625 строки
15 KiB
C
625 строки
15 KiB
C
/*
|
|
* MPC8272_ads setup and early boot code plus other random bits.
|
|
*
|
|
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
|
|
* m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
|
|
*
|
|
* Copyright (c) 2006 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/fs_uart_pd.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/mpc8260.h>
|
|
#include <asm/irq.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/cpm2.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/i8259.h>
|
|
#include <linux/fs_enet_pd.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/cpm2_pic.h>
|
|
|
|
#include "pq2ads.h"
|
|
|
|
#ifdef CONFIG_PCI
|
|
static uint pci_clk_frq;
|
|
static struct {
|
|
unsigned long *pci_int_stat_reg;
|
|
unsigned long *pci_int_mask_reg;
|
|
} pci_regs;
|
|
|
|
static unsigned long pci_int_base;
|
|
static struct irq_host *pci_pic_host;
|
|
#endif
|
|
|
|
static void __init mpc8272_ads_pic_init(void)
|
|
{
|
|
struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
|
|
struct resource r;
|
|
cpm2_map_t *cpm_reg;
|
|
|
|
if (np == NULL) {
|
|
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
|
|
return;
|
|
}
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_ERR "PIC init: invalid resource\n");
|
|
of_node_put(np);
|
|
return;
|
|
}
|
|
cpm2_pic_init(np);
|
|
of_node_put(np);
|
|
|
|
/* Initialize the default interrupt mapping priorities,
|
|
* in case the boot rom changed something on us.
|
|
*/
|
|
cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
cpm_reg->im_intctl.ic_siprr = 0x05309770;
|
|
iounmap(cpm_reg);
|
|
#ifdef CONFIG_PCI
|
|
/* Initialize stuff for the 82xx CPLD IC and install demux */
|
|
m82xx_pci_init_irq();
|
|
#endif
|
|
}
|
|
|
|
static void init_fcc1_ioports(struct fs_platform_info *fpi)
|
|
{
|
|
struct io_port *io;
|
|
u32 tempval;
|
|
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
struct device_node *np;
|
|
struct resource r;
|
|
u32 *bcsr;
|
|
|
|
np = of_find_node_by_type(NULL, "memory");
|
|
if (!np) {
|
|
printk(KERN_INFO "No memory node in device tree\n");
|
|
return;
|
|
}
|
|
if (of_address_to_resource(np, 1, &r)) {
|
|
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
|
|
return;
|
|
}
|
|
of_node_put(np);
|
|
bcsr = ioremap(r.start + 4, sizeof(u32));
|
|
io = &immap->im_ioport;
|
|
|
|
/* Enable the PHY */
|
|
clrbits32(bcsr, BCSR1_FETHIEN);
|
|
setbits32(bcsr, BCSR1_FETH_RST);
|
|
|
|
/* FCC1 pins are on port A/C. */
|
|
/* Configure port A and C pins for FCC1 Ethernet. */
|
|
|
|
tempval = in_be32(&io->iop_pdira);
|
|
tempval &= ~PA1_DIRA0;
|
|
tempval |= PA1_DIRA1;
|
|
out_be32(&io->iop_pdira, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psora);
|
|
tempval &= ~PA1_PSORA0;
|
|
tempval |= PA1_PSORA1;
|
|
out_be32(&io->iop_psora, tempval);
|
|
|
|
setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
|
|
|
|
/* Alter clocks */
|
|
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
|
|
|
|
clrbits32(&io->iop_psorc, tempval);
|
|
clrbits32(&io->iop_pdirc, tempval);
|
|
setbits32(&io->iop_pparc, tempval);
|
|
|
|
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
|
|
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
|
|
|
|
iounmap(bcsr);
|
|
iounmap(immap);
|
|
}
|
|
|
|
static void init_fcc2_ioports(struct fs_platform_info *fpi)
|
|
{
|
|
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
struct device_node *np;
|
|
struct resource r;
|
|
u32 *bcsr;
|
|
|
|
struct io_port *io;
|
|
u32 tempval;
|
|
|
|
np = of_find_node_by_type(NULL, "memory");
|
|
if (!np) {
|
|
printk(KERN_INFO "No memory node in device tree\n");
|
|
return;
|
|
}
|
|
if (of_address_to_resource(np, 1, &r)) {
|
|
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
|
|
return;
|
|
}
|
|
of_node_put(np);
|
|
io = &immap->im_ioport;
|
|
bcsr = ioremap(r.start + 12, sizeof(u32));
|
|
|
|
/* Enable the PHY */
