WSL2-Linux-Kernel/drivers/cxl/core/pci.c

625 строки
15 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2021 Intel Corporation. All rights reserved. */
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/pci-doe.h>
#include <cxlpci.h>
#include <cxlmem.h>
#include <cxl.h>
#include "core.h"
/**
* DOC: cxl core pci
*
* Compute Express Link protocols are layered on top of PCIe. CXL core provides
* a set of helpers for CXL interactions which occur via PCIe.
*/
static unsigned short media_ready_timeout = 60;
module_param(media_ready_timeout, ushort, 0644);
MODULE_PARM_DESC(media_ready_timeout, "seconds to wait for media ready");
struct cxl_walk_context {
struct pci_bus *bus;
struct cxl_port *port;
int type;
int error;
int count;
};
static int match_add_dports(struct pci_dev *pdev, void *data)
{
struct cxl_walk_context *ctx = data;
struct cxl_port *port = ctx->port;
int type = pci_pcie_type(pdev);
struct cxl_register_map map;
struct cxl_dport *dport;
u32 lnkcap, port_num;
int rc;
if (pdev->bus != ctx->bus)
return 0;
if (!pci_is_pcie(pdev))
return 0;
if (type != ctx->type)
return 0;
if (pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
&lnkcap))
return 0;
rc = cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
if (rc)
dev_dbg(&port->dev, "failed to find component registers\n");
port_num = FIELD_GET(PCI_EXP_LNKCAP_PN, lnkcap);
dport = devm_cxl_add_dport(port, &pdev->dev, port_num, map.resource);
if (IS_ERR(dport)) {
ctx->error = PTR_ERR(dport);
return PTR_ERR(dport);
}
ctx->count++;
return 0;
}
/**
* devm_cxl_port_enumerate_dports - enumerate downstream ports of the upstream port
* @port: cxl_port whose ->uport is the upstream of dports to be enumerated
*
* Returns a positive number of dports enumerated or a negative error
* code.
*/
int devm_cxl_port_enumerate_dports(struct cxl_port *port)
{
struct pci_bus *bus = cxl_port_to_pci_bus(port);
struct cxl_walk_context ctx;
int type;
if (!bus)
return -ENXIO;
if (pci_is_root_bus(bus))
type = PCI_EXP_TYPE_ROOT_PORT;
else
type = PCI_EXP_TYPE_DOWNSTREAM;
ctx = (struct cxl_walk_context) {
.port = port,
.bus = bus,
.type = type,
};
pci_walk_bus(bus, match_add_dports, &ctx);
if (ctx.count == 0)
return -ENODEV;
if (ctx.error)
return ctx.error;
return ctx.count;
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_port_enumerate_dports, CXL);
/*
* Wait up to @media_ready_timeout for the device to report memory
* active.
*/
int cxl_await_media_ready(struct cxl_dev_state *cxlds)
{
struct pci_dev *pdev = to_pci_dev(cxlds->dev);
int d = cxlds->cxl_dvsec;
bool active = false;
u64 md_status;
int rc, i;
for (i = media_ready_timeout; i; i--) {
u32 temp;
rc = pci_read_config_dword(
pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &temp);
if (rc)
return rc;
active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
if (active)
break;
msleep(1000);
}
if (!active) {
dev_err(&pdev->dev,
"timeout awaiting memory active after %d seconds\n",
media_ready_timeout);
return -ETIMEDOUT;
}
md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET);
if (!CXLMDEV_READY(md_status))
return -EIO;
return 0;
}
EXPORT_SYMBOL_NS_GPL(cxl_await_media_ready, CXL);
static int wait_for_valid(struct cxl_dev_state *cxlds)
{
struct pci_dev *pdev = to_pci_dev(cxlds->dev);
int d = cxlds->cxl_dvsec, rc;
u32 val;
/*
* Memory_Info_Valid: When set, indicates that the CXL Range 1 Size high
* and Size Low registers are valid. Must be set within 1 second of
* deassertion of reset to CXL device. Likely it is already set by the
* time this runs, but otherwise give a 1.5 second timeout in case of
* clock skew.
