792 строки
28 KiB
Plaintext
792 строки
28 KiB
Plaintext
IETF CIPSO Working Group
|
|
16 July, 1992
|
|
|
|
|
|
|
|
COMMERCIAL IP SECURITY OPTION (CIPSO 2.2)
|
|
|
|
|
|
|
|
1. Status
|
|
|
|
This Internet Draft provides the high level specification for a Commercial
|
|
IP Security Option (CIPSO). This draft reflects the version as approved by
|
|
the CIPSO IETF Working Group. Distribution of this memo is unlimited.
|
|
|
|
This document is an Internet Draft. Internet Drafts are working documents
|
|
of the Internet Engineering Task Force (IETF), its Areas, and its Working
|
|
Groups. Note that other groups may also distribute working documents as
|
|
Internet Drafts.
|
|
|
|
Internet Drafts are draft documents valid for a maximum of six months.
|
|
Internet Drafts may be updated, replaced, or obsoleted by other documents
|
|
at any time. It is not appropriate to use Internet Drafts as reference
|
|
material or to cite them other than as a "working draft" or "work in
|
|
progress."
|
|
|
|
Please check the I-D abstract listing contained in each Internet Draft
|
|
directory to learn the current status of this or any other Internet Draft.
|
|
|
|
|
|
|
|
|
|
2. Background
|
|
|
|
Currently the Internet Protocol includes two security options. One of
|
|
these options is the DoD Basic Security Option (BSO) (Type 130) which allows
|
|
IP datagrams to be labeled with security classifications. This option
|
|
provides sixteen security classifications and a variable number of handling
|
|
restrictions. To handle additional security information, such as security
|
|
categories or compartments, another security option (Type 133) exists and
|
|
is referred to as the DoD Extended Security Option (ESO). The values for
|
|
the fixed fields within these two options are administered by the Defense
|
|
Information Systems Agency (DISA).
|
|
|
|
Computer vendors are now building commercial operating systems with
|
|
mandatory access controls and multi-level security. These systems are
|
|
no longer built specifically for a particular group in the defense or
|
|
intelligence communities. They are generally available commercial systems
|
|
for use in a variety of government and civil sector environments.
|
|
|
|
The small number of ESO format codes can not support all the possible
|
|
applications of a commercial security option. The BSO and ESO were
|
|
designed to only support the United States DoD. CIPSO has been designed
|
|
to support multiple security policies. This Internet Draft provides the
|
|
format and procedures required to support a Mandatory Access Control
|
|
security policy. Support for additional security policies shall be
|
|
defined in future RFCs.
|
|
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 1]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
|
|
3. CIPSO Format
|
|
|
|
Option type: 134 (Class 0, Number 6, Copy on Fragmentation)
|
|
Option length: Variable
|
|
|
|
This option permits security related information to be passed between
|
|
systems within a single Domain of Interpretation (DOI). A DOI is a
|
|
collection of systems which agree on the meaning of particular values
|
|
in the security option. An authority that has been assigned a DOI
|
|
identifier will define a mapping between appropriate CIPSO field values
|
|
and their human readable equivalent. This authority will distribute that
|
|
mapping to hosts within the authority's domain. These mappings may be
|
|
sensitive, therefore a DOI authority is not required to make these
|
|
mappings available to anyone other than the systems that are included in
|
|
the DOI.
|
|
|
|
This option MUST be copied on fragmentation. This option appears at most
|
|
once in a datagram. All multi-octet fields in the option are defined to be
|
|
transmitted in network byte order. The format of this option is as follows:
|
|
|
|
+----------+----------+------//------+-----------//---------+
|
|
| 10000110 | LLLLLLLL | DDDDDDDDDDDD | TTTTTTTTTTTTTTTTTTTT |
|
|
+----------+----------+------//------+-----------//---------+
|
|
|
|
TYPE=134 OPTION DOMAIN OF TAGS
|
|
LENGTH INTERPRETATION
|
|
|
|
|
|
Figure 1. CIPSO Format
|
|
|
|
|
|
3.1 Type
|
|
|
|
This field is 1 octet in length. Its value is 134.