|
|
clrbits32(bcsr, BCSR3_FETHIEN2);
|
|
setbits32(bcsr, BCSR3_FETH2_RST);
|
|
|
|
/* FCC2 are port B/C. */
|
|
/* Configure port A and C pins for FCC2 Ethernet. */
|
|
|
|
tempval = in_be32(&io->iop_pdirb);
|
|
tempval &= ~PB2_DIRB0;
|
|
tempval |= PB2_DIRB1;
|
|
out_be32(&io->iop_pdirb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psorb);
|
|
tempval &= ~PB2_PSORB0;
|
|
tempval |= PB2_PSORB1;
|
|
out_be32(&io->iop_psorb, tempval);
|
|
|
|
setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
|
|
|
|
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
|
|
|
|
/* Alter clocks */
|
|
clrbits32(&io->iop_psorc, tempval);
|
|
clrbits32(&io->iop_pdirc, tempval);
|
|
setbits32(&io->iop_pparc, tempval);
|
|
|
|
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
|
|
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
|
|
|
|
iounmap(bcsr);
|
|
iounmap(immap);
|
|
}
|
|
|
|
void init_fcc_ioports(struct fs_platform_info *fpi)
|
|
{
|
|
int fcc_no = fs_get_fcc_index(fpi->fs_no);
|
|
|
|
switch (fcc_no) {
|
|
case 0:
|
|
init_fcc1_ioports(fpi);
|
|
break;
|
|
case 1:
|
|
init_fcc2_ioports(fpi);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
|
|
{
|
|
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
|
|
/* SCC1 is only on port D */
|
|
setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
|
|
clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
|
|
setbits32(&immap->im_ioport.iop_psord, 0x00000002);
|
|
clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
|
|
setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
|
|
|
|
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
|
|
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
|
|
setbits32(&immap->im_cpmux.cmx_scr,
|
|
((data->clk_tx - 1) << (4 - data->clk_tx)));
|
|
setbits32(&immap->im_cpmux.cmx_scr,
|
|
((data->clk_rx - 1) << (4 - data->clk_rx)));
|
|
|
|
iounmap(immap);
|
|
}
|
|
|
|
static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
|
|
{
|
|
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
|
|
setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
|
|
clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
|
|
clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
|
|
setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
|
|
|
|
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
|
|
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
|
|
setbits32(&immap->im_cpmux.cmx_scr,
|
|
((data->clk_tx - 1) << (4 - data->clk_tx)));
|
|
setbits32(&immap->im_cpmux.cmx_scr,
|
|
((data->clk_rx - 1) << (4 - data->clk_rx)));
|
|
|
|
iounmap(immap);
|
|
}
|
|
|
|
void init_scc_ioports(struct fs_uart_platform_info *data)
|
|
{
|
|
int scc_no = fs_get_scc_index(data->fs_no);
|
|
|
|
switch (scc_no) {
|
|
case 0:
|
|
init_scc1_uart_ioports(data);
|
|
data->brg = data->clk_rx;
|
|
break;
|
|
case 3:
|
|
init_scc4_uart_ioports(data);
|
|
data->brg = data->clk_rx;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
void __init m82xx_board_setup(void)
|
|
{
|
|
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
|
|
struct device_node *np;
|
|
struct resource r;
|
|
u32 *bcsr;
|
|
|
|
np = of_find_node_by_type(NULL, "memory");
|
|
if (!np) {
|
|
printk(KERN_INFO "No memory node in device tree\n");
|
|
return;
|
|
}
|
|
if (of_address_to_resource(np, 1, &r)) {
|
|
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
|
|
return;
|
|
}
|
|
of_node_put(np);
|
|
bcsr = ioremap(r.start + 4, sizeof(u32));
|
|
/* Enable the 2nd UART port */
|
|
clrbits32(bcsr, BCSR1_RS232_EN2);
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC1
|
|
clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
|
|
UART_SCCM_TX | UART_SCCM_RX);
|
|
clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
|
|
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC2
|
|
clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
|
|
UART_SCCM_TX | UART_SCCM_RX);
|
|
clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
|
|
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC3
|
|
clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
|
|
UART_SCCM_TX | UART_SCCM_RX);
|
|
clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
|
|
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC4
|
|
clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
|
|
UART_SCCM_TX | UART_SCCM_RX);
|
|
clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
|
|
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
#endif
|
|
|
|
iounmap(bcsr);
|
|
iounmap(immap);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static void m82xx_pci_mask_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - pci_int_base;
|
|
|
|
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void m82xx_pci_unmask_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - pci_int_base;
|
|
|
|
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void m82xx_pci_mask_and_ack(unsigned int irq)
|
|
{
|
|
int bit = irq - pci_int_base;
|
|
|
|
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
static void m82xx_pci_end_irq(unsigned int irq)
|
|
{
|
|
int bit = irq - pci_int_base;
|
|
|
|
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
|
|
return;
|
|
}
|
|
|
|
struct hw_interrupt_type m82xx_pci_ic = {
|
|
.typename = "MPC82xx ADS PCI",
|
|
.name = "MPC82xx ADS PCI",
|
|
.enable = m82xx_pci_unmask_irq,
|
|
.disable = m82xx_pci_mask_irq,
|
|
.ack = m82xx_pci_mask_and_ack,
|
|
.end = m82xx_pci_end_irq,
|
|
.mask = m82xx_pci_mask_irq,
|
|
.mask_ack = m82xx_pci_mask_and_ack,
|
|
.unmask = m82xx_pci_unmask_irq,
|
|
.eoi = m82xx_pci_end_irq,
|
|
};
|
|
|
|
static void
|
|
m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned long stat, mask, pend;
|
|
int bit;
|
|
|
|
for (;;) {
|
|
stat = *pci_regs.pci_int_stat_reg;
|
|
mask = *pci_regs.pci_int_mask_reg;
|
|
pend = stat & ~mask & 0xf0000000;
|
|
if (!pend)
|
|
break;
|
|
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
|
|
if (pend & 0x80000000)
|
|
__do_IRQ(pci_int_base + bit);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
get_irq_desc(virq)->status |= IRQ_LEVEL;
|
|
set_irq_chip(virq, &m82xx_pci_ic);
|
|
return 0;
|
|
}
|
|
|
|
static void pci_host_unmap(struct irq_host *h, unsigned int virq)
|
|
{
|
|
/* remove chip and handler */
|
|
set_irq_chip(virq, NULL);
|
|
}
|
|
|
|
static struct irq_host_ops pci_pic_host_ops = {
|
|
.map = pci_pic_host_map,
|
|
.unmap = pci_host_unmap,
|
|
};
|
|
|
|
void m82xx_pci_init_irq(void)
|
|
{
|
|
int irq;
|
|
cpm2_map_t *immap;
|
|
struct device_node *np;
|
|
struct resource r;
|
|
const u32 *regs;
|
|
unsigned int size;
|
|
const u32 *irq_map;
|
|
int i;
|
|
unsigned int irq_max, irq_min;
|
|
|
|
if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
|
|
printk(KERN_INFO "No SOC node in device tree\n");
|
|
return;
|
|
}
|
|
memset(&r, 0, sizeof(r));
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_INFO "No SOC reg property in device tree\n");
|
|
return;
|
|
}
|
|
immap = ioremap(r.start, sizeof(*immap));
|
|
of_node_put(np);
|
|
|
|
/* install the demultiplexer for the PCI cascade interrupt */
|
|
np = of_find_node_by_type(NULL, "pci");
|
|
if (!np) {
|
|
printk(KERN_INFO "No pci node on device tree\n");
|
|
iounmap(immap);
|
|
return;
|
|
}
|
|
irq_map = of_get_property(np, "interrupt-map", &size);
|
|
if ((!irq_map) || (size <= 7)) {
|
|
printk(KERN_INFO "No interrupt-map property of pci node\n");
|
|
iounmap(immap);
|
|
return;
|
|
}
|
|
size /= sizeof(irq_map[0]);
|
|
for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
|
|
if (irq_map[5] < irq_min)
|
|
irq_min = irq_map[5];
|
|
if (irq_map[5] > irq_max)
|
|
irq_max = irq_map[5];
|
|
}
|
|
pci_int_base = irq_min;
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
set_irq_chained_handler(irq, m82xx_pci_irq_demux);
|
|
of_node_put(np);
