435 строки
10 KiB
C
435 строки
10 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <lantiq_soc.h>
|
|
|
|
#define DRV_NAME "sflash-falcon"
|
|
|
|
#define FALCON_SPI_XFER_BEGIN (1 << 0)
|
|
#define FALCON_SPI_XFER_END (1 << 1)
|
|
|
|
/* Bus Read Configuration Register0 */
|
|
#define BUSRCON0 0x00000010
|
|
/* Bus Write Configuration Register0 */
|
|
#define BUSWCON0 0x00000018
|
|
/* Serial Flash Configuration Register */
|
|
#define SFCON 0x00000080
|
|
/* Serial Flash Time Register */
|
|
#define SFTIME 0x00000084
|
|
/* Serial Flash Status Register */
|
|
#define SFSTAT 0x00000088
|
|
/* Serial Flash Command Register */
|
|
#define SFCMD 0x0000008C
|
|
/* Serial Flash Address Register */
|
|
#define SFADDR 0x00000090
|
|
/* Serial Flash Data Register */
|
|
#define SFDATA 0x00000094
|
|
/* Serial Flash I/O Control Register */
|
|
#define SFIO 0x00000098
|
|
/* EBU Clock Control Register */
|
|
#define EBUCC 0x000000C4
|
|
|
|
/* Dummy Phase Length */
|
|
#define SFCMD_DUMLEN_OFFSET 16
|
|
#define SFCMD_DUMLEN_MASK 0x000F0000
|
|
/* Chip Select */
|
|
#define SFCMD_CS_OFFSET 24
|
|
#define SFCMD_CS_MASK 0x07000000
|
|
/* field offset */
|
|
#define SFCMD_ALEN_OFFSET 20
|
|
#define SFCMD_ALEN_MASK 0x00700000
|
|
/* SCK Rise-edge Position */
|
|
#define SFTIME_SCKR_POS_OFFSET 8
|
|
#define SFTIME_SCKR_POS_MASK 0x00000F00
|
|
/* SCK Period */
|
|
#define SFTIME_SCK_PER_OFFSET 0
|
|
#define SFTIME_SCK_PER_MASK 0x0000000F
|
|
/* SCK Fall-edge Position */
|
|
#define SFTIME_SCKF_POS_OFFSET 12
|
|
#define SFTIME_SCKF_POS_MASK 0x0000F000
|
|
/* Device Size */
|
|
#define SFCON_DEV_SIZE_A23_0 0x03000000
|
|
#define SFCON_DEV_SIZE_MASK 0x0F000000
|
|
/* Read Data Position */
|
|
#define SFTIME_RD_POS_MASK 0x000F0000
|
|
/* Data Output */
|
|
#define SFIO_UNUSED_WD_MASK 0x0000000F
|
|
/* Command Opcode mask */
|
|
#define SFCMD_OPC_MASK 0x000000FF
|
|
/* dlen bytes of data to write */
|
|
#define SFCMD_DIR_WRITE 0x00000100
|
|
/* Data Length offset */
|
|
#define SFCMD_DLEN_OFFSET 9
|
|
/* Command Error */
|
|
#define SFSTAT_CMD_ERR 0x20000000
|
|
/* Access Command Pending */
|
|
#define SFSTAT_CMD_PEND 0x00400000
|
|
/* Frequency set to 100MHz. */
|
|
#define EBUCC_EBUDIV_SELF100 0x00000001
|
|
/* Serial Flash */
|
|
#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
|
|
/* 8-bit multiplexed */
|
|
#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
|
|
/* Serial Flash */
|
|
#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
|
|
/* Chip Select after opcode */
|
|
#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
|
|
|
|
#define CLOCK_100M 100000000
|
|
#define CLOCK_50M 50000000
|
|
|
|
struct falcon_sflash {
|
|
u32 sfcmd; /* for caching of opcode, direction, ... */
|
|
struct spi_master *master;
|
|
};
|
|
|
|
int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
|
|
unsigned long flags)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct falcon_sflash *priv = spi_master_get_devdata(spi->master);
|
|
const u8 *txp = t->tx_buf;
|
|
u8 *rxp = t->rx_buf;
|
|
unsigned int bytelen = ((8 * t->len + 7) / 8);
|
|
unsigned int len, alen, dumlen;
|
|
u32 val;
|
|
enum {
|
|
state_init,
|
|
state_command_prepare,
|
|
state_write,
|
|
state_read,
|
|
state_disable_cs,
|
|
state_end
|
|
} state = state_init;
|
|
|
|
do {
|
|
switch (state) {
|
|
case state_init: /* detect phase of upper layer sequence */
|
|
{
|
|
/* initial write ? */
|
|
if (flags & FALCON_SPI_XFER_BEGIN) {
|
|
if (!txp) {
|
|
dev_err(dev,
|
|
"BEGIN without tx data!\n");
|
|
return -ENODATA;
|
|
}
|
|
/*
|
|
* Prepare the parts of the sfcmd register,
|
|
* which should not change during a sequence!