|
|
|
|
|
|
3.2 Length
|
|
|
|
This field is 1 octet in length. It is the total length of the option
|
|
including the type and length fields. With the current IP header length
|
|
restriction of 40 octets the value of this field MUST not exceed 40.
|
|
|
|
|
|
3.3 Domain of Interpretation Identifier
|
|
|
|
This field is an unsigned 32 bit integer. The value 0 is reserved and MUST
|
|
not appear as the DOI identifier in any CIPSO option. Implementations
|
|
should assume that the DOI identifier field is not aligned on any particular
|
|
byte boundary.
|
|
|
|
To conserve space in the protocol, security levels and categories are
|
|
represented by numbers rather than their ASCII equivalent. This requires
|
|
a mapping table within CIPSO hosts to map these numbers to their
|
|
corresponding ASCII representations. Non-related groups of systems may
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 2]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
have their own unique mappings. For example, one group of systems may
|
|
use the number 5 to represent Unclassified while another group may use the
|
|
number 1 to represent that same security level. The DOI identifier is used
|
|
to identify which mapping was used for the values within the option.
|
|
|
|
|
|
3.4 Tag Types
|
|
|
|
A common format for passing security related information is necessary
|
|
for interoperability. CIPSO uses sets of "tags" to contain the security
|
|
information relevant to the data in the IP packet. Each tag begins with
|
|
a tag type identifier followed by the length of the tag and ends with the
|
|
actual security information to be passed. All multi-octet fields in a tag
|
|
are defined to be transmitted in network byte order. Like the DOI
|
|
identifier field in the CIPSO header, implementations should assume that
|
|
all tags, as well as fields within a tag, are not aligned on any particular
|
|
octet boundary. The tag types defined in this document contain alignment
|
|
bytes to assist alignment of some information, however alignment can not
|
|
be guaranteed if CIPSO is not the first IP option.
|
|
|
|
CIPSO tag types 0 through 127 are reserved for defining standard tag
|
|
formats. Their definitions will be published in RFCs. Tag types whose
|
|
identifiers are greater than 127 are defined by the DOI authority and may
|
|
only be meaningful in certain Domains of Interpretation. For these tag
|
|
types, implementations will require the DOI identifier as well as the tag
|
|
number to determine the security policy and the format associated with the
|
|
tag. Use of tag types above 127 are restricted to closed networks where
|
|
interoperability with other networks will not be an issue. Implementations
|
|
that support a tag type greater than 127 MUST support at least one DOI that
|
|
requires only tag types 1 to 127.
|
|
|
|
Tag type 0 is reserved. Tag types 1, 2, and 5 are defined in this
|
|
Internet Draft. Types 3 and 4 are reserved for work in progress.
|
|
The standard format for all current and future CIPSO tags is shown below:
|
|
|
|
+----------+----------+--------//--------+
|
|
| TTTTTTTT | LLLLLLLL | IIIIIIIIIIIIIIII |
|
|
+----------+----------+--------//--------+
|
|
TAG TAG TAG
|
|
TYPE LENGTH INFORMATION
|
|
|
|
Figure 2: Standard Tag Format
|
|
|
|
In the three tag types described in this document, the length and count
|
|
restrictions are based on the current IP limitation of 40 octets for all
|
|
IP options. If the IP header is later expanded, then the length and count
|
|
restrictions specified in this document may increase to use the full area
|
|
provided for IP options.
|
|
|
|
|
|
3.4.1 Tag Type Classes
|
|
|
|
Tag classes consist of tag types that have common processing requirements
|
|
and support the same security policy. The three tags defined in this
|
|
Internet Draft belong to the Mandatory Access Control (MAC) Sensitivity
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 3]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
class and support the MAC Sensitivity security policy.