*/
rc = pci_read_config_dword(pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &val);
if (rc)
return rc;
if (val & CXL_DVSEC_MEM_INFO_VALID)
return 0;
msleep(1500);
rc = pci_read_config_dword(pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &val);
if (rc)
return rc;
if (val & CXL_DVSEC_MEM_INFO_VALID)
return 0;
return -ETIMEDOUT;
}
static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
{
struct pci_dev *pdev = to_pci_dev(cxlds->dev);
int d = cxlds->cxl_dvsec;
u16 ctrl;
int rc;
rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
if (rc < 0)
return rc;
if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val)
return 1;
ctrl &= ~CXL_DVSEC_MEM_ENABLE;
ctrl |= val;
rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl);
if (rc < 0)
return rc;
return 0;
}
static void clear_mem_enable(void *cxlds)
{
cxl_set_mem_enable(cxlds, 0);
}
static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds)
{
int rc;
rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE);
if (rc < 0)
return rc;
if (rc > 0)
return 0;
return devm_add_action_or_reset(host, clear_mem_enable, cxlds);
}
static bool range_contains(struct range *r1, struct range *r2)
{
return r1->start <= r2->start && r1->end >= r2->end;
}
/* require dvsec ranges to be covered by a locked platform window */
static int dvsec_range_allowed(struct device *dev, void *arg)
{
struct range *dev_range = arg;
struct cxl_decoder *cxld;
if (!is_root_decoder(dev))
return 0;
cxld = to_cxl_decoder(dev);
if (!(cxld->flags & CXL_DECODER_F_LOCK))
return 0;
if (!(cxld->flags & CXL_DECODER_F_RAM))
return 0;
return range_contains(&cxld->hpa_range, dev_range);
}
static void disable_hdm(void *_cxlhdm)
{
u32 global_ctrl;
struct cxl_hdm *cxlhdm = _cxlhdm;
void __iomem *hdm = cxlhdm->regs.hdm_decoder;
global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
writel(global_ctrl & ~CXL_HDM_DECODER_ENABLE,
hdm + CXL_HDM_DECODER_CTRL_OFFSET);
}
static int devm_cxl_enable_hdm(struct device *host, struct cxl_hdm *cxlhdm)
{
void __iomem *hdm = cxlhdm->regs.hdm_decoder;
u32 global_ctrl;
global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
hdm + CXL_HDM_DECODER_CTRL_OFFSET);
return devm_add_action_or_reset(host, disable_hdm, cxlhdm);
}
static bool __cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
struct cxl_hdm *cxlhdm,
struct cxl_endpoint_dvsec_info *info)
{
void __iomem *hdm = cxlhdm->regs.hdm_decoder;
struct cxl_port *port = cxlhdm->port;
struct device *dev = cxlds->dev;
struct cxl_port *root;
int i, rc, allowed;
u32 global_ctrl;
global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
/*
* If the HDM Decoder Capability is already enabled then assume
* that some other agent like platform firmware set it up.
*/
if (global_ctrl & CXL_HDM_DECODER_ENABLE) {
rc = devm_cxl_enable_mem(&port->dev, cxlds);
if (rc)
return false;
return true;
}
root = to_cxl_port(port->dev.parent);
while (!is_cxl_root(root) && is_cxl_port(root->dev.parent))
root = to_cxl_port(root->dev.parent);
if (!is_cxl_root(root)) {
dev_err(dev, "Failed to acquire root port for HDM enable\n");
return false;
}
for (i = 0, allowed = 0; info->mem_enabled && i < info->ranges; i++) {
struct device *cxld_dev;
cxld_dev = device_find_child(&root->dev, &info->dvsec_range[i],
dvsec_range_allowed);
if (!cxld_dev) {
dev_dbg(dev, "DVSEC Range%d denied by platform\n", i);
continue;
}
dev_dbg(dev, "DVSEC Range%d allowed by platform\n", i);
put_device(cxld_dev);
allowed++;
}
if (!allowed) {
cxl_set_mem_enable(cxlds, 0);
info->mem_enabled = 0;
}
/*
* Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base
* [High,Low] when HDM operation is enabled the range register values
* are ignored by the device, but the spec also recommends matching the
* DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges
* are expected even though Linux does not require or maintain that
* match. If at least one DVSEC range is enabled and allowed, skip HDM
* Decoder Capability Enable.