|
|
np = of_find_node_by_type(NULL, "pci-pic");
|
|
if (!np) {
|
|
printk(KERN_INFO "No pci pic node on device tree\n");
|
|
iounmap(immap);
|
|
return;
|
|
}
|
|
/* PCI interrupt controller registers: status and mask */
|
|
regs = of_get_property(np, "reg", &size);
|
|
if ((!regs) || (size <= 2)) {
|
|
printk(KERN_INFO "No reg property in pci pic node\n");
|
|
iounmap(immap);
|
|
return;
|
|
}
|
|
pci_regs.pci_int_stat_reg =
|
|
ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
|
|
pci_regs.pci_int_mask_reg =
|
|
ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
|
|
/* configure chip select for PCI interrupt controller */
|
|
immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
|
|
immap->im_memctl.memc_or3 = 0xffff8010;
|
|
/* make PCI IRQ level sensitive */
|
|
immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
|
|
|
|
/* mask all PCI interrupts */
|
|
*pci_regs.pci_int_mask_reg |= 0xfff00000;
|
|
iounmap(immap);
|
|
pci_pic_host =
|
|
irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
|
|
&pci_pic_host_ops, irq_max + 1);
|
|
return;
|
|
}
|
|
|
|
static int m82xx_pci_exclude_device(struct pci_controller *hose,
|
|
u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static void __init mpc82xx_add_bridge(struct device_node *np)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource r;
|
|
const int *bus_range;
|
|
const uint *ptr;
|
|
|
|
memset(&r, 0, sizeof(r));
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_INFO "No PCI reg property in device tree\n");
|
|
return;
|
|
}
|
|
if (!(ptr = of_get_property(np, "clock-frequency", NULL))) {
|
|
printk(KERN_INFO "No clock-frequency property in PCI node");
|
|
return;
|
|
}
|
|
pci_clk_frq = *ptr;
|
|
of_node_put(np);
|
|
bus_range = of_get_property(np, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", np->full_name);
|
|
}
|
|
|
|
pci_assign_all_buses = 1;
|
|
|
|
hose = pcibios_alloc_controller(np);
|
|
|
|
if (!hose)
|
|
return;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
setup_indirect_pci(hose,
|
|
r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
|
|
r.start + offsetof(pci_cpm2_t, pci_cfg_data),
|
|
0);
|
|
|
|
pci_process_bridge_OF_ranges(hose, np, 1);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init mpc8272_ads_setup_arch(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
struct device_node *np;
|
|
#endif
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc8272_ads_setup_arch()", 0);
|
|
cpm2_reset();
|
|
|
|
/* Map I/O region to a 256MB BAT */
|
|
|
|
m82xx_board_setup();
|
|
|
|
#ifdef CONFIG_PCI
|
|
ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
|
|
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
|
|
mpc82xx_add_bridge(np);
|
|
|
|
of_node_put(np);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_HDA1;
|
|
#endif
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0);
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc8272_ads_probe(void)
|
|
{
|
|
/* We always match for now, eventually we should look at
|
|
* the flat dev tree to ensure this is the board we are
|
|
* supposed to run on
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
#define RMR_CSRE 0x00000001
|
|
static void m82xx_restart(char *cmd)
|
|
{
|
|
__volatile__ unsigned char dummy;
|
|
|
|
local_irq_disable();
|
|
((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
|
|
|
|
/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
|
|
mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
|
|
dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
|
|
printk("Restart failed\n");
|
|
while (1) ;
|
|
}
|
|
|
|
define_machine(mpc8272_ads)
|
|
{
|
|
.name = "MPC8272 ADS",
|
|
.probe = mpc8272_ads_probe,
|
|
.setup_arch = mpc8272_ads_setup_arch,
|
|
.init_IRQ = mpc8272_ads_pic_init,
|
|
.get_irq = cpm2_get_irq,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.restart = m82xx_restart,
|
|
};
|