microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/media/pci/zoran/zr36060.c

871 строка
27 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Zoran ZR36060 basic configuration functions
*
* Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/wait.h>
/* I/O commands, error codes */
#include <linux/io.h>
/* headerfile of this module */
#include "zr36060.h"
/* codec io API */
#include "videocodec.h"
/* it doesn't make sense to have more than 20 or so, just to prevent some unwanted loops */
#define MAX_CODECS 20
/* amount of chips attached via this driver */
static int zr36060_codecs;
static bool low_bitrate;
module_param(low_bitrate, bool, 0);
MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
/* =========================================================================
* Local hardware I/O functions:
* read/write via codec layer (registers are located in the master device)
* =========================================================================
*/
static u8 zr36060_read(struct zr36060 *ptr, u16 reg)
{
u8 value = 0;
struct zoran *zr = videocodec_to_zoran(ptr->codec);
// just in case something is wrong...
if (ptr->codec->master_data->readreg)
value = (ptr->codec->master_data->readreg(ptr->codec, reg)) & 0xff;
else
zrdev_err(zr, "%s: invalid I/O setup, nothing read!\n", ptr->name);
return value;
}
static void zr36060_write(struct zr36060 *ptr, u16 reg, u8 value)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
zrdev_dbg(zr, "0x%02x @0x%04x\n", value, reg);
// just in case something is wrong...
if (ptr->codec->master_data->writereg)
ptr->codec->master_data->writereg(ptr->codec, reg, value);
else
zrdev_err(zr, "%s: invalid I/O setup, nothing written!\n", ptr->name);
}
/* =========================================================================
* Local helper function:
* status read
* =========================================================================
*/
/* status is kept in datastructure */
static u8 zr36060_read_status(struct zr36060 *ptr)
{
ptr->status = zr36060_read(ptr, ZR060_CFSR);
zr36060_read(ptr, 0);
return ptr->status;
}
/* scale factor is kept in datastructure */
static u16 zr36060_read_scalefactor(struct zr36060 *ptr)
{
ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) |
(zr36060_read(ptr, ZR060_SF_LO) & 0xFF);
/* leave 0 selected for an eventually GO from master */
zr36060_read(ptr, 0);
return ptr->scalefact;
}
/* wait if codec is ready to proceed (end of processing) or time is over */
static void zr36060_wait_end(struct zr36060 *ptr)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
int i = 0;
while (zr36060_read_status(ptr) & ZR060_CFSR_BUSY) {
udelay(1);
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
zrdev_dbg(zr,
"%s: timeout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
break;
}
}
}
/* Basic test of "connectivity", writes/reads to/from memory the SOF marker */
static int zr36060_basic_test(struct zr36060 *ptr)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) &&
(zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) {
zrdev_err(zr, "%s: attach failed, can't connect to jpeg processor!\n", ptr->name);
return -ENXIO;
}
zr36060_wait_end(ptr);
if (ptr->status & ZR060_CFSR_BUSY) {
zrdev_err(zr, "%s: attach failed, jpeg processor failed (end flag)!\n", ptr->name);
return -EBUSY;
}
return 0; /* looks good! */
}
/* simple loop for pushing the init datasets */
static int zr36060_pushit(struct zr36060 *ptr, u16 startreg, u16 len, const char *data)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
int i = 0;
zrdev_dbg(zr, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
startreg, len);
while (i < len)
zr36060_write(ptr, startreg++, data[i++]);
return i;
}
/* =========================================================================
* Basic datasets:
* jpeg baseline setup data (you find it on lots places in internet, or just
* extract it from any regular .jpg image...)
*
* Could be variable, but until it's not needed it they are just fixed to save
* memory. Otherwise expand zr36060 structure with arrays, push the values to
* it and initialize from there, as e.g. the linux zr36057/60 driver does it.
* =========================================================================
*/
static const char zr36060_dqt[0x86] = {
0xff, 0xdb, //Marker: DQT
0x00, 0x84, //Length: 2*65+2
0x00, //Pq,Tq first table
0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
0x01, //Pq,Tq second table
0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
};
static const char zr36060_dht[0x1a4] = {
0xff, 0xc4, //Marker: DHT
0x01, 0xa2, //Length: 2*AC, 2*DC
0x00, //DC first table
0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x01, //DC second table
0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x10, //AC first table
0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
0xF8, 0xF9, 0xFA,
0x11, //AC second table
0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
0xF9, 0xFA
};
/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
#define NO_OF_COMPONENTS 0x3 //Y,U,V
#define BASELINE_PRECISION 0x8 //MCU size (?)