*/
if (info->mem_enabled)
return false;
rc = devm_cxl_enable_hdm(&port->dev, cxlhdm);
if (rc)
return false;
rc = devm_cxl_enable_mem(&port->dev, cxlds);
if (rc)
return false;
return true;
}
/**
* cxl_hdm_decode_init() - Setup HDM decoding for the endpoint
* @cxlds: Device state
* @cxlhdm: Mapped HDM decoder Capability
*
* Try to enable the endpoint's HDM Decoder Capability
*/
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
{
struct pci_dev *pdev = to_pci_dev(cxlds->dev);
struct cxl_endpoint_dvsec_info info = { 0 };
int hdm_count, rc, i, ranges = 0;
struct device *dev = &pdev->dev;
int d = cxlds->cxl_dvsec;
u16 cap, ctrl;
if (!d) {
dev_dbg(dev, "No DVSEC Capability\n");
return -ENXIO;
}
rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap);
if (rc)
return rc;
rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
if (rc)
return rc;
if (!(cap & CXL_DVSEC_MEM_CAPABLE)) {
dev_dbg(dev, "Not MEM Capable\n");
return -ENXIO;
}
/*
* It is not allowed by spec for MEM.capable to be set and have 0 legacy
* HDM decoders (values > 2 are also undefined as of CXL 2.0). As this
* driver is for a spec defined class code which must be CXL.mem
* capable, there is no point in continuing to enable CXL.mem.
*/
hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
if (!hdm_count || hdm_count > 2)
return -EINVAL;
rc = wait_for_valid(cxlds);
if (rc) {
dev_dbg(dev, "Failure awaiting MEM_INFO_VALID (%d)\n", rc);
return rc;
}
/*
* The current DVSEC values are moot if the memory capability is
* disabled, and they will remain moot after the HDM Decoder
* capability is enabled.
*/
info.mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl);
if (!info.mem_enabled)
goto hdm_init;
for (i = 0; i < hdm_count; i++) {
u64 base, size;
u32 temp;
rc = pci_read_config_dword(
pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp);
if (rc)
return rc;
size = (u64)temp << 32;
rc = pci_read_config_dword(
pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp);
if (rc)
return rc;
size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK;
rc = pci_read_config_dword(
pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp);
if (rc)
return rc;
base = (u64)temp << 32;
rc = pci_read_config_dword(
pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp);
if (rc)
return rc;
base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK;
info.dvsec_range[i] = (struct range) {
.start = base,
.end = base + size - 1
};
if (size)
ranges++;
}
info.ranges = ranges;
/*
* If DVSEC ranges are being used instead of HDM decoder registers there
* is no use in trying to manage those.
*/
hdm_init:
if (!__cxl_hdm_decode_init(cxlds, cxlhdm, &info)) {
dev_err(dev,
"Legacy range registers configuration prevents HDM operation.\n");
return -EBUSY;
}
return 0;
}
EXPORT_SYMBOL_NS_GPL(cxl_hdm_decode_init, CXL);
#define CXL_DOE_TABLE_ACCESS_REQ_CODE 0x000000ff
#define CXL_DOE_TABLE_ACCESS_REQ_CODE_READ 0
#define CXL_DOE_TABLE_ACCESS_TABLE_TYPE 0x0000ff00
#define CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA 0
#define CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE 0xffff0000
#define CXL_DOE_TABLE_ACCESS_LAST_ENTRY 0xffff
#define CXL_DOE_PROTOCOL_TABLE_ACCESS 2
static struct pci_doe_mb *find_cdat_doe(struct device *uport)
{
struct cxl_memdev *cxlmd;
struct cxl_dev_state *cxlds;
unsigned long index;
void *entry;
cxlmd = to_cxl_memdev(uport);
cxlds = cxlmd->cxlds;
xa_for_each(&cxlds->doe_mbs, index, entry) {
struct pci_doe_mb *cur = entry;
if (pci_doe_supports_prot(cur, PCI_DVSEC_VENDOR_ID_CXL,
