390 строки
14 KiB
Plaintext
390 строки
14 KiB
Plaintext
This is a small guide for those who want to write kernel drivers for I2C
|
|
or SMBus devices, using Linux as the protocol host/master (not slave).
|
|
|
|
To set up a driver, you need to do several things. Some are optional, and
|
|
some things can be done slightly or completely different. Use this as a
|
|
guide, not as a rule book!
|
|
|
|
|
|
General remarks
|
|
===============
|
|
|
|
Try to keep the kernel namespace as clean as possible. The best way to
|
|
do this is to use a unique prefix for all global symbols. This is
|
|
especially important for exported symbols, but it is a good idea to do
|
|
it for non-exported symbols too. We will use the prefix `foo_' in this
|
|
tutorial.
|
|
|
|
|
|
The driver structure
|
|
====================
|
|
|
|
Usually, you will implement a single driver structure, and instantiate
|
|
all clients from it. Remember, a driver structure contains general access
|
|
routines, and should be zero-initialized except for fields with data you
|
|
provide. A client structure holds device-specific information like the
|
|
driver model device node, and its I2C address.
|
|
|
|
static struct i2c_device_id foo_idtable[] = {
|
|
{ "foo", my_id_for_foo },
|
|
{ "bar", my_id_for_bar },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, foo_idtable);
|
|
|
|
static struct i2c_driver foo_driver = {
|
|
.driver = {
|
|
.name = "foo",
|
|
},
|
|
|
|
.id_table = foo_ids,
|
|
.probe = foo_probe,
|
|
.remove = foo_remove,
|
|
/* if device autodetection is needed: */
|
|
.class = I2C_CLASS_SOMETHING,
|
|
.detect = foo_detect,
|
|
.address_data = &addr_data,
|
|
|
|
.shutdown = foo_shutdown, /* optional */
|
|
.suspend = foo_suspend, /* optional */
|
|
.resume = foo_resume, /* optional */
|
|
.command = foo_command, /* optional, deprecated */
|
|
}
|
|
|
|
The name field is the driver name, and must not contain spaces. It
|
|
should match the module name (if the driver can be compiled as a module),
|
|
although you can use MODULE_ALIAS (passing "foo" in this example) to add
|
|
another name for the module. If the driver name doesn't match the module
|
|
name, the module won't be automatically loaded (hotplug/coldplug).
|
|
|
|
All other fields are for call-back functions which will be explained
|
|
below.
|
|
|
|
|
|
Extra client data
|
|
=================
|
|
|
|
Each client structure has a special `data' field that can point to any
|
|
structure at all. You should use this to keep device-specific data.
|
|
|
|
/* store the value */
|
|
void i2c_set_clientdata(struct i2c_client *client, void *data);
|
|
|
|
/* retrieve the value */
|
|
void *i2c_get_clientdata(const struct i2c_client *client);
|
|
|
|
|
|
Accessing the client
|
|
====================
|
|
|
|
Let's say we have a valid client structure. At some time, we will need
|
|
to gather information from the client, or write new information to the
|
|
client.
|
|
|
|
I have found it useful to define foo_read and foo_write functions for this.
|
|
For some cases, it will be easier to call the i2c functions directly,
|
|
but many chips have some kind of register-value idea that can easily
|
|
be encapsulated.
|
|
|
|
The below functions are simple examples, and should not be copied
|
|
literally.
|
|
|
|
int foo_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
if (reg < 0x10) /* byte-sized register */
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
else /* word-sized register */
|
|
return i2c_smbus_read_word_data(client, reg);
|
|
}
|
|
|
|
int foo_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
{
|
|
if (reg == 0x10) /* Impossible to write - driver error! */
|
|
return -EINVAL;
|
|
else if (reg < 0x10) /* byte-sized register */
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
else /* word-sized register */
|
|
return i2c_smbus_write_word_data(client, reg, value);
|
|
}
|
|
|
|
|
|
Probing and attaching
|
|
=====================
|
|
|
|
The Linux I2C stack was originally written to support access to hardware
|
|
monitoring chips on PC motherboards, and thus used to embed some assumptions
|
|
that were more appropriate to SMBus (and PCs) than to I2C. One of these
|
|
assumptions was that most adapters and devices drivers support the SMBUS_QUICK
|
|
protocol to probe device presence. Another was that devices and their drivers
|
|
can be sufficiently configured using only such probe primitives.
|
|
|
|
As Linux and its I2C stack became more widely used in embedded systems
|
|
and complex components such as DVB adapters, those assumptions became more
|
|
problematic. Drivers for I2C devices that issue interrupts need more (and
|
|
different) configuration information, as do drivers handling chip variants
|
|
that can't be distinguished by protocol probing, or which need some board
|
|
specific information to operate correctly.
|
|
|
|
Accordingly, the I2C stack now has two models for associating I2C devices
|
|
with their drivers: the original "legacy" model, and a newer one that's
|
|
fully compatible with the Linux 2.6 driver model. These models do not mix,
|
|
since the "legacy" model requires drivers to create "i2c_client" device
|
|
objects after SMBus style probing, while the Linux driver model expects
|
|
drivers to be given such device objects in their probe() routines.
