.. |
Kconfig
|
watchdog: tqmx86: Add watchdog driver for the IO controller
|
2018-12-24 13:15:07 +01:00 |
Makefile
|
watchdog: tqmx86: Add watchdog driver for the IO controller
|
2018-12-24 13:15:07 +01:00 |
acquirewdt.c
|
…
|
|
advantechwdt.c
|
watchdog: advantechwdt: mark expected switch fall-through
|
2017-12-28 20:45:28 +01:00 |
alim1535_wdt.c
|
watchdog: alim1535_wdt: mark expected switch fall-through
|
2017-12-28 20:45:28 +01:00 |
alim7101_wdt.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
ar7_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
armada_37xx_wdt.c
|
watchdog: armada_37xx_wdt: use do_div for u64 division
|
2018-10-13 15:19:43 +02:00 |
asm9260_wdt.c
|
watchdog: asm9260_wdt: make array mode_name static, shrinks object size
|
2018-12-22 12:15:31 +01:00 |
aspeed_wdt.c
|
aspeed: watchdog: Set bootstatus during probe
|
2018-04-16 10:22:40 +02:00 |
at91rm9200_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
at91sam9_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
at91sam9_wdt.h
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
ath79_wdt.c
|
…
|
|
atlas7_wdt.c
|
…
|
|
bcm47xx_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
bcm63xx_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
bcm2835_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
bcm7038_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
bcm_kona_wdt.c
|
watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
|
2018-12-22 12:15:32 +01:00 |
booke_wdt.c
|
watchdog: fix a small number of "watchog" typos in comments
|
2018-10-02 13:32:25 +02:00 |
cadence_wdt.c
|
watchdog: simplify getting .drvdata
|
2018-05-21 21:24:40 +02:00 |
coh901327_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
cpu5wdt.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
cpwd.c
|
watchdog: cpwd: add of_node_put()
|
2018-12-09 15:03:27 +01:00 |
da9052_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
da9055_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
da9062_wdt.c
|
watchdog: da9062: remove unused code
|
2018-06-06 10:45:33 +02:00 |
da9063_wdt.c
|
watchdog: da9063: remove duplicated timeout_to_sel calls
|
2018-06-07 12:41:43 +02:00 |
davinci_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
diag288_wdt.c
|
watchdog: constify watchdog_ops and watchdog_info structures
|
2017-09-09 20:29:53 +02:00 |
digicolor_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
dw_wdt.c
|
watchdog: dw: save/restore control and timeout across suspend/resume
|
2018-03-13 19:14:19 +01:00 |
ebc-c384_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
ep93xx_wdt.c
|
…
|
|
eurotechwdt.c
|
watchdog: eurotechwdt: mark expected switch fall-through
|
2017-12-28 20:45:51 +01:00 |
f71808e_wdt.c
|
watchdog: f71808e_wdt: Fix WD_EN register read
|
2018-03-10 11:45:07 +01:00 |
ftwdt010_wdt.c
|
watchdog: ftwdt010: Make interrupt optional
|
2017-12-28 20:45:02 +01:00 |
gef_wdt.c
|
…
|
|
geodewdt.c
|
…
|
|
gpio_wdt.c
|
watchdog: gpio: change order for setting default timeout
|
2018-03-03 17:04:15 +01:00 |
hpwdt.c
|
watchdog/hpwdt: Update driver version.
|
2018-12-22 12:15:31 +01:00 |
i6300esb.c
|
watchdog: i6300esb: remove info message and version number
|
2017-12-28 20:45:18 +01:00 |
iTCO_vendor.h
|
watchdog: iTCO_wdt: Remove unused hooks
|
2018-10-02 13:32:25 +02:00 |
iTCO_vendor_support.c
|
watchdog: iTCO_wdt: Remove unused hooks
|
2018-10-02 13:32:25 +02:00 |
iTCO_wdt.c
|
watchdog: iTCO_wdt: Remove unused hooks
|
2018-10-02 13:32:25 +02:00 |
ib700wdt.c
|
watchdog: ib700wdt: mark expected switch fall-through
|
2017-12-28 20:45:52 +01:00 |
ibmasr.c
|
…
|
|
ie6xx_wdt.c
|
watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
|
2018-12-22 12:15:32 +01:00 |
imgpdc_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
imx2_wdt.c
|
watchdog: imx2_wdt: Switch to SPDX identifier
|
2018-08-02 15:57:11 +02:00 |
indydog.c
|
…
|
|
intel-mid_wdt.c
|
watchdog: intel-mid_wdt: Keep watchdog running
|
2017-06-05 20:37:35 +02:00 |
