WSL2-Linux-Kernel/drivers/base/Kconfig

349 строки
12 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0
menu "Generic Driver Options"
config UEVENT_HELPER
bool "Support for uevent helper"
default y
help
The uevent helper program is forked by the kernel for
every uevent.
Before the switch to the netlink-based uevent source, this was
used to hook hotplug scripts into kernel device events. It
usually pointed to a shell script at /sbin/hotplug.
This should not be used today, because usual systems create
many events at bootup or device discovery in a very short time
frame. One forked process per event can create so many processes
that it creates a high system load, or on smaller systems
it is known to create out-of-memory situations during bootup.
config UEVENT_HELPER_PATH
string "path to uevent helper"
depends on UEVENT_HELPER
default ""
help
To disable user space helper program execution at by default
specify an empty string here. This setting can still be altered
via /proc/sys/kernel/hotplug or via /sys/kernel/uevent_helper
later at runtime.
config DEVTMPFS
bool "Maintain a devtmpfs filesystem to mount at /dev"
help
This creates a tmpfs/ramfs filesystem instance early at bootup.
In this filesystem, the kernel driver core maintains device
nodes with their default names and permissions for all
registered devices with an assigned major/minor number.
Userspace can modify the filesystem content as needed, add
symlinks, and apply needed permissions.
It provides a fully functional /dev directory, where usually
udev runs on top, managing permissions and adding meaningful
symlinks.
In very limited environments, it may provide a sufficient
functional /dev without any further help. It also allows simple
rescue systems, and reliably handles dynamic major/minor numbers.
Notice: if CONFIG_TMPFS isn't enabled, the simpler ramfs
file system will be used instead.
config DEVTMPFS_MOUNT
bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
depends on DEVTMPFS
help
This will instruct the kernel to automatically mount the
devtmpfs filesystem at /dev, directly after the kernel has
mounted the root filesystem. The behavior can be overridden
with the commandline parameter: devtmpfs.mount=0|1.
This option does not affect initramfs based booting, here
the devtmpfs filesystem always needs to be mounted manually
after the rootfs is mounted.
With this option enabled, it allows to bring up a system in
rescue mode with init=/bin/sh, even when the /dev directory
on the rootfs is completely empty.
config STANDALONE
bool "Select only drivers that don't need compile-time external firmware"
default y
help
Select this option if you don't have magic firmware for drivers that
need it.
If unsure, say Y.
config PREVENT_FIRMWARE_BUILD
bool "Prevent firmware from being built"
default y
help
Say yes to avoid building firmware. Firmware is usually shipped
with the driver and only when updating the firmware should a
rebuild be made.
If unsure, say Y here.
config FW_LOADER
tristate "Userspace firmware loading support" if EXPERT
default y
---help---
This option is provided for the case where none of the in-tree modules
require userspace firmware loading support, but a module built
out-of-tree does.
config FIRMWARE_IN_KERNEL
bool "Include in-kernel firmware blobs in kernel binary"
depends on FW_LOADER
default y
help
The kernel source tree includes a number of firmware 'blobs'
that are used by various drivers. The recommended way to
use these is to run "make firmware_install", which, after
converting ihex files to binary, copies all of the needed
binary files in firmware/ to /lib/firmware/ on your system so
that they can be loaded by userspace helpers on request.
Enabling this option will build each required firmware blob
into the kernel directly, where request_firmware() will find
them without having to call out to userspace. This may be
useful if your root file system requires a device that uses
such firmware and do not wish to use an initrd.
This single option controls the inclusion of firmware for
every driver that uses request_firmware() and ships its
firmware in the kernel source tree, which avoids a
proliferation of 'Include firmware for xxx device' options.
Say 'N' and let firmware be loaded from userspace.
config EXTRA_FIRMWARE
string "External firmware blobs to build into the kernel binary"
depends on FW_LOADER
help
This option allows firmware to be built into the kernel for the case
where the user either cannot or doesn't want to provide it from
userspace at runtime (for example, when the firmware in question is
required for accessing the boot device, and the user doesn't want to
use an initrd).
This option is a string and takes the (space-separated) names of the
firmware files -- the same names that appear in MODULE_FIRMWARE()
and request_firmware() in the source. These files should exist under
the directory specified by the EXTRA_FIRMWARE_DIR option, which is
by default the firmware subdirectory of the kernel source tree.
For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
the usb8388.bin file into the firmware directory, and build the kernel.
Then any request_firmware("usb8388.bin") will be satisfied internally
without needing to call out to userspace.
WARNING: If you include additional firmware files into your binary
kernel image that are not available under the terms of the GPL,
then it may be a violation of the GPL to distribute the resulting
image since it combines both GPL and non-GPL work. You should
consult a lawyer of your own before distributing such an image.
config EXTRA_FIRMWARE_DIR
string "Firmware blobs root directory"
depends on EXTRA_FIRMWARE != ""
default "/lib/firmware"
help
This option controls the directory in which the kernel build system
looks for the firmware files listed in the EXTRA_FIRMWARE option.
config FW_LOADER_USER_HELPER
bool
config FW_LOADER_USER_HELPER_FALLBACK
bool "Fallback user-helper invocation for firmware loading"
depends on FW_LOADER
select FW_LOADER_USER_HELPER
help
This option enables / disables the invocation of user-helper
(e.g. udev) for loading firmware files as a fallback after the
direct file loading in kernel fails. The user-mode helper is
no longer required unless you have a special firmware file that
resides in a non-standard path. Moreover, the udev support has
been deprecated upstream.
