462 строки
12 KiB
C
462 строки
12 KiB
C
/*
|
|
* TI DaVinci GPIO Support
|
|
*
|
|
* Copyright (c) 2006-2007 David Brownell
|
|
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
struct davinci_gpio_regs {
|
|
u32 dir;
|
|
u32 out_data;
|
|
u32 set_data;
|
|
u32 clr_data;
|
|
u32 in_data;
|
|
u32 set_rising;
|
|
u32 clr_rising;
|
|
u32 set_falling;
|
|
u32 clr_falling;
|
|
u32 intstat;
|
|
};
|
|
|
|
#define chip2controller(chip) \
|
|
container_of(chip, struct davinci_gpio_controller, chip)
|
|
|
|
static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
|
|
static void __iomem *gpio_base;
|
|
|
|
static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
|
|
{
|
|
void __iomem *ptr;
|
|
|
|
if (gpio < 32 * 1)
|
|
ptr = gpio_base + 0x10;
|
|
else if (gpio < 32 * 2)
|
|
ptr = gpio_base + 0x38;
|
|
else if (gpio < 32 * 3)
|
|
ptr = gpio_base + 0x60;
|
|
else if (gpio < 32 * 4)
|
|
ptr = gpio_base + 0x88;
|
|
else if (gpio < 32 * 5)
|
|
ptr = gpio_base + 0xb0;
|
|
else
|
|
ptr = NULL;
|
|
return ptr;
|
|
}
|
|
|
|
static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
|
|
{
|
|
struct davinci_gpio_regs __iomem *g;
|
|
|
|
g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
|
|
|
|
return g;
|
|
}
|
|
|
|
static int __init davinci_gpio_irq_setup(void);
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
|
|
static inline int __davinci_direction(struct gpio_chip *chip,
|
|
unsigned offset, bool out, int value)
|
|
{
|
|
struct davinci_gpio_controller *d = chip2controller(chip);
|
|
struct davinci_gpio_regs __iomem *g = d->regs;
|
|
unsigned long flags;
|
|
u32 temp;
|
|
u32 mask = 1 << offset;
|
|
|
|
spin_lock_irqsave(&d->lock, flags);
|
|
temp = __raw_readl(&g->dir);
|
|
if (out) {
|
|
temp &= ~mask;
|
|
__raw_writel(mask, value ? &g->set_data : &g->clr_data);
|
|
} else {
|
|
temp |= mask;
|
|
}
|
|
__raw_writel(temp, &g->dir);
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return __davinci_direction(chip, offset, false, 0);
|
|
}
|
|
|
|
static int
|
|
davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
return __davinci_direction(chip, offset, true, value);
|
|
}
|
|
|
|
/*
|
|
* Read the pin's value (works even if it's set up as output);
|
|
* returns zero/nonzero.
|
|
*
|
|
* Note that changes are synched to the GPIO clock, so reading values back
|
|
* right after you've set them may give old values.
|
|
*/
|
|
static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct davinci_gpio_controller *d = chip2controller(chip);
|
|
struct davinci_gpio_regs __iomem *g = d->regs;
|
|
|
|
return (1 << offset) & __raw_readl(&g->in_data);
|
|
}
|
|
|
|
/*
|
|
* Assuming the pin is muxed as a gpio output, set its output value.
|
|
*/
|
|
static void
|
|
davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct davinci_gpio_controller *d = chip2controller(chip);
|
|
struct davinci_gpio_regs __iomem *g = d->regs;
|
|
|
|
__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
|
|
}
|
|
|
|
static int __init davinci_gpio_setup(void)
|
|
{
|
|
int i, base;
|
|
unsigned ngpio;
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
struct davinci_gpio_regs *regs;
|
|
|
|
if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
|
|
return 0;
|
|
|
|
/*
|
|
* The gpio banks conceptually expose a segmented bitmap,
|
|
* and "ngpio" is one more than the largest zero-based
|
|
* bit index that's valid.
