582 строки
20 KiB
ReStructuredText
582 строки
20 KiB
ReStructuredText
The Zoran driver
|
||
================
|
||
|
||
unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33)
|
||
|
||
website: http://mjpeg.sourceforge.net/driver-zoran/
|
||
|
||
|
||
Frequently Asked Questions
|
||
--------------------------
|
||
|
||
What cards are supported
|
||
------------------------
|
||
|
||
Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro
|
||
DC10/DC10+/DC30/DC30+ and related boards (available under various names).
|
||
|
||
Iomega Buz
|
||
~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Philips saa7111 TV decoder
|
||
* Philips saa7185 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, saa7111, saa7185, zr36060, zr36067
|
||
|
||
Inputs/outputs: Composite and S-video
|
||
|
||
Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
|
||
|
||
Card number: 7
|
||
|
||
AverMedia 6 Eyes AVS6EYES
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Samsung ks0127 TV decoder
|
||
* Conexant bt866 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, ks0127, bt866, zr36060, zr36067
|
||
|
||
Inputs/outputs:
|
||
Six physical inputs. 1-6 are composite,
|
||
1-2, 3-4, 5-6 doubles as S-video,
|
||
1-3 triples as component.
|
||
One composite output.
|
||
|
||
Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
|
||
|
||
Card number: 8
|
||
|
||
.. note::
|
||
|
||
Not autodetected, card=8 is necessary.
|
||
|
||
Linux Media Labs LML33
|
||
~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Brooktree bt819 TV decoder
|
||
* Brooktree bt856 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, bt819, bt856, zr36060, zr36067
|
||
|
||
Inputs/outputs: Composite and S-video
|
||
|
||
Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
|
||
|
||
Card number: 5
|
||
|
||
Linux Media Labs LML33R10
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Philips saa7114 TV decoder
|
||
* Analog Devices adv7170 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, saa7114, adv7170, zr36060, zr36067
|
||
|
||
Inputs/outputs: Composite and S-video
|
||
|
||
Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
|
||
|
||
Card number: 6
|
||
|
||
Pinnacle/Miro DC10(new)
|
||
~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36057 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Philips saa7110a TV decoder
|
||
* Analog Devices adv7176 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, saa7110, adv7175, zr36060, zr36067
|
||
|
||
Inputs/outputs: Composite, S-video and Internal
|
||
|
||
Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
|
||
|
||
Card number: 1
|
||
|
||
Pinnacle/Miro DC10+
|
||
~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36060 MJPEG codec
|
||
* Philips saa7110a TV decoder
|
||
* Analog Devices adv7176 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, sa7110, adv7175, zr36060, zr36067
|
||
|
||
Inputs/outputs: Composite, S-video and Internal
|
||
|
||
Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
|
||
|
||
Card number: 2
|
||
|
||
Pinnacle/Miro DC10(old)
|
||
~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36057 PCI controller
|
||
* Zoran zr36050 MJPEG codec
|
||
* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?)
|
||
* Micronas vpx3220a TV decoder
|
||
* mse3000 TV encoder or Analog Devices adv7176 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067
|
||
|
||
Inputs/outputs: Composite, S-video and Internal
|
||
|
||
Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
|
||
|
||
Card number: 0
|
||
|
||
Pinnacle/Miro DC30
|
||
~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36057 PCI controller
|
||
* Zoran zr36050 MJPEG codec
|
||
* Zoran zr36016 Video Front End
|
||
* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
|
||
* Analog Devices adv7176 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067
|
||
|
||
Inputs/outputs: Composite, S-video and Internal
|
||
|
||
Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
|
||
|
||
Card number: 3
|
||
|
||
Pinnacle/Miro DC30+
|
||
~~~~~~~~~~~~~~~~~~~
|
||
|
||
* Zoran zr36067 PCI controller
|
||
* Zoran zr36050 MJPEG codec
|
||
* Zoran zr36016 Video Front End
|
||
* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
|
||
* Analog Devices adv7176 TV encoder
|
||
|
||
Drivers to use: videodev, i2c-core, i2c-algo-bit,
|
||
videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067
|
||
|
||
Inputs/outputs: Composite, S-video and Internal
|
||
|
||
Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
|
||
|
||
Card number: 4
|
||
|
||
.. note::
|
||
|
||
#) No module for the mse3000 is available yet
|
||
#) No module for the vpx3224 is available yet
|
||
|
||
1.1 What the TV decoder can do an what not
|
||
------------------------------------------
|
||
|
||
The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that
|
||
information is not enough. There are several formats of the TV standards.