|
|
|
|
|
|
3.4.2 Tag Type 1
|
|
|
|
This is referred to as the "bit-mapped" tag type. Tag type 1 is included
|
|
in the MAC Sensitivity tag type class. The format of this tag type is as
|
|
follows:
|
|
|
|
+----------+----------+----------+----------+--------//---------+
|
|
| 00000001 | LLLLLLLL | 00000000 | LLLLLLLL | CCCCCCCCCCCCCCCCC |
|
|
+----------+----------+----------+----------+--------//---------+
|
|
|
|
TAG TAG ALIGNMENT SENSITIVITY BIT MAP OF
|
|
TYPE LENGTH OCTET LEVEL CATEGORIES
|
|
|
|
Figure 3. Tag Type 1 Format
|
|
|
|
|
|
3.4.2.1 Tag Type
|
|
|
|
This field is 1 octet in length and has a value of 1.
|
|
|
|
|
|
3.4.2.2 Tag Length
|
|
|
|
This field is 1 octet in length. It is the total length of the tag type
|
|
including the type and length fields. With the current IP header length
|
|
restriction of 40 bytes the value within this field is between 4 and 34.
|
|
|
|
|
|
3.4.2.3 Alignment Octet
|
|
|
|
This field is 1 octet in length and always has the value of 0. Its purpose
|
|
is to align the category bitmap field on an even octet boundary. This will
|
|
speed many implementations including router implementations.
|
|
|
|
|
|
3.4.2.4 Sensitivity Level
|
|
|
|
This field is 1 octet in length. Its value is from 0 to 255. The values
|
|
are ordered with 0 being the minimum value and 255 representing the maximum
|
|
value.
|
|
|
|
|
|
3.4.2.5 Bit Map of Categories
|
|
|
|
The length of this field is variable and ranges from 0 to 30 octets. This
|
|
provides representation of categories 0 to 239. The ordering of the bits
|
|
is left to right or MSB to LSB. For example category 0 is represented by
|
|
the most significant bit of the first byte and category 15 is represented
|
|
by the least significant bit of the second byte. Figure 4 graphically
|
|
shows this ordering. Bit N is binary 1 if category N is part of the label
|
|
for the datagram, and bit N is binary 0 if category N is not part of the
|
|
label. Except for the optimized tag 1 format described in the next section,
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 4]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
minimal encoding SHOULD be used resulting in no trailing zero octets in the
|
|
category bitmap.
|
|
|
|
octet 0 octet 1 octet 2 octet 3 octet 4 octet 5
|
|
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX . . .
|
|
bit 01234567 89111111 11112222 22222233 33333333 44444444
|
|
number 012345 67890123 45678901 23456789 01234567
|
|
|
|
Figure 4. Ordering of Bits in Tag 1 Bit Map
|
|
|
|
|
|
3.4.2.6 Optimized Tag 1 Format
|
|
|
|
Routers work most efficiently when processing fixed length fields. To
|
|
support these routers there is an optimized form of tag type 1. The format
|
|
does not change. The only change is to the category bitmap which is set to
|
|
a constant length of 10 octets. Trailing octets required to fill out the 10
|
|
octets are zero filled. Ten octets, allowing for 80 categories, was chosen
|
|
because it makes the total length of the CIPSO option 20 octets. If CIPSO
|
|
is the only option then the option will be full word aligned and additional
|
|
filler octets will not be required.
|
|
|
|
|
|
3.4.3 Tag Type 2
|
|
|
|
This is referred to as the "enumerated" tag type. It is used to describe
|
|
large but sparsely populated sets of categories. Tag type 2 is in the MAC
|
|
Sensitivity tag type class. The format of this tag type is as follows:
|
|
|
|
+----------+----------+----------+----------+-------------//-------------+
|
|
| 00000010 | LLLLLLLL | 00000000 | LLLLLLLL | CCCCCCCCCCCCCCCCCCCCCCCCCC |
|
|
+----------+----------+----------+----------+-------------//-------------+
|
|
|
|
TAG TAG ALIGNMENT SENSITIVITY ENUMERATED
|
|
TYPE LENGTH OCTET LEVEL CATEGORIES
|
|
|
|
Figure 5. Tag Type 2 Format
|
|
|
|
|
|
3.4.3.1 Tag Type
|
|
|
|
This field is one octet in length and has a value of 2.