intel_scu_watchdog.c
|
…
|
|
intel_scu_watchdog.h
|
…
|
|
iop_wdt.c
|
…
|
|
it87_wdt.c
|
watchdog: it87_wdt: constify watchdog_ops structure
|
2017-09-09 20:06:25 +02:00 |
it8712f_wdt.c
|
…
|
|
ixp4xx_wdt.c
|
…
|
|
jz4740_wdt.c
|
watchdog: JZ4740: Drop module remove function
|
2018-05-14 23:58:23 +01:00 |
kempld_wdt.c
|
include/linux/compiler*.h: make compiler-*.h mutually exclusive
|
2018-08-22 17:31:34 -07:00 |
ks8695_wdt.c
|
…
|
|
lantiq_wdt.c
|
watchdog: lantiq: add get_timeleft callback
|
2018-10-02 13:32:27 +02:00 |
loongson1_wdt.c
|
…
|
|
lpc18xx_wdt.c
|
watchdog: lpc18xx: remove assignment of unused ret-value
|
2018-03-03 17:04:16 +01:00 |
m54xx_wdt.c
|
…
|
|
machzwd.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
max63xx_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
max77620_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
mei_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
mena21_wdt.c
|
watchdog: mena21_wdt: Convert to GPIO descriptors
|
2018-12-22 12:15:34 +01:00 |
menf21bmc_wdt.c
|
…
|
|
menz69_wdt.c
|
watchdog: add driver for the MEN 16z069 IP-Core
|
2018-08-02 15:57:12 +02:00 |
meson_gxbb_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
meson_wdt.c
|
watchdog: meson: allow setting timeout in devicetree
|
2018-03-03 17:04:14 +01:00 |
mixcomwd.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
moxart_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
mpc8xxx_wdt.c
|
watchdog: mpc8xxx: provide boot status
|
2018-10-13 15:19:38 +02:00 |
mt7621_wdt.c
|
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
|
2018-01-21 12:44:59 +01:00 |
mtk_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
mtx-1_wdt.c
|
watchdog: mtx-1: Convert to use GPIO descriptor
|
2018-12-24 08:27:56 +01:00 |
mv64x60_wdt.c
|
…
|
|
ni903x_wdt.c
|
…
|
|
nic7018_wdt.c
|
…
|
|
npcm_wdt.c
|
watchdog: Add Nuvoton NPCM watchdog driver
|
2018-03-24 10:19:39 +01:00 |
nuc900_wdt.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
nv_tco.c
|
…
|
|
nv_tco.h
|
…
|
|
octeon-wdt-main.c
|
watchdog: octeon-wdt: Add support for 78XX SOCs.
|
2017-09-04 21:19:03 +02:00 |
octeon-wdt-nmi.S
|
watchdog: octeon-wdt: Remove old boot vector code.
|
2017-09-04 21:19:03 +02:00 |
of_xilinx_wdt.c
|
watchdog: simplify getting .drvdata
|
2018-05-21 21:24:40 +02:00 |
omap_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
omap_wdt.h
|
…
|
|
orion_wdt.c
|
watchdog: orion_wdt: Mark watchdog as active when running at probe
|
2018-08-02 15:57:09 +02:00 |
pc87413_wdt.c
|
…
|
|
pcwd.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
pcwd_pci.c
|
watchdog: pcwd_pci: mark expected switch fall-through
|
2017-12-28 20:45:29 +01:00 |
pcwd_usb.c
|
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
|
2017-12-28 20:45:50 +01:00 |
pic32-dmt.c
|
…
|
|
pic32-wdt.c
|
…
|
|
pika_wdt.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
pm8916_wdt.c
|
watchdog: Add pm8916 watchdog driver
|
2018-12-22 12:15:33 +01:00 |
pnx833x_wdt.c
|
…
|
|
pnx4008_wdt.c
|
watchdog: pnx4008: make use of timeout-secs provided in devicetree
|
2018-03-03 17:04:13 +01:00 |
pretimeout_noop.c
|
…
|
|
pretimeout_panic.c
|
…
|
|
qcom-wdt.c
|
watchdog: qcom: Check for platform_get_resource() failure
|
2017-09-09 20:50:35 +02:00 |
rave-sp-wdt.c
|
watchdog: Add RAVE SP watchdog driver
|
2018-01-08 10:08:36 +00:00 |
rc32434_wdt.c
|
…
|
|
rdc321x_wdt.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
renesas_wdt.c
|
watchdog: renesas_wdt: don't keep timer value during suspend/resume
|
2018-12-22 12:15:32 +01:00 |
retu_wdt.c
|
…
|
|
riowd.c
|
…
|
|
rn5t618_wdt.c
|
…
|
|
rt2880_wdt.c
|
watchdog: constify watchdog_ops and watchdog_info structures
|
2017-09-09 20:29:53 +02:00 |
rtd119x_wdt.c
|
watchdog: Add Realtek RTD1295
|
2017-12-28 20:44:39 +01:00 |
rza_wdt.c
|
watchdog: rza_wdt: Support longer timeouts
|
2018-10-02 13:32:29 +02:00 |
s3c2410_wdt.c
|
watchdog: s3c2410: Minor code cleanup
|
2017-06-05 20:38:52 +02:00 |
sa1100_wdt.c
|
…
|
|
sama5d4_wdt.c