|
||
And not every TV decoder is able to handle every format. Also the every
|
||
combination is supported by the driver. There are currently 11 different
|
||
tv broadcast formats all aver the world.
|
||
|
||
The CCIR defines parameters needed for broadcasting the signal.
|
||
The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
|
||
The CCIR says not much about the colorsystem used !!!
|
||
And talking about a colorsystem says not to much about how it is broadcast.
|
||
|
||
The CCIR standards A,E,F are not used any more.
|
||
|
||
When you speak about NTSC, you usually mean the standard: CCIR - M using
|
||
the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada
|
||
and a few others.
|
||
|
||
When you talk about PAL, you usually mean: CCIR - B/G using the PAL
|
||
colorsystem which is used in many Countries.
|
||
|
||
When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem
|
||
which is used in France, and a few others.
|
||
|
||
There the other version of SECAM, CCIR - D/K is used in Bulgaria, China,
|
||
Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others.
|
||
|
||
The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in
|
||
Egypt, Libya, Sri Lanka, Syrain Arab. Rep.
|
||
|
||
The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong,
|
||
Ireland, Nigeria, South Africa.
|
||
|
||
The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate,
|
||
and is used in Argentinia, Uruguay, an a few others
|
||
|
||
We do not talk about how the audio is broadcast !
|
||
|
||
A rather good sites about the TV standards are:
|
||
http://www.sony.jp/support/
|
||
http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
|
||
and http://www.cabl.com/restaurant/channel.html
|
||
|
||
Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly
|
||
used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same
|
||
as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would
|
||
be the same as NTSC 4.43.
|
||
NTSC Combs seems to be a decoder mode where the decoder uses a comb filter
|
||
to split coma and luma instead of a Delay line.
|
||
|
||
But I did not defiantly find out what NTSC Comb is.
|
||
|
||
Philips saa7111 TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1997, is used in the BUZ and
|
||
- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM
|
||
|
||
Philips saa7110a TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and
|
||
- can handle: PAL B/G, NTSC M and SECAM
|
||
|
||
Philips saa7114 TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 2000, is used in the LML33R10 and
|
||
- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM
|
||
|
||
Brooktree bt819 TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1996, and is used in the LML33 and
|
||
- can handle: PAL B/D/G/H/I, NTSC M
|
||
|
||
Micronas vpx3220a TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1996, is used in the DC30 and DC30+ and
|
||
- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb
|
||
|
||
Samsung ks0127 TV decoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- is used in the AVS6EYES card and
|
||
- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM
|
||
|
||
|
||
What the TV encoder can do an what not
|
||
--------------------------------------
|
||
|
||
The TV encoder are doing the "same" as the decoder, but in the oder direction.
|
||
You feed them digital data and the generate a Composite or SVHS signal.
|
||
For information about the colorsystems and TV norm take a look in the
|
||
TV decoder section.