|
|
|
|
|
|
3.4.3.2 Tag Length
|
|
|
|
This field is 1 octet in length. It is the total length of the tag type
|
|
including the type and length fields. With the current IP header length
|
|
restriction of 40 bytes the value within this field is between 4 and 34.
|
|
|
|
|
|
3.4.3.3 Alignment Octet
|
|
|
|
This field is 1 octet in length and always has the value of 0. Its purpose
|
|
is to align the category field on an even octet boundary. This will
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 5]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
speed many implementations including router implementations.
|
|
|
|
|
|
3.4.3.4 Sensitivity Level
|
|
|
|
This field is 1 octet in length. Its value is from 0 to 255. The values
|
|
are ordered with 0 being the minimum value and 255 representing the
|
|
maximum value.
|
|
|
|
|
|
3.4.3.5 Enumerated Categories
|
|
|
|
In this tag, categories are represented by their actual value rather than
|
|
by their position within a bit field. The length of each category is 2
|
|
octets. Up to 15 categories may be represented by this tag. Valid values
|
|
for categories are 0 to 65534. Category 65535 is not a valid category
|
|
value. The categories MUST be listed in ascending order within the tag.
|
|
|
|
|
|
3.4.4 Tag Type 5
|
|
|
|
This is referred to as the "range" tag type. It is used to represent
|
|
labels where all categories in a range, or set of ranges, are included
|
|
in the sensitivity label. Tag type 5 is in the MAC Sensitivity tag type
|
|
class. The format of this tag type is as follows:
|
|
|
|
+----------+----------+----------+----------+------------//-------------+
|
|
| 00000101 | LLLLLLLL | 00000000 | LLLLLLLL | Top/Bottom | Top/Bottom |
|
|
+----------+----------+----------+----------+------------//-------------+
|
|
|
|
TAG TAG ALIGNMENT SENSITIVITY CATEGORY RANGES
|
|
TYPE LENGTH OCTET LEVEL
|
|
|
|
Figure 6. Tag Type 5 Format
|
|
|
|
|
|
3.4.4.1 Tag Type
|
|
|
|
This field is one octet in length and has a value of 5.
|
|
|
|
|
|
3.4.4.2 Tag Length
|
|
|
|
This field is 1 octet in length. It is the total length of the tag type
|
|
including the type and length fields. With the current IP header length
|
|
restriction of 40 bytes the value within this field is between 4 and 34.
|
|
|
|
|
|
3.4.4.3 Alignment Octet
|
|
|
|
This field is 1 octet in length and always has the value of 0. Its purpose
|
|
is to align the category range field on an even octet boundary. This will
|
|
speed many implementations including router implementations.
|
|
|
|
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 6]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
3.4.4.4 Sensitivity Level
|
|
|
|
This field is 1 octet in length. Its value is from 0 to 255. The values
|
|
are ordered with 0 being the minimum value and 255 representing the maximum
|
|
value.
|
|
|
|
|
|
3.4.4.5 Category Ranges
|
|
|
|
A category range is a 4 octet field comprised of the 2 octet index of the
|
|
highest numbered category followed by the 2 octet index of the lowest
|
|
numbered category. These range endpoints are inclusive within the range of
|
|
categories. All categories within a range are included in the sensitivity
|
|
label. This tag may contain a maximum of 7 category pairs. The bottom
|
|
category endpoint for the last pair in the tag MAY be omitted and SHOULD be
|
|
assumed to be 0. The ranges MUST be non-overlapping and be listed in
|
|
descending order. Valid values for categories are 0 to 65534. Category
|
|
65535 is not a valid category value.
