WSL2-Linux-Kernel/sound/oss/aci.c

712 строки
18 KiB
C

/*
* Audio Command Interface (ACI) driver (sound/aci.c)
*
* ACI is a protocol used to communicate with the microcontroller on
* some sound cards produced by miro, e.g. the miroSOUND PCM12 and
* PCM20. The ACI has been developed for miro by Norberto Pellicci
* <pellicci@home.com>. Special thanks to both him and miro for
* providing the ACI specification.
*
* The main function of the ACI is to control the mixer and to get a
* product identification. On the PCM20, ACI also controls the radio
* tuner on this card, this is supported in the Video for Linux
* miropcm20 driver.
* -
* This is a fullfeatured implementation. Unsupported features
* are bugs... (:
*
* It is not longer necessary to load the mad16 module first. The
* user is currently responsible to set the mad16 mixer correctly.
*
* To toggle the solo mode for full duplex operation just use the OSS
* record switch for the pcm ('wave') controller. Robert
* -
*
* Revision history:
*
* 1995-11-10 Markus Kuhn <mskuhn@cip.informatik.uni-erlangen.de>
* First version written.
* 1995-12-31 Markus Kuhn
* Second revision, general code cleanup.
* 1996-05-16 Hannu Savolainen
* Integrated with other parts of the driver.
* 1996-05-28 Markus Kuhn
* Initialize CS4231A mixer, make ACI first mixer,
* use new private mixer API for solo mode.
* 1998-08-18 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
* Small modification to export ACI functions and
* complete modularisation.
* 2000-06-20 Robert Siemer <Robert.Siemer@gmx.de>
* Don't initialize the CS4231A mixer anymore, so the code is
* working again, and other small changes to fit in todays
* kernels.
* 2000-08-26 Robert Siemer
* Clean up and rewrite for 2.4.x. Maybe it's SMP safe now... (:
* ioctl bugfix, and integration of solo-mode into OSS-API,
* added (OSS-limited) equalizer support, return value bugfix,
* changed param aci_reset to reset, new params: ide, wss.
* 2001-04-20 Robert Siemer
* even more cleanups...
* 2001-10-08 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* Get rid of check_region, .bss optimizations, use set_current_state
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <asm/semaphore.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "sound_config.h"
int aci_port; /* as determined by bit 4 in the OPTi 929 MC4 register */
static int aci_idcode[2]; /* manufacturer and product ID */
int aci_version; /* ACI firmware version */
EXPORT_SYMBOL(aci_port);
EXPORT_SYMBOL(aci_version);
#include "aci.h"
static int aci_solo; /* status bit of the card that can't be *
* checked with ACI versions prior to 0xb0 */
static int aci_amp; /* status bit for power-amp/line-out level
but I have no docs about what is what... */
static int aci_micpreamp=3; /* microphone preamp-level that can't be *
* checked with ACI versions prior to 0xb0 */
static int mixer_device;
static struct semaphore aci_sem;
#ifdef MODULE
static int reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset,"When set to 1, reset aci mixer.");
#else
static int reset = 1;
#endif
static int ide=-1;
module_param(ide, int, 0);
MODULE_PARM_DESC(ide,"1 enable, 0 disable ide-port - untested"
" default: do nothing");
static int wss=-1;
module_param(wss, int, 0);
MODULE_PARM_DESC(wss,"change between ACI/WSS-mixer; use 0 and 1 - untested"
" default: do nothing; for PCM1-pro only");
#ifdef DEBUG
static void print_bits(unsigned char c)
{
int j;
printk(KERN_DEBUG "aci: ");
for (j=7; j>=0; j--) {
printk("%d", (c >> j) & 0x1);
}
printk("\n");
}
#endif
/*
* This busy wait code normally requires less than 15 loops and
* practically always less than 100 loops on my i486/DX2 66 MHz.
*
* Warning: Waiting on the general status flag after reseting the MUTE
* function can take a VERY long time, because the PCM12 does some kind
* of fade-in effect. For this reason, access to the MUTE function has
* not been implemented at all.