|
||
|
||
Philips saa7185 TV Encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1996, is used in the BUZ
|
||
- can generate: PAL B/G, NTSC M
|
||
|
||
Brooktree bt856 TV Encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1994, is used in the LML33
|
||
- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina)
|
||
|
||
Analog Devices adv7170 TV Encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 2000, is used in the LML300R10
|
||
- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60
|
||
|
||
Analog Devices adv7175 TV Encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+
|
||
- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M
|
||
|
||
ITT mse3000 TV encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- was introduced in 1991, is used in the DC10 old
|
||
- can generate: PAL , NTSC , SECAM
|
||
|
||
Conexant bt866 TV encoder
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
- is used in AVS6EYES, and
|
||
- can generate: NTSC/PAL, PALM, PALN
|
||
|
||
The adv717x, should be able to produce PAL N. But you find nothing PAL N
|
||
specific in the registers. Seem that you have to reuse a other standard
|
||
to generate PAL N, maybe it would work if you use the PAL M settings.
|
||
|
||
How do I get this damn thing to work
|
||
------------------------------------
|
||
|
||
Load zr36067.o. If it can't autodetect your card, use the card=X insmod
|
||
option with X being the card number as given in the previous section.
|
||
To have more than one card, use card=X1[,X2[,X3,[X4[..]]]]
|
||
|
||
To automate this, add the following to your /etc/modprobe.d/zoran.conf:
|
||
|
||
options zr36067 card=X1[,X2[,X3[,X4[..]]]]
|
||
alias char-major-81-0 zr36067
|
||
|
||
One thing to keep in mind is that this doesn't load zr36067.o itself yet. It
|
||
just automates loading. If you start using xawtv, the device won't load on
|
||
some systems, since you're trying to load modules as a user, which is not
|
||
allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to
|
||
XF86Config-4 when you use X by default, or to run 'v4l-conf -c <device>' in
|
||
one of your startup scripts (normally rc.local) if you don't use X. Both
|
||
make sure that the modules are loaded on startup, under the root account.
|
||
|
||
What mainboard should I use (or why doesn't my card work)
|
||
---------------------------------------------------------
|
||
|
||
|
||
<insert lousy disclaimer here>. In short: good=SiS/Intel, bad=VIA.
|
||
|
||
Experience tells us that people with a Buz, on average, have more problems
|
||
than users with a DC10+/LML33. Also, it tells us that people owning a VIA-
|
||
based mainboard (ktXXX, MVP3) have more problems than users with a mainboard
|
||
based on a different chipset. Here's some notes from Andrew Stevens:
|
||
|
||
Here's my experience of using LML33 and Buz on various motherboards:
|
||
|
||
- VIA MVP3
|
||
- Forget it. Pointless. Doesn't work.
|
||
- Intel 430FX (Pentium 200)
|
||
- LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie)
|
||
- Intel 440BX (early stepping)
|
||
- LML33 tolerable. Buz starting to get annoying (6-10 frames/hour)
|
||
- Intel 440BX (late stepping)
|
||
- Buz tolerable, LML3 almost perfect (occasional single frame drops)
|
||
- SiS735
|
||
- LML33 perfect, Buz tolerable.
|
||
- VIA KT133(*)
|
||
- LML33 starting to get annoying, Buz poor enough that I have up.
|
||
|
||
- Both 440BX boards were dual CPU versions.
|
||
|
||
Bernhard Praschinger later added:
|
||
|
||
- AMD 751
|
||
- Buz perfect-tolerable
|
||
- AMD 760
|
||
- Buz perfect-tolerable
|
||
|
||
In general, people on the user mailinglist won't give you much of a chance
|
||
if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd
|
||
rather want to spend some more money on better boards. In general, VIA
|
||
mainboard's IDE/PCI performance will also suck badly compared to others.
|
||
You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview.
|
||
Basically, you can assume that if the Buz works, the LML33 will work too. If
|
||
the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to
|
||
different mainboard chipsets from all of the supported cards.
|
||
|
||
If you experience timeouts during capture, buy a better mainboard or lower
|
||
the quality/buffersize during capture (see 'Concerning buffer sizes, quality,
|
||
output size etc.'). If it hangs, there's little we can do as of now. Check
|
||
your IRQs and make sure the card has its own interrupts.
|
||
|
||
Programming interface
|
||
---------------------
|
||
|
||
This driver conforms to video4linux2. Support for V4L1 and for the custom
|
||
zoran ioctls has been removed in kernel 2.6.38.
