2382 строки
66 KiB
C
2382 строки
66 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* s2255drv.c - a driver for the Sensoray 2255 USB video capture device
|
|
*
|
|
* Copyright (C) 2007-2014 by Sensoray Company Inc.
|
|
* Dean Anderson
|
|
*
|
|
* Some video buffer code based on vivi driver:
|
|
*
|
|
* Sensoray 2255 device supports 4 simultaneous channels.
|
|
* The channels are not "crossbar" inputs, they are physically
|
|
* attached to separate video decoders.
|
|
*
|
|
* Because of USB2.0 bandwidth limitations. There is only a
|
|
* certain amount of data which may be transferred at one time.
|
|
*
|
|
* Example maximum bandwidth utilization:
|
|
*
|
|
* -full size, color mode YUYV or YUV422P: 2 channels at once
|
|
* -full or half size Grey scale: all 4 channels at once
|
|
* -half size, color mode YUYV or YUV422P: all 4 channels at once
|
|
* -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels
|
|
* at once.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/usb.h>
|
|
#include <media/videobuf2-v4l2.h>
|
|
#include <media/videobuf2-vmalloc.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-event.h>
|
|
|
|
#define S2255_VERSION "1.25.1"
|
|
#define FIRMWARE_FILE_NAME "f2255usb.bin"
|
|
|
|
/* default JPEG quality */
|
|
#define S2255_DEF_JPEG_QUAL 50
|
|
/* vendor request in */
|
|
#define S2255_VR_IN 0
|
|
/* vendor request out */
|
|
#define S2255_VR_OUT 1
|
|
/* firmware query */
|
|
#define S2255_VR_FW 0x30
|
|
/* USB endpoint number for configuring the device */
|
|
#define S2255_CONFIG_EP 2
|
|
/* maximum time for DSP to start responding after last FW word loaded(ms) */
|
|
#define S2255_DSP_BOOTTIME 800
|
|
/* maximum time to wait for firmware to load (ms) */
|
|
#define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME)
|
|
#define S2255_MIN_BUFS 2
|
|
#define S2255_SETMODE_TIMEOUT 500
|
|
#define S2255_VIDSTATUS_TIMEOUT 350
|
|
#define S2255_MARKER_FRAME cpu_to_le32(0x2255DA4AL)
|
|
#define S2255_MARKER_RESPONSE cpu_to_le32(0x2255ACACL)
|
|
#define S2255_RESPONSE_SETMODE cpu_to_le32(0x01)
|
|
#define S2255_RESPONSE_FW cpu_to_le32(0x10)
|
|
#define S2255_RESPONSE_STATUS cpu_to_le32(0x20)
|
|
#define S2255_USB_XFER_SIZE (16 * 1024)
|
|
#define MAX_CHANNELS 4
|
|
#define SYS_FRAMES 4
|
|
/* maximum size is PAL full size plus room for the marker header(s) */
|
|
#define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096)
|
|
#define DEF_USB_BLOCK S2255_USB_XFER_SIZE
|
|
#define LINE_SZ_4CIFS_NTSC 640
|
|
#define LINE_SZ_2CIFS_NTSC 640
|
|
#define LINE_SZ_1CIFS_NTSC 320
|
|
#define LINE_SZ_4CIFS_PAL 704
|
|
#define LINE_SZ_2CIFS_PAL 704
|
|
#define LINE_SZ_1CIFS_PAL 352
|
|
#define NUM_LINES_4CIFS_NTSC 240
|
|
#define NUM_LINES_2CIFS_NTSC 240
|
|
#define NUM_LINES_1CIFS_NTSC 240
|
|
#define NUM_LINES_4CIFS_PAL 288
|
|
#define NUM_LINES_2CIFS_PAL 288
|
|
#define NUM_LINES_1CIFS_PAL 288
|
|
#define LINE_SZ_DEF 640
|
|
#define NUM_LINES_DEF 240
|
|
|
|
|
|
/* predefined settings */
|
|
#define FORMAT_NTSC 1
|
|
#define FORMAT_PAL 2
|
|
|
|
#define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */
|
|
#define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */
|
|
#define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */
|
|
/* SCALE_4CIFSI is the 2 fields interpolated into one */
|
|
#define SCALE_4CIFSI 4 /* 640x480(NTSC) or 704x576(PAL) high quality */
|
|
|
|
#define COLOR_YUVPL 1 /* YUV planar */
|
|
#define COLOR_YUVPK 2 /* YUV packed */
|
|
#define COLOR_Y8 4 /* monochrome */
|
|
#define COLOR_JPG 5 /* JPEG */
|
|
|
|
#define MASK_COLOR 0x000000ff
|
|
#define MASK_JPG_QUALITY 0x0000ff00
|
|
#define MASK_INPUT_TYPE 0x000f0000
|
|
/* frame decimation. */
|
|
#define FDEC_1 1 /* capture every frame. default */
|
|
#define FDEC_2 2 /* capture every 2nd frame */
|
|
#define FDEC_3 3 /* capture every 3rd frame */
|
|
#define FDEC_5 5 /* capture every 5th frame */
|
|
|
|
/*-------------------------------------------------------
|
|
* Default mode parameters.
|
|
*-------------------------------------------------------*/
|
|
#define DEF_SCALE SCALE_4CIFS
|
|
#define DEF_COLOR COLOR_YUVPL
|
|
#define DEF_FDEC FDEC_1
|
|
#define DEF_BRIGHT 0
|
|
#define DEF_CONTRAST 0x5c
|
|
#define DEF_SATURATION 0x80
|
|
#define DEF_HUE 0
|
|
|
|
/* usb config commands */
|
|
#define IN_DATA_TOKEN cpu_to_le32(0x2255c0de)
|
|
#define CMD_2255 0xc2255000
|
|
#define CMD_SET_MODE cpu_to_le32((CMD_2255 | 0x10))
|
|
#define CMD_START cpu_to_le32((CMD_2255 | 0x20))
|
|
#define CMD_STOP cpu_to_le32((CMD_2255 | 0x30))
|
|
#define CMD_STATUS cpu_to_le32((CMD_2255 | 0x40))
|
|
|
|
struct s2255_mode {
|
|
u32 format; /* input video format (NTSC, PAL) */
|
|
u32 scale; /* output video scale */
|
|
u32 color; /* output video color format */
|
|
u32 fdec; /* frame decimation */
|
|
u32 bright; /* brightness */
|
|
u32 contrast; /* contrast */
|
|
u32 saturation; /* saturation */
|
|
u32 hue; /* hue (NTSC only)*/
|
|
u32 single; /* capture 1 frame at a time (!=0), continuously (==0)*/
|
|
u32 usb_block; /* block size. should be 4096 of DEF_USB_BLOCK */
|
|
u32 restart; /* if DSP requires restart */
|
|
};
|
|
|
|
|
|
#define S2255_READ_IDLE 0
|
|
#define S2255_READ_FRAME 1
|
|
|
|
/* frame structure */
|
|
struct s2255_framei {
|
|
unsigned long size;
|
|
unsigned long ulState; /* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/
|
|
void *lpvbits; /* image data */
|
|
unsigned long cur_size; /* current data copied to it */
|
|
};
|
|
|
|
/* image buffer structure */
|
|
struct s2255_bufferi {
|
|
unsigned long dwFrames; /* number of frames in buffer */
|
|
struct s2255_framei frame[SYS_FRAMES]; /* array of FRAME structures */
|
|
};
|
|
|
|
#define DEF_MODEI_NTSC_CONT {FORMAT_NTSC, DEF_SCALE, DEF_COLOR, \
|
|
DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \
|
|
DEF_HUE, 0, DEF_USB_BLOCK, 0}
|
|
|
|
/* for firmware loading, fw_state */
|
|
#define S2255_FW_NOTLOADED 0
|
|
#define S2255_FW_LOADED_DSPWAIT 1
|
|
#define S2255_FW_SUCCESS 2
|
|
#define S2255_FW_FAILED 3
|
|
#define S2255_FW_DISCONNECTING 4
|
|
#define S2255_FW_MARKER cpu_to_le32(0x22552f2f)
|
|
/* 2255 read states */
|
|
#define S2255_READ_IDLE 0
|
|
#define S2255_READ_FRAME 1
|
|
struct s2255_fw {
|
|
int fw_loaded;
|
|
int fw_size;
|
|
struct urb *fw_urb;
|
|
atomic_t fw_state;
|
|
void *pfw_data;
|
|
wait_queue_head_t wait_fw;
|
|
const struct firmware *fw;
|
|
};
|
|
|
|
struct s2255_pipeinfo {
|
|
u32 max_transfer_size;
|
|
u32 cur_transfer_size;
|
|
u8 *transfer_buffer;
|
|
u32 state;
|
|
void *stream_urb;
|
|
void *dev; /* back pointer to s2255_dev struct*/
|
|
u32 err_count;
|
|
u32 idx;
|
|
};
|
|
|
|
struct s2255_fmt; /*forward declaration */
|
|
struct s2255_dev;
|
|
|
|
/* 2255 video channel */
|
|
struct s2255_vc {
|
|
struct s2255_dev *dev;
|
|
struct video_device vdev;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct v4l2_ctrl *jpegqual_ctrl;
|
|
int resources;
|
|
struct list_head buf_list;
|
|
struct s2255_bufferi buffer;
|
|
struct s2255_mode mode;
|
|
v4l2_std_id std;
|
|
/* jpeg compression */
|
|
unsigned jpegqual;
|
|
/* capture parameters (for high quality mode full size) */
|
|
struct v4l2_captureparm cap_parm;
|
|
int cur_frame;
|
|
int last_frame;
|
|
/* allocated image size */
|
|
unsigned long req_image_size;
|
|
/* received packet size */
|
|
unsigned long pkt_size;
|
|
int bad_payload;
|
|
unsigned long frame_count;
|
|
/* if JPEG image */
|
|
int jpg_size;
|
|
/* if channel configured to default state */
|
|
int configured;
|
|
wait_queue_head_t wait_setmode;
|
|
int setmode_ready;
|
|
/* video status items */
|
|
int vidstatus;
|
|
wait_queue_head_t wait_vidstatus;
|
|
int vidstatus_ready;
|
|
unsigned int width;
|
|
unsigned int height;
|
|
enum v4l2_field field;
|
|
const struct s2255_fmt *fmt;
|
|
int idx; /* channel number on device, 0-3 */
|
|
struct vb2_queue vb_vidq;
|
|
struct mutex vb_lock; /* streaming lock */
|
|
spinlock_t qlock;
|
|
};
|
|
|
|
|
|
struct s2255_dev {
|
|
struct s2255_vc vc[MAX_CHANNELS];
|
|
struct v4l2_device v4l2_dev;
|
|
atomic_t num_channels;
|
|
int frames;
|
|
struct mutex lock; /* channels[].vdev.lock */
|
|
struct mutex cmdlock; /* protects cmdbuf */
|
|
struct usb_device *udev;
|
|
struct usb_interface *interface;
|
|
u8 read_endpoint;
|
|
struct timer_list timer;
|
|
struct s2255_fw *fw_data;
|
|
struct s2255_pipeinfo pipe;
|
|
u32 cc; /* current channel */
|
|
int frame_ready;
|
|
int chn_ready;
|
|
/* dsp firmware version (f2255usb.bin) */
|
|
int dsp_fw_ver;
|
|
u16 pid; /* product id */
|
|
#define S2255_CMDBUF_SIZE 512
|
|
__le32 *cmdbuf;
|
|
};
|
|
|
|
static inline struct s2255_dev *to_s2255_dev(struct v4l2_device *v4l2_dev)
|
|
{
|
|
return container_of(v4l2_dev, struct s2255_dev, v4l2_dev);
|
|
}
|
|
|
|
struct s2255_fmt {
|
|
u32 fourcc;
|
|
int depth;
|
|
};
|
|
|
|
/* buffer for one video frame */
|
|
struct s2255_buffer {
|
|
/* common v4l buffer stuff -- must be first */
|
|
struct vb2_v4l2_buffer vb;
|
|
struct list_head list;
|
|
};
|
|
|
|
|
|
/* current cypress EEPROM firmware version */
|
|
#define S2255_CUR_USB_FWVER ((3 << 8) | 12)
|
|
/* current DSP FW version */
|
|
#define S2255_CUR_DSP_FWVER 10104
|
|
/* Need DSP version 5+ for video status feature */
|
|
#define S2255_MIN_DSP_STATUS 5
|
|
#define S2255_MIN_DSP_COLORFILTER 8
|
|
#define S2255_NORMS (V4L2_STD_ALL)
|
|
|
|
/* private V4L2 controls */
|
|
|
|
/*
|
|
* The following chart displays how COLORFILTER should be set
|
|
* =========================================================
|
|
* = fourcc = COLORFILTER =
|
|
* = ===============================
|
|
* = = 0 = 1 =
|
|
* =========================================================
|
|
* = V4L2_PIX_FMT_GREY(Y8) = monochrome from = monochrome=
|
|
* = = s-video or = composite =
|
|
* = = B/W camera = input =
|
|
* =========================================================
|
|
* = other = color, svideo = color, =
|
|
* = = = composite =
|
|
* =========================================================
|
|
*
|
|
* Notes:
|
|
* channels 0-3 on 2255 are composite
|
|
* channels 0-1 on 2257 are composite, 2-3 are s-video
|
|
* If COLORFILTER is 0 with a composite color camera connected,
|
|
* the output will appear monochrome but hatching
|
|
* will occur.
|
|
* COLORFILTER is different from "color killer" and "color effects"
|
|
* for reasons above.
|
|
*/
|
|
#define S2255_V4L2_YC_ON 1
|
|
#define S2255_V4L2_YC_OFF 0
|
|
#define V4L2_CID_S2255_COLORFILTER (V4L2_CID_USER_S2255_BASE + 0)
|
|
|
|
/* frame prefix size (sent once every frame) */
|
|
#define PREFIX_SIZE 512
|
|
|
|
/* Channels on box are in reverse order */
|
|
static unsigned long G_chnmap[MAX_CHANNELS] = {3, 2, 1, 0};
|
|
|
|
static int debug;
|
|
|
|
static int s2255_start_readpipe(struct s2255_dev *dev);
|
|
static void s2255_stop_readpipe(struct s2255_dev *dev);
|
|
static int s2255_start_acquire(struct s2255_vc *vc);
|
|
static int s2255_stop_acquire(struct s2255_vc *vc);
|
|
static void s2255_fillbuff(struct s2255_vc *vc, struct s2255_buffer *buf,
|
|
int jpgsize);
|
|
static int s2255_set_mode(struct s2255_vc *vc, struct s2255_mode *mode);
|
|
static int s2255_board_shutdown(struct s2255_dev *dev);
|
|
static void s2255_fwload_start(struct s2255_dev *dev);
|
|
static void s2255_destroy(struct s2255_dev *dev);
|
|
static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req,
|
|
u16 index, u16 value, void *buf,
|
|
s32 buf_len, int bOut);
|
|
|
|
/* dev_err macro with driver name */
|
|
#define S2255_DRIVER_NAME "s2255"
|
|
#define s2255_dev_err(dev, fmt, arg...) \
|
|
dev_err(dev, S2255_DRIVER_NAME " - " fmt, ##arg)
|
|
|
|
#define dprintk(dev, level, fmt, arg...) \
|
|
v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ## arg)
|
|
|
|
static struct usb_driver s2255_driver;
|
|
|
|
/* start video number */
|
|
static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
|
|
|
|
/* Enable jpeg capture. */
|
|
static int jpeg_enable = 1;
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Debug level(0-100) default 0");
|
|
module_param(video_nr, int, 0644);
|
|
MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)");
|
|
module_param(jpeg_enable, int, 0644);
|
|
MODULE_PARM_DESC(jpeg_enable, "Jpeg enable(1-on 0-off) default 1");
|
|
|
|
/* USB device table */
|
|
#define USB_SENSORAY_VID 0x1943
|
|
static const struct usb_device_id s2255_table[] = {
|
|
{USB_DEVICE(USB_SENSORAY_VID, 0x2255)},
|
|
{USB_DEVICE(USB_SENSORAY_VID, 0x2257)}, /*same family as 2255*/
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, s2255_table);
|
|
|
|
#define BUFFER_TIMEOUT msecs_to_jiffies(400)
|
|
|
|
/* image formats. */
|
|
/* JPEG formats must be defined last to support jpeg_enable parameter */
|
|
static const struct s2255_fmt formats[] = {
|
|
{
|
|
.fourcc = V4L2_PIX_FMT_YUYV,
|
|
.depth = 16
|
|
|
|
}, {
|
|
.fourcc = V4L2_PIX_FMT_UYVY,
|
|
.depth = 16
|
|
}, {
|
|
.fourcc = V4L2_PIX_FMT_YUV422P,
|
|
.depth = 16
|
|
|
|
}, {
|
|
.fourcc = V4L2_PIX_FMT_GREY,
|
|
.depth = 8
|
|
}, {
|
|
.fourcc = V4L2_PIX_FMT_JPEG,
|
|
.depth = 24
|
|
}, {
|
|
.fourcc = V4L2_PIX_FMT_MJPEG,
|
|
.depth = 24
|
|
}
|
|
};
|
|
|
|
static int norm_maxw(struct s2255_vc *vc)
|
|
{
|
|
return (vc->std & V4L2_STD_525_60) ?
|
|
LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL;
|
|
}
|
|
|
|
static int norm_maxh(struct s2255_vc *vc)
|
|
{
|
|
return (vc->std & V4L2_STD_525_60) ?
|
|
(NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2);
|
|
}
|
|
|
|
static int norm_minw(struct s2255_vc *vc)
|
|
{
|
|
return (vc->std & V4L2_STD_525_60) ?
|
|
LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL;
|
|
}
|
|
|
|
static int norm_minh(struct s2255_vc *vc)
|
|
{
|
|
return (vc->std & V4L2_STD_525_60) ?
|
|
(NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL);
|
|
}
|
|
|
|
|
|
/*
|
|
* TODO: fixme: move YUV reordering to hardware
|
|
* converts 2255 planar format to yuyv or uyvy
|
|
*/
|
|
static void planar422p_to_yuv_packed(const unsigned char *in,
|
|
unsigned char *out,
|
|
int width, int height,
|
|
int fmt)
|
|
{
|
|
unsigned char *pY;
|
|
unsigned char *pCb;
|
|
unsigned char *pCr;
|
|
unsigned long size = height * width;
|
|
unsigned int i;
|
|
pY = (unsigned char *)in;
|
|
pCr = (unsigned char *)in + height * width;
|
|
pCb = (unsigned char *)in + height * width + (height * width / 2);
|
|
for (i = 0; i < size * 2; i += 4) {
|
|
out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++;
|
|
out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++;
|
|
out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++;
|
|
out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void s2255_reset_dsppower(struct s2255_dev *dev)
|
|
{
|
|
s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1);
|
|
msleep(50);
|
|
s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
|
|
msleep(600);
|
|
s2255_vendor_req(dev, 0x10, 0x0000, 0x0000, NULL, 0, 1);
|
|
return;
|
|
}
|
|
|
|
/* kickstarts the firmware loading. from probe
|
|
*/
|
|
static void s2255_timer(struct timer_list *t)
|
|
{
|
|
struct s2255_dev *dev = from_timer(dev, t, timer);
|
|
struct s2255_fw *data = dev->fw_data;
|
|
if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
|
|
pr_err("s2255: can't submit urb\n");
|
|
atomic_set(&data->fw_state, S2255_FW_FAILED);
|
|
/* wake up anything waiting for the firmware */
|
|
wake_up(&data->wait_fw);
|
|
return;
|
|
}
|
|
}
|
|
|
|
|
|
/* this loads the firmware asynchronously.
|
|
Originally this was done synchronously in probe.
|
|
But it is better to load it asynchronously here than block
|
|
inside the probe function. Blocking inside probe affects boot time.
|
|
FW loading is triggered by the timer in the probe function
|
|
*/
|
|
static void s2255_fwchunk_complete(struct urb *urb)
|
|
{
|
|
struct s2255_fw *data = urb->context;
|
|
struct usb_device *udev = urb->dev;
|
|
int len;
|
|
if (urb->status) {
|
|
dev_err(&udev->dev, "URB failed with status %d\n", urb->status);
|
|
atomic_set(&data->fw_state, S2255_FW_FAILED);
|
|
/* wake up anything waiting for the firmware */
|
|
wake_up(&data->wait_fw);
|
|
return;
|
|
}
|
|
if (data->fw_urb == NULL) {
|
|
s2255_dev_err(&udev->dev, "disconnected\n");
|
|
atomic_set(&data->fw_state, S2255_FW_FAILED);
|
|
/* wake up anything waiting for the firmware */
|
|
wake_up(&data->wait_fw);
|
|
return;
|
|
}
|
|
#define CHUNK_SIZE 512
|
|
/* all USB transfers must be done with continuous kernel memory.
|
|
can't allocate more than 128k in current linux kernel, so
|
|
upload the firmware in chunks
|
|
*/
|
|
if (data->fw_loaded < data->fw_size) {
|
|
len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ?
|
|
data->fw_size % CHUNK_SIZE : CHUNK_SIZE;
|
|
|
|
if (len < CHUNK_SIZE)
|
|
memset(data->pfw_data, 0, CHUNK_SIZE);
|
|
|
|
memcpy(data->pfw_data,
|
|
(char *) data->fw->data + data->fw_loaded, len);
|
|
|
|
usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2),
|
|
data->pfw_data, CHUNK_SIZE,
|
|
s2255_fwchunk_complete, data);
|
|
if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
|
|
dev_err(&udev->dev, "failed submit URB\n");
|
|
atomic_set(&data->fw_state, S2255_FW_FAILED);
|
|
/* wake up anything waiting for the firmware */
|
|
wake_up(&data->wait_fw);
|
|
return;
|
|
}
|
|
data->fw_loaded += len;
|
|
} else
|
|
atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT);
|
|
return;
|
|
|
|
}
|
|
|
|
static void s2255_got_frame(struct s2255_vc *vc, int jpgsize)
|
|
{
|
|
struct s2255_buffer *buf;
|
|
struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
|
|
unsigned long flags = 0;
|
|
|
|
spin_lock_irqsave(&vc->qlock, flags);
|
|
if (list_empty(&vc->buf_list)) {
|
|
dprintk(dev, 1, "No active queue to serve\n");
|
|
spin_unlock_irqrestore(&vc->qlock, flags);
|
|
return;
|
|
}
|
|
buf = list_entry(vc->buf_list.next,
|
|
struct s2255_buffer, list);
|
|
list_del(&buf->list);
|
|
buf->vb.vb2_buf.timestamp = ktime_get_ns();
|
|
buf->vb.field = vc->field;
|
|
buf->vb.sequence = vc->frame_count;
|
|
spin_unlock_irqrestore(&vc->qlock, flags);
|
|
|
|
s2255_fillbuff(vc, buf, jpgsize);
|
|
/* tell v4l buffer was filled */
|
|
vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
|
|
dprintk(dev, 2, "%s: [buf] [%p]\n", __func__, buf);
|
|
}
|
|
|
|
static const struct s2255_fmt *format_by_fourcc(int fourcc)
|
|
{
|
|
unsigned int i;
|
|
for (i = 0; i < ARRAY_SIZE(formats); i++) {
|
|
if (-1 == formats[i].fourcc)
|
|
continue;
|
|
if (!jpeg_enable && ((formats[i].fourcc == V4L2_PIX_FMT_JPEG) ||
|
|
(formats[i].fourcc == V4L2_PIX_FMT_MJPEG)))
|
|
continue;
|
|
if (formats[i].fourcc == fourcc)
|
|
return formats + i;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/* video buffer vmalloc implementation based partly on VIVI driver which is
|
|
* Copyright (c) 2006 by
|
|
* Mauro Carvalho Chehab <mchehab--a.t--infradead.org>
|
|
* Ted Walther <ted--a.t--enumera.com>
|
|
* John Sokol <sokol--a.t--videotechnology.com>
|
|
* http://v4l.videotechnology.com/
|
|
*
|
|
*/
|
|
static void s2255_fillbuff(struct s2255_vc *vc,
|
|
struct s2255_buffer *buf, int jpgsize)
|
|
{
|
|
int pos = 0;
|
|
const char *tmpbuf;
|
|
char *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
|
|
unsigned long last_frame;
|
|
struct s2255_dev *dev = vc->dev;
|
|
|
|
if (!vbuf)
|
|
return;
|
|
last_frame = vc->last_frame;
|
|
if (last_frame != -1) {
|
|
tmpbuf =
|
|
(const char *)vc->buffer.frame[last_frame].lpvbits;
|
|
switch (vc->fmt->fourcc) {
|
|
case V4L2_PIX_FMT_YUYV:
|
|
case V4L2_PIX_FMT_UYVY:
|
|
planar422p_to_yuv_packed((const unsigned char *)tmpbuf,
|
|
vbuf, vc->width,
|
|
vc->height,
|
|
vc->fmt->fourcc);
|
|
break;
|
|
case V4L2_PIX_FMT_GREY:
|
|
memcpy(vbuf, tmpbuf, vc->width * vc->height);
|
|
break;
|
|
case V4L2_PIX_FMT_JPEG:
|
|
case V4L2_PIX_FMT_MJPEG:
|
|
vb2_set_plane_payload(&buf->vb.vb2_buf, 0, jpgsize);
|
|
memcpy(vbuf, tmpbuf, jpgsize);
|
|
break;
|
|
case V4L2_PIX_FMT_YUV422P:
|
|
memcpy(vbuf, tmpbuf,
|
|
vc->width * vc->height * 2);
|
|
break;
|
|
default:
|
|
pr_info("s2255: unknown format?\n");
|
|
}
|
|
vc->last_frame = -1;
|
|
} else {
|
|
pr_err("s2255: =======no frame\n");
|
|
return;
|
|
}
|
|
dprintk(dev, 2, "s2255fill at : Buffer %p size= %d\n",
|
|
vbuf, pos);
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------
|
|
Videobuf operations
|
|
------------------------------------------------------------------*/
|
|
|
|
static int queue_setup(struct vb2_queue *vq,
|
|
unsigned int *nbuffers, unsigned int *nplanes,
|
|
unsigned int sizes[], struct device *alloc_devs[])
|
|
{
|
|
struct s2255_vc *vc = vb2_get_drv_priv(vq);
|
|
if (*nbuffers < S2255_MIN_BUFS)
|
|
*nbuffers = S2255_MIN_BUFS;
|
|
*nplanes = 1;
|
|
sizes[0] = vc->width * vc->height * (vc->fmt->depth >> 3);
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct s2255_vc *vc = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct s2255_buffer *buf = container_of(vbuf, struct s2255_buffer, vb);
|
|
int w = vc->width;
|
|
int h = vc->height;
|
|
unsigned long size;
|
|
|
|
dprintk(vc->dev, 4, "%s\n", __func__);
|
|
if (vc->fmt == NULL)
|
|
return -EINVAL;
|
|
|
|
if ((w < norm_minw(vc)) ||
|
|
(w > norm_maxw(vc)) ||
|
|
(h < norm_minh(vc)) ||
|
|
(h > norm_maxh(vc))) {
|
|
dprintk(vc->dev, 4, "invalid buffer prepare\n");
|
|
return -EINVAL;
|
|
}
|
|
size = w * h * (vc->fmt->depth >> 3);
|
|
if (vb2_plane_size(vb, 0) < size) {
|
|
dprintk(vc->dev, 4, "invalid buffer prepare\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
|
|
return 0;
|
|
}
|
|
|
|
static void buffer_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct s2255_buffer *buf = container_of(vbuf, struct s2255_buffer, vb);
|
|
struct s2255_vc *vc = vb2_get_drv_priv(vb->vb2_queue);
|
|
unsigned long flags = 0;
|
|
dprintk(vc->dev, 1, "%s\n", __func__);
|
|
spin_lock_irqsave(&vc->qlock, flags);
|
|
list_add_tail(&buf->list, &vc->buf_list);
|
|
spin_unlock_irqrestore(&vc->qlock, flags);
|
|
}
|
|
|
|
static int start_streaming(struct vb2_queue *vq, unsigned int count);
|
|
static void stop_streaming(struct vb2_queue *vq);
|
|
|
|
static const struct vb2_ops s2255_video_qops = {
|
|
.queue_setup = queue_setup,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_queue = buffer_queue,
|
|
.start_streaming = start_streaming,
|
|
.stop_streaming = stop_streaming,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
};
|
|
|
|
static int vidioc_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
struct s2255_dev *dev = vc->dev;
|
|
|
|
strscpy(cap->driver, "s2255", sizeof(cap->driver));
|
|
strscpy(cap->card, "s2255", sizeof(cap->card));
|
|
usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_fmtdesc *f)
|
|
{
|
|
int index = f->index;
|
|
|
|
if (index >= ARRAY_SIZE(formats))
|
|
return -EINVAL;
|
|
if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) ||
|
|
(formats[index].fourcc == V4L2_PIX_FMT_MJPEG)))
|
|
return -EINVAL;
|
|
f->pixelformat = formats[index].fourcc;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
int is_ntsc = vc->std & V4L2_STD_525_60;
|
|
|
|
f->fmt.pix.width = vc->width;
|
|
f->fmt.pix.height = vc->height;
|
|
if (f->fmt.pix.height >=
|
|
(is_ntsc ? NUM_LINES_1CIFS_NTSC : NUM_LINES_1CIFS_PAL) * 2)
|
|
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
|
|
else
|
|
f->fmt.pix.field = V4L2_FIELD_TOP;
|
|
f->fmt.pix.pixelformat = vc->fmt->fourcc;
|
|
f->fmt.pix.bytesperline = f->fmt.pix.width * (vc->fmt->depth >> 3);
|
|
f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
|
|
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
const struct s2255_fmt *fmt;
|
|
enum v4l2_field field;
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
int is_ntsc = vc->std & V4L2_STD_525_60;
|
|
|
|
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
|
|
|
|
if (fmt == NULL)
|
|
return -EINVAL;
|
|
|
|
field = f->fmt.pix.field;
|
|
|
|
dprintk(vc->dev, 50, "%s NTSC: %d suggested width: %d, height: %d\n",
|
|
__func__, is_ntsc, f->fmt.pix.width, f->fmt.pix.height);
|
|
if (is_ntsc) {
|
|
/* NTSC */
|
|
if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) {
|
|
f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2;
|
|
field = V4L2_FIELD_INTERLACED;
|
|
} else {
|
|
f->fmt.pix.height = NUM_LINES_1CIFS_NTSC;
|
|
field = V4L2_FIELD_TOP;
|
|
}
|
|
if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC)
|
|
f->fmt.pix.width = LINE_SZ_4CIFS_NTSC;
|
|
else
|
|
f->fmt.pix.width = LINE_SZ_1CIFS_NTSC;
|
|
} else {
|
|
/* PAL */
|
|
if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) {
|
|
f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2;
|
|
field = V4L2_FIELD_INTERLACED;
|
|
} else {
|
|
f->fmt.pix.height = NUM_LINES_1CIFS_PAL;
|
|
field = V4L2_FIELD_TOP;
|
|
}
|
|
if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL)
|
|
f->fmt.pix.width = LINE_SZ_4CIFS_PAL;
|
|
else
|
|
f->fmt.pix.width = LINE_SZ_1CIFS_PAL;
|
|
}
|
|
f->fmt.pix.field = field;
|
|
f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
|
|
f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
|
|
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
dprintk(vc->dev, 50, "%s: set width %d height %d field %d\n", __func__,
|
|
f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
const struct s2255_fmt *fmt;
|
|
struct vb2_queue *q = &vc->vb_vidq;
|
|
struct s2255_mode mode;
|
|
int ret;
|
|
|
|
ret = vidioc_try_fmt_vid_cap(file, vc, f);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
|
|
|
|
if (fmt == NULL)
|
|
return -EINVAL;
|
|
|
|
if (vb2_is_busy(q)) {
|
|
dprintk(vc->dev, 1, "queue busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
mode = vc->mode;
|
|
vc->fmt = fmt;
|
|
vc->width = f->fmt.pix.width;
|
|
vc->height = f->fmt.pix.height;
|
|
vc->field = f->fmt.pix.field;
|
|
if (vc->width > norm_minw(vc)) {
|
|
if (vc->height > norm_minh(vc)) {
|
|
if (vc->cap_parm.capturemode &
|
|
V4L2_MODE_HIGHQUALITY)
|
|
mode.scale = SCALE_4CIFSI;
|
|
else
|
|
mode.scale = SCALE_4CIFS;
|
|
} else
|
|
mode.scale = SCALE_2CIFS;
|
|
|
|
} else {
|
|
mode.scale = SCALE_1CIFS;
|
|
}
|
|
/* color mode */
|
|
switch (vc->fmt->fourcc) {
|
|
case V4L2_PIX_FMT_GREY:
|
|
mode.color &= ~MASK_COLOR;
|
|
mode.color |= COLOR_Y8;
|
|
break;
|
|
case V4L2_PIX_FMT_JPEG:
|
|
case V4L2_PIX_FMT_MJPEG:
|
|
mode.color &= ~MASK_COLOR;
|
|
mode.color |= COLOR_JPG;
|
|
mode.color |= (vc->jpegqual << 8);
|
|
break;
|
|
case V4L2_PIX_FMT_YUV422P:
|
|
mode.color &= ~MASK_COLOR;
|
|
mode.color |= COLOR_YUVPL;
|
|
break;
|
|
case V4L2_PIX_FMT_YUYV:
|
|
case V4L2_PIX_FMT_UYVY:
|
|
default:
|
|
mode.color &= ~MASK_COLOR;
|
|
mode.color |= COLOR_YUVPK;
|
|
break;
|
|
}
|
|
if ((mode.color & MASK_COLOR) != (vc->mode.color & MASK_COLOR))
|
|
mode.restart = 1;
|
|
else if (mode.scale != vc->mode.scale)
|
|
mode.restart = 1;
|
|
else if (mode.format != vc->mode.format)
|
|
mode.restart = 1;
|
|
vc->mode = mode;
|
|
(void) s2255_set_mode(vc, &mode);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* write to the configuration pipe, synchronously */
|
|
static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf,
|
|
int size)
|
|
{
|
|
int pipe;
|
|
int done;
|
|
long retval = -1;
|
|
if (udev) {
|
|
pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP);
|
|
retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
static u32 get_transfer_size(struct s2255_mode *mode)
|
|
{
|
|
int linesPerFrame = LINE_SZ_DEF;
|
|
int pixelsPerLine = NUM_LINES_DEF;
|
|
u32 outImageSize;
|
|
u32 usbInSize;
|
|
unsigned int mask_mult;
|
|
|
|
if (mode == NULL)
|
|
return 0;
|
|
|
|
if (mode->format == FORMAT_NTSC) {
|
|
switch (mode->scale) {
|
|
case SCALE_4CIFS:
|
|
case SCALE_4CIFSI:
|
|
linesPerFrame = NUM_LINES_4CIFS_NTSC * 2;
|
|
pixelsPerLine = LINE_SZ_4CIFS_NTSC;
|
|
break;
|
|
case SCALE_2CIFS:
|
|
linesPerFrame = NUM_LINES_2CIFS_NTSC;
|
|
pixelsPerLine = LINE_SZ_2CIFS_NTSC;
|
|
break;
|
|
case SCALE_1CIFS:
|
|
linesPerFrame = NUM_LINES_1CIFS_NTSC;
|
|
pixelsPerLine = LINE_SZ_1CIFS_NTSC;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else if (mode->format == FORMAT_PAL) {
|
|
switch (mode->scale) {
|
|
case SCALE_4CIFS:
|
|
case SCALE_4CIFSI:
|
|
linesPerFrame = NUM_LINES_4CIFS_PAL * 2;
|
|
pixelsPerLine = LINE_SZ_4CIFS_PAL;
|
|
break;
|
|
case SCALE_2CIFS:
|
|
linesPerFrame = NUM_LINES_2CIFS_PAL;
|
|
pixelsPerLine = LINE_SZ_2CIFS_PAL;
|
|
break;
|
|
case SCALE_1CIFS:
|
|
linesPerFrame = NUM_LINES_1CIFS_PAL;
|
|
pixelsPerLine = LINE_SZ_1CIFS_PAL;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
outImageSize = linesPerFrame * pixelsPerLine;
|
|
if ((mode->color & MASK_COLOR) != COLOR_Y8) {
|
|
/* 2 bytes/pixel if not monochrome */
|
|
outImageSize *= 2;
|
|
}
|
|
|
|
/* total bytes to send including prefix and 4K padding;
|
|
must be a multiple of USB_READ_SIZE */
|
|
usbInSize = outImageSize + PREFIX_SIZE; /* always send prefix */
|
|
mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1;
|
|
/* if size not a multiple of USB_READ_SIZE */
|
|
if (usbInSize & ~mask_mult)
|
|
usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK);
|
|
return usbInSize;
|
|
}
|
|
|
|
static void s2255_print_cfg(struct s2255_dev *sdev, struct s2255_mode *mode)
|
|
{
|
|
struct device *dev = &sdev->udev->dev;
|
|
dev_info(dev, "------------------------------------------------\n");
|
|
dev_info(dev, "format: %d\nscale %d\n", mode->format, mode->scale);
|
|
dev_info(dev, "fdec: %d\ncolor %d\n", mode->fdec, mode->color);
|
|
dev_info(dev, "bright: 0x%x\n", mode->bright);
|
|
dev_info(dev, "------------------------------------------------\n");
|
|
}
|
|
|
|
/*
|
|
* set mode is the function which controls the DSP.