|
|
* Only exception are the length fields,
|
|
* especially alen and dumlen.
|
|
*/
|
|
|
|
priv->sfcmd = ((spi->chip_select
|
|
<< SFCMD_CS_OFFSET)
|
|
& SFCMD_CS_MASK);
|
|
priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
|
|
priv->sfcmd |= *txp;
|
|
txp++;
|
|
bytelen--;
|
|
if (bytelen) {
|
|
/*
|
|
* more data:
|
|
* maybe address and/or dummy
|
|
*/
|
|
state = state_command_prepare;
|
|
break;
|
|
} else {
|
|
dev_dbg(dev, "write cmd %02X\n",
|
|
priv->sfcmd & SFCMD_OPC_MASK);
|
|
}
|
|
}
|
|
/* continued write ? */
|
|
if (txp && bytelen) {
|
|
state = state_write;
|
|
break;
|
|
}
|
|
/* read data? */
|
|
if (rxp && bytelen) {
|
|
state = state_read;
|
|
break;
|
|
}
|
|
/* end of sequence? */
|
|
if (flags & FALCON_SPI_XFER_END)
|
|
state = state_disable_cs;
|
|
else
|
|
state = state_end;
|
|
break;
|
|
}
|
|
/* collect tx data for address and dummy phase */
|
|
case state_command_prepare:
|
|
{
|
|
/* txp is valid, already checked */
|
|
val = 0;
|
|
alen = 0;
|
|
dumlen = 0;
|
|
while (bytelen > 0) {
|
|
if (alen < 3) {
|
|
val = (val << 8) | (*txp++);
|
|
alen++;
|
|
} else if ((dumlen < 15) && (*txp == 0)) {
|
|
/*
|
|
* assume dummy bytes are set to 0
|
|
* from upper layer
|
|
*/
|
|
dumlen++;
|
|
txp++;
|
|
} else {
|
|
break;
|
|
}
|
|
bytelen--;
|
|
}
|
|
priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
|
|
priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
|
|
(dumlen << SFCMD_DUMLEN_OFFSET);
|
|
if (alen > 0)
|
|
ltq_ebu_w32(val, SFADDR);
|
|
|
|
dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
|
|
priv->sfcmd & SFCMD_OPC_MASK,
|
|
alen, val, dumlen);
|
|
|
|
if (bytelen > 0) {
|
|
/* continue with write */
|
|
state = state_write;
|
|
} else if (flags & FALCON_SPI_XFER_END) {
|
|
/* end of sequence? */
|
|
state = state_disable_cs;
|
|
} else {
|
|
/*
|
|
* go to end and expect another
|
|
* call (read or write)
|
|
*/
|
|
state = state_end;
|
|
}
|
|
break;
|
|
}
|
|
case state_write:
|
|
{
|
|
/* txp still valid */
|
|
priv->sfcmd |= SFCMD_DIR_WRITE;
|
|
len = 0;
|
|
val = 0;
|
|
do {
|
|
if (bytelen--)
|
|
val |= (*txp++) << (8 * len++);
|
|
if ((flags & FALCON_SPI_XFER_END)
|
|
&& (bytelen == 0)) {
|
|
priv->sfcmd &=
|
|
~SFCMD_KEEP_CS_KEEP_SELECTED;
|
|
}
|
|
if ((len == 4) || (bytelen == 0)) {
|
|
ltq_ebu_w32(val, SFDATA);
|
|
ltq_ebu_w32(priv->sfcmd
|
|
| (len<<SFCMD_DLEN_OFFSET),
|
|
SFCMD);
|
|
len = 0;
|
|
val = 0;
|
|
priv->sfcmd &= ~(SFCMD_ALEN_MASK
|
|
| SFCMD_DUMLEN_MASK);
|
|
}
|
|
} while (bytelen);
|
|
state = state_end;
|
|
break;
|
|
}
|
|
case state_read:
|
|
{
|
|
/* read data */
|
|
priv->sfcmd &= ~SFCMD_DIR_WRITE;
|
|
do {
|
|
if ((flags & FALCON_SPI_XFER_END)
|
|
&& (bytelen <= 4)) {
|
|
priv->sfcmd &=
|
|
~SFCMD_KEEP_CS_KEEP_SELECTED;
|
|
}
|
|
len = (bytelen > 4) ? 4 : bytelen;
|
|
bytelen -= len;
|
|
ltq_ebu_w32(priv->sfcmd
|
|
| (len << SFCMD_DLEN_OFFSET), SFCMD);
|
|
priv->sfcmd &= ~(SFCMD_ALEN_MASK
|
|
| SFCMD_DUMLEN_MASK);
|
|
do {
|
|
val = ltq_ebu_r32(SFSTAT);
|
|
if (val & SFSTAT_CMD_ERR) {
|
|
/* reset error status */
|
|
dev_err(dev, "SFSTAT: CMD_ERR");
|
|
dev_err(dev, " (%x)\n", val);
|
|
ltq_ebu_w32(SFSTAT_CMD_ERR,
|
|
SFSTAT);
|
|
return -EBADE;
|
|
}
|
|
} while (val & SFSTAT_CMD_PEND);
|
|
val = ltq_ebu_r32(SFDATA);
|
|
do {
|
|
*rxp = (val & 0xFF);
|
|
rxp++;
|
|
val >>= 8;
|
|
len--;
|
|
} while (len);
|
|
} while (bytelen);
|
|
state = state_end;
|
|
break;
|
|
}
|
|
case state_disable_cs:
|
|
{
|
|
priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
|
|
ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
|
|
SFCMD);
|
|
val = ltq_ebu_r32(SFSTAT);
|
|