|
||
|
||
For programming example, please, look at lavrec.c and lavplay.c code in
|
||
the MJPEG-tools (http://mjpeg.sf.net/).
|
||
|
||
Additional notes for software developers:
|
||
|
||
The driver returns maxwidth and maxheight parameters according to
|
||
the current TV standard (norm). Therefore, the software which
|
||
communicates with the driver and "asks" for these parameters should
|
||
first set the correct norm. Well, it seems logically correct: TV
|
||
standard is "more constant" for current country than geometry
|
||
settings of a variety of TV capture cards which may work in ITU or
|
||
square pixel format.
|
||
|
||
Applications
|
||
------------
|
||
|
||
Applications known to work with this driver:
|
||
|
||
TV viewing:
|
||
|
||
* xawtv
|
||
* kwintv
|
||
* probably any TV application that supports video4linux or video4linux2.
|
||
|
||
MJPEG capture/playback:
|
||
|
||
* mjpegtools/lavtools (or Linux Video Studio)
|
||
* gstreamer
|
||
* mplayer
|
||
|
||
General raw capture:
|
||
|
||
* xawtv
|
||
* gstreamer
|
||
* probably any application that supports video4linux or video4linux2
|
||
|
||
Video editing:
|
||
|
||
* Cinelerra
|
||
* MainActor
|
||
* mjpegtools (or Linux Video Studio)
|
||
|
||
|
||
Concerning buffer sizes, quality, output size etc.
|
||
--------------------------------------------------
|
||
|
||
|
||
The zr36060 can do 1:2 JPEG compression. This is really the theoretical
|
||
maximum that the chipset can reach. The driver can, however, limit compression
|
||
to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz)
|
||
can't handle 1:2 compression without stopping capture after only a few minutes.
|
||
With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into
|
||
1:4 max. compression mode.
|
||
|
||
100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame
|
||
(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the
|
||
fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 =
|
||
414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT
|
||
(quantization) tables, and you'll get to something like 512kB per frame for
|
||
1:2 compression. For 1:4 compression, you'd have frames of half this size.
|
||
|
||
Some additional explanation by Martin Samuelsson, which also explains the
|
||
importance of buffer sizes:
|
||
--
|
||
> Hmm, I do not think it is really that way. With the current (downloaded
|
||
> at 18:00 Monday) driver I get that output sizes for 10 sec:
|
||
> -q 50 -b 128 : 24.283.332 Bytes
|
||
> -q 50 -b 256 : 48.442.368
|
||
> -q 25 -b 128 : 24.655.992
|
||
> -q 25 -b 256 : 25.859.820
|
||
|
||
I woke up, and can't go to sleep again. I'll kill some time explaining why
|
||
this doesn't look strange to me.
|
||
|
||
Let's do some math using a width of 704 pixels. I'm not sure whether the Buz
|
||
actually use that number or not, but that's not too important right now.
|
||
|
||
704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block;
|
||
3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block;
|
||
1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum
|
||
output becomes 512 bits per block. Actually 510, but 512 is simpler to use
|
||
for calculations.
|
||
|
||
Let's say that we specify d1q50. We thus want 256 bits per block; times 3168
|
||
becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes
|
||
here, so we don't need to do any fancy corrections for bits-per-pixel or such
|
||
things. 101376 bytes per field.
|
||
|
||
d1 video contains two fields per frame. Those sum up to 202752 bytes per
|
||
frame, and one of those frames goes into each buffer.
|
||
|
||
But wait a second! -b128 gives 128kB buffers! It's not possible to cram
|
||
202752 bytes of JPEG data into 128kB!