CXL_DOE_PROTOCOL_TABLE_ACCESS))
return cur;
}
return NULL;
}
#define CDAT_DOE_REQ(entry_handle) \
(FIELD_PREP(CXL_DOE_TABLE_ACCESS_REQ_CODE, \
CXL_DOE_TABLE_ACCESS_REQ_CODE_READ) | \
FIELD_PREP(CXL_DOE_TABLE_ACCESS_TABLE_TYPE, \
CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA) | \
FIELD_PREP(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE, (entry_handle)))
static void cxl_doe_task_complete(struct pci_doe_task *task)
{
complete(task->private);
}
struct cdat_doe_task {
u32 request_pl;
u32 response_pl[32];
struct completion c;
struct pci_doe_task task;
};
#define DECLARE_CDAT_DOE_TASK(req, cdt) \
struct cdat_doe_task cdt = { \
.c = COMPLETION_INITIALIZER_ONSTACK(cdt.c), \
.request_pl = req, \
.task = { \
.prot.vid = PCI_DVSEC_VENDOR_ID_CXL, \
.prot.type = CXL_DOE_PROTOCOL_TABLE_ACCESS, \
.request_pl = &cdt.request_pl, \
.request_pl_sz = sizeof(cdt.request_pl), \
.response_pl = cdt.response_pl, \
.response_pl_sz = sizeof(cdt.response_pl), \
.complete = cxl_doe_task_complete, \
.private = &cdt.c, \
} \
}
static int cxl_cdat_get_length(struct device *dev,
struct pci_doe_mb *cdat_doe,
size_t *length)
{
DECLARE_CDAT_DOE_TASK(CDAT_DOE_REQ(0), t);
int rc;
rc = pci_doe_submit_task(cdat_doe, &t.task);
if (rc < 0) {
dev_err(dev, "DOE submit failed: %d", rc);
return rc;
}
wait_for_completion(&t.c);
if (t.task.rv < sizeof(u32))
return -EIO;
*length = t.response_pl[1];
dev_dbg(dev, "CDAT length %zu\n", *length);
return 0;
}
static int cxl_cdat_read_table(struct device *dev,
struct pci_doe_mb *cdat_doe,
struct cxl_cdat *cdat)
{
size_t length = cdat->length;
u32 *data = cdat->table;
int entry_handle = 0;
do {
DECLARE_CDAT_DOE_TASK(CDAT_DOE_REQ(entry_handle), t);
size_t entry_dw;
u32 *entry;
int rc;
rc = pci_doe_submit_task(cdat_doe, &t.task);
if (rc < 0) {
dev_err(dev, "DOE submit failed: %d", rc);
return rc;
}
wait_for_completion(&t.c);
/* 1 DW header + 1 DW data min */
if (t.task.rv < (2 * sizeof(u32)))
return -EIO;
/* Get the CXL table access header entry handle */
entry_handle = FIELD_GET(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE,
t.response_pl[0]);
entry = t.response_pl + 1;
entry_dw = t.task.rv / sizeof(u32);
/* Skip Header */
entry_dw -= 1;
entry_dw = min(length / sizeof(u32), entry_dw);
/* Prevent length < 1 DW from causing a buffer overflow */
if (entry_dw) {
memcpy(data, entry, entry_dw * sizeof(u32));
length -= entry_dw * sizeof(u32);
data += entry_dw;
}
} while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY);
return 0;
}
/**
* read_cdat_data - Read the CDAT data on this port
* @port: Port to read data from
*
* This call will sleep waiting for responses from the DOE mailbox.
*/
void read_cdat_data(struct cxl_port *port)
{
struct pci_doe_mb *cdat_doe;
struct device *dev = &port->dev;
struct device *uport = port->uport;
size_t cdat_length;
int rc;
cdat_doe = find_cdat_doe(uport);
if (!cdat_doe) {
dev_dbg(dev, "No CDAT mailbox\n");
return;
}
port->cdat_available = true;
if (cxl_cdat_get_length(dev, cdat_doe, &cdat_length)) {
dev_dbg(dev, "No CDAT length\n");
return;
}
port->cdat.table = devm_kzalloc(dev, cdat_length, GFP_KERNEL);
if (!port->cdat.table)
return;
port->cdat.length = cdat_length;
rc = cxl_cdat_read_table(dev, cdat_doe, &port->cdat);
if (rc) {
/* Don't leave table data allocated on error */
devm_kfree(dev, port->cdat.table);
port->cdat.table = NULL;
port->cdat.length = 0;
dev_err(dev, "CDAT data read error\n");
}
}
EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL);