428 строки
9.9 KiB
C
428 строки
9.9 KiB
C
/*
|
|
* Driver for Ntrig/Microsoft Touchscreens over SPI
|
|
*
|
|
* Copyright (c) 2016 Red Hat Inc.
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#define SURFACE3_PACKET_SIZE 264
|
|
|
|
#define SURFACE3_REPORT_TOUCH 0xd2
|
|
#define SURFACE3_REPORT_PEN 0x16
|
|
|
|
struct surface3_ts_data {
|
|
struct spi_device *spi;
|
|
struct gpio_desc *gpiod_rst[2];
|
|
struct input_dev *input_dev;
|
|
struct input_dev *pen_input_dev;
|
|
int pen_tool;
|
|
|
|
u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned;
|
|
};
|
|
|
|
struct surface3_ts_data_finger {
|
|
u8 status;
|
|
__le16 tracking_id;
|
|
__le16 x;
|
|
__le16 cx;
|
|
__le16 y;
|
|
__le16 cy;
|
|
__le16 width;
|
|
__le16 height;
|
|
u32 padding;
|
|
} __packed;
|
|
|
|
struct surface3_ts_data_pen {
|
|
u8 status;
|
|
__le16 x;
|
|
__le16 y;
|
|
__le16 pressure;
|
|
u8 padding;
|
|
} __packed;
|
|
|
|
static int surface3_spi_read(struct surface3_ts_data *ts_data)
|
|
{
|
|
struct spi_device *spi = ts_data->spi;
|
|
|
|
memset(ts_data->rd_buf, 0, sizeof(ts_data->rd_buf));
|
|
return spi_read(spi, ts_data->rd_buf, sizeof(ts_data->rd_buf));
|
|
}
|
|
|
|
static void surface3_spi_report_touch(struct surface3_ts_data *ts_data,
|
|
struct surface3_ts_data_finger *finger)
|
|
{
|
|
int st = finger->status & 0x01;
|
|
int slot;
|
|
|
|
slot = input_mt_get_slot_by_key(ts_data->input_dev,
|
|
get_unaligned_le16(&finger->tracking_id));
|
|
if (slot < 0)
|
|
return;
|
|
|
|
input_mt_slot(ts_data->input_dev, slot);
|
|
input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st);
|
|
if (st) {
|
|
input_report_abs(ts_data->input_dev,
|
|
ABS_MT_POSITION_X,
|
|
get_unaligned_le16(&finger->x));
|
|
input_report_abs(ts_data->input_dev,
|
|
ABS_MT_POSITION_Y,
|
|
get_unaligned_le16(&finger->y));
|
|
input_report_abs(ts_data->input_dev,
|
|
ABS_MT_WIDTH_MAJOR,
|
|
get_unaligned_le16(&finger->width));
|
|
input_report_abs(ts_data->input_dev,
|
|
ABS_MT_WIDTH_MINOR,
|
|
get_unaligned_le16(&finger->height));
|
|
}
|
|
}
|
|
|
|
static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *data)
|
|
{
|
|
u16 timestamp;
|
|
unsigned int i;
|
|
timestamp = get_unaligned_le16(&data[15]);
|
|
|
|
for (i = 0; i < 13; i++) {
|
|
struct surface3_ts_data_finger *finger;
|
|
|
|
finger = (struct surface3_ts_data_finger *)&data[17 +
|
|
i * sizeof(struct surface3_ts_data_finger)];
|
|
|
|
/*
|
|
* When bit 5 of status is 1, it marks the end of the report:
|
|
* - touch present: 0xe7
|
|
* - touch released: 0xe4
|
|
* - nothing valuable: 0xff
|
|
*/
|
|
if (finger->status & 0x10)
|
|
break;
|
|
|
|
surface3_spi_report_touch(ts_data, finger);
|
|
}
|
|
|
|
input_mt_sync_frame(ts_data->input_dev);
|
|
input_sync(ts_data->input_dev);
|
|
}
|
|
|
|
static void surface3_spi_report_pen(struct surface3_ts_data *ts_data,
|
|
struct surface3_ts_data_pen *pen)
|
|
{
|
|
struct input_dev *dev = ts_data->pen_input_dev;
|
|
int st = pen->status;
|
|
int prox = st & 0x01;
|
|
int rubber = st & 0x18;
|
|
int tool = (prox && rubber) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
|
|
/* fake proximity out to switch tools */
|
|
if (ts_data->pen_tool != tool) {
|
|
input_report_key(dev, ts_data->pen_tool, 0);
|
|
input_sync(dev);
|
|
ts_data->pen_tool = tool;
|
|
}
|
|
|
|
input_report_key(dev, BTN_TOUCH, st & 0x12);
|
|
|
|
input_report_key(dev, ts_data->pen_tool, prox);
|
|
|
|
if (st) {
|
|
input_report_key(dev,
|
|
BTN_STYLUS,
|
|
st & 0x04);
|
|
|
|
input_report_abs(dev,
