, 7),
MIX_ENT(SOUND_MIXER_LINE, 18, 1, 1, 4, 19, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_MIC, 20, 1, 1, 4, 21, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_CD, 2, 1, 1, 4, 3, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 1, 4, 3, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 1, 4, 5, 1, 1, 4, 7),
MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 1, 4, 19, 1, 1, 4, 7)
};
static mixer_ents spro_mix_devices[32] = {
MIX_ENT (SOUND_MIXER_VOLUME, 19, 0, 4, 4, 19, 0, 0, 4, 8),
MIX_ENT (SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT (SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT2(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 23, 0, 3, 0, 0, 8,
5, 1, 1, 4, 23, 0, 3, 0, 0, 8),
MIX_ENT (SOUND_MIXER_PCM, 6, 1, 1, 4, 7, 1, 1, 4, 8),
MIX_ENT (SOUND_MIXER_SPEAKER, 18, 0, 3, 2, 0, 0, 0, 0, 8),
MIX_ENT2(SOUND_MIXER_LINE, 20, 0, 4, 4, 17, 1, 4, 16, 0, 2,
20, 0, 0, 4, 17, 1, 3, 16, 0, 1),
MIX_ENT2(SOUND_MIXER_MIC, 18, 0, 0, 3, 17, 1, 0, 16, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
MIX_ENT2(SOUND_MIXER_CD, 21, 0, 4, 4, 17, 1, 2, 16, 0, 4,
21, 0, 0, 4, 17, 1, 1, 16, 0, 3),
MIX_ENT (SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT (SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT (SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT (SOUND_MIXER_IGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
MIX_ENT (SOUND_MIXER_OGAIN, 17, 1, 6, 1, 0, 0, 0, 0, 8),
/* This is external wavetable */
MIX_ENT2(SOUND_MIXER_LINE1, 22, 0, 4, 4, 23, 1, 1, 23, 0, 4,
22, 0, 0, 4, 23, 1, 0, 23, 0, 5),
};
static int default_mixer_levels[32] =
{
0x3232, /* Master Volume */
0x3232, /* Bass */
0x3232, /* Treble */
0x4b4b, /* FM */
0x3232, /* PCM */
0x1515, /* PC Speaker */
0x2020, /* Ext Line */
0x1010, /* Mic */
0x4b4b, /* CD */
0x0000, /* Recording monitor */
0x4b4b, /* Second PCM */
0x4b4b, /* Recording level */
0x4b4b, /* Input gain */
0x4b4b, /* Output gain */
0x2020, /* Line1 */
0x2020, /* Line2 */
0x1515 /* Line3 (usually line in)*/
};
#define LEFT_CHN 0
#define RIGHT_CHN 1
/*
* Channel enable bits for ioctl(SOUND_MIXER_PRIVATE1)
*/
#ifndef AUDIO_SPEAKER
#define AUDIO_SPEAKER 0x01 /* Enable mono output */
#define AUDIO_HEADPHONE 0x02 /* Sparc only */
#define AUDIO_LINE_OUT 0x04 /* Sparc only */
#endif