if (val & SFSTAT_CMD_ERR) {
|
|
/* reset error status */
|
|
dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
|
|
ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
|
|
return -EBADE;
|
|
}
|
|
state = state_end;
|
|
break;
|
|
}
|
|
case state_end:
|
|
break;
|
|
}
|
|
} while (state != state_end);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int falcon_sflash_setup(struct spi_device *spi)
|
|
{
|
|
unsigned int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ebu_lock, flags);
|
|
|
|
if (spi->max_speed_hz >= CLOCK_100M) {
|
|
/* set EBU clock to 100 MHz */
|
|
ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
|
|
i = 1; /* divider */
|
|
} else {
|
|
/* set EBU clock to 50 MHz */
|
|
ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
|
|
|
|
/* search for suitable divider */
|
|
for (i = 1; i < 7; i++) {
|
|
if (CLOCK_50M / i <= spi->max_speed_hz)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* setup period of serial clock */
|
|
ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
|
|
| SFTIME_SCKR_POS_MASK
|
|
| SFTIME_SCK_PER_MASK,
|
|
(i << SFTIME_SCKR_POS_OFFSET)
|
|
| (i << (SFTIME_SCK_PER_OFFSET + 1)),
|
|
SFTIME);
|
|
|
|
/*
|
|
* set some bits of unused_wd, to not trigger HOLD/WP
|
|
* signals on non QUAD flashes
|
|
*/
|
|
ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
|
|
|
|
ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
|
|
BUSRCON0);
|
|
ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
|
|
/* set address wrap around to maximum for 24-bit addresses */
|
|
ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
|
|
|
|
spin_unlock_irqrestore(&ebu_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int falcon_sflash_xfer_one(struct spi_master *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct falcon_sflash *priv = spi_master_get_devdata(master);
|
|
struct spi_transfer *t;
|
|
unsigned long spi_flags;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
priv->sfcmd = 0;
|
|
m->actual_length = 0;
|
|
|
|
spi_flags = FALCON_SPI_XFER_BEGIN;
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (list_is_last(&t->transfer_list, &m->transfers))
|
|
spi_flags |= FALCON_SPI_XFER_END;
|
|
|
|
spin_lock_irqsave(&ebu_lock, flags);
|
|
ret = falcon_sflash_xfer(m->spi, t, spi_flags);
|
|
spin_unlock_irqrestore(&ebu_lock, flags);
|
|
|
|
if (ret)
|
|
break;
|
|
|
|
m->actual_length += t->len;
|
|
|
|
WARN_ON(t->delay_usecs || t->cs_change);
|
|
spi_flags = 0;
|
|
}
|
|
|
|
m->status = ret;
|
|
spi_finalize_current_message(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int falcon_sflash_probe(struct platform_device *pdev)
|
|
{
|
|
struct falcon_sflash *priv;
|
|
struct spi_master *master;
|
|
int ret;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*priv));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
priv = spi_master_get_devdata(master);
|
|
priv->master = master;
|
|
|
|
master->mode_bits = SPI_MODE_3;
|
|
master->flags = SPI_MASTER_HALF_DUPLEX;
|
|
master->setup = falcon_sflash_setup;
|
|
master->transfer_one_message = falcon_sflash_xfer_one;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (ret)
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id falcon_sflash_match[] = {
|
|
{ .compatible = "lantiq,sflash-falcon" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, falcon_sflash_match);
|
|
|
|
static struct platform_driver falcon_sflash_driver = {
|
|
.probe = falcon_sflash_probe,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = falcon_sflash_match,
|
|
}
|
|
};
|
|
|
|
module_platform_driver(falcon_sflash_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");
|