static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT
static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC
static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC
/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
/*
* SOF (start of frame) segment depends on width, height and sampling ratio
* of each color component
*/
static int zr36060_set_sof(struct zr36060 *ptr)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
char sof_data[34]; // max. size of register set
int i;
zrdev_dbg(zr, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
ptr->width, ptr->height, NO_OF_COMPONENTS);
sof_data[0] = 0xff;
sof_data[1] = 0xc0;
sof_data[2] = 0x00;
sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060
sof_data[5] = (ptr->height) >> 8;
sof_data[6] = (ptr->height) & 0xff;
sof_data[7] = (ptr->width) >> 8;
sof_data[8] = (ptr->width) & 0xff;
sof_data[9] = NO_OF_COMPONENTS;
for (i = 0; i < NO_OF_COMPONENTS; i++) {
sof_data[10 + (i * 3)] = i; // index identifier
sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) |
(ptr->v_samp_ratio[i]); // sampling ratios
sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection
}
return zr36060_pushit(ptr, ZR060_SOF_IDX,
(3 * NO_OF_COMPONENTS) + 10, sof_data);
}
/* SOS (start of scan) segment depends on the used scan components of each color component */
static int zr36060_set_sos(struct zr36060 *ptr)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
char sos_data[16]; // max. size of register set
int i;
zrdev_dbg(zr, "%s: write SOS\n", ptr->name);
sos_data[0] = 0xff;
sos_data[1] = 0xda;
sos_data[2] = 0x00;
sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
sos_data[4] = NO_OF_COMPONENTS;
for (i = 0; i < NO_OF_COMPONENTS; i++) {
sos_data[5 + (i * 2)] = i; // index
sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
zr36060_ta[i]; // AC/DC tbl.sel.
}
sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start
sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
return zr36060_pushit(ptr, ZR060_SOS_IDX,
4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
sos_data);
}
/* DRI (define restart interval) */
static int zr36060_set_dri(struct zr36060 *ptr)
{
struct zoran *zr = videocodec_to_zoran(ptr->codec);
char dri_data[6]; // max. size of register set
zrdev_dbg(zr, "%s: write DRI\n", ptr->name);
dri_data[0] = 0xff;
dri_data[1] = 0xdd;
dri_data[2] = 0x00;
dri_data[3] = 0x04;
dri_data[4] = (ptr->dri) >> 8;
dri_data[5] = (ptr->dri) & 0xff;
return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data);
}
/* Setup compression/decompression of Zoran's JPEG processor ( see also zoran 36060 manual )
* ... sorry for the spaghetti code ...
*/
static void zr36060_init(struct zr36060 *ptr)
{
int sum = 0;
long bitcnt, tmp;
struct zoran *zr = videocodec_to_zoran(ptr->codec);
if (ptr->mode == CODEC_DO_COMPRESSION) {
zrdev_dbg(zr, "%s: COMPRESSION SETUP\n", ptr->name);
zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SYNC_RST);
/* 060 communicates with 067 in master mode */
zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CODE_MSTR);
/* Compression with or without variable scale factor */
/*FIXME: What about ptr->bitrate_ctrl? */
zr36060_write(ptr, ZR060_CMR, ZR060_CMR_COMP | ZR060_CMR_PASS2 | ZR060_CMR_BRB);
/* Must be zero */
zr36060_write(ptr, ZR060_MBZ, 0x00);
zr36060_write(ptr, ZR060_TCR_HI, 0x00);
zr36060_write(ptr, ZR060_TCR_LO, 0x00);
/* Disable all IRQs - no DataErr means autoreset */
zr36060_write(ptr, ZR060_IMR, 0);
/* volume control settings */
zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8);
zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff);
zr36060_write(ptr, ZR060_AF_HI, 0xff);
zr36060_write(ptr, ZR060_AF_M, 0xff);
zr36060_write(ptr, ZR060_AF_LO, 0xff);
/* setup the variable jpeg tables */
sum += zr36060_set_sof(ptr);
sum += zr36060_set_sos(ptr);
sum += zr36060_set_dri(ptr);
/* setup the fixed jpeg tables - maybe variable, though - (see table init section above) */
sum += zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), zr36060_dqt);
sum += zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), zr36060_dht);
zr36060_write(ptr, ZR060_APP_IDX, 0xff);
zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn);
zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00);
zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2);
sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, ptr->app.data) + 4;
zr36060_write(ptr, ZR060_COM_IDX, 0xff);
zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe);
zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00);
zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2);
sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, ptr->com.data) + 4;
/* setup misc. data for compression (target code sizes) */
/* size of compressed code to reach without header data */
sum = ptr->real_code_vol - sum;
bitcnt = sum << 3; /* need the size in bits */
tmp = bitcnt >> 16;
zrdev_dbg(zr,
"%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8);
zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff);
tmp = bitcnt & 0xffff;
zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8);
zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff);
bitcnt -= bitcnt >> 7; // bits without stuffing
bitcnt -= ((bitcnt * 5) >> 6); // bits without eob
tmp = bitcnt >> 16;
zrdev_dbg(zr, "%s: code: nettobit=%ld, highnettobits=%ld\n",
ptr->name, bitcnt, tmp);
zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8);
zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff);
tmp = bitcnt & 0xffff;
zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8);
zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff);
/* JPEG markers to be included in the compressed stream */
zr36060_write(ptr, ZR060_MER,
ZR060_MER_DQT | ZR060_MER_DHT |
((ptr->com.len > 0) ? ZR060_MER_COM : 0) |
((ptr->app.len > 0) ? ZR060_MER_APP : 0));
/* Setup the Video Frontend */
/* Limit pixel range to 16..235 as per CCIR-601 */
zr36060_write(ptr, ZR060_VCR, ZR060_VCR_RANGE);
} else {
zrdev_dbg(zr, "%s: EXPANSION SETUP\n", ptr->name);
zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SYNC_RST);
/* 060 communicates with 067 in master mode */
zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CODE_MSTR);
/* Decompression */
zr36060_write(ptr, ZR060_CMR, 0);
/* Must be zero */
zr36060_write(ptr, ZR060_MBZ, 0x00);
zr36060_write(ptr, ZR060_TCR_HI, 0x00);
zr36060_write(ptr, ZR060_TCR_LO, 0x00);
/* Disable all IRQs - no DataErr means autoreset */
zr36060_write(ptr, ZR060_IMR, 0);
/* setup misc. data for expansion */
zr36060_write(ptr, ZR060_MER, 0);
/* setup the fixed jpeg tables - maybe variable, though - (see table init section above) */
zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), zr36060_dht);
/* Setup the Video Frontend */
//zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FI_EXT);
//this doesn't seem right and doesn't work...
zr36060_write(ptr, ZR060_VCR, ZR060_VCR_RANGE);
}
/* Load the tables */
zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SYNC_RST | ZR060_LOAD_LOAD);
zr36060_wait_end(ptr);
zrdev_dbg(zr, "%s: Status after table preload: 0x%02x\n",
ptr->name, ptr->status);
if (ptr->status & ZR060_CFSR_BUSY) {
zrdev_err(zr, "%s: init aborted!\n", ptr->name);
return; // something is wrong, its timed out!!!!
}
}
/* =========================================================================
* CODEC API FUNCTIONS
* this functions are accessed by the master via the API structure
* =========================================================================
*/
/* set compressiion/expansion mode and launches codec -
* this should be the last call from the master before starting processing
*/
static int zr36060_set_mode(struct videocodec *codec, int mode)
{
struct zr36060 *ptr = (struct zr36060 *)codec->data;
struct zoran *zr = videocodec_to_zoran(codec);
zrdev_dbg(zr, "%s: set_mode %d call\n", ptr->name, mode);
if (mode != CODEC_DO_EXPANSION && mode != CODEC_DO_COMPRESSION)
return -EINVAL;
ptr->mode = mode;
zr36060_init(ptr);
return 0;
}
/* set picture size (norm is ignored as the codec doesn't know about it) */
static int zr36060_set_video(struct videocodec *codec, const struct tvnorm *norm,
struct vfe_settings *cap, struct vfe_polarity *pol)
{
struct zr36060 *ptr = (struct zr36060 *)codec->data;
struct zoran *zr = videocodec_to_zoran(codec);
u32 reg;
int size;
zrdev_dbg(zr, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name,
cap->x, cap->y, cap->width, cap->height, cap->decimation);
/* if () return -EINVAL;
* trust the master driver that it knows what it does - so
* we allow invalid startx/y and norm for now ...
*/
ptr->width = cap->width / (cap->decimation & 0xff);
ptr->height = cap->height / (cap->decimation >> 8);
zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SYNC_RST);
/* Note that VSPol/HSPol bits in zr36060 have the opposite
* meaning of their zr360x7 counterparts with the same names
* N.b. for VSPol this is only true if FIVEdge = 0 (default,
* left unchanged here - in accordance with datasheet).