*
* - The OSS interface has no mute option. It takes about 3 seconds to
* fade-in on my PCM20. busy_wait() handles it great now... Robert
*/
static int busy_wait(void)
{
#define MINTIME 500
long timeout;
unsigned char byte;
for (timeout = 1; timeout <= MINTIME+30; timeout++) {
if (((byte=inb(BUSY_REGISTER)) & 1) == 0) {
if (timeout >= MINTIME)
printk(KERN_DEBUG "aci: Got READYFLAG in round %ld.\n", timeout-MINTIME);
return byte;
}
if (timeout >= MINTIME) {
long out=10*HZ;
switch (timeout-MINTIME) {
case 0 ... 9:
out /= 10;
case 10 ... 19:
out /= 10;
case 20 ... 30:
out /= 10;
default:
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(out);
break;
}
}
}
printk(KERN_WARNING "aci: busy_wait() time out.\n");
return -EBUSY;
}
/* The four ACI command types are fucked up. [-:
* implied is: 1w - special case for INIT
* write is: 2w1r
* read is: x(1w1r) where x is 1 or 2 (1 CHECK_SIG, 1 CHECK_STER,
* 1 VERSION, 2 IDCODE)
* the command is only in the first write, rest is protocol overhead
*
* indexed is technically a write and used for STATUS
* and the special case for TUNE is: 3w1r
*
* Here the new general sheme: TUNE --> aci_rw_cmd(x, y, z)
* indexed and write --> aci_rw_cmd(x, y, -1)
* implied and read (x=1) --> aci_rw_cmd(x, -1, -1)
*
* Read (x>=2) is not implemented (only used during initialization).
* Use aci_idcode[2] and aci_version... Robert
*/
/* Some notes for error detection: theoretically it is possible.
* But it doubles the I/O-traffic from ww(r) to wwwrw(r) in the normal
* case and doesn't seem to be designed for that... Robert
*/
static inline int aci_rawwrite(unsigned char byte)
{
if (busy_wait() >= 0) {
#ifdef DEBUG
printk(KERN_DEBUG "aci_rawwrite(%d)\n", byte);
#endif
outb(byte, COMMAND_REGISTER);
return 0;
} else
return -EBUSY;
}
static inline int aci_rawread(void)
{
unsigned char byte;
if (busy_wait() >= 0) {
byte=inb(STATUS_REGISTER);
#ifdef DEBUG
printk(KERN_DEBUG "%d = aci_rawread()\n", byte);
#endif
return byte;
} else
return -EBUSY;
}
int aci_rw_cmd(int write1, int write2, int write3)
{
int write[] = {write1, write2, write3};
int read = -EINTR, i;
if (down_interruptible(&aci_sem))
goto out;
for (i=0; i<3; i++) {
if (write[i]< 0 || write[i] > 255)
break;
else {
read = aci_rawwrite(write[i]);
if (read < 0)
goto out_up;
}
}
read = aci_rawread();
out_up: up(&aci_sem);
out: return read;
}
EXPORT_SYMBOL(aci_rw_cmd);
static int setvolume(int __user *arg,
unsigned char left_index, unsigned char right_index)
{
int vol, ret, uservol, buf;
__get_user(uservol, arg);
/* left channel */
vol = uservol & 0xff;
if (vol > 100)
vol = 100;
vol = SCALE(100, 0x20, vol);
if ((buf=aci_write_cmd(left_index, 0x20 - vol))<0)
return buf;
ret = SCALE(0x20, 100, vol);
/* right channel */
vol = (uservol >> 8) & 0xff;
if (vol > 100)
vol = 100;
vol = SCALE(100, 0x20, vol);
if ((buf=aci_write_cmd(right_index, 0x20 - vol))<0)
return buf;
ret |= SCALE(0x20, 100, vol) << 8;
__put_user(ret, arg);
return 0;
}
static int getvolume(int __user *arg,
unsigned char left_index, unsigned char right_index)
{
int vol;
int buf;
/* left channel */
if ((buf=aci_indexed_cmd(ACI_STATUS, left_index))<0)
return buf;
vol = SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0);
/* right channel */
if ((buf=aci_indexed_cmd(ACI_STATUS, right_index))<0)
return buf;
vol |= SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0) << 8;
__put_user(vol, arg);
return 0;
}
/* The equalizer is somewhat strange on the ACI. From -12dB to +12dB
* write: 0xff..down.to..0x80==0x00..up.to..0x7f
*/
static inline unsigned int eq_oss2aci(unsigned int vol)