|
|
* the restart parameter in struct s2255_mode should be set whenever
|
|
* the image size could change via color format, video system or image
|
|
* size.
|
|
* When the restart parameter is set, we sleep for ONE frame to allow the
|
|
* DSP time to get the new frame
|
|
*/
|
|
static int s2255_set_mode(struct s2255_vc *vc,
|
|
struct s2255_mode *mode)
|
|
{
|
|
int res;
|
|
unsigned long chn_rev;
|
|
struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
|
|
int i;
|
|
__le32 *buffer = dev->cmdbuf;
|
|
|
|
mutex_lock(&dev->cmdlock);
|
|
chn_rev = G_chnmap[vc->idx];
|
|
dprintk(dev, 3, "%s channel: %d\n", __func__, vc->idx);
|
|
/* if JPEG, set the quality */
|
|
if ((mode->color & MASK_COLOR) == COLOR_JPG) {
|
|
mode->color &= ~MASK_COLOR;
|
|
mode->color |= COLOR_JPG;
|
|
mode->color &= ~MASK_JPG_QUALITY;
|
|
mode->color |= (vc->jpegqual << 8);
|
|
}
|
|
/* save the mode */
|
|
vc->mode = *mode;
|
|
vc->req_image_size = get_transfer_size(mode);
|
|
dprintk(dev, 1, "%s: reqsize %ld\n", __func__, vc->req_image_size);
|
|
/* set the mode */
|
|
buffer[0] = IN_DATA_TOKEN;
|
|
buffer[1] = (__le32) cpu_to_le32(chn_rev);
|
|
buffer[2] = CMD_SET_MODE;
|
|
for (i = 0; i < sizeof(struct s2255_mode) / sizeof(u32); i++)
|
|
buffer[3 + i] = cpu_to_le32(((u32 *)&vc->mode)[i]);
|
|
vc->setmode_ready = 0;
|
|
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
|
|
if (debug)
|
|
s2255_print_cfg(dev, mode);
|
|
/* wait at least 3 frames before continuing */
|
|
if (mode->restart) {
|
|
wait_event_timeout(vc->wait_setmode,
|
|
(vc->setmode_ready != 0),
|
|
msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
|
|
if (vc->setmode_ready != 1) {
|
|
dprintk(dev, 0, "s2255: no set mode response\n");
|
|
res = -EFAULT;
|
|
}
|
|
}
|
|
/* clear the restart flag */
|
|
vc->mode.restart = 0;
|
|
dprintk(dev, 1, "%s chn %d, result: %d\n", __func__, vc->idx, res);
|
|
mutex_unlock(&dev->cmdlock);
|
|
return res;
|
|
}
|
|
|
|
static int s2255_cmd_status(struct s2255_vc *vc, u32 *pstatus)
|
|
{
|
|
int res;
|
|
u32 chn_rev;
|
|
struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
|
|
__le32 *buffer = dev->cmdbuf;
|
|
|
|
mutex_lock(&dev->cmdlock);
|
|
chn_rev = G_chnmap[vc->idx];
|
|
dprintk(dev, 4, "%s chan %d\n", __func__, vc->idx);
|
|
/* form the get vid status command */
|
|
buffer[0] = IN_DATA_TOKEN;
|
|
buffer[1] = (__le32) cpu_to_le32(chn_rev);
|
|
buffer[2] = CMD_STATUS;
|
|
*pstatus = 0;
|
|
vc->vidstatus_ready = 0;
|
|
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
|
|
wait_event_timeout(vc->wait_vidstatus,
|
|
(vc->vidstatus_ready != 0),
|
|
msecs_to_jiffies(S2255_VIDSTATUS_TIMEOUT));
|
|
if (vc->vidstatus_ready != 1) {
|
|
dprintk(dev, 0, "s2255: no vidstatus response\n");
|
|
res = -EFAULT;
|
|
}
|
|
*pstatus = vc->vidstatus;
|
|
dprintk(dev, 4, "%s, vid status %d\n", __func__, *pstatus);
|
|
mutex_unlock(&dev->cmdlock);
|
|
return res;
|
|
}
|
|
|
|
static int start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct s2255_vc *vc = vb2_get_drv_priv(vq);
|
|
int j;
|
|
|
|
vc->last_frame = -1;
|
|
vc->bad_payload = 0;
|
|
vc->cur_frame = 0;
|
|
vc->frame_count = 0;
|
|
for (j = 0; j < SYS_FRAMES; j++) {
|
|
vc->buffer.frame[j].ulState = S2255_READ_IDLE;
|
|
vc->buffer.frame[j].cur_size = 0;
|
|
}
|
|
return s2255_start_acquire(vc);
|
|
}
|
|
|
|
/* abort streaming and wait for last buffer */
|
|
static void stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct s2255_vc *vc = vb2_get_drv_priv(vq);
|
|
struct s2255_buffer *buf, *node;
|
|
unsigned long flags;
|
|
(void) s2255_stop_acquire(vc);
|
|
spin_lock_irqsave(&vc->qlock, flags);
|
|
list_for_each_entry_safe(buf, node, &vc->buf_list, list) {
|
|
list_del(&buf->list);
|
|
vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
|
|
dprintk(vc->dev, 2, "[%p/%d] done\n",
|
|
buf, buf->vb.vb2_buf.index);
|
|
}
|
|
spin_unlock_irqrestore(&vc->qlock, flags);
|
|
}
|
|
|
|
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id i)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
struct s2255_mode mode;
|
|
struct vb2_queue *q = &vc->vb_vidq;
|
|
|
|
/*
|
|
* Changing the standard implies a format change, which is not allowed
|
|
* while buffers for use with streaming have already been allocated.
|
|
*/
|
|
if (vb2_is_busy(q))
|
|
return -EBUSY;
|
|
|
|
mode = vc->mode;
|
|
if (i & V4L2_STD_525_60) {
|
|
dprintk(vc->dev, 4, "%s 60 Hz\n", __func__);
|
|
/* if changing format, reset frame decimation/intervals */
|
|
if (mode.format != FORMAT_NTSC) {
|
|
mode.restart = 1;
|
|
mode.format = FORMAT_NTSC;
|
|
mode.fdec = FDEC_1;
|
|
vc->width = LINE_SZ_4CIFS_NTSC;
|
|
vc->height = NUM_LINES_4CIFS_NTSC * 2;
|
|
}
|
|
} else if (i & V4L2_STD_625_50) {
|
|
dprintk(vc->dev, 4, "%s 50 Hz\n", __func__);
|
|
if (mode.format != FORMAT_PAL) {
|
|
mode.restart = 1;
|
|
mode.format = FORMAT_PAL;
|
|
mode.fdec = FDEC_1;
|
|
vc->width = LINE_SZ_4CIFS_PAL;
|
|
vc->height = NUM_LINES_4CIFS_PAL * 2;
|
|
}
|
|
} else
|
|
return -EINVAL;
|
|
vc->std = i;
|
|
if (mode.restart)
|
|
s2255_set_mode(vc, &mode);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *i)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
|
|
*i = vc->std;
|
|
return 0;
|
|
}
|
|
|
|
/* Sensoray 2255 is a multiple channel capture device.
|
|
It does not have a "crossbar" of inputs.
|
|
We use one V4L device per channel. The user must
|
|
be aware that certain combinations are not allowed.
|
|
For instance, you cannot do full FPS on more than 2 channels(2 videodevs)
|
|
at once in color(you can do full fps on 4 channels with greyscale.
|
|
*/
|
|
static int vidioc_enum_input(struct file *file, void *priv,
|
|
struct v4l2_input *inp)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
struct s2255_dev *dev = vc->dev;
|
|
u32 status = 0;
|
|
|
|
if (inp->index != 0)
|
|
return -EINVAL;
|
|
inp->type = V4L2_INPUT_TYPE_CAMERA;
|
|
inp->std = S2255_NORMS;
|
|
inp->status = 0;
|
|
if (dev->dsp_fw_ver >= S2255_MIN_DSP_STATUS) {
|
|
int rc;
|
|
rc = s2255_cmd_status(vc, &status);
|
|
dprintk(dev, 4, "s2255_cmd_status rc: %d status %x\n",
|
|
rc, status);
|
|
if (rc == 0)
|
|
inp->status = (status & 0x01) ? 0
|
|
: V4L2_IN_ST_NO_SIGNAL;
|
|
}
|
|
switch (dev->pid) {
|
|
case 0x2255:
|
|
default:
|
|
strscpy(inp->name, "Composite", sizeof(inp->name));
|
|
break;
|
|
case 0x2257:
|
|
strscpy(inp->name, (vc->idx < 2) ? "Composite" : "S-Video",
|
|
sizeof(inp->name));
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
|
|
{
|
|
*i = 0;
|
|
return 0;
|
|
}
|
|
static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
|
|
{
|
|
if (i > 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static int s2255_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct s2255_vc *vc =
|
|
container_of(ctrl->handler, struct s2255_vc, hdl);
|
|
struct s2255_mode mode;
|
|
mode = vc->mode;
|
|
/* update the mode to the corresponding value */
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
mode.bright = ctrl->val;
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
mode.contrast = ctrl->val;
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
mode.hue = ctrl->val;
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
mode.saturation = ctrl->val;
|
|
break;
|
|
case V4L2_CID_S2255_COLORFILTER:
|
|
mode.color &= ~MASK_INPUT_TYPE;
|
|
mode.color |= !ctrl->val << 16;
|
|
break;
|
|
case V4L2_CID_JPEG_COMPRESSION_QUALITY:
|
|
vc->jpegqual = ctrl->val;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
mode.restart = 0;
|
|
/* set mode here. Note: stream does not need restarted.
