317 строки
8.5 KiB
C
317 строки
8.5 KiB
C
/*
|
|
* Root interrupt controller for the BCM2836 (Raspberry Pi 2).
|
|
*
|
|
* Copyright 2015 Broadcom
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/cpu.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <asm/exception.h>
|
|
|
|
#define LOCAL_CONTROL 0x000
|
|
#define LOCAL_PRESCALER 0x008
|
|
|
|
/*
|
|
* The low 2 bits identify the CPU that the GPU IRQ goes to, and the
|
|
* next 2 bits identify the CPU that the GPU FIQ goes to.
|
|
*/
|
|
#define LOCAL_GPU_ROUTING 0x00c
|
|
/* When setting bits 0-3, enables PMU interrupts on that CPU. */
|
|
#define LOCAL_PM_ROUTING_SET 0x010
|
|
/* When setting bits 0-3, disables PMU interrupts on that CPU. */
|
|
#define LOCAL_PM_ROUTING_CLR 0x014
|
|
/*
|
|
* The low 4 bits of this are the CPU's timer IRQ enables, and the
|
|
* next 4 bits are the CPU's timer FIQ enables (which override the IRQ
|
|
* bits).
|
|
*/
|
|
#define LOCAL_TIMER_INT_CONTROL0 0x040
|
|
/*
|
|
* The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
|
|
* the next 4 bits are the CPU's per-mailbox FIQ enables (which
|
|
* override the IRQ bits).
|
|
*/
|
|
#define LOCAL_MAILBOX_INT_CONTROL0 0x050
|
|
/*
|
|
* The CPU's interrupt status register. Bits are defined by the the
|
|
* LOCAL_IRQ_* bits below.
|
|
*/
|
|
#define LOCAL_IRQ_PENDING0 0x060
|
|
/* Same status bits as above, but for FIQ. */
|
|
#define LOCAL_FIQ_PENDING0 0x070
|
|
/*
|
|
* Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and
|
|
* these bits are organized by mailbox number and then CPU number. We
|
|
* use mailbox 0 for IPIs. The mailbox's interrupt is raised while
|
|
* any bit is set.
|
|
*/
|
|
#define LOCAL_MAILBOX0_SET0 0x080
|
|
#define LOCAL_MAILBOX3_SET0 0x08c
|
|
/* Mailbox write-to-clear bits. */
|
|
#define LOCAL_MAILBOX0_CLR0 0x0c0
|
|
#define LOCAL_MAILBOX3_CLR0 0x0cc
|
|
|
|
#define LOCAL_IRQ_CNTPSIRQ 0
|
|
#define LOCAL_IRQ_CNTPNSIRQ 1
|
|
#define LOCAL_IRQ_CNTHPIRQ 2
|
|
#define LOCAL_IRQ_CNTVIRQ 3
|
|
#define LOCAL_IRQ_MAILBOX0 4
|
|
#define LOCAL_IRQ_MAILBOX1 5
|
|
#define LOCAL_IRQ_MAILBOX2 6
|
|
#define LOCAL_IRQ_MAILBOX3 7
|
|
#define LOCAL_IRQ_GPU_FAST 8
|
|
#define LOCAL_IRQ_PMU_FAST 9
|
|
#define LAST_IRQ LOCAL_IRQ_PMU_FAST
|
|
|
|
struct bcm2836_arm_irqchip_intc {
|
|
struct irq_domain *domain;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static struct bcm2836_arm_irqchip_intc intc __read_mostly;
|
|
|
|
static void bcm2836_arm_irqchip_mask_per_cpu_irq(unsigned int reg_offset,
|
|
unsigned int bit,
|
|
int cpu)
|
|
{
|
|
void __iomem *reg = intc.base + reg_offset + 4 * cpu;
|
|
|
|
writel(readl(reg) & ~BIT(bit), reg);
|
|
}
|
|
|
|
static void bcm2836_arm_irqchip_unmask_per_cpu_irq(unsigned int reg_offset,
|
|
unsigned int bit,
|
|
int cpu)
|
|
{
|
|
void __iomem *reg = intc.base + reg_offset + 4 * cpu;