*/
reg = (!pol->vsync_pol ? ZR060_VPR_VS_POL : 0)
| (!pol->hsync_pol ? ZR060_VPR_HS_POL : 0)
| (pol->field_pol ? ZR060_VPR_FI_POL : 0)
| (pol->blank_pol ? ZR060_VPR_BL_POL : 0)
| (pol->subimg_pol ? ZR060_VPR_S_IMG_POL : 0)
| (pol->poe_pol ? ZR060_VPR_POE_POL : 0)
| (pol->pvalid_pol ? ZR060_VPR_P_VAL_POL : 0)
| (pol->vclk_pol ? ZR060_VPR_VCLK_POL : 0);
zr36060_write(ptr, ZR060_VPR, reg);
reg = 0;
switch (cap->decimation & 0xff) {
default:
case 1:
break;
case 2:
reg |= ZR060_SR_H_SCALE2;
break;
case 4:
reg |= ZR060_SR_H_SCALE4;
break;
}
switch (cap->decimation >> 8) {
default:
case 1:
break;
case 2:
reg |= ZR060_SR_V_SCALE;
break;
}
zr36060_write(ptr, ZR060_SR, reg);
zr36060_write(ptr, ZR060_BCR_Y, 0x00);
zr36060_write(ptr, ZR060_BCR_U, 0x80);
zr36060_write(ptr, ZR060_BCR_V, 0x80);
/* sync generator */
reg = norm->ht - 1; /* Vtotal */
zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff);
reg = norm->wt - 1; /* Htotal */
zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff);
reg = 6 - 1; /* VsyncSize */
zr36060_write(ptr, ZR060_SGR_VSYNC, reg);
reg = 68;
zr36060_write(ptr, ZR060_SGR_HSYNC, reg);
reg = norm->v_start - 1; /* BVstart */
zr36060_write(ptr, ZR060_SGR_BVSTART, reg);
reg += norm->ha / 2; /* BVend */
zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff);
reg = norm->h_start - 1; /* BHstart */
zr36060_write(ptr, ZR060_SGR_BHSTART, reg);
reg += norm->wa; /* BHend */
zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff);
/* active area */
reg = cap->y + norm->v_start; /* Vstart */
zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff);
reg += cap->height; /* Vend */
zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff);
reg = cap->x + norm->h_start; /* Hstart */
zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff);
reg += cap->width; /* Hend */
zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff);
/* subimage area */
reg = norm->v_start - 4; /* SVstart */
zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff);
reg += norm->ha / 2 + 8; /* SVend */
zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff);
reg = norm->h_start /*+ 64 */ - 4; /* SHstart */
zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff);
reg += norm->wa + 8; /* SHend */
zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff);
zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff);
size = ptr->width * ptr->height;
/* Target compressed field size in bits: */
size = size * 16; /* uncompressed size in bits */
/* (Ronald) by default, quality = 100 is a compression
* ratio 1:2. Setting low_bitrate (insmod option) sets
* it to 1:4 (instead of 1:2, zr36060 max) as limit because the
* buz can't handle more at decimation=1... Use low_bitrate if
* you have a Buz, unless you know what you're doing
*/
size = size * cap->quality / (low_bitrate ? 400 : 200);
/* Lower limit (arbitrary, 1 KB) */
if (size < 8192)
size = 8192;
/* Upper limit: 7/8 of the code buffers */
if (size > ptr->total_code_vol * 7)
size = ptr->total_code_vol * 7;
ptr->real_code_vol = size >> 3; /* in bytes */
/* the MBCVR is the *maximum* block volume, according to the
* JPEG ISO specs, this shouldn't be used, since that allows
* for the best encoding quality. So set it to it's max value
*/
reg = ptr->max_block_vol;
zr36060_write(ptr, ZR060_MBCVR, reg);
return 0;
}
/* additional control functions */
static int zr36060_control(struct videocodec *codec, int type, int size, void *data)
{
struct zr36060 *ptr = (struct zr36060 *)codec->data;
struct zoran *zr = videocodec_to_zoran(codec);
int *ival = (int *)data;
zrdev_dbg(zr, "%s: control %d call with %d byte\n", ptr->name, type,
size);
switch (type) {
case CODEC_G_STATUS: /* get last status */
if (size != sizeof(int))
return -EFAULT;
zr36060_read_status(ptr);
*ival = ptr->status;
break;
case CODEC_G_CODEC_MODE:
if (size != sizeof(int))
return -EFAULT;
*ival = CODEC_MODE_BJPG;
break;
case CODEC_S_CODEC_MODE:
if (size != sizeof(int))
return -EFAULT;
if (*ival != CODEC_MODE_BJPG)
return -EINVAL;
/* not needed, do nothing */
return 0;
case CODEC_G_VFE:
case CODEC_S_VFE:
/* not needed, do nothing */
return 0;
case CODEC_S_MMAP:
/* not available, give an error */
return -ENXIO;
case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */
if (size != sizeof(int))
return -EFAULT;