|
|
some V4L programs restart stream unnecessarily
|
|
after a s_crtl.
|
|
*/
|
|
s2255_set_mode(vc, &mode);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_jpegcomp(struct file *file, void *priv,
|
|
struct v4l2_jpegcompression *jc)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
|
|
memset(jc, 0, sizeof(*jc));
|
|
jc->quality = vc->jpegqual;
|
|
dprintk(vc->dev, 2, "%s: quality %d\n", __func__, jc->quality);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_jpegcomp(struct file *file, void *priv,
|
|
const struct v4l2_jpegcompression *jc)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
|
|
if (jc->quality < 0 || jc->quality > 100)
|
|
return -EINVAL;
|
|
v4l2_ctrl_s_ctrl(vc->jpegqual_ctrl, jc->quality);
|
|
dprintk(vc->dev, 2, "%s: quality %d\n", __func__, jc->quality);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_parm(struct file *file, void *priv,
|
|
struct v4l2_streamparm *sp)
|
|
{
|
|
__u32 def_num, def_dem;
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
|
|
if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
sp->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
|
|
sp->parm.capture.capturemode = vc->cap_parm.capturemode;
|
|
sp->parm.capture.readbuffers = S2255_MIN_BUFS;
|
|
def_num = (vc->mode.format == FORMAT_NTSC) ? 1001 : 1000;
|
|
def_dem = (vc->mode.format == FORMAT_NTSC) ? 30000 : 25000;
|
|
sp->parm.capture.timeperframe.denominator = def_dem;
|
|
switch (vc->mode.fdec) {
|
|
default:
|
|
case FDEC_1:
|
|
sp->parm.capture.timeperframe.numerator = def_num;
|
|
break;
|
|
case FDEC_2:
|
|
sp->parm.capture.timeperframe.numerator = def_num * 2;
|
|
break;
|
|
case FDEC_3:
|
|
sp->parm.capture.timeperframe.numerator = def_num * 3;
|
|
break;
|
|
case FDEC_5:
|
|
sp->parm.capture.timeperframe.numerator = def_num * 5;
|
|
break;
|
|
}
|
|
dprintk(vc->dev, 4, "%s capture mode, %d timeperframe %d/%d\n",
|
|
__func__,
|
|
sp->parm.capture.capturemode,
|
|
sp->parm.capture.timeperframe.numerator,
|
|
sp->parm.capture.timeperframe.denominator);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_parm(struct file *file, void *priv,
|
|
struct v4l2_streamparm *sp)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
struct s2255_mode mode;
|
|
int fdec = FDEC_1;
|
|
__u32 def_num, def_dem;
|
|
if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
mode = vc->mode;
|
|
/* high quality capture mode requires a stream restart */
|
|
if ((vc->cap_parm.capturemode != sp->parm.capture.capturemode)
|
|
&& vb2_is_streaming(&vc->vb_vidq))
|
|
return -EBUSY;
|
|
def_num = (mode.format == FORMAT_NTSC) ? 1001 : 1000;
|
|
def_dem = (mode.format == FORMAT_NTSC) ? 30000 : 25000;
|
|
if (def_dem != sp->parm.capture.timeperframe.denominator)
|
|
sp->parm.capture.timeperframe.numerator = def_num;
|
|
else if (sp->parm.capture.timeperframe.numerator <= def_num)
|
|
sp->parm.capture.timeperframe.numerator = def_num;
|
|
else if (sp->parm.capture.timeperframe.numerator <= (def_num * 2)) {
|
|
sp->parm.capture.timeperframe.numerator = def_num * 2;
|
|
fdec = FDEC_2;
|
|
} else if (sp->parm.capture.timeperframe.numerator <= (def_num * 3)) {
|
|
sp->parm.capture.timeperframe.numerator = def_num * 3;
|
|
fdec = FDEC_3;
|
|
} else {
|
|
sp->parm.capture.timeperframe.numerator = def_num * 5;
|
|
fdec = FDEC_5;
|
|
}
|
|
mode.fdec = fdec;
|
|
sp->parm.capture.timeperframe.denominator = def_dem;
|
|
sp->parm.capture.readbuffers = S2255_MIN_BUFS;
|
|
s2255_set_mode(vc, &mode);
|
|
dprintk(vc->dev, 4, "%s capture mode, %d timeperframe %d/%d, fdec %d\n",
|
|
__func__,
|
|
sp->parm.capture.capturemode,
|
|
sp->parm.capture.timeperframe.numerator,
|
|
sp->parm.capture.timeperframe.denominator, fdec);
|
|
return 0;
|
|
}
|
|
|
|
#define NUM_SIZE_ENUMS 3
|
|
static const struct v4l2_frmsize_discrete ntsc_sizes[] = {
|
|
{ 640, 480 },
|
|
{ 640, 240 },
|
|
{ 320, 240 },
|
|
};
|
|
static const struct v4l2_frmsize_discrete pal_sizes[] = {
|
|
{ 704, 576 },
|
|
{ 704, 288 },
|
|
{ 352, 288 },
|
|
};
|
|
|
|
static int vidioc_enum_framesizes(struct file *file, void *priv,
|
|
struct v4l2_frmsizeenum *fe)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
int is_ntsc = vc->std & V4L2_STD_525_60;
|
|
const struct s2255_fmt *fmt;
|
|
|
|
if (fe->index >= NUM_SIZE_ENUMS)
|
|
return -EINVAL;
|
|
|
|
fmt = format_by_fourcc(fe->pixel_format);
|
|
if (fmt == NULL)
|
|
return -EINVAL;
|
|
fe->type = V4L2_FRMSIZE_TYPE_DISCRETE;
|
|
fe->discrete = is_ntsc ? ntsc_sizes[fe->index] : pal_sizes[fe->index];
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_enum_frameintervals(struct file *file, void *priv,
|
|
struct v4l2_frmivalenum *fe)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
const struct s2255_fmt *fmt;
|
|
const struct v4l2_frmsize_discrete *sizes;
|
|
int is_ntsc = vc->std & V4L2_STD_525_60;
|
|
#define NUM_FRAME_ENUMS 4
|
|
int frm_dec[NUM_FRAME_ENUMS] = {1, 2, 3, 5};
|
|
int i;
|
|
|
|
if (fe->index >= NUM_FRAME_ENUMS)
|
|
return -EINVAL;
|
|
|
|
fmt = format_by_fourcc(fe->pixel_format);
|
|
if (fmt == NULL)
|
|
return -EINVAL;
|
|
|
|
sizes = is_ntsc ? ntsc_sizes : pal_sizes;
|
|
for (i = 0; i < NUM_SIZE_ENUMS; i++, sizes++)
|
|
if (fe->width == sizes->width &&
|
|
fe->height == sizes->height)
|
|
break;
|
|
if (i == NUM_SIZE_ENUMS)
|
|
return -EINVAL;
|
|
|
|
fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
|
|
fe->discrete.denominator = is_ntsc ? 30000 : 25000;
|
|
fe->discrete.numerator = (is_ntsc ? 1001 : 1000) * frm_dec[fe->index];
|
|
dprintk(vc->dev, 4, "%s discrete %d/%d\n", __func__,
|
|
fe->discrete.numerator,
|
|
fe->discrete.denominator);
|
|
return 0;
|
|
}
|
|
|
|
static int s2255_open(struct file *file)
|
|
{
|
|
struct s2255_vc *vc = video_drvdata(file);
|
|
struct s2255_dev *dev = vc->dev;
|
|
int state;
|
|
int rc = 0;
|
|
|
|
rc = v4l2_fh_open(file);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
dprintk(dev, 1, "s2255: %s\n", __func__);
|
|
state = atomic_read(&dev->fw_data->fw_state);
|
|
switch (state) {
|
|
case S2255_FW_DISCONNECTING:
|
|
return -ENODEV;
|
|
case S2255_FW_FAILED:
|
|
s2255_dev_err(&dev->udev->dev,
|
|
"firmware load failed. retrying.\n");
|
|
s2255_fwload_start(dev);
|
|
wait_event_timeout(dev->fw_data->wait_fw,
|
|
((atomic_read(&dev->fw_data->fw_state)
|
|
== S2255_FW_SUCCESS) ||
|
|
(atomic_read(&dev->fw_data->fw_state)
|
|
== S2255_FW_DISCONNECTING)),
|
|
msecs_to_jiffies(S2255_LOAD_TIMEOUT));
|
|
/* state may have changed, re-read */
|
|
state = atomic_read(&dev->fw_data->fw_state);
|
|
break;
|
|
case S2255_FW_NOTLOADED:
|
|
case S2255_FW_LOADED_DSPWAIT:
|
|
/* give S2255_LOAD_TIMEOUT time for firmware to load in case
|
|
driver loaded and then device immediately opened */
|
|
pr_info("%s waiting for firmware load\n", __func__);
|
|
wait_event_timeout(dev->fw_data->wait_fw,
|
|
((atomic_read(&dev->fw_data->fw_state)
|
|
== S2255_FW_SUCCESS) ||
|
|
(atomic_read(&dev->fw_data->fw_state)
|
|
== S2255_FW_DISCONNECTING)),
|
|
msecs_to_jiffies(S2255_LOAD_TIMEOUT));
|
|
/* state may have changed, re-read */
|
|
state = atomic_read(&dev->fw_data->fw_state);
|
|
break;
|
|
case S2255_FW_SUCCESS:
|
|
default:
|
|
break;
|
|
}
|
|
/* state may have changed in above switch statement */
|
|
switch (state) {
|
|
case S2255_FW_SUCCESS:
|
|
break;
|
|
case S2255_FW_FAILED:
|
|
pr_info("2255 firmware load failed.\n");
|
|
return -ENODEV;
|
|
case S2255_FW_DISCONNECTING:
|
|
pr_info("%s: disconnecting\n", __func__);
|
|
return -ENODEV;
|
|
case S2255_FW_LOADED_DSPWAIT:
|
|
case S2255_FW_NOTLOADED:
|
|
pr_info("%s: firmware not loaded, please retry\n",
|
|
__func__);
|
|
/*
|
|
* Timeout on firmware load means device unusable.
|
|
* Set firmware failure state.
|
|
* On next s2255_open the firmware will be reloaded.
