WSL2-Linux-Kernel/drivers/usb
Andy Shevchenko 4a56e413b5 usb: dwc3: pci: Switch to devm_acpi_dev_add_driver_gpios()
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assignment if ->probe() fails.

While here, add a debug message in case assignment fails to allow user
see the cause of a potential issue.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23 13:39:13 +01:00
..
atm sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h> 2017-03-02 08:42:29 +01:00
c67x00
chipidea usb: chipidea: msm: Fix return value check in ci_hdrc_msm_probe() 2017-02-03 16:48:47 +08:00
class sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
common usb: ulpi: Support device discovery via DT 2017-01-20 11:24:06 +08:00
core sched/headers: Prepare to move the memalloc_noio_*() APIs to <linux/sched/mm.h> 2017-03-02 08:42:33 +01:00
dwc2 USB: changes for v4.11 2017-01-26 15:36:28 +01:00
dwc3 usb: dwc3: pci: Switch to devm_acpi_dev_add_driver_gpios() 2017-03-23 13:39:13 +01:00
early drivers: usb: early: remove unused code 2017-02-08 07:43:47 +01:00
gadget sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
host lib/vsprintf.c: remove %Z support 2017-02-27 18:43:47 -08:00
image sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
isp1760 usb: isp1760: constify usb_gadget_ops structures 2017-01-19 10:34:45 +01:00
misc sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mon sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mtu3 usb: mtu3: remove redundant dev_err call in get_ssusb_rscs() 2017-02-09 13:34:18 +01:00
musb usb: musb: add code comment for clarification 2017-02-14 10:24:51 -08:00
phy usb: phy: ab8500: remove unused ab8500_eyediagram_workaroud() 2017-01-26 10:51:27 +02:00
renesas_usbhs usb: renesas_usbhs: Replace the deprecated extcon API 2017-01-24 11:04:14 +02:00
serial sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
storage usb: storage: sddr09: Remove a set-but-not-used variable 2017-01-25 10:52:43 +01:00
usbip Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2017-03-03 10:16:38 -08:00
wusbcore wusbcore: Fix one more crypto-on-the-stack bug 2017-01-10 17:03:42 +01:00
Kconfig
Makefile
README
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.