|
||
|
||
This is what the driver notice and automatically compensate for in your
|
||
examples. Let's do some math using this information:
|
||
|
||
128kB is 131072 bytes. In this buffer, we want to store two fields, which
|
||
leaves 65536 bytes for each field. Using 3168 blocks per field, we get
|
||
20.68686868... available bytes per block; 165 bits. We can't allow the
|
||
request for 256 bits per block when there's only 165 bits available! The -q50
|
||
option is silently overridden, and the -b128 option takes precedence, leaving
|
||
us with the equivalence of -q32.
|
||
|
||
This gives us a data rate of 165 bits per block, which, times 3168, sums up
|
||
to 65340 bytes per field, out of the allowed 65536. The current driver has
|
||
another level of rate limiting; it won't accept -q values that fill more than
|
||
6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be
|
||
a safe bet. Personally, I think I would have lowered requested-bits-per-block
|
||
by one, or something like that.) We can't use 165 bits per block, but have to
|
||
lower it again, to 6/8 of the available buffer space: We end up with 124 bits
|
||
per block, the equivalence of -q24. With 128kB buffers, you can't use greater
|
||
than -q24 at -d1. (And PAL, and 704 pixels width...)
|
||
|
||
The third example is limited to -q24 through the same process. The second
|
||
example, using very similar calculations, is limited to -q48. The only
|
||
example that actually grab at the specified -q value is the last one, which
|
||
is clearly visible, looking at the file size.
|
||
--
|
||
|
||
Conclusion: the quality of the resulting movie depends on buffer size, quality,
|
||
whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c
|
||
module to do 1:4 instead of 1:2 compression, etc.
|
||
|
||
If you experience timeouts, lowering the quality/buffersize or using
|
||
'low_bitrate=1 as insmod option for zr36060.o might actually help, as is
|
||
proven by the Buz.
|
||
|
||
It hangs/crashes/fails/whatevers! Help!
|
||
---------------------------------------
|
||
|
||
Make sure that the card has its own interrupts (see /proc/interrupts), check
|
||
the output of dmesg at high verbosity (load zr36067.o with debug=2,
|
||
load all other modules with debug=1). Check that your mainboard is favorable
|
||
(see question 2) and if not, test the card in another computer. Also see the
|
||
notes given in question 3 and try lowering quality/buffersize/capturesize
|
||
if recording fails after a period of time.
|
||
|
||
If all this doesn't help, give a clear description of the problem including
|
||
detailed hardware information (memory+brand, mainboard+chipset+brand, which
|
||
MJPEG card, processor, other PCI cards that might be of interest), give the
|
||
system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give
|
||
the kernel version, driver version, glibc version, gcc version and any other
|
||
information that might possibly be of interest. Also provide the dmesg output
|
||
at high verbosity. See 'Contacting' on how to contact the developers.
|
||
|
||
Maintainers/Contacting
|
||
----------------------
|
||
|
||
The driver is currently maintained by Laurent Pinchart and Ronald Bultje
|
||
(<laurent.pinchart@skynet.be> and <rbultje@ronald.bitfreak.net>). For bug
|
||
reports or questions, please contact the mailinglist instead of the developers
|
||
individually. For user questions (i.e. bug reports or how-to questions), send
|
||
an email to <mjpeg-users@lists.sf.net>, for developers (i.e. if you want to
|
||
help programming), send an email to <mjpeg-developer@lists.sf.net>. See
|
||
http://www.sf.net/projects/mjpeg/ for subscription information.
|
||
|
||
For bug reports, be sure to include all the information as described in
|
||
the section 'It hangs/crashes/fails/whatevers! Help!'. Please make sure
|
||
you're using the latest version (http://mjpeg.sf.net/driver-zoran/).
|
||
|
||
Previous maintainers/developers of this driver include Serguei Miridonov
|
||
<mirsev@cicese.mx>, Wolfgang Scherr <scherr@net4you.net>, Dave Perks
|
||
<dperks@ibm.net> and Rainer Johanni <Rainer@Johanni.de>.
|
||
|
||
Driver's License
|
||
----------------
|
||
|
||
This driver is distributed under the terms of the General Public License.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 2 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
See http://www.gnu.org/ for more information.
|