{
int boost=0;
unsigned int ret;
if (vol > 100)
vol = 100;
if (vol > 50) {
vol -= 51;
boost=1;
}
if (boost)
ret=SCALE(49, 0x7e, vol)+1;
else
ret=0xff - SCALE(50, 0x7f, vol);
return ret;
}
static inline unsigned int eq_aci2oss(unsigned int vol)
{
if (vol < 0x80)
return SCALE(0x7f, 50, vol) + 50;
else
return SCALE(0x7f, 50, 0xff-vol);
}
static int setequalizer(int __user *arg,
unsigned char left_index, unsigned char right_index)
{
int buf;
unsigned int vol;
__get_user(vol, arg);
/* left channel */
if ((buf=aci_write_cmd(left_index, eq_oss2aci(vol & 0xff)))<0)
return buf;
/* right channel */
if ((buf=aci_write_cmd(right_index, eq_oss2aci((vol>>8) & 0xff)))<0)
return buf;
/* the ACI equalizer is more precise */
return 0;
}
static int getequalizer(int __user *arg,
unsigned char left_index, unsigned char right_index)
{
int buf;
unsigned int vol;
/* left channel */
if ((buf=aci_indexed_cmd(ACI_STATUS, left_index))<0)
return buf;
vol = eq_aci2oss(buf);
/* right channel */
if ((buf=aci_indexed_cmd(ACI_STATUS, right_index))<0)
return buf;
vol |= eq_aci2oss(buf) << 8;
__put_user(vol, arg);
return 0;
}
static int aci_mixer_ioctl (int dev, unsigned int cmd, void __user * arg)
{
int vol, buf;
int __user *p = arg;
switch (cmd) {
case SOUND_MIXER_WRITE_VOLUME:
return setvolume(p, 0x01, 0x00);
case SOUND_MIXER_WRITE_CD:
return setvolume(p, 0x3c, 0x34);
case SOUND_MIXER_WRITE_MIC:
return setvolume(p, 0x38, 0x30);
case SOUND_MIXER_WRITE_LINE:
return setvolume(p, 0x39, 0x31);
case SOUND_MIXER_WRITE_SYNTH:
return setvolume(p, 0x3b, 0x33);
case SOUND_MIXER_WRITE_PCM:
return setvolume(p, 0x3a, 0x32);
case MIXER_WRITE(SOUND_MIXER_RADIO): /* fall through */
case SOUND_MIXER_WRITE_LINE1: /* AUX1 or radio */
return setvolume(p, 0x3d, 0x35);
case SOUND_MIXER_WRITE_LINE2: /* AUX2 */
return setvolume(p, 0x3e, 0x36);
case SOUND_MIXER_WRITE_BASS: /* set band one and two */
if (aci_idcode[1]=='C') {
if ((buf=setequalizer(p, 0x48, 0x40)) ||
(buf=setequalizer(p, 0x49, 0x41)));
return buf;
}
break;
case SOUND_MIXER_WRITE_TREBLE: /* set band six and seven */
if (aci_idcode[1]=='C') {
if ((buf=setequalizer(p, 0x4d, 0x45)) ||
(buf=setequalizer(p, 0x4e, 0x46)));
return buf;
}
break;
case SOUND_MIXER_WRITE_IGAIN: /* MIC pre-amp */
if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
__get_user(vol, p);
vol = vol & 0xff;
if (vol > 100)
vol = 100;
vol = SCALE(100, 3, vol);
if ((buf=aci_write_cmd(ACI_WRITE_IGAIN, vol))<0)
return buf;
aci_micpreamp = vol;
vol = SCALE(3, 100, vol);
vol |= (vol << 8);
__put_user(vol, p);
return 0;
}
break;
case SOUND_MIXER_WRITE_OGAIN: /* Power-amp/line-out level */
if (aci_idcode[1]=='A' || aci_idcode[1]=='B') {
__get_user(buf, p);
buf = buf & 0xff;
if (buf > 50)
vol = 1;
else
vol = 0;
if ((buf=aci_write_cmd(ACI_SET_POWERAMP, vol))<0)
return buf;
aci_amp = vol;
if (aci_amp)
buf = (100 || 100<<8);
else
buf = 0;
__put_user(buf, p);
return 0;
}
break;
case SOUND_MIXER_WRITE_RECSRC:
/* handle solo mode control */
__get_user(buf, p);
/* unset solo when RECSRC for PCM is requested */
if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
vol = !(buf & SOUND_MASK_PCM);
if ((buf=aci_write_cmd(ACI_SET_SOLOMODE, vol))<0)
return buf;
aci_solo = vol;
}
buf = (SOUND_MASK_CD| SOUND_MASK_MIC| SOUND_MASK_LINE|
SOUND_MASK_SYNTH| SOUND_MASK_LINE2);
if (aci_idcode[1] == 'C') /* PCM20 radio */
buf |= SOUND_MASK_RADIO;
else
buf |= SOUND_MASK_LINE1;
if (!aci_solo)
buf |= SOUND_MASK_PCM;
__put_user(buf, p);
return 0;
case SOUND_MIXER_READ_DEVMASK:
buf = (SOUND_MASK_VOLUME | SOUND_MASK_CD |