|
|
|
|
writel(readl(reg) | BIT(bit), reg);
|
|
}
|
|
|
|
static void bcm2836_arm_irqchip_mask_timer_irq(struct irq_data *d)
|
|
{
|
|
bcm2836_arm_irqchip_mask_per_cpu_irq(LOCAL_TIMER_INT_CONTROL0,
|
|
d->hwirq - LOCAL_IRQ_CNTPSIRQ,
|
|
smp_processor_id());
|
|
}
|
|
|
|
static void bcm2836_arm_irqchip_unmask_timer_irq(struct irq_data *d)
|
|
{
|
|
bcm2836_arm_irqchip_unmask_per_cpu_irq(LOCAL_TIMER_INT_CONTROL0,
|
|
d->hwirq - LOCAL_IRQ_CNTPSIRQ,
|
|
smp_processor_id());
|
|
}
|
|
|
|
static struct irq_chip bcm2836_arm_irqchip_timer = {
|
|
.name = "bcm2836-timer",
|
|
.irq_mask = bcm2836_arm_irqchip_mask_timer_irq,
|
|
.irq_unmask = bcm2836_arm_irqchip_unmask_timer_irq,
|
|
};
|
|
|
|
static void bcm2836_arm_irqchip_mask_pmu_irq(struct irq_data *d)
|
|
{
|
|
writel(1 << smp_processor_id(), intc.base + LOCAL_PM_ROUTING_CLR);
|
|
}
|
|
|
|
static void bcm2836_arm_irqchip_unmask_pmu_irq(struct irq_data *d)
|
|
{
|
|
writel(1 << smp_processor_id(), intc.base + LOCAL_PM_ROUTING_SET);
|
|
}
|
|
|
|
static struct irq_chip bcm2836_arm_irqchip_pmu = {
|
|
.name = "bcm2836-pmu",
|
|
.irq_mask = bcm2836_arm_irqchip_mask_pmu_irq,
|
|
.irq_unmask = bcm2836_arm_irqchip_unmask_pmu_irq,
|
|
};
|
|
|
|
static void bcm2836_arm_irqchip_mask_gpu_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void bcm2836_arm_irqchip_unmask_gpu_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip bcm2836_arm_irqchip_gpu = {
|
|
.name = "bcm2836-gpu",
|
|
.irq_mask = bcm2836_arm_irqchip_mask_gpu_irq,
|
|
.irq_unmask = bcm2836_arm_irqchip_unmask_gpu_irq,
|
|
};
|
|
|
|
static void bcm2836_arm_irqchip_register_irq(int hwirq, struct irq_chip *chip)
|
|
{
|
|
int irq = irq_create_mapping(intc.domain, hwirq);
|
|
|
|
irq_set_percpu_devid(irq);
|
|
irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq);
|
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
|
}
|
|
|
|
static void
|
|
__exception_irq_entry bcm2836_arm_irqchip_handle_irq(struct pt_regs *regs)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
u32 stat;
|
|
|
|
stat = readl_relaxed(intc.base + LOCAL_IRQ_PENDING0 + 4 * cpu);
|
|
if (stat & BIT(LOCAL_IRQ_MAILBOX0)) {
|
|
#ifdef CONFIG_SMP
|
|
void __iomem *mailbox0 = (intc.base +
|
|
LOCAL_MAILBOX0_CLR0 + 16 * cpu);
|
|
u32 mbox_val = readl(mailbox0);
|
|
u32 ipi = ffs(mbox_val) - 1;
|
|
|
|
writel(1 << ipi, mailbox0);
|
|
handle_IPI(ipi, regs);
|
|
#endif
|
|
} else if (stat) {
|
|
u32 hwirq = ffs(stat) - 1;
|
|
|
|
handle_domain_irq(intc.domain, hwirq, regs);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void bcm2836_arm_irqchip_send_ipi(const struct cpumask *mask,
|
|
unsigned int ipi)
|
|
{
|
|
int cpu;
|
|
void __iomem *mailbox0_base = intc.base + LOCAL_MAILBOX0_SET0;
|
|
|
|
/*
|
|
* Ensure that stores to normal memory are visible to the
|
|
* other CPUs before issuing the IPI.
