WSL2-Linux-Kernel/drivers/gpu/drm/radeon/radeon_dp_auxch.c

205 строки
5.4 KiB
C

/*
* Copyright 2015 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Dave Airlie
*/
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
#include "nid.h"
#define AUX_RX_ERROR_FLAGS (AUX_SW_RX_OVERFLOW | \
AUX_SW_RX_HPD_DISCON | \
AUX_SW_RX_PARTIAL_BYTE | \
AUX_SW_NON_AUX_MODE | \
AUX_SW_RX_SYNC_INVALID_L | \
AUX_SW_RX_SYNC_INVALID_H | \
AUX_SW_RX_INVALID_START | \
AUX_SW_RX_RECV_NO_DET | \
AUX_SW_RX_RECV_INVALID_H | \
AUX_SW_RX_RECV_INVALID_V)
#define AUX_SW_REPLY_GET_BYTE_COUNT(x) (((x) >> 24) & 0x1f)
#define BARE_ADDRESS_SIZE 3
static const u32 aux_offset[] =
{
0x6200 - 0x6200,
0x6250 - 0x6200,
0x62a0 - 0x6200,
0x6300 - 0x6200,
0x6350 - 0x6200,
0x63a0 - 0x6200,
};
ssize_t
radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
{
struct radeon_i2c_chan *chan =
container_of(aux, struct radeon_i2c_chan, aux);
struct drm_device *dev = chan->dev;
struct radeon_device *rdev = dev->dev_private;
int ret = 0, i;
uint32_t tmp, ack = 0;
int instance = chan->rec.i2c_id & 0xf;
u8 byte;
u8 *buf = msg->buffer;
int retry_count = 0;
int bytes;
int msize;
bool is_write = false;
if (WARN_ON(msg->size > 16))
return -E2BIG;
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
is_write = true;
break;
case DP_AUX_NATIVE_READ:
case DP_AUX_I2C_READ:
break;
default:
return -EINVAL;
}
/* work out two sizes required */
msize = 0;
bytes = BARE_ADDRESS_SIZE;
if (msg->size) {
msize = msg->size - 1;
bytes++;
if (is_write)
bytes += msg->size;
}
mutex_lock(&chan->mutex);
/* switch the pad to aux mode */
tmp = RREG32(chan->rec.mask_clk_reg);
tmp |= (1 << 16);
WREG32(chan->rec.mask_clk_reg, tmp);
/* setup AUX control register with correct HPD pin */
tmp = RREG32(AUX_CONTROL + aux_offset[instance]);
tmp &= AUX_HPD_SEL(0x7);
tmp |= AUX_HPD_SEL(chan->rec.hpd);
tmp |= AUX_EN | AUX_LS_READ_EN | AUX_HPD_DISCON(0x1);
WREG32(AUX_CONTROL + aux_offset[instance], tmp);
/* atombios appears to write this twice lets copy it */
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes));
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes));
/* write the data header into the registers */
/* request, address, msg size */
byte = (msg->request << 4) | ((msg->address >> 16) & 0xf);
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte) | AUX_SW_AUTOINCREMENT_DISABLE);
byte = (msg->address >> 8) & 0xff;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
byte = msg->address & 0xff;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
byte = msize;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
/* if we are writing - write the msg buffer */
if (is_write) {
for (i = 0; i < msg->size; i++) {
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(buf[i]));
}
}
/* clear the ACK */
WREG32(AUX_SW_INTERRUPT_CONTROL + aux_offset[instance], AUX_SW_DONE_ACK);
/* write the size and GO bits */
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes) | AUX_SW_GO);
/* poll the status registers - TODO irq support */
do {
tmp = RREG32(AUX_SW_STATUS + aux_offset[instance]);
if (tmp & AUX_SW_DONE) {
break;
}
usleep_range(100, 200);
} while (retry_count++ < 1000);
if (retry_count >= 1000) {
DRM_ERROR("auxch hw never signalled completion, error %08x\n", tmp);
ret = -EIO;
goto done;
}
if (tmp & AUX_SW_RX_TIMEOUT) {
DRM_DEBUG_KMS("dp_aux_ch timed out\n");
ret = -ETIMEDOUT;
goto done;
}
if (tmp & AUX_RX_ERROR_FLAGS) {
DRM_DEBUG_KMS("dp_aux_ch flags not zero: %08x\n", tmp);
ret = -EIO;
goto done;
}
bytes = AUX_SW_REPLY_GET_BYTE_COUNT(tmp);
if (bytes) {
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_RW | AUX_SW_AUTOINCREMENT_DISABLE);
tmp = RREG32(AUX_SW_DATA + aux_offset[instance]);
ack = (tmp >> 8) & 0xff;
for (i = 0; i < bytes - 1; i++) {
tmp = RREG32(AUX_SW_DATA + aux_offset[instance]);
if (buf)
buf[i] = (tmp >> 8) & 0xff;
}
if (buf)
ret = bytes - 1;
}
WREG32(AUX_SW_INTERRUPT_CONTROL + aux_offset[instance], AUX_SW_DONE_ACK);
if (is_write)
ret = msg->size;
done:
mutex_unlock(&chan->mutex);
if (ret >= 0)
msg->reply = ack >> 4;
return ret;
}