SOUND_MASK_MIC | SOUND_MASK_LINE |
SOUND_MASK_SYNTH | SOUND_MASK_PCM |
SOUND_MASK_LINE2);
switch (aci_idcode[1]) {
case 'C': /* PCM20 radio */
buf |= (SOUND_MASK_RADIO | SOUND_MASK_IGAIN |
SOUND_MASK_BASS | SOUND_MASK_TREBLE);
break;
case 'B': /* PCM12 */
buf |= (SOUND_MASK_LINE1 | SOUND_MASK_IGAIN |
SOUND_MASK_OGAIN);
break;
case 'A': /* PCM1-pro */
buf |= (SOUND_MASK_LINE1 | SOUND_MASK_OGAIN);
break;
default:
buf |= SOUND_MASK_LINE1;
}
__put_user(buf, p);
return 0;
case SOUND_MIXER_READ_STEREODEVS:
buf = (SOUND_MASK_VOLUME | SOUND_MASK_CD |
SOUND_MASK_MIC | SOUND_MASK_LINE |
SOUND_MASK_SYNTH | SOUND_MASK_PCM |
SOUND_MASK_LINE2);
switch (aci_idcode[1]) {
case 'C': /* PCM20 radio */
buf |= (SOUND_MASK_RADIO |
SOUND_MASK_BASS | SOUND_MASK_TREBLE);
break;
default:
buf |= SOUND_MASK_LINE1;
}
__put_user(buf, p);
return 0;
case SOUND_MIXER_READ_RECMASK:
buf = (SOUND_MASK_CD| SOUND_MASK_MIC| SOUND_MASK_LINE|
SOUND_MASK_SYNTH| SOUND_MASK_LINE2| SOUND_MASK_PCM);
if (aci_idcode[1] == 'C') /* PCM20 radio */
buf |= SOUND_MASK_RADIO;
else
buf |= SOUND_MASK_LINE1;
__put_user(buf, p);
return 0;
case SOUND_MIXER_READ_RECSRC:
buf = (SOUND_MASK_CD | SOUND_MASK_MIC | SOUND_MASK_LINE |
SOUND_MASK_SYNTH | SOUND_MASK_LINE2);
/* do we need aci_solo or can I get it from the ACI? */
switch (aci_idcode[1]) {
case 'B': /* PCM12 */
case 'C': /* PCM20 radio */
if (aci_version >= 0xb0) {
if ((vol=aci_rw_cmd(ACI_STATUS,
ACI_S_GENERAL, -1))<0)
return vol;
if (vol & 0x20)
buf |= SOUND_MASK_PCM;
}
else
if (!aci_solo)
buf |= SOUND_MASK_PCM;
break;
default:
buf |= SOUND_MASK_PCM;
}
if (aci_idcode[1] == 'C') /* PCM20 radio */
buf |= SOUND_MASK_RADIO;
else
buf |= SOUND_MASK_LINE1;
__put_user(buf, p);
return 0;
case SOUND_MIXER_READ_CAPS:
__put_user(0, p);
return 0;
case SOUND_MIXER_READ_VOLUME:
return getvolume(p, 0x04, 0x03);
case SOUND_MIXER_READ_CD:
return getvolume(p, 0x0a, 0x09);
case SOUND_MIXER_READ_MIC:
return getvolume(p, 0x06, 0x05);
case SOUND_MIXER_READ_LINE:
return getvolume(p, 0x08, 0x07);
case SOUND_MIXER_READ_SYNTH:
return getvolume(p, 0x0c, 0x0b);
case SOUND_MIXER_READ_PCM:
return getvolume(p, 0x0e, 0x0d);
case MIXER_READ(SOUND_MIXER_RADIO): /* fall through */
case SOUND_MIXER_READ_LINE1: /* AUX1 */
return getvolume(p, 0x11, 0x10);
case SOUND_MIXER_READ_LINE2: /* AUX2 */
return getvolume(p, 0x13, 0x12);
case SOUND_MIXER_READ_BASS: /* get band one */
if (aci_idcode[1]=='C') {
return getequalizer(p, 0x23, 0x22);
}
break;
case SOUND_MIXER_READ_TREBLE: /* get band seven */
if (aci_idcode[1]=='C') {
return getequalizer(p, 0x2f, 0x2e);
}
break;
case SOUND_MIXER_READ_IGAIN: /* MIC pre-amp */
if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
/* aci_micpreamp or ACI? */
if (aci_version >= 0xb0) {
if ((buf=aci_indexed_cmd(ACI_STATUS,
ACI_S_READ_IGAIN))<0)
return buf;
}
else
buf=aci_micpreamp;
vol = SCALE(3, 100, buf <= 3 ? buf : 3);
vol |= vol << 8;
__put_user(vol, p);
return 0;
}
break;
case SOUND_MIXER_READ_OGAIN:
if (aci_amp)
buf = (100 || 100<<8);
else
buf = 0;
__put_user(buf, p);
return 0;
}
return -EINVAL;
}
static struct mixer_operations aci_mixer_operations =
{
.owner = THIS_MODULE,
.id = "ACI",
.ioctl = aci_mixer_ioctl
};
/*
* There is also an internal mixer in the codec (CS4231A or AD1845),
* that deserves no purpose in an ACI based system which uses an
* external ACI controlled stereo mixer. Make sure that this codec
* mixer has the AUX1 input selected as the recording source, that the
* input gain is set near maximum and that the other channels going
* from the inputs to the codec output are muted.