*ival = ptr->total_code_vol;
break;
case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */
if (size != sizeof(int))
return -EFAULT;
ptr->total_code_vol = *ival;
ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
break;
case CODEC_G_JPEG_SCALE: /* get scaling factor */
if (size != sizeof(int))
return -EFAULT;
*ival = zr36060_read_scalefactor(ptr);
break;
case CODEC_S_JPEG_SCALE: /* set scaling factor */
if (size != sizeof(int))
return -EFAULT;
ptr->scalefact = *ival;
break;
case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */
struct jpeg_app_marker *app = data;
if (size != sizeof(struct jpeg_app_marker))
return -EFAULT;
*app = ptr->app;
break;
}
case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */
struct jpeg_app_marker *app = data;
if (size != sizeof(struct jpeg_app_marker))
return -EFAULT;
ptr->app = *app;
break;
}
case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */
struct jpeg_com_marker *com = data;
if (size != sizeof(struct jpeg_com_marker))
return -EFAULT;
*com = ptr->com;
break;
}
case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */
struct jpeg_com_marker *com = data;
if (size != sizeof(struct jpeg_com_marker))
return -EFAULT;
ptr->com = *com;
break;
}
default:
return -EINVAL;
}
return size;
}
/* =========================================================================
* Exit and unregister function:
* Deinitializes Zoran's JPEG processor
* =========================================================================
*/
static int zr36060_unset(struct videocodec *codec)
{
struct zr36060 *ptr = codec->data;
struct zoran *zr = videocodec_to_zoran(codec);
if (ptr) {
/* do wee need some codec deinit here, too ???? */
zrdev_dbg(zr, "%s: finished codec #%d\n", ptr->name, ptr->num);
kfree(ptr);
codec->data = NULL;
zr36060_codecs--;
return 0;
}
return -EFAULT;
}
/* =========================================================================
* Setup and registry function:
* Initializes Zoran's JPEG processor
* Also sets pixel size, average code size, mode (compr./decompr.)
* (the given size is determined by the processor with the video interface)
* =========================================================================
*/
static int zr36060_setup(struct videocodec *codec)
{
struct zr36060 *ptr;
struct zoran *zr = videocodec_to_zoran(codec);
int res;
zrdev_dbg(zr, "zr36060: initializing MJPEG subsystem #%d.\n",
zr36060_codecs);
if (zr36060_codecs == MAX_CODECS) {
zrdev_err(zr, "zr36060: Can't attach more codecs!\n");
return -ENOSPC;
}
//mem structure init
ptr = kzalloc(sizeof(*ptr), GFP_KERNEL);
codec->data = ptr;
if (!ptr)
return -ENOMEM;
snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", zr36060_codecs);
ptr->num = zr36060_codecs++;
ptr->codec = codec;
//testing
res = zr36060_basic_test(ptr);
if (res < 0) {
zr36060_unset(codec);
return res;
}
//final setup
memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8);
memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8);
ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag (what is the difference?) */
ptr->mode = CODEC_DO_COMPRESSION;
ptr->width = 384;
ptr->height = 288;
ptr->total_code_vol = 16000; /* CHECKME */
ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */
ptr->scalefact = 0x100;
ptr->dri = 1; /* CHECKME, was 8 is 1 */
/* by default, no COM or APP markers - app should set those */
ptr->com.len = 0;
ptr->app.appn = 0;
ptr->app.len = 0;
zr36060_init(ptr);
zrdev_info(zr, "%s: codec attached and running\n", ptr->name);
return 0;
}
static const struct videocodec zr36060_codec = {
.name = "zr36060",
.magic = 0L, // magic not used
.flags =
CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
CODEC_FLAG_DECODER | CODEC_FLAG_VFE,
.type = CODEC_TYPE_ZR36060,
.setup = zr36060_setup, // functionality
.unset = zr36060_unset,
.set_mode = zr36060_set_mode,
.set_video = zr36060_set_video,
.control = zr36060_control,
// others are not used
};
int zr36060_init_module(void)
{
zr36060_codecs = 0;
return videocodec_register(&zr36060_codec);
}
void zr36060_cleanup_module(void)
{
if (zr36060_codecs) {
pr_debug("zr36060: something's wrong - %d codecs left somehow.\n",
zr36060_codecs);
}
/* however, we can't just stay alive */
videocodec_unregister(&zr36060_codec);
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку