1004 строки
27 KiB
C
1004 строки
27 KiB
C
/*
|
|
* Driver for the i2c controller on the Marvell line of host bridges
|
|
* (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
|
|
*
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
*
|
|
* 2005 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mv643xx_i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1)
|
|
#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
|
|
#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3)
|
|
|
|
#define MV64XXX_I2C_REG_CONTROL_ACK BIT(2)
|
|
#define MV64XXX_I2C_REG_CONTROL_IFLG BIT(3)
|
|
#define MV64XXX_I2C_REG_CONTROL_STOP BIT(4)
|
|
#define MV64XXX_I2C_REG_CONTROL_START BIT(5)
|
|
#define MV64XXX_I2C_REG_CONTROL_TWSIEN BIT(6)
|
|
#define MV64XXX_I2C_REG_CONTROL_INTEN BIT(7)
|
|
|
|
/* Ctlr status values */
|
|
#define MV64XXX_I2C_STATUS_BUS_ERR 0x00
|
|
#define MV64XXX_I2C_STATUS_MAST_START 0x08
|
|
#define MV64XXX_I2C_STATUS_MAST_REPEAT_START 0x10
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ACK 0x28
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_NO_ACK 0x30
|
|
#define MV64XXX_I2C_STATUS_MAST_LOST_ARB 0x38
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK 0x50
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
|
|
#define MV64XXX_I2C_STATUS_NO_STATUS 0xf8
|
|
|
|
/* Register defines (I2C bridge) */
|
|
#define MV64XXX_I2C_REG_TX_DATA_LO 0xc0
|
|
#define MV64XXX_I2C_REG_TX_DATA_HI 0xc4
|
|
#define MV64XXX_I2C_REG_RX_DATA_LO 0xc8
|
|
#define MV64XXX_I2C_REG_RX_DATA_HI 0xcc
|
|
#define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0
|
|
#define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC
|
|
#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0
|
|
|
|
/* Bridge Control values */
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_WR BIT(0)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RD BIT(1)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT BIT(12)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE BIT(19)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START BIT(20)
|
|
|
|
/* Bridge Status values */
|
|
#define MV64XXX_I2C_BRIDGE_STATUS_ERROR BIT(0)
|
|
|
|
/* Driver states */
|
|
enum {
|
|
MV64XXX_I2C_STATE_INVALID,
|
|
MV64XXX_I2C_STATE_IDLE,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_START_COND,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
|
|
};
|
|
|
|
/* Driver actions */
|
|
enum {
|
|
MV64XXX_I2C_ACTION_INVALID,
|
|
MV64XXX_I2C_ACTION_CONTINUE,
|
|
MV64XXX_I2C_ACTION_SEND_RESTART,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_1,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_2,
|
|
MV64XXX_I2C_ACTION_SEND_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA_STOP,
|
|
MV64XXX_I2C_ACTION_SEND_STOP,
|
|
};
|
|
|
|
struct mv64xxx_i2c_regs {
|
|
u8 addr;
|
|
u8 ext_addr;
|
|
u8 data;
|
|
u8 control;
|
|
u8 status;
|
|
u8 clock;
|
|
u8 soft_reset;
|
|
};
|
|
|
|
struct mv64xxx_i2c_data {
|
|
struct i2c_msg *msgs;
|
|
int num_msgs;
|
|
int irq;
|
|
u32 state;
|
|
u32 action;
|
|
u32 aborting;
|
|
u32 cntl_bits;
|
|
void __iomem *reg_base;
|
|
struct mv64xxx_i2c_regs reg_offsets;
|
|
u32 addr1;
|
|
u32 addr2;
|
|
u32 bytes_left;
|
|
u32 byte_posn;
|
|
u32 send_stop;
|
|
u32 block;
|
|
int rc;
|
|
u32 freq_m;
|
|
u32 freq_n;
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
struct clk *clk;
|
|
#endif
|
|
wait_queue_head_t waitq;
|
|
spinlock_t lock;
|
|
struct i2c_msg *msg;
|
|
struct i2c_adapter adapter;
|
|
bool offload_enabled;
|
|
/* 5us delay in order to avoid repeated start timing violation */
|
|
bool errata_delay;
|
|
struct reset_control *rstc;
|
|
bool irq_clear_inverted;
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x10,
|
|
.data = 0x04,
|
|
.control = 0x08,
|
|
.status = 0x0c,
|
|
.clock = 0x0c,
|
|
.soft_reset = 0x1c,
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x04,
|
|
.data = 0x08,
|
|
.control = 0x0c,
|
|
.status = 0x10,
|
|
.clock = 0x14,
|
|
.soft_reset = 0x18,
|
|
};
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 dir = 0;
|
|
|
|
drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
|
|
MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
dir = 1;
|
|
|
|
if (msg->flags & I2C_M_TEN) {
|
|
drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
|
|
drv_data->addr2 = (u32)msg->addr & 0xff;
|
|
} else {
|
|
drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
|
|
drv_data->addr2 = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Finite State Machine & Interrupt Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
|
|
/* Reset hardware and initialize FSM */
|
|
static void
|
|
mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
if (drv_data->offload_enabled) {
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
|
|
}
|
|
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
|
|
writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
|
|
drv_data->reg_base + drv_data->reg_offsets.clock);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
|
|
writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
|
|
{
|
|
/*
|
|
* If state is idle, then this is likely the remnants of an old
|
|
* operation that driver has given up on or the user has killed.
|
|
* If so, issue the stop condition and go to idle.
|
|
*/
|
|
if (drv_data->state == MV64XXX_I2C_STATE_IDLE) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
return;
|
|
}
|
|
|
|
/* The status from the ctlr [mostly] tells us what to do next */
|
|
switch (status) {
|
|
/* Start condition interrupt */
|
|
case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */
|
|
case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
|
|
break;
|
|
|
|
/* Performing a write */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
|
|
if ((drv_data->bytes_left == 0)
|
|
|| (drv_data->aborting
|
|
&& (drv_data->byte_posn != 0))) {
|
|
if (drv_data->send_stop || drv_data->aborting) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
} else {
|
|
drv_data->action =
|
|
MV64XXX_I2C_ACTION_SEND_RESTART;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
|
|
}
|
|
} else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
|
|
drv_data->bytes_left--;
|
|
}
|
|
break;
|
|
|
|
/* Performing a read */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
|
|
if (drv_data->bytes_left == 0) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
|
|
if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
|
|
drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
|
|
else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA;
|
|
drv_data->bytes_left--;
|
|
}
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
|
|
|
|
if ((drv_data->bytes_left == 1) || drv_data->aborting)
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
|
|
/* Doesn't seem to be a device at other end */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
drv_data->rc = -ENXIO;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
|
|
"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
|
|
drv_data->state, status, drv_data->msg->addr,
|
|
drv_data->msg->flags);
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
drv_data->rc = -EIO;
|
|
}
|
|
}
|
|
|
|
static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
drv_data->msg = drv_data->msgs;
|
|
drv_data->byte_posn = 0;
|
|
drv_data->bytes_left = drv_data->msg->len;
|
|
drv_data->aborting = 0;
|
|
drv_data->rc = 0;
|
|
|
|
mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
switch(drv_data->action) {
|
|
case MV64XXX_I2C_ACTION_SEND_RESTART:
|
|
/* We should only get here if we have further messages */
|
|
BUG_ON(drv_data->num_msgs == 0);
|
|
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
/*
|
|
* We're never at the start of the message here, and by this
|
|
* time it's already too late to do any protocol mangling.
|
|
* Thankfully, do not advertise support for that feature.
|
|
*/
|
|
drv_data->send_stop = drv_data->num_msgs == 1;
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_CONTINUE:
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
|
|
writel(drv_data->addr1,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_2:
|
|
writel(drv_data->addr2,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_DATA:
|
|
writel(drv_data->msg->buf[drv_data->byte_posn++],
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_INVALID:
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_do_action: Invalid action: %d\n",
|
|
drv_data->action);
|
|
drv_data->rc = -EIO;
|
|
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_ACTION_SEND_STOP:
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_read_offload_rx_data(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 buf[2];
|
|
|
|
buf[0] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_LO);
|
|
buf[1] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_HI);
|
|
|
|
memcpy(msg->buf, buf, msg->len);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_intr_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
u32 cause, status;
|
|
|
|
cause = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
if (!cause)
|
|
return IRQ_NONE;
|
|
|
|
status = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_STATUS);
|
|
|
|
if (status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) {
|
|
drv_data->rc = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
drv_data->rc = 0;
|
|
|
|
/*
|
|
* Transaction is a one message read transaction, read data
|
|
* for this message.