|
|
*/
|
|
ngpio = soc_info->gpio_num;
|
|
if (ngpio == 0) {
|
|
pr_err("GPIO setup: how many GPIOs?\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (WARN_ON(DAVINCI_N_GPIO < ngpio))
|
|
ngpio = DAVINCI_N_GPIO;
|
|
|
|
gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
|
|
if (WARN_ON(!gpio_base))
|
|
return -ENOMEM;
|
|
|
|
for (i = 0, base = 0; base < ngpio; i++, base += 32) {
|
|
chips[i].chip.label = "DaVinci";
|
|
|
|
chips[i].chip.direction_input = davinci_direction_in;
|
|
chips[i].chip.get = davinci_gpio_get;
|
|
chips[i].chip.direction_output = davinci_direction_out;
|
|
chips[i].chip.set = davinci_gpio_set;
|
|
|
|
chips[i].chip.base = base;
|
|
chips[i].chip.ngpio = ngpio - base;
|
|
if (chips[i].chip.ngpio > 32)
|
|
chips[i].chip.ngpio = 32;
|
|
|
|
spin_lock_init(&chips[i].lock);
|
|
|
|
regs = gpio2regs(base);
|
|
chips[i].regs = regs;
|
|
chips[i].set_data = ®s->set_data;
|
|
chips[i].clr_data = ®s->clr_data;
|
|
chips[i].in_data = ®s->in_data;
|
|
|
|
gpiochip_add(&chips[i].chip);
|
|
}
|
|
|
|
soc_info->gpio_ctlrs = chips;
|
|
soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
|
|
|
|
davinci_gpio_irq_setup();
|
|
return 0;
|
|
}
|
|
pure_initcall(davinci_gpio_setup);
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/*
|
|
* We expect irqs will normally be set up as input pins, but they can also be
|
|
* used as output pins ... which is convenient for testing.
|
|
*
|
|
* NOTE: The first few GPIOs also have direct INTC hookups in addition
|
|
* to their GPIOBNK0 irq, with a bit less overhead.
|
|
*
|
|
* All those INTC hookups (direct, plus several IRQ banks) can also
|
|
* serve as EDMA event triggers.
|
|
*/
|
|
|
|
static void gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
|
|
u32 mask = (u32) irq_data_get_irq_handler_data(d);
|
|
|
|
__raw_writel(mask, &g->clr_falling);
|
|
__raw_writel(mask, &g->clr_rising);
|
|
}
|
|
|
|
static void gpio_irq_enable(struct irq_data *d)
|
|
{
|
|
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
|
|
u32 mask = (u32) irq_data_get_irq_handler_data(d);
|
|
unsigned status = irqd_get_trigger_type(d);
|
|
|
|
status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
|
|
if (!status)
|
|
status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
|
|
|
|
if (status & IRQ_TYPE_EDGE_FALLING)
|
|
__raw_writel(mask, &g->set_falling);
|
|
if (status & IRQ_TYPE_EDGE_RISING)
|
|
__raw_writel(mask, &g->set_rising);
|
|
}
|
|
|
|
static int gpio_irq_type(struct irq_data *d, unsigned trigger)
|
|
{
|
|
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip gpio_irqchip = {
|
|
.name = "GPIO",
|
|
.irq_enable = gpio_irq_enable,
|
|
.irq_disable = gpio_irq_disable,
|
|
.irq_set_type = gpio_irq_type,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED,
|
|
};
|
|
|
|
static void
|
|
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
|
|
{
|
|
struct davinci_gpio_regs __iomem *g;
|
|
u32 mask = 0xffff;
|
|
struct davinci_gpio_controller *d;
|
|
|
|
d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
|
|
g = (struct davinci_gpio_regs __iomem *)d->regs;
|
|
|
|
/* we only care about one bank */
|
|
if (irq & 1)
|
|
mask <<= 16;
|
|
|
|
/* temporarily mask (level sensitive) parent IRQ */
|
|
desc->irq_data.chip->irq_mask(&desc->irq_data);
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
while (1) {
|
|
u32 status;
|
|
int n;
|
|
int res;
|
|
|
|
/* ack any irqs */
|
|
status = __raw_readl(&g->intstat) & mask;
|
|
if (!status)
|
|
break;
|
|
__raw_writel(status, &g->intstat);
|
|
|
|
/* now demux them to the right lowlevel handler */
|
|
n = d->irq_base;
|
|
if (irq & 1) {
|
|
n += 16;
|
|
status >>= 16;
|
|
}
|
|
|
|
while (status) {
|
|
res = ffs(status);
|
|
n += res;
|
|
generic_handle_irq(n - 1);
|
|
status >>= res;
|
|
}
|
|
}
|
|
desc->irq_data.chip->irq_unmask(&desc->irq_data);
|
|
/* now it may re-trigger */
|
|
}
|
|
|
|
static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct davinci_gpio_controller *d = chip2controller(chip);
|
|
|
|
if (d->irq_base >= 0)
|
|
return d->irq_base + offset;
|
|
else
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
|
|
/* NOTE: we assume for now that only irqs in the first gpio_chip
|
|
* can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
|
|
*/
|
|
if (offset < soc_info->gpio_unbanked)
|
|
return soc_info->gpio_irq + offset;
|
|
else
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
|
|
{
|
|
struct davinci_gpio_controller *d;
|
|
struct davinci_gpio_regs __iomem *g;
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
u32 mask;
|
|
|
|
d = (struct davinci_gpio_controller *)data->handler_data;
|
|
g = (struct davinci_gpio_regs __iomem *)d->regs;
|
|
mask = __gpio_mask(data->irq - soc_info->gpio_irq);
|
|
|
|
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
? &g->set_falling : &g->clr_falling);
|
|
__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
|
|
? &g->set_rising : &g->clr_rising);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NOTE: for suspend/resume, probably best to make a platform_device with
|
|
* suspend_late/resume_resume calls hooking into results of the set_wake()
|
|
* calls ... so if no gpios are wakeup events the clock can be disabled,
|
|
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
|
|
* (dm6446) can be set appropriately for GPIOV33 pins.