|
|
|
|
The legacy model is deprecated now and will soon be removed, so we no
|
|
longer document it here.
|
|
|
|
|
|
Standard Driver Model Binding ("New Style")
|
|
-------------------------------------------
|
|
|
|
System infrastructure, typically board-specific initialization code or
|
|
boot firmware, reports what I2C devices exist. For example, there may be
|
|
a table, in the kernel or from the boot loader, identifying I2C devices
|
|
and linking them to board-specific configuration information about IRQs
|
|
and other wiring artifacts, chip type, and so on. That could be used to
|
|
create i2c_client objects for each I2C device.
|
|
|
|
I2C device drivers using this binding model work just like any other
|
|
kind of driver in Linux: they provide a probe() method to bind to
|
|
those devices, and a remove() method to unbind.
|
|
|
|
static int foo_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int foo_remove(struct i2c_client *client);
|
|
|
|
Remember that the i2c_driver does not create those client handles. The
|
|
handle may be used during foo_probe(). If foo_probe() reports success
|
|
(zero not a negative status code) it may save the handle and use it until
|
|
foo_remove() returns. That binding model is used by most Linux drivers.
|
|
|
|
The probe function is called when an entry in the id_table name field
|
|
matches the device's name. It is passed the entry that was matched so
|
|
the driver knows which one in the table matched.
|
|
|
|
|
|
Device Creation
|
|
---------------
|
|
|
|
If you know for a fact that an I2C device is connected to a given I2C bus,
|
|
you can instantiate that device by simply filling an i2c_board_info
|
|
structure with the device address and driver name, and calling
|
|
i2c_new_device(). This will create the device, then the driver core will
|
|
take care of finding the right driver and will call its probe() method.
|
|
If a driver supports different device types, you can specify the type you
|
|
want using the type field. You can also specify an IRQ and platform data
|
|
if needed.
|
|
|
|
Sometimes you know that a device is connected to a given I2C bus, but you
|
|
don't know the exact address it uses. This happens on TV adapters for
|
|
example, where the same driver supports dozens of slightly different
|
|
models, and I2C device addresses change from one model to the next. In
|
|
that case, you can use the i2c_new_probed_device() variant, which is
|
|
similar to i2c_new_device(), except that it takes an additional list of
|
|
possible I2C addresses to probe. A device is created for the first
|
|
responsive address in the list. If you expect more than one device to be
|
|
present in the address range, simply call i2c_new_probed_device() that
|
|
many times.
|
|
|
|
The call to i2c_new_device() or i2c_new_probed_device() typically happens
|
|
in the I2C bus driver. You may want to save the returned i2c_client
|
|
reference for later use.
|
|
|
|
|
|
Device Detection
|
|
----------------
|
|
|
|
Sometimes you do not know in advance which I2C devices are connected to
|
|
a given I2C bus. This is for example the case of hardware monitoring
|
|
devices on a PC's SMBus. In that case, you may want to let your driver
|
|
detect supported devices automatically. This is how the legacy model
|
|
was working, and is now available as an extension to the standard
|
|
driver model (so that we can finally get rid of the legacy model.)
|
|
|
|
You simply have to define a detect callback which will attempt to
|
|
identify supported devices (returning 0 for supported ones and -ENODEV
|
|
for unsupported ones), a list of addresses to probe, and a device type
|
|
(or class) so that only I2C buses which may have that type of device
|
|
connected (and not otherwise enumerated) will be probed. The i2c
|
|
core will then call you back as needed and will instantiate a device
|
|
for you for every successful detection.
|
|
|
|
Note that this mechanism is purely optional and not suitable for all
|
|
devices. You need some reliable way to identify the supported devices
|
|
(typically using device-specific, dedicated identification registers),
|
|
otherwise misdetections are likely to occur and things can get wrong
|
|
quickly.
|
|
|
|
|
|
Device Deletion
|
|
---------------
|
|
|
|
Each I2C device which has been created using i2c_new_device() or
|
|
i2c_new_probed_device() can be unregistered by calling
|
|
i2c_unregister_device(). If you don't call it explicitly, it will be
|
|
called automatically before the underlying I2C bus itself is removed, as a
|
|
device can't survive its parent in the device driver model.
|
|
|
|
|
|
Initializing the driver
|
|
=======================
|
|
|
|
When the kernel is booted, or when your foo driver module is inserted,
|
|
you have to do some initializing. Fortunately, just registering the
|
|
driver module is usually enough.
|
|
|
|
static int __init foo_init(void)
|
|
{
|
|
return i2c_add_driver(&foo_driver);
|
|
}
|
|
|
|
static void __exit foo_cleanup(void)
|
|
{
|
|
i2c_del_driver(&foo_driver);
|
|
}
|
|
|
|
/* Substitute your own name and email address */
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"
|
|
MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices");
|
|
|
|
/* a few non-GPL license types are also allowed */
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(foo_init);
|
|
module_exit(foo_cleanup);
|
|
|
|
Note that some functions are marked by `__init'. These functions can
|
|
be removed after kernel booting (or module loading) is completed.