|
|
*/
|
|
if (drv_data->num_msgs == 1 && drv_data->msgs[0].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs);
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
}
|
|
/*
|
|
* Transaction is a two messages write/read transaction, read
|
|
* data for the second (read) message.
|
|
*/
|
|
else if (drv_data->num_msgs == 2 &&
|
|
!(drv_data->msgs[0].flags & I2C_M_RD) &&
|
|
drv_data->msgs[1].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs + 1);
|
|
drv_data->msgs += 2;
|
|
drv_data->num_msgs -= 2;
|
|
}
|
|
|
|
out:
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
drv_data->block = 0;
|
|
|
|
wake_up(&drv_data->waitq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
mv64xxx_i2c_intr(int irq, void *dev_id)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = dev_id;
|
|
unsigned long flags;
|
|
u32 status;
|
|
irqreturn_t rc = IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
if (drv_data->offload_enabled)
|
|
rc = mv64xxx_i2c_intr_offload(drv_data);
|
|
|
|
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
|
|
MV64XXX_I2C_REG_CONTROL_IFLG) {
|
|
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
|
|
mv64xxx_i2c_fsm(drv_data, status);
|
|
mv64xxx_i2c_do_action(drv_data);
|
|
|
|
if (drv_data->irq_clear_inverted)
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Msg Execution Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static void
|
|
mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
long time_left;
|
|
unsigned long flags;
|
|
char abort = 0;
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
if (!time_left) { /* Timed out */
|
|
drv_data->rc = -ETIMEDOUT;
|
|
abort = 1;
|
|
} else if (time_left < 0) { /* Interrupted/Error */
|
|
drv_data->rc = time_left; /* errno value */
|
|
abort = 1;
|
|
}
|
|
|
|
if (abort && drv_data->block) {
|
|
drv_data->aborting = 1;
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
if ((time_left <= 0) && drv_data->block) {
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: I2C bus locked, block: %d, "
|
|
"time_left: %d\n", drv_data->block,
|
|
(int)time_left);
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
}
|
|
} else
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
|
|
int is_last)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
|
|
|
|
drv_data->send_stop = is_last;
|
|
drv_data->block = 1;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_tx(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msg = drv_data->msgs;
|
|
u32 buf[2];
|
|
|
|
memcpy(buf, msg->buf, msg->len);
|
|
|
|
writel(buf[0], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
|
|
writel(buf[1], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_offload_xfer(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
unsigned long ctrl_reg;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
/* Build transaction */
|
|
ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
|
|
(msgs[0].addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
|
|
|
|
if (msgs[0].flags & I2C_M_TEN)
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
|
|
|
|
/* Single write message transaction */
|
|
if (num == 1 && !(msgs[0].flags & I2C_M_RD)) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT);
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
/* Single read message transaction */
|
|
else if (num == 1 && msgs[0].flags & I2C_M_RD) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT);
|
|
}
|
|
/*
|
|
* Transaction with one write and one read message. This is
|
|
* guaranteed by the mv64xx_i2c_can_offload() checks.
|
|
*/
|
|
else if (num == 2) {
|
|
size_t lentx = msgs[0].len - 1;
|
|
size_t lenrx = msgs[1].len - 1;
|
|
|
|
ctrl_reg |=
|
|
MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(lentx << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT) |
|
|
(lenrx << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT) |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START;
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
|
|
/* Execute transaction */
|
|
drv_data->block = 1;
|
|
writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_valid_offload_sz(struct i2c_msg *msg)
|
|
{
|
|
return msg->len <= 8 && msg->len >= 1;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
|
|
return false;
|
|
|
|
if (!drv_data->offload_enabled)
|
|
return false;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of a single
|
|
* message, as long as the message has a length between 1 and
|
|
* 8 bytes.