|
|
*/
|
|
|
|
static int __init davinci_gpio_irq_setup(void)
|
|
{
|
|
unsigned gpio, irq, bank;
|
|
struct clk *clk;
|
|
u32 binten = 0;
|
|
unsigned ngpio, bank_irq;
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
struct davinci_gpio_regs __iomem *g;
|
|
|
|
ngpio = soc_info->gpio_num;
|
|
|
|
bank_irq = soc_info->gpio_irq;
|
|
if (bank_irq == 0) {
|
|
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk = clk_get(NULL, "gpio");
|
|
if (IS_ERR(clk)) {
|
|
printk(KERN_ERR "Error %ld getting gpio clock?\n",
|
|
PTR_ERR(clk));
|
|
return PTR_ERR(clk);
|
|
}
|
|
clk_prepare_enable(clk);
|
|
|
|
/* Arrange gpio_to_irq() support, handling either direct IRQs or
|
|
* banked IRQs. Having GPIOs in the first GPIO bank use direct
|
|
* IRQs, while the others use banked IRQs, would need some setup
|
|
* tweaks to recognize hardware which can do that.
|
|
*/
|
|
for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
|
|
chips[bank].chip.to_irq = gpio_to_irq_banked;
|
|
chips[bank].irq_base = soc_info->gpio_unbanked
|
|
? -EINVAL
|
|
: (soc_info->intc_irq_num + gpio);
|
|
}
|
|
|
|
/*
|
|
* AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
|
|
* controller only handling trigger modes. We currently assume no
|
|
* IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
|
|
*/
|
|
if (soc_info->gpio_unbanked) {
|
|
static struct irq_chip_type gpio_unbanked;
|
|
|
|
/* pass "bank 0" GPIO IRQs to AINTC */
|
|
chips[0].chip.to_irq = gpio_to_irq_unbanked;
|
|
binten = BIT(0);
|
|
|
|
/* AINTC handles mask/unmask; GPIO handles triggering */
|
|
irq = bank_irq;
|
|
gpio_unbanked = *container_of(irq_get_chip(irq),
|
|
struct irq_chip_type, chip);
|
|
gpio_unbanked.chip.name = "GPIO-AINTC";
|
|
gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked;
|
|
|
|
/* default trigger: both edges */
|
|
g = gpio2regs(0);
|
|
__raw_writel(~0, &g->set_falling);
|
|
__raw_writel(~0, &g->set_rising);
|
|
|
|
/* set the direct IRQs up to use that irqchip */
|
|
for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
|
|
irq_set_chip(irq, &gpio_unbanked.chip);
|
|
irq_set_handler_data(irq, &chips[gpio / 32]);
|
|
irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
|
|
}
|
|
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
|
|
* then chain through our own handler.
|
|
*/
|
|
for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
|
|
gpio < ngpio;
|
|
bank++, bank_irq++) {
|
|
unsigned i;
|
|
|
|
/* disabled by default, enabled only as needed */
|
|
g = gpio2regs(gpio);
|
|
__raw_writel(~0, &g->clr_falling);
|
|
__raw_writel(~0, &g->clr_rising);
|
|
|
|
/* set up all irqs in this bank */
|
|
irq_set_chained_handler(bank_irq, gpio_irq_handler);
|
|
|
|
/*
|
|
* Each chip handles 32 gpios, and each irq bank consists of 16
|
|
* gpio irqs. Pass the irq bank's corresponding controller to
|
|
* the chained irq handler.
|
|
*/
|
|
irq_set_handler_data(bank_irq, &chips[gpio / 32]);
|
|
|
|
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
|
|
irq_set_chip(irq, &gpio_irqchip);
|
|
irq_set_chip_data(irq, (__force void *)g);
|
|
irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
|
|
irq_set_handler(irq, handle_simple_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
binten |= BIT(bank);
|
|
}
|
|
|
|
done:
|
|
/* BINTEN -- per-bank interrupt enable. genirq would also let these
|
|
* bits be set/cleared dynamically.
|
|
*/
|
|
__raw_writel(binten, gpio_base + 0x08);
|
|
|
|
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
|
|
|
|
return 0;
|
|
}
|