138 строки
3.4 KiB
C
138 строки
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Motorcomm PHYs
|
|
*
|
|
* Author: Peter Geis <pgwipeout@gmail.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
|
|
#define PHY_ID_YT8511 0x0000010a
|
|
|
|
#define YT8511_PAGE_SELECT 0x1e
|
|
#define YT8511_PAGE 0x1f
|
|
#define YT8511_EXT_CLK_GATE 0x0c
|
|
#define YT8511_EXT_DELAY_DRIVE 0x0d
|
|
#define YT8511_EXT_SLEEP_CTRL 0x27
|
|
|
|
/* 2b00 25m from pll
|
|
* 2b01 25m from xtl *default*
|
|
* 2b10 62.m from pll
|
|
* 2b11 125m from pll
|
|
*/
|
|
#define YT8511_CLK_125M (BIT(2) | BIT(1))
|
|
#define YT8511_PLLON_SLP BIT(14)
|
|
|
|
/* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
|
|
#define YT8511_DELAY_RX BIT(0)
|
|
|
|
/* TX Gig-E Delay is bits 7:4, default 0x5
|
|
* TX Fast-E Delay is bits 15:12, default 0xf
|
|
* Delay = 150ps * N - 250ps
|
|
* On = 2000ps, off = 50ps
|
|
*/
|
|
#define YT8511_DELAY_GE_TX_EN (0xf << 4)
|
|
#define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
|
|
#define YT8511_DELAY_FE_TX_EN (0xf << 12)
|
|
#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
|
|
|
|
static int yt8511_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, YT8511_PAGE_SELECT);
|
|
};
|
|
|
|
static int yt8511_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
return __phy_write(phydev, YT8511_PAGE_SELECT, page);
|
|
};
|
|
|
|
static int yt8511_config_init(struct phy_device *phydev)
|
|
{
|
|
int oldpage, ret = 0;
|
|
unsigned int ge, fe;
|
|
|
|
oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
|
|
if (oldpage < 0)
|
|
goto err_restore_page;
|
|
|
|
/* set rgmii delay mode */
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
ge = YT8511_DELAY_GE_TX_DIS;
|
|
fe = YT8511_DELAY_FE_TX_DIS;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
|
|
fe = YT8511_DELAY_FE_TX_DIS;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
ge = YT8511_DELAY_GE_TX_EN;
|
|
fe = YT8511_DELAY_FE_TX_EN;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
|
|
fe = YT8511_DELAY_FE_TX_EN;
|
|
break;
|
|
default: /* do not support other modes */
|
|
ret = -EOPNOTSUPP;
|
|
goto err_restore_page;
|
|
}
|
|
|
|
ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
/* set clock mode to 125mhz */
|
|
ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
/* fast ethernet delay is in a separate page */
|
|
ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
/* leave pll enabled in sleep */
|
|
ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP);
|
|
if (ret < 0)
|
|
goto err_restore_page;
|
|
|
|
err_restore_page:
|
|
return phy_restore_page(phydev, oldpage, ret);
|
|
}
|
|
|
|
static struct phy_driver motorcomm_phy_drvs[] = {
|
|
{
|
|
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
|
|
.name = "YT8511 Gigabit Ethernet",
|
|
.config_init = yt8511_config_init,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = yt8511_read_page,
|
|
.write_page = yt8511_write_page,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(motorcomm_phy_drvs);
|
|
|
|
MODULE_DESCRIPTION("Motorcomm PHY driver");
|
|
MODULE_AUTHOR("Peter Geis");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
|
|
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
|
|
{ /* sentinal */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
|