WSL2-Linux-Kernel/drivers/usb
Sarah Sharp 04dd950d92 USB: xhci: Set transfer descriptor size field correctly.
The transfer descriptor (TD) is a series of transfer request buffers
(TRBs) that describe the buffer pointer, length, and other
characteristics.  The xHCI controllers want to know an estimate of how
long the TD is, for caching reasons.  In each TRB, there is a "TD size"
field that provides a rough estimate of the remaining buffers to be
transmitted, including the buffer pointed to by that TRB.

The TD size is 5 bits long, and contains the remaining size in bytes,
right shifted by 10 bits.  So a remaining TD size less than 1024 would get
a zero in the TD size field, and a remaining size greater than 32767 would
get 31 in the field.

This patches fixes a bug in the TD_REMAINDER macro that is triggered when
the URB has a scatter gather list with a size bigger than 32767 bytes.
Not all host controllers pay attention to the TD size field, so the bug
will not appear on all USB 3.0 hosts.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:23 -08:00
..
atm tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: Exposing second ACM channel as tty for Nokia S60 phones. 2009-12-11 11:55:20 -08:00
core USB: fix possible null deref in init_usb_class() 2009-12-11 11:55:22 -08:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: g_multi: Multifunction Composite Gadget added 2009-12-11 11:55:23 -08:00
host USB: xhci: Set transfer descriptor size field correctly. 2009-12-11 11:55:23 -08:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc usbtest: make module param pattern writeable 2009-12-11 11:55:22 -08:00
mon USB: add scatter-gather support to usbmon 2009-12-11 11:55:20 -08:00
musb Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-12-08 08:15:29 -08:00
otg USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
serial USB: remove the auto_pm flag 2009-12-11 11:55:21 -08:00
storage USB: make urb scatter-gather support more generic 2009-12-11 11:55:14 -08:00
wusbcore USB: wusb: add wusb_phy_rate sysfs file to host controllers 2009-12-11 11:55:16 -08:00
Kconfig USB: ehci: Allow EHCI to be built on OMAP3 2009-12-11 11:55:20 -08:00
Makefile USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
README
usb-skeleton.c USB: skeleton: Correct use of ! and & 2009-12-11 11:55:14 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.