|
|
*/
|
|
atomic_set(&dev->fw_data->fw_state,
|
|
S2255_FW_FAILED);
|
|
return -EAGAIN;
|
|
default:
|
|
pr_info("%s: unknown state\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
if (!vc->configured) {
|
|
/* configure channel to default state */
|
|
vc->fmt = &formats[0];
|
|
s2255_set_mode(vc, &vc->mode);
|
|
vc->configured = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void s2255_destroy(struct s2255_dev *dev)
|
|
{
|
|
dprintk(dev, 1, "%s", __func__);
|
|
/* board shutdown stops the read pipe if it is running */
|
|
s2255_board_shutdown(dev);
|
|
/* make sure firmware still not trying to load */
|
|
del_timer_sync(&dev->timer); /* only started in .probe and .open */
|
|
if (dev->fw_data->fw_urb) {
|
|
usb_kill_urb(dev->fw_data->fw_urb);
|
|
usb_free_urb(dev->fw_data->fw_urb);
|
|
dev->fw_data->fw_urb = NULL;
|
|
}
|
|
release_firmware(dev->fw_data->fw);
|
|
kfree(dev->fw_data->pfw_data);
|
|
kfree(dev->fw_data);
|
|
/* reset the DSP so firmware can be reloaded next time */
|
|
s2255_reset_dsppower(dev);
|
|
mutex_destroy(&dev->lock);
|
|
usb_put_dev(dev->udev);
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
kfree(dev->cmdbuf);
|
|
kfree(dev);
|
|
}
|
|
|
|
static const struct v4l2_file_operations s2255_fops_v4l = {
|
|
.owner = THIS_MODULE,
|
|
.open = s2255_open,
|
|
.release = vb2_fop_release,
|
|
.poll = vb2_fop_poll,
|
|
.unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
|
|
.mmap = vb2_fop_mmap,
|
|
.read = vb2_fop_read,
|
|
};
|
|
|
|
static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
|
|
.vidioc_querycap = vidioc_querycap,
|
|
.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
|
|
.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
|
|
.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
|
|
.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
|
|
.vidioc_reqbufs = vb2_ioctl_reqbufs,
|
|
.vidioc_querybuf = vb2_ioctl_querybuf,
|
|
.vidioc_qbuf = vb2_ioctl_qbuf,
|
|
.vidioc_dqbuf = vb2_ioctl_dqbuf,
|
|
.vidioc_s_std = vidioc_s_std,
|
|
.vidioc_g_std = vidioc_g_std,
|
|
.vidioc_enum_input = vidioc_enum_input,
|
|
.vidioc_g_input = vidioc_g_input,
|
|
.vidioc_s_input = vidioc_s_input,
|
|
.vidioc_streamon = vb2_ioctl_streamon,
|
|
.vidioc_streamoff = vb2_ioctl_streamoff,
|
|
.vidioc_s_jpegcomp = vidioc_s_jpegcomp,
|
|
.vidioc_g_jpegcomp = vidioc_g_jpegcomp,
|
|
.vidioc_s_parm = vidioc_s_parm,
|
|
.vidioc_g_parm = vidioc_g_parm,
|
|
.vidioc_enum_framesizes = vidioc_enum_framesizes,
|
|
.vidioc_enum_frameintervals = vidioc_enum_frameintervals,
|
|
.vidioc_log_status = v4l2_ctrl_log_status,
|
|
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
|
|
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
|
|
};
|
|
|
|
static void s2255_video_device_release(struct video_device *vdev)
|
|
{
|
|
struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev);
|
|
struct s2255_vc *vc =
|
|
container_of(vdev, struct s2255_vc, vdev);
|
|
|
|
dprintk(dev, 4, "%s, chnls: %d\n", __func__,
|
|
atomic_read(&dev->num_channels));
|
|
|
|
v4l2_ctrl_handler_free(&vc->hdl);
|
|
|
|
if (atomic_dec_and_test(&dev->num_channels))
|
|
s2255_destroy(dev);
|
|
return;
|
|
}
|
|
|
|
static const struct video_device template = {
|
|
.name = "s2255v",
|
|
.fops = &s2255_fops_v4l,
|
|
.ioctl_ops = &s2255_ioctl_ops,
|
|
.release = s2255_video_device_release,
|
|
.tvnorms = S2255_NORMS,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_ops s2255_ctrl_ops = {
|
|
.s_ctrl = s2255_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config color_filter_ctrl = {
|
|
.ops = &s2255_ctrl_ops,
|
|
.name = "Color Filter",
|
|
.id = V4L2_CID_S2255_COLORFILTER,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.max = 1,
|
|
.step = 1,
|
|
.def = 1,
|
|
};
|
|
|
|
static int s2255_probe_v4l(struct s2255_dev *dev)
|
|
{
|
|
int ret;
|
|
int i;
|
|
int cur_nr = video_nr;
|
|
struct s2255_vc *vc;
|
|
struct vb2_queue *q;
|
|
|
|
ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev);
|
|
if (ret)
|
|
return ret;
|
|
/* initialize all video 4 linux */
|
|
/* register 4 video devices */
|
|
for (i = 0; i < MAX_CHANNELS; i++) {
|
|
vc = &dev->vc[i];
|
|
INIT_LIST_HEAD(&vc->buf_list);
|
|
|
|
v4l2_ctrl_handler_init(&vc->hdl, 6);
|
|
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, -127, 127, 1, DEF_BRIGHT);
|
|
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
|
|
V4L2_CID_CONTRAST, 0, 255, 1, DEF_CONTRAST);
|
|
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 255, 1, DEF_SATURATION);
|
|
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
|
|
V4L2_CID_HUE, 0, 255, 1, DEF_HUE);
|
|
vc->jpegqual_ctrl = v4l2_ctrl_new_std(&vc->hdl,
|
|
&s2255_ctrl_ops,
|
|
V4L2_CID_JPEG_COMPRESSION_QUALITY,
|
|
0, 100, 1, S2255_DEF_JPEG_QUAL);
|
|
if (dev->dsp_fw_ver >= S2255_MIN_DSP_COLORFILTER &&
|
|
(dev->pid != 0x2257 || vc->idx <= 1))
|
|
v4l2_ctrl_new_custom(&vc->hdl, &color_filter_ctrl,
|
|
NULL);
|
|
if (vc->hdl.error) {
|
|
ret = vc->hdl.error;
|
|
v4l2_ctrl_handler_free(&vc->hdl);
|
|
dev_err(&dev->udev->dev, "couldn't register control\n");
|
|
break;
|
|
}
|
|
q = &vc->vb_vidq;
|
|
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
q->io_modes = VB2_MMAP | VB2_READ | VB2_USERPTR;
|
|
q->drv_priv = vc;
|
|
q->lock = &vc->vb_lock;
|
|
q->buf_struct_size = sizeof(struct s2255_buffer);
|
|
q->mem_ops = &vb2_vmalloc_memops;
|
|
q->ops = &s2255_video_qops;
|
|
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
ret = vb2_queue_init(q);
|
|
if (ret != 0) {
|
|
dev_err(&dev->udev->dev,
|
|
"%s vb2_queue_init 0x%x\n", __func__, ret);
|
|
break;
|
|
}
|
|
/* register video devices */
|
|
vc->vdev = template;
|
|
vc->vdev.queue = q;
|
|
vc->vdev.ctrl_handler = &vc->hdl;
|
|
vc->vdev.lock = &dev->lock;
|
|
vc->vdev.v4l2_dev = &dev->v4l2_dev;
|
|
vc->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE |
|
|
V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
|
|
video_set_drvdata(&vc->vdev, vc);
|
|
if (video_nr == -1)
|
|
ret = video_register_device(&vc->vdev,
|
|
VFL_TYPE_VIDEO,
|
|
video_nr);
|
|
else
|
|
ret = video_register_device(&vc->vdev,
|
|
VFL_TYPE_VIDEO,
|
|
cur_nr + i);
|
|
|
|
if (ret) {
|
|
dev_err(&dev->udev->dev,
|
|
"failed to register video device!\n");
|
|
break;
|
|
}
|
|
atomic_inc(&dev->num_channels);
|
|
v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
|
|
video_device_node_name(&vc->vdev));
|
|
|
|
}
|
|
pr_info("Sensoray 2255 V4L driver Revision: %s\n",
|
|
S2255_VERSION);
|
|
/* if no channels registered, return error and probe will fail*/
|
|
if (atomic_read(&dev->num_channels) == 0) {
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
return ret;
|
|
}
|
|
if (atomic_read(&dev->num_channels) != MAX_CHANNELS)
|
|
pr_warn("s2255: Not all channels available.\n");
|
|
return 0;
|
|
}
|
|
|
|
/* this function moves the usb stream read pipe data
|
|
* into the system buffers.
|
|
* returns 0 on success, EAGAIN if more data to process( call this
|
|
* function again).
|
|
*
|
|
* Received frame structure:
|
|
* bytes 0-3: marker : 0x2255DA4AL (S2255_MARKER_FRAME)
|
|
* bytes 4-7: channel: 0-3
|
|
* bytes 8-11: payload size: size of the frame
|
|
* bytes 12-payloadsize+12: frame data
|
|
*/
|
|
static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
|
|
{
|
|
char *pdest;
|
|
u32 offset = 0;
|
|
int bframe = 0;
|
|
char *psrc;
|
|
unsigned long copy_size;
|
|
unsigned long size;
|
|
s32 idx = -1;
|
|
struct s2255_framei *frm;
|
|
unsigned char *pdata;
|
|
struct s2255_vc *vc;
|
|
dprintk(dev, 100, "buffer to user\n");
|
|
vc = &dev->vc[dev->cc];
|
|
idx = vc->cur_frame;
|
|
frm = &vc->buffer.frame[idx];
|
|
if (frm->ulState == S2255_READ_IDLE) {
|
|
int jj;
|
|
unsigned int cc;
|
|
__le32 *pdword; /*data from dsp is little endian */
|
|
int payload;
|
|
/* search for marker codes */
|
|
pdata = (unsigned char *)pipe_info->transfer_buffer;
|
|
pdword = (__le32 *)pdata;
|
|
for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) {
|
|
switch (*pdword) {
|
|
case S2255_MARKER_FRAME:
|
|
dprintk(dev, 4, "marker @ offset: %d [%x %x]\n",
|
|
jj, pdata[0], pdata[1]);
|
|
offset = jj + PREFIX_SIZE;
|
|
bframe = 1;
|
|
cc = le32_to_cpu(pdword[1]);
|
|
if (cc >= MAX_CHANNELS) {
|
|
dprintk(dev, 0,
|
|
"bad channel\n");
|
|
return -EINVAL;
|
|
}
|
|
/* reverse it */
|
|
dev->cc = G_chnmap[cc];
|
|
vc = &dev->vc[dev->cc];
|
|
payload = le32_to_cpu(pdword[3]);
|
|
if (payload > vc->req_image_size) {
|
|
vc->bad_payload++;
|
|
/* discard the bad frame */
|
|
return -EINVAL;
|
|
}
|
|
vc->pkt_size = payload;
|
|
vc->jpg_size = le32_to_cpu(pdword[4]);
|
|
break;
|
|
case S2255_MARKER_RESPONSE:
|
|
|
|
pdata += DEF_USB_BLOCK;
|
|
jj += DEF_USB_BLOCK;
|
|
if (le32_to_cpu(pdword[1]) >= MAX_CHANNELS)
|
|
break;
|
|
cc = G_chnmap[le32_to_cpu(pdword[1])];
|
|
if (cc >= MAX_CHANNELS)
|
|
break;
|
|
vc = &dev->vc[cc];
|
|
switch (pdword[2]) {
|
|
case S2255_RESPONSE_SETMODE:
|
|
/* check if channel valid */
|
|
/* set mode ready */
|
|
vc->setmode_ready = 1;
|
|
wake_up(&vc->wait_setmode);
|
|
dprintk(dev, 5, "setmode rdy %d\n", cc);
|
|
break;
|
|
case S2255_RESPONSE_FW:
|
|
dev->chn_ready |= (1 << cc);
|
|
if ((dev->chn_ready & 0x0f) != 0x0f)
|
|
break;
|
|
/* all channels ready */
|
|
pr_info("s2255: fw loaded\n");
|
|
atomic_set(&dev->fw_data->fw_state,
|
|
S2255_FW_SUCCESS);
|
|
wake_up(&dev->fw_data->wait_fw);
|
|
break;
|
|
case S2255_RESPONSE_STATUS:
|
|
vc->vidstatus = le32_to_cpu(pdword[3]);
|
|
vc->vidstatus_ready = 1;
|
|
wake_up(&vc->wait_vidstatus);
|
|
dprintk(dev, 5, "vstat %x chan %d\n",
|
|
le32_to_cpu(pdword[3]), cc);
|
|
break;
|
|
default:
|
|
pr_info("s2255 unknown resp\n");
|
|
}
|
|
pdata++;
|
|
break;
|
|
default:
|
|
pdata++;
|
|
break;
|
|
}
|
|
if (bframe)
|
|
break;
|
|
} /* for */
|
|
if (!bframe)
|
|
return -EINVAL;
|
|
}
|
|
vc = &dev->vc[dev->cc];
|
|
idx = vc->cur_frame;
|
|
frm = &vc->buffer.frame[idx];
|
|
/* search done. now find out if should be acquiring on this channel */
|
|
if (!vb2_is_streaming(&vc->vb_vidq)) {
|
|
/* we found a frame, but this channel is turned off */
|
|
frm->ulState = S2255_READ_IDLE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (frm->ulState == S2255_READ_IDLE) {
|
|
frm->ulState = S2255_READ_FRAME;
|
|
frm->cur_size = 0;
|
|
}
|
|
|
|
/* skip the marker 512 bytes (and offset if out of sync) */
|
|
psrc = (u8 *)pipe_info->transfer_buffer + offset;
|
|
|
|
|
|
if (frm->lpvbits == NULL) {
|
|
dprintk(dev, 1, "s2255 frame buffer == NULL.%p %p %d %d",
|
|
frm, dev, dev->cc, idx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pdest = frm->lpvbits + frm->cur_size;
|
|
|
|
copy_size = (pipe_info->cur_transfer_size - offset);
|
|
|
|
size = vc->pkt_size - PREFIX_SIZE;
|
|
|
|
/* sanity check on pdest */
|
|
if ((copy_size + frm->cur_size) < vc->req_image_size)
|
|
memcpy(pdest, psrc, copy_size);
|
|
|
|
frm->cur_size += copy_size;
|
|
dprintk(dev, 4, "cur_size: %lu, size: %lu\n", frm->cur_size, size);
|
|
|
|
if (frm->cur_size >= size) {
|
|
dprintk(dev, 2, "******[%d]Buffer[%d]full*******\n",
|
|
dev->cc, idx);
|
|
vc->last_frame = vc->cur_frame;
|
|
vc->cur_frame++;
|
|
/* end of system frame ring buffer, start at zero */
|
|
if ((vc->cur_frame == SYS_FRAMES) ||
|
|
(vc->cur_frame == vc->buffer.dwFrames))
|
|
vc->cur_frame = 0;
|
|
/* frame ready */
|
|
if (vb2_is_streaming(&vc->vb_vidq))
|
|
s2255_got_frame(vc, vc->jpg_size);
|
|
vc->frame_count++;
|
|
frm->ulState = S2255_READ_IDLE;
|
|
frm->cur_size = 0;
|
|
|
|
}
|
|
/* done successfully */
|
|
return 0;
|
|
}
|
|
|
|
static void s2255_read_video_callback(struct s2255_dev *dev,
|
|
struct s2255_pipeinfo *pipe_info)
|
|
{
|
|
int res;
|
|
dprintk(dev, 50, "callback read video\n");
|
|
|
|
if (dev->cc >= MAX_CHANNELS) {
|
|
dev->cc = 0;
|
|
dev_err(&dev->udev->dev, "invalid channel\n");
|
|
return;
|
|
}
|
|
/* otherwise copy to the system buffers */
|
|
res = save_frame(dev, pipe_info);
|
|
if (res != 0)
|
|
dprintk(dev, 4, "s2255: read callback failed\n");
|
|
|
|
dprintk(dev, 50, "callback read video done\n");
|
|
return;
|
|
}
|
|
|
|
static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request,
|
|
u16 Index, u16 Value, void *TransferBuffer,
|
|
s32 TransferBufferLength, int bOut)
|
|
{
|
|
int r;
|
|
unsigned char *buf;
|
|
|
|
buf = kmalloc(TransferBufferLength, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
if (!bOut) {
|
|
r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
|
|
Request,
|
|
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
|
|
USB_DIR_IN,
|
|
Value, Index, buf,
|
|
TransferBufferLength, HZ * 5);
|
|
|
|
if (r >= 0)
|
|
memcpy(TransferBuffer, buf, TransferBufferLength);
|
|
} else {
|
|
memcpy(buf, TransferBuffer, TransferBufferLength);
|
|
r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
|
|
Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
Value, Index, buf,
|
|
TransferBufferLength, HZ * 5);
|
|
}
|
|
kfree(buf);
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* retrieve FX2 firmware version. future use.
|
|
* @param dev pointer to device extension
|
|
* @return -1 for fail, else returns firmware version as an int(16 bits)
|
|
*/
|
|
static int s2255_get_fx2fw(struct s2255_dev *dev)
|
|
{
|
|
int fw;
|
|
int ret;
|
|
unsigned char transBuffer[64];
|
|
ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2,
|
|
S2255_VR_IN);
|
|
if (ret < 0)
|
|
dprintk(dev, 2, "get fw error: %x\n", ret);
|
|
fw = transBuffer[0] + (transBuffer[1] << 8);
|
|
dprintk(dev, 2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]);
|
|
return fw;
|
|
}
|
|
|
|
/*
|
|
* Create the system ring buffer to copy frames into from the
|
|
* usb read pipe.
|
|
*/
|
|
static int s2255_create_sys_buffers(struct s2255_vc *vc)
|
|
{
|
|
unsigned long i;
|
|
unsigned long reqsize;
|
|
vc->buffer.dwFrames = SYS_FRAMES;
|
|
/* always allocate maximum size(PAL) for system buffers */
|
|
reqsize = SYS_FRAMES_MAXSIZE;
|
|
|
|
if (reqsize > SYS_FRAMES_MAXSIZE)
|
|
reqsize = SYS_FRAMES_MAXSIZE;
|
|
|
|
for (i = 0; i < SYS_FRAMES; i++) {
|
|
/* allocate the frames */
|
|
vc->buffer.frame[i].lpvbits = vmalloc(reqsize);
|
|
vc->buffer.frame[i].size = reqsize;
|
|
if (vc->buffer.frame[i].lpvbits == NULL) {
|
|
pr_info("out of memory. using less frames\n");
|
|
vc->buffer.dwFrames = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* make sure internal states are set */
|
|
for (i = 0; i < SYS_FRAMES; i++) {
|
|
vc->buffer.frame[i].ulState = 0;
|
|
vc->buffer.frame[i].cur_size = 0;
|
|
}
|
|
|
|
vc->cur_frame = 0;
|
|
vc->last_frame = -1;
|
|
return 0;
|
|
}
|
|
|
|
static int s2255_release_sys_buffers(struct s2255_vc *vc)
|
|
{
|
|
unsigned long i;
|
|
for (i = 0; i < SYS_FRAMES; i++) {
|
|
vfree(vc->buffer.frame[i].lpvbits);
|
|
vc->buffer.frame[i].lpvbits = NULL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int s2255_board_init(struct s2255_dev *dev)
|
|
{
|
|
struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT;
|
|
int fw_ver;
|
|
int j;
|
|
struct s2255_pipeinfo *pipe = &dev->pipe;
|
|
dprintk(dev, 4, "board init: %p", dev);
|
|
memset(pipe, 0, sizeof(*pipe));
|
|
pipe->dev = dev;
|
|
pipe->cur_transfer_size = S2255_USB_XFER_SIZE;
|
|
pipe->max_transfer_size = S2255_USB_XFER_SIZE;
|
|
|
|
pipe->transfer_buffer = kzalloc(pipe->max_transfer_size,
|
|
GFP_KERNEL);
|
|
if (pipe->transfer_buffer == NULL) {
|
|
dprintk(dev, 1, "out of memory!\n");
|
|
return -ENOMEM;
|
|
}
|
|
/* query the firmware */
|
|
fw_ver = s2255_get_fx2fw(dev);
|
|
|
|
pr_info("s2255: usb firmware version %d.%d\n",
|
|
(fw_ver >> 8) & 0xff,
|
|
fw_ver & 0xff);
|
|
|
|
if (fw_ver < S2255_CUR_USB_FWVER)
|
|
pr_info("s2255: newer USB firmware available\n");
|
|
|
|
for (j = 0; j < MAX_CHANNELS; j++) {
|
|
struct s2255_vc *vc = &dev->vc[j];
|
|
vc->mode = mode_def;
|
|
if (dev->pid == 0x2257 && j > 1)
|
|
vc->mode.color |= (1 << 16);
|
|
vc->jpegqual = S2255_DEF_JPEG_QUAL;
|
|
vc->width = LINE_SZ_4CIFS_NTSC;
|
|
vc->height = NUM_LINES_4CIFS_NTSC * 2;
|
|
vc->std = V4L2_STD_NTSC_M;
|
|
vc->fmt = &formats[0];
|
|
vc->mode.restart = 1;
|
|
vc->req_image_size = get_transfer_size(&mode_def);
|
|
vc->frame_count = 0;
|
|
/* create the system buffers */
|
|
s2255_create_sys_buffers(vc);
|
|
}
|
|
/* start read pipe */
|
|
s2255_start_readpipe(dev);
|
|
dprintk(dev, 1, "%s: success\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int s2255_board_shutdown(struct s2255_dev *dev)
|
|
{
|
|
u32 i;
|
|
dprintk(dev, 1, "%s: dev: %p", __func__, dev);
|
|
|
|
for (i = 0; i < MAX_CHANNELS; i++) {
|
|
if (vb2_is_streaming(&dev->vc[i].vb_vidq))
|
|
s2255_stop_acquire(&dev->vc[i]);
|
|
}
|
|
s2255_stop_readpipe(dev);
|
|
for (i = 0; i < MAX_CHANNELS; i++)
|
|
s2255_release_sys_buffers(&dev->vc[i]);
|
|
/* release transfer buffer */
|
|
kfree(dev->pipe.transfer_buffer);
|
|
return 0;
|
|
}
|
|
|
|
static void read_pipe_completion(struct urb *purb)
|
|
{
|
|
struct s2255_pipeinfo *pipe_info;
|
|
struct s2255_dev *dev;
|
|
int status;
|
|
int pipe;
|
|
pipe_info = purb->context;
|
|
if (pipe_info == NULL) {
|
|
dev_err(&purb->dev->dev, "no context!\n");
|
|
return;
|
|
}
|
|
dev = pipe_info->dev;
|
|
if (dev == NULL) {
|
|
dev_err(&purb->dev->dev, "no context!\n");
|
|
return;
|
|
}
|
|
status = purb->status;
|
|
/* if shutting down, do not resubmit, exit immediately */
|
|
if (status == -ESHUTDOWN) {
|
|
dprintk(dev, 2, "%s: err shutdown\n", __func__);
|
|
pipe_info->err_count++;
|
|
return;
|
|
}
|
|
|
|
if (pipe_info->state == 0) {
|
|
dprintk(dev, 2, "%s: exiting USB pipe", __func__);
|
|
return;
|
|
}
|
|
|
|
if (status == 0)
|
|
s2255_read_video_callback(dev, pipe_info);
|
|
else {
|
|
pipe_info->err_count++;
|
|
dprintk(dev, 1, "%s: failed URB %d\n", __func__, status);
|
|
}
|
|
|
|
pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
|
|
/* reuse urb */
|
|
usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
|
|
pipe,
|
|
pipe_info->transfer_buffer,
|
|
pipe_info->cur_transfer_size,
|
|
read_pipe_completion, pipe_info);
|
|
|
|
if (pipe_info->state != 0) {
|
|
if (usb_submit_urb(pipe_info->stream_urb, GFP_ATOMIC))
|
|
dev_err(&dev->udev->dev, "error submitting urb\n");
|
|
} else {
|
|
dprintk(dev, 2, "%s :complete state 0\n", __func__);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int s2255_start_readpipe(struct s2255_dev *dev)
|
|
{
|
|
int pipe;
|
|
int retval;
|
|