|
watchdog: sama5d4: fix timeout-sec usage
|
2018-10-02 13:32:26 +02:00 |
sb_wdog.c
|
…
|
|
sbc60xxwdt.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
sbc7240_wdt.c
|
…
|
|
sbc8360.c
|
…
|
|
sbc_epx_c3.c
|
…
|
|
sbc_fitpc2_wdt.c
|
…
|
|
sbsa_gwdt.c
|
watchdog: sbsa: use 32-bit read for WCV
|
2018-03-03 15:52:32 +01:00 |
sc520_wdt.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
sc1200wdt.c
|
watchdog: sc1200: constify pnp_device_id
|
2017-09-09 21:14:46 +02:00 |
sch311x_wdt.c
|
watchdog: sch311x_wdt: Mark expected switch fall-through
|
2018-04-16 10:22:39 +02:00 |
scx200_wdt.c
|
kbuild: announce removal of SUBDIRS if used
|
2018-12-01 22:21:56 +09:00 |
shwdt.c
|
treewide: setup_timer() -> timer_setup()
|
2017-11-21 15:57:07 -08:00 |
sirfsoc_wdt.c
|
watchdog: sirfsoc: allow setting timeout in devicetree
|
2018-03-03 17:04:13 +01:00 |
smsc37b787_wdt.c
|
…
|
|
softdog.c
|
…
|
|
sp805_wdt.c
|
watchdog: sp805: Add clock-frequency property
|
2018-08-06 17:12:41 +02:00 |
sp5100_tco.c
|
watchdog: sp5100_tco: Add support for recent FCH versions
|
2018-01-21 12:56:37 +01:00 |
sp5100_tco.h
|
watchdog: sp5100_tco: Add support for recent FCH versions
|
2018-01-21 12:56:37 +01:00 |
sprd_wdt.c
|
watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
|
2018-08-02 15:57:12 +02:00 |
st_lpc_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
stm32_iwdg.c
|
watchdog: stm32: add pclk feature for stm32mp1
|
2018-08-02 15:57:09 +02:00 |
stmp3xxx_rtc_wdt.c
|
watchdog: stmp3xxx: Switch to SPDX identifier
|
2018-08-02 15:57:11 +02:00 |
sun4v_wdt.c
|
…
|
|
sunxi_wdt.c
|
watchdog: sunxi: allow setting timeout in devicetree
|
2018-03-03 17:04:13 +01:00 |
tangox_wdt.c
|
headers: separate linux/mod_devicetable.h from linux/platform_device.h
|
2018-07-07 17:52:26 +02:00 |
tegra_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
tqmx86_wdt.c
|
watchdog: tqmx86: Add watchdog driver for the IO controller
|
2018-12-24 13:15:07 +01:00 |
ts72xx_wdt.c
|
watchdog: ts72xx_wdt: constify watchdog_ops structure
|
2017-09-09 20:06:14 +02:00 |
ts4800_wdt.c
|
watchdog: ts4800: release syscon device node in ts4800_wdt_probe()
|
2018-10-22 10:16:28 +02:00 |
twl4030_wdt.c
|
mfd: twl: Move header file out of I2C realm
|
2017-09-04 14:41:02 +01:00 |
txx9wdt.c
|
…
|
|
uniphier_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
ux500_wdt.c
|
…
|
|
via_wdt.c
|
watchdog: fix a small number of "watchog" typos in comments
|
2018-10-02 13:32:25 +02:00 |
w83627hf_wdt.c
|
watchdog: w83627hf_wdt: Add quirk for Inves system
|
2018-12-09 15:03:28 +01:00 |
w83877f_wdt.c
|
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
|
2017-11-21 15:57:05 -08:00 |
w83977f_wdt.c
|
watchdog: w83977f_wdt: Mark expected switch fall-through
|
2018-04-16 10:22:39 +02:00 |
wafer5823wdt.c
|
watchdog: wafer5823wdt: Mark expected switch fall-through
|
2018-04-16 10:22:39 +02:00 |
watchdog_core.c
|
watchdog: document watchdog_init_timeout() wdd parameter
|
2017-12-28 20:45:56 +01:00 |
watchdog_core.h
|
…
|
|
watchdog_dev.c
|
watchdog: core: fix null pointer dereference when releasing cdev
|
2018-10-02 13:32:24 +02:00 |
watchdog_pretimeout.c
|
…
|
|
watchdog_pretimeout.h
|
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
2017-11-02 11:10:55 +01:00 |
wd501p.h
|
…
|
|
wdat_wdt.c
|
watchdog: simplify getting .drvdata
|
2018-05-21 21:24:40 +02:00 |
wdrtas.c
|
…
|
|
wdt.c
|
…
|
|
wdt285.c
|
…
|
|
wdt977.c
|
…
|
|
wdt_pci.c
|
watchdog: wdt_pci: mark expected switch fall-through
|
2017-12-28 20:45:30 +01:00 |
wm831x_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
wm8350_wdt.c
|
watchdog: add SPDX identifiers for watchdog subsystem
|
2018-03-24 10:19:40 +01:00 |
xen_wdt.c
|
watchdog: xen_wdt: remove info message and version number
|
2017-12-28 20:45:44 +01:00 |
ziirave_wdt.c
|
watchdog: ziirave: constify i2c_device_id
|
2017-09-09 21:16:17 +02:00 |
zx2967_wdt.c
|
watchdog: zx2967: explicitly request exclusive reset control
|
2017-09-09 20:18:43 +02:00 |