|
|
*/
|
|
if (num == 1 && mv64xxx_i2c_valid_offload_sz(msgs))
|
|
return true;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of two messages, if
|
|
* the first is a write and a second is a read, and both have
|
|
* a length between 1 and 8 bytes.
|
|
*/
|
|
if (num == 2 &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs) &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs + 1) &&
|
|
!(msgs[0].flags & I2C_M_RD) &&
|
|
msgs[1].flags & I2C_M_RD)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Core Support Routines (Interface to higher level I2C code)
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static u32
|
|
mv64xxx_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
|
|
int rc, ret = num;
|
|
|
|
BUG_ON(drv_data->msgs != NULL);
|
|
drv_data->msgs = msgs;
|
|
drv_data->num_msgs = num;
|
|
|
|
if (mv64xxx_i2c_can_offload(drv_data))
|
|
rc = mv64xxx_i2c_offload_xfer(drv_data);
|
|
else
|
|
rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
|
|
|
|
if (rc < 0)
|
|
ret = rc;
|
|
|
|
drv_data->num_msgs = 0;
|
|
drv_data->msgs = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_algorithm mv64xxx_i2c_algo = {
|
|
.master_xfer = mv64xxx_i2c_xfer,
|
|
.functionality = mv64xxx_i2c_functionality,
|
|
};
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Driver Interface & Early Init Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
|
|
|
|
#ifdef CONFIG_OF
|
|
#ifdef CONFIG_HAVE_CLK
|
|
static int
|
|
mv64xxx_calc_freq(const int tclk, const int n, const int m)
|
|
{
|
|
return tclk / (10 * (m + 1) * (2 << n));
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
|
|
u32 *best_m)
|
|
{
|
|
int freq, delta, best_delta = INT_MAX;
|
|
int m, n;
|
|
|
|
for (n = 0; n <= 7; n++)
|
|
for (m = 0; m <= 15; m++) {
|
|
freq = mv64xxx_calc_freq(tclk, n, m);
|
|
delta = req_freq - freq;
|
|
if (delta >= 0 && delta < best_delta) {
|
|
*best_m = m;
|
|
*best_n = n;
|
|
best_delta = delta;
|
|
}
|
|
if (best_delta == 0)
|
|
return true;
|
|
}
|
|
if (best_delta == INT_MAX)
|
|
return false;
|
|
return true;
|
|
}
|
|
#endif /* CONFIG_HAVE_CLK */
|
|
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
/* CLK is mandatory when using DT to describe the i2c bus. We
|
|
* need to know tclk in order to calculate bus clock
|
|
* factors.
|
|
*/
|
|
#if !defined(CONFIG_HAVE_CLK)
|
|
/* Have OF but no CLK */
|
|
return -ENODEV;
|
|
#else
|
|
const struct of_device_id *device;
|
|
struct device_node *np = dev->of_node;
|
|
u32 bus_freq, tclk;
|
|
int rc = 0;
|
|
|
|
if (IS_ERR(drv_data->clk)) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
tclk = clk_get_rate(drv_data->clk);
|
|
|
|
if (of_property_read_u32(np, "clock-frequency", &bus_freq))
|
|
bus_freq = 100000; /* 100kHz by default */
|
|
|
|
if (!mv64xxx_find_baud_factors(bus_freq, tclk,
|
|
&drv_data->freq_n, &drv_data->freq_m)) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
drv_data->irq = irq_of_parse_and_map(np, 0);
|
|
|
|
drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
|
|
if (IS_ERR(drv_data->rstc)) {
|
|
if (PTR_ERR(drv_data->rstc) == -EPROBE_DEFER) {
|
|
rc = -EPROBE_DEFER;
|
|
goto out;
|
|
}
|
|
} else {
|
|
reset_control_deassert(drv_data->rstc);
|
|
}
|
|
|
|
/* Its not yet defined how timeouts will be specified in device tree.
|
|
* So hard code the value to 1 second.