|
|
ABS_X,
|
|
get_unaligned_le16(&pen->x));
|
|
input_report_abs(dev,
|
|
ABS_Y,
|
|
get_unaligned_le16(&pen->y));
|
|
input_report_abs(dev,
|
|
ABS_PRESSURE,
|
|
get_unaligned_le16(&pen->pressure));
|
|
}
|
|
}
|
|
|
|
static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data)
|
|
{
|
|
struct surface3_ts_data_pen *pen;
|
|
|
|
pen = (struct surface3_ts_data_pen *)&data[15];
|
|
|
|
surface3_spi_report_pen(ts_data, pen);
|
|
input_sync(ts_data->pen_input_dev);
|
|
}
|
|
|
|
static void surface3_spi_process(struct surface3_ts_data *ts_data)
|
|
{
|
|
static const char header[] = {
|
|
0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01
|
|
};
|
|
u8 *data = ts_data->rd_buf;
|
|
|
|
if (memcmp(header, data, sizeof(header)))
|
|
dev_err(&ts_data->spi->dev,
|
|
"%s header error: %*ph, ignoring...\n",
|
|
__func__, (int)sizeof(header), data);
|
|
|
|
switch (data[9]) {
|
|
case SURFACE3_REPORT_TOUCH:
|
|
surface3_spi_process_touch(ts_data, data);
|
|
break;
|
|
case SURFACE3_REPORT_PEN:
|
|
surface3_spi_process_pen(ts_data, data);
|
|
break;
|
|
default:
|
|
dev_err(&ts_data->spi->dev,
|
|
"%s unknown packet type: %x, ignoring...\n",
|
|
__func__, data[9]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct surface3_ts_data *data = dev_id;
|
|
|
|
if (surface3_spi_read(data))
|
|
return IRQ_HANDLED;
|
|
|
|
dev_dbg(&data->spi->dev, "%s received -> %*ph\n",
|
|
__func__, SURFACE3_PACKET_SIZE, data->rd_buf);
|
|
surface3_spi_process(data);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void surface3_spi_power(struct surface3_ts_data *data, bool on)
|
|
{
|
|
gpiod_set_value(data->gpiod_rst[0], on);
|
|
gpiod_set_value(data->gpiod_rst[1], on);
|
|
/* let the device settle a little */
|
|
msleep(20);
|
|
}
|
|
|
|
/**
|
|
* surface3_spi_get_gpio_config - Get GPIO config from ACPI/DT
|
|
*
|
|
* @ts: surface3_spi_ts_data pointer
|
|
*/
|
|
static int surface3_spi_get_gpio_config(struct surface3_ts_data *data)
|
|
{
|
|
int error;
|
|
struct device *dev;
|
|
struct gpio_desc *gpiod;
|
|
int i;
|
|
|
|
dev = &data->spi->dev;
|
|
|
|
/* Get the reset lines GPIO pin number */
|
|
for (i = 0; i < 2; i++) {
|
|
gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_OUT_LOW);
|
|
if (IS_ERR(gpiod)) {
|
|
error = PTR_ERR(gpiod);
|
|
if (error != -EPROBE_DEFER)
|
|
dev_err(dev,
|
|
"Failed to get power GPIO %d: %d\n",
|
|
i,
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
data->gpiod_rst[i] = gpiod;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int surface3_spi_create_touch_input(struct surface3_ts_data *data)
|
|
{
|
|
struct input_dev *input;
|
|
int error;
|
|
|
|
input = devm_input_allocate_device(&data->spi->dev);
|
|
if (!input)
|
|
return -ENOMEM;
|
|
|
|
data->input_dev = input;
|
|
|
|
input_set_abs_params(input, ABS_MT_POSITION_X, 0, 9600, 0, 0);
|
|
input_abs_set_res(input, ABS_MT_POSITION_X, 40);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 7200, 0, 0);
|
|
input_abs_set_res(input, ABS_MT_POSITION_Y, 48);
|
|
input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 1024, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 1024, 0, 0);
|
|
input_mt_init_slots(input, 10, INPUT_MT_DIRECT);
|
|
|
|
input->name = "Surface3 SPI Capacitive TouchScreen";
|
|
input->phys = "input/ts";
|
|
input->id.bustype = BUS_SPI;
|
|
input->id.vendor = 0x045e; /* Microsoft */
|
|
input->id.product = 0x0001;
|
|
input->id.version = 0x0000;
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(&data->spi->dev,
|
|