struct s2255_pipeinfo *pipe_info = &dev->pipe;
|
|
pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
|
|
dprintk(dev, 2, "%s: IN %d\n", __func__, dev->read_endpoint);
|
|
pipe_info->state = 1;
|
|
pipe_info->err_count = 0;
|
|
pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!pipe_info->stream_urb)
|
|
return -ENOMEM;
|
|
/* transfer buffer allocated in board_init */
|
|
usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
|
|
pipe,
|
|
pipe_info->transfer_buffer,
|
|
pipe_info->cur_transfer_size,
|
|
read_pipe_completion, pipe_info);
|
|
retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
|
|
if (retval) {
|
|
pr_err("s2255: start read pipe failed\n");
|
|
return retval;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* starts acquisition process */
|
|
static int s2255_start_acquire(struct s2255_vc *vc)
|
|
{
|
|
int res;
|
|
unsigned long chn_rev;
|
|
int j;
|
|
struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
|
|
__le32 *buffer = dev->cmdbuf;
|
|
|
|
mutex_lock(&dev->cmdlock);
|
|
chn_rev = G_chnmap[vc->idx];
|
|
vc->last_frame = -1;
|
|
vc->bad_payload = 0;
|
|
vc->cur_frame = 0;
|
|
for (j = 0; j < SYS_FRAMES; j++) {
|
|
vc->buffer.frame[j].ulState = 0;
|
|
vc->buffer.frame[j].cur_size = 0;
|
|
}
|
|
|
|
/* send the start command */
|
|
buffer[0] = IN_DATA_TOKEN;
|
|
buffer[1] = (__le32) cpu_to_le32(chn_rev);
|
|
buffer[2] = CMD_START;
|
|
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
|
|
if (res != 0)
|
|
dev_err(&dev->udev->dev, "CMD_START error\n");
|
|
|
|
dprintk(dev, 2, "start acquire exit[%d] %d\n", vc->idx, res);
|
|
mutex_unlock(&dev->cmdlock);
|
|
return res;
|
|
}
|
|
|
|
static int s2255_stop_acquire(struct s2255_vc *vc)
|
|
{
|
|
int res;
|
|
unsigned long chn_rev;
|
|
struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
|
|
__le32 *buffer = dev->cmdbuf;
|
|
|
|
mutex_lock(&dev->cmdlock);
|
|
chn_rev = G_chnmap[vc->idx];
|
|
/* send the stop command */
|
|
buffer[0] = IN_DATA_TOKEN;
|
|
buffer[1] = (__le32) cpu_to_le32(chn_rev);
|
|
buffer[2] = CMD_STOP;
|
|
|
|
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
|
|
if (res != 0)
|
|
dev_err(&dev->udev->dev, "CMD_STOP error\n");
|
|
|
|
dprintk(dev, 4, "%s: chn %d, res %d\n", __func__, vc->idx, res);
|
|
mutex_unlock(&dev->cmdlock);
|
|
return res;
|
|
}
|
|
|
|
static void s2255_stop_readpipe(struct s2255_dev *dev)
|
|
{
|
|
struct s2255_pipeinfo *pipe = &dev->pipe;
|
|
|
|
pipe->state = 0;
|
|
if (pipe->stream_urb) {
|
|
/* cancel urb */
|
|
usb_kill_urb(pipe->stream_urb);
|
|
usb_free_urb(pipe->stream_urb);
|
|
pipe->stream_urb = NULL;
|
|
}
|
|
dprintk(dev, 4, "%s", __func__);
|
|
return;
|
|
}
|
|
|
|
static void s2255_fwload_start(struct s2255_dev *dev)
|
|
{
|
|
s2255_reset_dsppower(dev);
|
|
dev->fw_data->fw_size = dev->fw_data->fw->size;
|
|
atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED);
|
|
memcpy(dev->fw_data->pfw_data,
|
|
dev->fw_data->fw->data, CHUNK_SIZE);
|
|
dev->fw_data->fw_loaded = CHUNK_SIZE;
|
|
usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev,
|
|
usb_sndbulkpipe(dev->udev, 2),
|
|
dev->fw_data->pfw_data,
|
|
CHUNK_SIZE, s2255_fwchunk_complete,
|
|
dev->fw_data);
|
|
mod_timer(&dev->timer, jiffies + HZ);
|
|
}
|
|
|
|
/* standard usb probe function */
|
|
static int s2255_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct s2255_dev *dev = NULL;
|
|
struct usb_host_interface *iface_desc;
|
|
struct usb_endpoint_descriptor *endpoint;
|
|
int i;
|
|
int retval = -ENOMEM;
|
|
__le32 *pdata;
|
|
int fw_size;
|
|
|
|
/* allocate memory for our device state and initialize it to zero */
|
|
dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
s2255_dev_err(&interface->dev, "out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev->cmdbuf = kzalloc(S2255_CMDBUF_SIZE, GFP_KERNEL);
|
|
if (dev->cmdbuf == NULL) {
|
|
s2255_dev_err(&interface->dev, "out of memory\n");
|
|
goto errorFWDATA1;
|
|
}
|
|
|
|
atomic_set(&dev->num_channels, 0);
|
|
dev->pid = id->idProduct;
|
|
dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL);
|
|
if (!dev->fw_data)
|
|
goto errorFWDATA1;
|
|
mutex_init(&dev->lock);
|
|
mutex_init(&dev->cmdlock);
|
|
/* grab usb_device and save it */
|
|
dev->udev = usb_get_dev(interface_to_usbdev(interface));
|
|
if (dev->udev == NULL) {
|
|
dev_err(&interface->dev, "null usb device\n");
|
|
retval = -ENODEV;
|
|
goto errorUDEV;
|
|
}
|
|
dev_dbg(&interface->dev, "dev: %p, udev %p interface %p\n",
|
|
dev, dev->udev, interface);
|
|
dev->interface = interface;
|
|
/* set up the endpoint information */
|
|
iface_desc = interface->cur_altsetting;
|
|
dev_dbg(&interface->dev, "num EP: %d\n",
|
|
iface_desc->desc.bNumEndpoints);
|
|
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
|
|
endpoint = &iface_desc->endpoint[i].desc;
|
|
if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) {
|
|
/* we found the bulk in endpoint */
|
|
dev->read_endpoint = endpoint->bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
if (!dev->read_endpoint) {
|
|
dev_err(&interface->dev, "Could not find bulk-in endpoint\n");
|
|
goto errorEP;
|
|
}
|
|
timer_setup(&dev->timer, s2255_timer, 0);
|
|
init_waitqueue_head(&dev->fw_data->wait_fw);
|
|
for (i = 0; i < MAX_CHANNELS; i++) {
|
|
struct s2255_vc *vc = &dev->vc[i];
|
|
vc->idx = i;
|
|
vc->dev = dev;
|
|
init_waitqueue_head(&vc->wait_setmode);
|
|
init_waitqueue_head(&vc->wait_vidstatus);
|
|
spin_lock_init(&vc->qlock);
|
|
mutex_init(&vc->vb_lock);
|
|
}
|
|
|
|
dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->fw_data->fw_urb)
|
|
goto errorFWURB;
|
|
|
|
dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL);
|
|
if (!dev->fw_data->pfw_data) {
|
|
dev_err(&interface->dev, "out of memory!\n");
|
|
goto errorFWDATA2;
|
|
}
|
|
/* load the first chunk */
|
|
if (request_firmware(&dev->fw_data->fw,
|
|
FIRMWARE_FILE_NAME, &dev->udev->dev)) {
|
|
dev_err(&interface->dev, "sensoray 2255 failed to get firmware\n");
|
|
goto errorREQFW;
|
|
}
|
|
/* check the firmware is valid */
|
|
fw_size = dev->fw_data->fw->size;
|
|
pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8];
|
|
|
|
if (*pdata != S2255_FW_MARKER) {
|
|
dev_err(&interface->dev, "Firmware invalid.\n");
|
|
retval = -ENODEV;
|
|
goto errorFWMARKER;
|
|
} else {
|
|
/* make sure firmware is the latest */
|
|
__le32 *pRel;
|
|
pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4];
|
|
pr_info("s2255 dsp fw version %x\n", le32_to_cpu(*pRel));
|
|
dev->dsp_fw_ver = le32_to_cpu(*pRel);
|
|
if (dev->dsp_fw_ver < S2255_CUR_DSP_FWVER)
|
|
pr_info("s2255: f2255usb.bin out of date.\n");
|
|
if (dev->pid == 0x2257 &&
|
|
dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER)
|
|
pr_warn("2257 needs firmware %d or above.\n",
|
|
S2255_MIN_DSP_COLORFILTER);
|
|
}
|
|
usb_reset_device(dev->udev);
|
|
/* load 2255 board specific */
|
|
retval = s2255_board_init(dev);
|
|
if (retval)
|
|
goto errorBOARDINIT;
|
|
s2255_fwload_start(dev);
|
|
/* loads v4l specific */
|
|
retval = s2255_probe_v4l(dev);
|
|
if (retval)
|
|
goto errorBOARDINIT;
|
|
dev_info(&interface->dev, "Sensoray 2255 detected\n");
|
|
return 0;
|
|
errorBOARDINIT:
|
|
s2255_board_shutdown(dev);
|
|
errorFWMARKER:
|
|
release_firmware(dev->fw_data->fw);
|
|
errorREQFW:
|
|
kfree(dev->fw_data->pfw_data);
|
|
errorFWDATA2:
|
|
usb_free_urb(dev->fw_data->fw_urb);
|
|
errorFWURB:
|
|
del_timer_sync(&dev->timer);
|
|
errorEP:
|
|
usb_put_dev(dev->udev);
|
|
errorUDEV:
|
|
kfree(dev->fw_data);
|
|
mutex_destroy(&dev->lock);
|
|
errorFWDATA1:
|
|
kfree(dev->cmdbuf);
|
|
kfree(dev);
|
|
pr_warn("Sensoray 2255 driver load failed: 0x%x\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
/* disconnect routine. when board is removed physically or with rmmod */
|
|
static void s2255_disconnect(struct usb_interface *interface)
|
|
{
|
|
struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface));
|
|
int i;
|
|
int channels = atomic_read(&dev->num_channels);
|
|
mutex_lock(&dev->lock);
|
|
v4l2_device_disconnect(&dev->v4l2_dev);
|
|
mutex_unlock(&dev->lock);
|
|
/*see comments in the uvc_driver.c usb disconnect function */
|
|
atomic_inc(&dev->num_channels);
|
|
/* unregister each video device. */
|
|
for (i = 0; i < channels; i++)
|
|
video_unregister_device(&dev->vc[i].vdev);
|
|
/* wake up any of our timers */
|
|
atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
|
|
wake_up(&dev->fw_data->wait_fw);
|
|
for (i = 0; i < MAX_CHANNELS; i++) {
|
|
dev->vc[i].setmode_ready = 1;
|
|
wake_up(&dev->vc[i].wait_setmode);
|
|
dev->vc[i].vidstatus_ready = 1;
|
|
wake_up(&dev->vc[i].wait_vidstatus);
|
|
}
|
|
if (atomic_dec_and_test(&dev->num_channels))
|
|
s2255_destroy(dev);
|
|
dev_info(&interface->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static struct usb_driver s2255_driver = {
|
|
.name = S2255_DRIVER_NAME,
|
|
.probe = s2255_probe,
|
|
.disconnect = s2255_disconnect,
|
|
.id_table = s2255_table,
|
|
};
|
|
|
|
module_usb_driver(s2255_driver);
|
|
|
|
MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver");
|
|
MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(S2255_VERSION);
|
|
MODULE_FIRMWARE(FIRMWARE_FILE_NAME);
|