|
|
*/
|
|
drv_data->adapter.timeout = HZ;
|
|
|
|
device = of_match_device(mv64xxx_i2c_of_match_table, dev);
|
|
if (!device)
|
|
return -ENODEV;
|
|
|
|
memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
|
|
|
|
/*
|
|
* For controllers embedded in new SoCs activate the
|
|
* Transaction Generator support and the errata fix.
|
|
*/
|
|
if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
|
|
drv_data->offload_enabled = true;
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
|
|
drv_data->offload_enabled = false;
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
|
|
drv_data->irq_clear_inverted = true;
|
|
|
|
out:
|
|
return rc;
|
|
#endif
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int
|
|
mv64xxx_i2c_probe(struct platform_device *pd)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data;
|
|
struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev);
|
|
struct resource *r;
|
|
int rc;
|
|
|
|
if ((!pdata && !pd->dev.of_node))
|
|
return -ENODEV;
|
|
|
|
drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
|
|
GFP_KERNEL);
|
|
if (!drv_data)
|
|
return -ENOMEM;
|
|
|
|
r = platform_get_resource(pd, IORESOURCE_MEM, 0);
|
|
drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
|
|
if (IS_ERR(drv_data->reg_base))
|
|
return PTR_ERR(drv_data->reg_base);
|
|
|
|
strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
|
|
sizeof(drv_data->adapter.name));
|
|
|
|
init_waitqueue_head(&drv_data->waitq);
|
|
spin_lock_init(&drv_data->lock);
|
|
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
drv_data->clk = devm_clk_get(&pd->dev, NULL);
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_prepare(drv_data->clk);
|
|
clk_enable(drv_data->clk);
|
|
}
|
|
#endif
|
|
if (pdata) {
|
|
drv_data->freq_m = pdata->freq_m;
|
|
drv_data->freq_n = pdata->freq_n;
|
|
drv_data->irq = platform_get_irq(pd, 0);
|
|
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
|
|
drv_data->offload_enabled = false;
|
|
memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
|
|
} else if (pd->dev.of_node) {
|
|
rc = mv64xxx_of_config(drv_data, &pd->dev);
|
|
if (rc)
|
|
goto exit_clk;
|
|
}
|
|
if (drv_data->irq < 0) {
|
|
rc = -ENXIO;
|
|
goto exit_reset;
|
|
}
|
|
|
|
drv_data->adapter.dev.parent = &pd->dev;
|
|
drv_data->adapter.algo = &mv64xxx_i2c_algo;
|
|
drv_data->adapter.owner = THIS_MODULE;
|
|
drv_data->adapter.class = I2C_CLASS_DEPRECATED;
|
|
drv_data->adapter.nr = pd->id;
|
|
drv_data->adapter.dev.of_node = pd->dev.of_node;
|
|
platform_set_drvdata(pd, drv_data);
|
|
i2c_set_adapdata(&drv_data->adapter, drv_data);
|
|
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
|
|
rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
|
|
MV64XXX_I2C_CTLR_NAME, drv_data);
|
|
if (rc) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't register intr handler irq%d: %d\n",
|
|
drv_data->irq, rc);
|
|
goto exit_reset;
|
|
} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
|
|
goto exit_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
free_irq(drv_data->irq, drv_data);
|
|
exit_reset:
|
|
if (!IS_ERR_OR_NULL(drv_data->rstc))
|
|
reset_control_assert(drv_data->rstc);
|
|
exit_clk:
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_disable(drv_data->clk);
|
|
clk_unprepare(drv_data->clk);
|
|
}
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&drv_data->adapter);
|
|
free_irq(drv_data->irq, drv_data);
|
|
if (!IS_ERR_OR_NULL(drv_data->rstc))
|
|
reset_control_assert(drv_data->rstc);
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_disable(drv_data->clk);
|
|
clk_unprepare(drv_data->clk);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mv64xxx_i2c_driver = {
|
|
.probe = mv64xxx_i2c_probe,
|
|
.remove = mv64xxx_i2c_remove,
|
|
.driver = {
|
|
.name = MV64XXX_I2C_CTLR_NAME,
|
|
.of_match_table = mv64xxx_i2c_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mv64xxx_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
|
MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver");
|
|
MODULE_LICENSE("GPL");
|