*/
static int __init attach_aci(void)
{
char *boardname;
int i, rc = -EBUSY;
init_MUTEX(&aci_sem);
outb(0xE3, 0xf8f); /* Write MAD16 password */
aci_port = (inb(0xf90) & 0x10) ?
0x344: 0x354; /* Get aci_port from MC4_PORT */
if (!request_region(aci_port, 3, "sound mixer (ACI)")) {
printk(KERN_NOTICE
"aci: I/O area 0x%03x-0x%03x already used.\n",
aci_port, aci_port+2);
goto out;
}
/* force ACI into a known state */
rc = -EFAULT;
for (i=0; i<3; i++)
if (aci_rw_cmd(ACI_ERROR_OP, -1, -1)<0)
goto out_release_region;
/* official this is one aci read call: */
rc = -EFAULT;
if ((aci_idcode[0]=aci_rw_cmd(ACI_READ_IDCODE, -1, -1))<0 ||
(aci_idcode[1]=aci_rw_cmd(ACI_READ_IDCODE, -1, -1))<0) {
printk(KERN_ERR "aci: Failed to read idcode on 0x%03x.\n",
aci_port);
goto out_release_region;
}
if ((aci_version=aci_rw_cmd(ACI_READ_VERSION, -1, -1))<0) {
printk(KERN_ERR "aci: Failed to read version on 0x%03x.\n",
aci_port);
goto out_release_region;
}
if (aci_idcode[0] == 'm') {
/* It looks like a miro sound card. */
switch (aci_idcode[1]) {
case 'A':
boardname = "PCM1 pro / early PCM12";
break;
case 'B':
boardname = "PCM12";
break;
case 'C':
boardname = "PCM20 radio";
break;
default:
boardname = "unknown miro";
}
} else {
printk(KERN_WARNING "aci: Warning: unsupported card! - "
"no hardware, no specs...\n");
boardname = "unknown Cardinal Technologies";
}
printk(KERN_INFO "<ACI 0x%02x, id %02x/%02x \"%c/%c\", (%s)> at 0x%03x\n",
aci_version,
aci_idcode[0], aci_idcode[1],
aci_idcode[0], aci_idcode[1],
boardname, aci_port);
rc = -EBUSY;
if (reset) {
/* first write()s after reset fail with my PCM20 */
if (aci_rw_cmd(ACI_INIT, -1, -1)<0 ||
aci_rw_cmd(ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP)<0 ||
aci_rw_cmd(ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP)<0)
goto out_release_region;
}
/* the PCM20 is muted after reset (and reboot) */
if (aci_rw_cmd(ACI_SET_MUTE, 0x00, -1)<0)
goto out_release_region;
if (ide>=0)
if (aci_rw_cmd(ACI_SET_IDE, !ide, -1)<0)
goto out_release_region;
if (wss>=0 && aci_idcode[1]=='A')
if (aci_rw_cmd(ACI_SET_WSS, !!wss, -1)<0)
goto out_release_region;
mixer_device = sound_install_mixer(MIXER_DRIVER_VERSION, boardname,
&aci_mixer_operations,
sizeof(aci_mixer_operations), NULL);
rc = 0;
if (mixer_device < 0) {
printk(KERN_ERR "aci: Failed to install mixer.\n");
rc = mixer_device;
goto out_release_region;
} /* else Maybe initialize the CS4231A mixer here... */
out: return rc;
out_release_region:
release_region(aci_port, 3);
goto out;
}
static void __exit unload_aci(void)
{
sound_unload_mixerdev(mixer_device);
release_region(aci_port, 3);
}
module_init(attach_aci);
module_exit(unload_aci);
MODULE_LICENSE("GPL");