"Failed to register input device: %d", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int surface3_spi_create_pen_input(struct surface3_ts_data *data)
|
|
{
|
|
struct input_dev *input;
|
|
int error;
|
|
|
|
input = devm_input_allocate_device(&data->spi->dev);
|
|
if (!input)
|
|
return -ENOMEM;
|
|
|
|
data->pen_input_dev = input;
|
|
data->pen_tool = BTN_TOOL_PEN;
|
|
|
|
__set_bit(INPUT_PROP_DIRECT, input->propbit);
|
|
__set_bit(INPUT_PROP_POINTER, input->propbit);
|
|
input_set_abs_params(input, ABS_X, 0, 9600, 0, 0);
|
|
input_abs_set_res(input, ABS_X, 40);
|
|
input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0);
|
|
input_abs_set_res(input, ABS_Y, 48);
|
|
input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0);
|
|
input_set_capability(input, EV_KEY, BTN_TOUCH);
|
|
input_set_capability(input, EV_KEY, BTN_STYLUS);
|
|
input_set_capability(input, EV_KEY, BTN_TOOL_PEN);
|
|
input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER);
|
|
|
|
input->name = "Surface3 SPI Pen Input";
|
|
input->phys = "input/ts";
|
|
input->id.bustype = BUS_SPI;
|
|
input->id.vendor = 0x045e; /* Microsoft */
|
|
input->id.product = 0x0002;
|
|
input->id.version = 0x0000;
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(&data->spi->dev,
|
|
"Failed to register input device: %d", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int surface3_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct surface3_ts_data *data;
|
|
int error;
|
|
|
|
/* Set up SPI*/
|
|
spi->bits_per_word = 8;
|
|
spi->mode = SPI_MODE_0;
|
|
error = spi_setup(spi);
|
|
if (error)
|
|
return error;
|
|
|
|
data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->spi = spi;
|
|
spi_set_drvdata(spi, data);
|
|
|
|
error = surface3_spi_get_gpio_config(data);
|
|
if (error)
|
|
return error;
|
|
|
|
surface3_spi_power(data, true);
|
|
surface3_spi_power(data, false);
|
|
surface3_spi_power(data, true);
|
|
|
|
error = surface3_spi_create_touch_input(data);
|
|
if (error)
|
|
return error;
|
|
|
|
error = surface3_spi_create_pen_input(data);
|
|
if (error)
|
|
return error;
|
|
|
|
error = devm_request_threaded_irq(&spi->dev, spi->irq,
|
|
NULL, surface3_spi_irq_handler,
|
|
IRQF_ONESHOT,
|
|
"Surface3-irq", data);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused surface3_spi_suspend(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct surface3_ts_data *data = spi_get_drvdata(spi);
|
|
|
|
disable_irq(data->spi->irq);
|
|
|
|
surface3_spi_power(data, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused surface3_spi_resume(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct surface3_ts_data *data = spi_get_drvdata(spi);
|
|
|
|
surface3_spi_power(data, true);
|
|
|
|
enable_irq(data->spi->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(surface3_spi_pm_ops,
|
|
surface3_spi_suspend,
|
|
surface3_spi_resume);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id surface3_spi_acpi_match[] = {
|
|
{ "MSHW0037", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, surface3_spi_acpi_match);
|
|
#endif
|
|
|
|
static struct spi_driver surface3_spi_driver = {
|
|
.driver = {
|
|
.name = "Surface3-spi",
|
|
.acpi_match_table = ACPI_PTR(surface3_spi_acpi_match),
|
|
.pm = &surface3_spi_pm_ops,
|
|
},
|
|
.probe = surface3_spi_probe,
|
|
};
|
|
|
|
module_spi_driver(surface3_spi_driver);
|
|
|
|
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
|
|
MODULE_DESCRIPTION("Surface 3 SPI touchscreen driver");
|
|
MODULE_LICENSE("GPL v2");
|