|
|
Likewise, functions marked by `__exit' are dropped by the compiler when
|
|
the code is built into the kernel, as they would never be called.
|
|
|
|
|
|
Power Management
|
|
================
|
|
|
|
If your I2C device needs special handling when entering a system low
|
|
power state -- like putting a transceiver into a low power mode, or
|
|
activating a system wakeup mechanism -- do that in the suspend() method.
|
|
The resume() method should reverse what the suspend() method does.
|
|
|
|
These are standard driver model calls, and they work just like they
|
|
would for any other driver stack. The calls can sleep, and can use
|
|
I2C messaging to the device being suspended or resumed (since their
|
|
parent I2C adapter is active when these calls are issued, and IRQs
|
|
are still enabled).
|
|
|
|
|
|
System Shutdown
|
|
===============
|
|
|
|
If your I2C device needs special handling when the system shuts down
|
|
or reboots (including kexec) -- like turning something off -- use a
|
|
shutdown() method.
|
|
|
|
Again, this is a standard driver model call, working just like it
|
|
would for any other driver stack: the calls can sleep, and can use
|
|
I2C messaging.
|
|
|
|
|
|
Command function
|
|
================
|
|
|
|
A generic ioctl-like function call back is supported. You will seldom
|
|
need this, and its use is deprecated anyway, so newer design should not
|
|
use it.
|
|
|
|
|
|
Sending and receiving
|
|
=====================
|
|
|
|
If you want to communicate with your device, there are several functions
|
|
to do this. You can find all of them in <linux/i2c.h>.
|
|
|
|
If you can choose between plain I2C communication and SMBus level
|
|
communication, please use the latter. All adapters understand SMBus level
|
|
commands, but only some of them understand plain I2C!
|
|
|
|
|
|
Plain I2C communication
|
|
-----------------------
|
|
|
|
int i2c_master_send(struct i2c_client *client, const char *buf,
|
|
int count);
|
|
int i2c_master_recv(struct i2c_client *client, char *buf, int count);
|
|
|
|
These routines read and write some bytes from/to a client. The client
|
|
contains the i2c address, so you do not have to include it. The second
|
|
parameter contains the bytes to read/write, the third the number of bytes
|
|
to read/write (must be less than the length of the buffer.) Returned is
|
|
the actual number of bytes read/written.
|
|
|
|
int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
|
int num);
|
|
|
|
This sends a series of messages. Each message can be a read or write,
|
|
and they can be mixed in any way. The transactions are combined: no
|
|
stop bit is sent between transaction. The i2c_msg structure contains
|
|
for each message the client address, the number of bytes of the message
|
|
and the message data itself.
|
|
|
|
You can read the file `i2c-protocol' for more information about the
|
|
actual I2C protocol.
|
|
|
|
|
|
SMBus communication
|
|
-------------------
|
|
|
|
s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
|
|
unsigned short flags, char read_write, u8 command,
|
|
int size, union i2c_smbus_data *data);
|
|
|
|
This is the generic SMBus function. All functions below are implemented
|
|
in terms of it. Never use this function directly!
|
|
|
|
s32 i2c_smbus_read_byte(struct i2c_client *client);
|
|
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
|
|
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
|
|
s32 i2c_smbus_write_byte_data(struct i2c_client *client,
|
|
u8 command, u8 value);
|
|
s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
|
|
s32 i2c_smbus_write_word_data(struct i2c_client *client,
|
|
u8 command, u16 value);
|
|
s32 i2c_smbus_process_call(struct i2c_client *client,
|
|
u8 command, u16 value);
|
|
s32 i2c_smbus_read_block_data(struct i2c_client *client,
|
|
u8 command, u8 *values);
|
|
s32 i2c_smbus_write_block_data(struct i2c_client *client,
|
|
u8 command, u8 length, const u8 *values);
|
|
s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
|
|
u8 command, u8 length, u8 *values);
|
|
s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
|
|
u8 command, u8 length,
|
|
const u8 *values);
|
|
|
|
These ones were removed from i2c-core because they had no users, but could
|
|
be added back later if needed:
|
|
|
|
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value);
|
|
s32 i2c_smbus_block_process_call(struct i2c_client *client,
|
|
u8 command, u8 length, u8 *values);
|
|
|
|
All these transactions return a negative errno value on failure. The 'write'
|
|
transactions return 0 on success; the 'read' transactions return the read
|
|
value, except for block transactions, which return the number of values
|
|
read. The block buffers need not be longer than 32 bytes.
|
|
|
|
You can read the file `smbus-protocol' for more information about the
|
|
actual SMBus protocol.
|
|
|
|
|
|
General purpose routines
|
|
========================
|
|
|
|
Below all general purpose routines are listed, that were not mentioned
|
|
before.
|
|
|
|
/* Return the adapter number for a specific adapter */
|
|
int i2c_adapter_id(struct i2c_adapter *adap);
|