|
|
*/
|
|
smp_wmb();
|
|
|
|
for_each_cpu(cpu, mask) {
|
|
writel(1 << ipi, mailbox0_base + 16 * cpu);
|
|
}
|
|
}
|
|
|
|
static int bcm2836_cpu_starting(unsigned int cpu)
|
|
{
|
|
bcm2836_arm_irqchip_unmask_per_cpu_irq(LOCAL_MAILBOX_INT_CONTROL0, 0,
|
|
cpu);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2836_cpu_dying(unsigned int cpu)
|
|
{
|
|
bcm2836_arm_irqchip_mask_per_cpu_irq(LOCAL_MAILBOX_INT_CONTROL0, 0,
|
|
cpu);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
|
|
struct task_struct *idle)
|
|
{
|
|
unsigned long secondary_startup_phys =
|
|
(unsigned long)virt_to_phys((void *)secondary_startup);
|
|
|
|
writel(secondary_startup_phys,
|
|
intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct smp_operations bcm2836_smp_ops __initconst = {
|
|
.smp_boot_secondary = bcm2836_smp_boot_secondary,
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
|
|
.xlate = irq_domain_xlate_onecell
|
|
};
|
|
|
|
static void
|
|
bcm2836_arm_irqchip_smp_init(void)
|
|
{
|
|
#ifdef CONFIG_SMP
|
|
/* Unmask IPIs to the boot CPU. */
|
|
cpuhp_setup_state(CPUHP_AP_IRQ_BCM2836_STARTING,
|
|
"irqchip/bcm2836:starting", bcm2836_cpu_starting,
|
|
bcm2836_cpu_dying);
|
|
|
|
set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
|
|
|
|
#ifdef CONFIG_ARM
|
|
smp_set_ops(&bcm2836_smp_ops);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* The LOCAL_IRQ_CNT* timer firings are based off of the external
|
|
* oscillator with some scaling. The firmware sets up CNTFRQ to
|
|
* report 19.2Mhz, but doesn't set up the scaling registers.
|
|
*/
|
|
static void bcm2835_init_local_timer_frequency(void)
|
|
{
|
|
/*
|
|
* Set the timer to source from the 19.2Mhz crystal clock (bit
|
|
* 8 unset), and only increment by 1 instead of 2 (bit 9
|
|
* unset).
|
|
*/
|
|
writel(0, intc.base + LOCAL_CONTROL);
|
|
|
|
/*
|
|
* Set the timer prescaler to 1:1 (timer freq = input freq *
|
|
* 2**31 / prescaler)
|
|
*/
|
|
writel(0x80000000, intc.base + LOCAL_PRESCALER);
|
|
}
|
|
|
|
static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
intc.base = of_iomap(node, 0);
|
|
if (!intc.base) {
|
|
panic("%pOF: unable to map local interrupt registers\n", node);
|
|
}
|
|
|
|
bcm2835_init_local_timer_frequency();
|
|
|
|
intc.domain = irq_domain_add_linear(node, LAST_IRQ + 1,
|
|
&bcm2836_arm_irqchip_intc_ops,
|
|
NULL);
|
|
if (!intc.domain)
|
|
panic("%pOF: unable to create IRQ domain\n", node);
|
|
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPSIRQ,
|
|
&bcm2836_arm_irqchip_timer);
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPNSIRQ,
|
|
&bcm2836_arm_irqchip_timer);
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTHPIRQ,
|
|
&bcm2836_arm_irqchip_timer);
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTVIRQ,
|
|
&bcm2836_arm_irqchip_timer);
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_GPU_FAST,
|
|
&bcm2836_arm_irqchip_gpu);
|
|
bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_PMU_FAST,
|
|
&bcm2836_arm_irqchip_pmu);
|
|
|
|
bcm2836_arm_irqchip_smp_init();
|
|
|
|
set_handle_irq(bcm2836_arm_irqchip_handle_irq);
|
|
return 0;
|
|
}
|
|
|
|
IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
|
|
bcm2836_arm_irqchip_l1_intc_of_init);
|