If you are unsure about this, say N here.
config WANT_DEV_COREDUMP
bool
help
Drivers should "select" this option if they desire to use the
device coredump mechanism.
config ALLOW_DEV_COREDUMP
bool "Allow device coredump" if EXPERT
default y
help
This option controls if the device coredump mechanism is available or
not; if disabled, the mechanism will be omitted even if drivers that
can use it are enabled.
Say 'N' for more sensitive systems or systems that don't want
to ever access the information to not have the code, nor keep any
data.
If unsure, say Y.
config DEV_COREDUMP
bool
default y if WANT_DEV_COREDUMP
depends on ALLOW_DEV_COREDUMP
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"
depends on DEBUG_KERNEL
help
Say Y here if you want the Driver core to produce a bunch of
debug messages to the system log. Select this if you are having a
problem with the driver core and want to see more of what is
going on.
If you are unsure about this, say N here.
config DEBUG_DEVRES
bool "Managed device resources verbose debug messages"
depends on DEBUG_KERNEL
help
This option enables kernel parameter devres.log. If set to
non-zero, devres debug messages are printed. Select this if
you are having a problem with devres or want to debug
resource management for a managed device. devres.log can be
switched on and off from sysfs node.
If you are unsure about this, Say N here.
config DEBUG_TEST_DRIVER_REMOVE
bool "Test driver remove calls during probe (UNSTABLE)"
depends on DEBUG_KERNEL
help
Say Y here if you want the Driver core to test driver remove functions
by calling probe, remove, probe. This tests the remove path without
having to unbind the driver or unload the driver module.
This option is expected to find errors and may render your system
unusable. You should say N here unless you are explicitly looking to
test this functionality.
source "drivers/base/test/Kconfig"
config SYS_HYPERVISOR
bool
default n
config GENERIC_CPU_DEVICES
bool
default n
config GENERIC_CPU_AUTOPROBE
bool
config SOC_BUS
bool
select GLOB
source "drivers/base/regmap/Kconfig"
config DMA_SHARED_BUFFER
bool
default n
select ANON_INODES
help
This option enables the framework for buffer-sharing between
multiple drivers. A buffer is associated with a file using driver
APIs extension; the file's descriptor can then be passed on to other
driver.
config DMA_FENCE_TRACE
bool "Enable verbose DMA_FENCE_TRACE messages"
depends on DMA_SHARED_BUFFER
help
Enable the DMA_FENCE_TRACE printks. This will add extra
spam to the console log, but will make it easier to diagnose
lockup related problems for dma-buffers shared across multiple
devices.
config DMA_CMA
bool "DMA Contiguous Memory Allocator"
depends on HAVE_DMA_CONTIGUOUS && CMA
help
This enables the Contiguous Memory Allocator which allows drivers
to allocate big physically-contiguous blocks of memory for use with
hardware components that do not support I/O map nor scatter-gather.
You can disable CMA by specifying "cma=0" on the kernel's command
line.
For more information see <include/linux/dma-contiguous.h>.
If unsure, say "n".
if DMA_CMA
comment "Default contiguous memory area size:"
config CMA_SIZE_MBYTES
int "Size in Mega Bytes"
depends on !CMA_SIZE_SEL_PERCENTAGE
default 0 if X86
default 16
help
Defines the size (in MiB) of the default memory area for Contiguous
Memory Allocator. If the size of 0 is selected, CMA is disabled by
default, but it can be enabled by passing cma=size[MG] to the kernel.
config CMA_SIZE_PERCENTAGE
int "Percentage of total memory"
depends on !CMA_SIZE_SEL_MBYTES
default 0 if X86
default 10
help
Defines the size of the default memory area for Contiguous Memory
Allocator as a percentage of the total memory in the system.
If 0 percent is selected, CMA is disabled by default, but it can be
enabled by passing cma=size[MG] to the kernel.
choice
prompt "Selected region size"
default CMA_SIZE_SEL_MBYTES
config CMA_SIZE_SEL_MBYTES
bool "Use mega bytes value only"
config CMA_SIZE_SEL_PERCENTAGE
bool "Use percentage value only"
config CMA_SIZE_SEL_MIN
bool "Use lower value (minimum)"
config CMA_SIZE_SEL_MAX
bool "Use higher value (maximum)"
endchoice
config CMA_ALIGNMENT
int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
range 4 12
default 8
help
DMA mapping framework by default aligns all buffers to the smallest
PAGE_SIZE order which is greater than or equal to the requested buffer
size. This works well for buffers up to a few hundreds kilobytes, but
for larger buffers it just a memory waste. With this parameter you can
specify the maximum PAGE_SIZE order for contiguous buffers. Larger
buffers will be aligned only to this specified order. The order is
expressed as a power of two multiplied by the PAGE_SIZE.
For example, if your system defaults to 4KiB pages, the order value
of 8 means that the buffers will be aligned up to 1MiB only.
If unsure, leave the default value "8".
endif
config GENERIC_ARCH_TOPOLOGY
bool
help
Enable support for architectures common topology code: e.g., parsing
CPU capacity information from DT, usage of such information for
appropriate scaling, sysfs interface for changing capacity values at
runtime.
endmenu