WSL2-Linux-Kernel/drivers/usb
Sekhar Nori 0db56e4335 usb: gadget: f_uac2: calculate wMaxPacketSize before endpoint match
Calculate wMaxPacketSize before endpoint matching the
descriptor is found.

This allows audio gadget to be used with controllers
which have a shortage or unavailability of endpoints
that can handle max packet size of 1023 (FS) or 1024
(HS).

With this audio gadget can be used on TI's OMAP-L138 SoC
which has a MUSB HS controller with endpoints having max
packet size much less than 1023 or 1024. See mode_2_cfg in
drivers/usb/musb/musb_core.c

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-05-17 14:13:05 +03:00
..
atm usb: atm: remove unnecessary code 2017-03-16 17:58:44 +09:00
c67x00
chipidea Two changes for this v4.12-rc1: 2017-04-18 16:52:20 +02:00
class USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" 2017-04-25 20:04:28 +02:00
common DeviceTree for 4.12: 2017-05-05 19:33:07 -07:00
core USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
dwc2 usb: changes for v4.12 2017-04-11 16:47:26 +02:00
dwc3 usb: dwc3: gadget: lazily map requests for DMA 2017-05-17 13:21:14 +03:00
early usb/early: Add driver for xhci debug capability 2017-03-21 12:30:05 +01:00
gadget usb: gadget: f_uac2: calculate wMaxPacketSize before endpoint match 2017-05-17 14:13:05 +03:00
host usb: host: xhci: remove #ifdef around PM functions 2017-04-26 22:55:19 +02:00
image sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
isp1760 usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW 2017-03-17 13:16:56 +09:00
misc usb: misc: legousbtower: Fix buffers on stack 2017-04-26 11:28:45 +02:00
mon sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mtu3 usb: mtu3: Replace the extcon API 2017-04-11 10:58:21 +03:00
musb usb: musb: don't mark of_dev_auxdata as initdata 2017-04-26 11:30:02 +02:00
phy usb: changes for v4.12 2017-04-11 16:47:26 +02:00
renesas_usbhs usb: renesas_usbhs: Replace the deprecated extcon API 2017-01-24 11:04:14 +02:00
serial USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
storage USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h 2017-04-25 20:01:23 +02:00
typec usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY 2017-03-23 13:48:44 +01:00
usbip usb: usbip: Remove unnecessary get_vdev() 2017-04-08 12:04:42 +02:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-14 17:07:30 +08:00
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.