|
|
|
|
|
|
3.4.5 Minimum Requirements
|
|
|
|
A CIPSO implementation MUST be capable of generating at least tag type 1 in
|
|
the non-optimized form. In addition, a CIPSO implementation MUST be able
|
|
to receive any valid tag type 1 even those using the optimized tag type 1
|
|
format.
|
|
|
|
|
|
4. Configuration Parameters
|
|
|
|
The configuration parameters defined below are required for all CIPSO hosts,
|
|
gateways, and routers that support multiple sensitivity labels. A CIPSO
|
|
host is defined to be the origination or destination system for an IP
|
|
datagram. A CIPSO gateway provides IP routing services between two or more
|
|
IP networks and may be required to perform label translations between
|
|
networks. A CIPSO gateway may be an enhanced CIPSO host or it may just
|
|
provide gateway services with no end system CIPSO capabilities. A CIPSO
|
|
router is a dedicated IP router that routes IP datagrams between two or more
|
|
IP networks.
|
|
|
|
An implementation of CIPSO on a host MUST have the capability to reject a
|
|
datagram for reasons that the information contained can not be adequately
|
|
protected by the receiving host or if acceptance may result in violation of
|
|
the host or network security policy. In addition, a CIPSO gateway or router
|
|
MUST be able to reject datagrams going to networks that can not provide
|
|
adequate protection or may violate the network's security policy. To
|
|
provide this capability the following minimal set of configuration
|
|
parameters are required for CIPSO implementations:
|
|
|
|
HOST_LABEL_MAX - This parameter contains the maximum sensitivity label that
|
|
a CIPSO host is authorized to handle. All datagrams that have a label
|
|
greater than this maximum MUST be rejected by the CIPSO host. This
|
|
parameter does not apply to CIPSO gateways or routers. This parameter need
|
|
not be defined explicitly as it can be implicitly derived from the
|
|
PORT_LABEL_MAX parameters for the associated interfaces.
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 7]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
|
|
HOST_LABEL_MIN - This parameter contains the minimum sensitivity label that
|
|
a CIPSO host is authorized to handle. All datagrams that have a label less
|
|
than this minimum MUST be rejected by the CIPSO host. This parameter does
|
|
not apply to CIPSO gateways or routers. This parameter need not be defined
|
|
explicitly as it can be implicitly derived from the PORT_LABEL_MIN
|
|
parameters for the associated interfaces.
|
|
|
|
PORT_LABEL_MAX - This parameter contains the maximum sensitivity label for
|
|
all datagrams that may exit a particular network interface port. All
|
|
outgoing datagrams that have a label greater than this maximum MUST be
|
|
rejected by the CIPSO system. The label within this parameter MUST be
|
|
less than or equal to the label within the HOST_LABEL_MAX parameter. This
|
|
parameter does not apply to CIPSO hosts that support only one network port.
|
|
|
|
PORT_LABEL_MIN - This parameter contains the minimum sensitivity label for
|
|
all datagrams that may exit a particular network interface port. All
|
|
outgoing datagrams that have a label less than this minimum MUST be
|
|
rejected by the CIPSO system. The label within this parameter MUST be
|
|
greater than or equal to the label within the HOST_LABEL_MIN parameter.
|
|
This parameter does not apply to CIPSO hosts that support only one network
|
|
port.
|
|
|
|
PORT_DOI - This parameter is used to assign a DOI identifier value to a
|
|
particular network interface port. All CIPSO labels within datagrams
|
|
going out this port MUST use the specified DOI identifier. All CIPSO
|
|
hosts and gateways MUST support either this parameter, the NET_DOI
|
|
parameter, or the HOST_DOI parameter.
|
|
|
|
NET_DOI - This parameter is used to assign a DOI identifier value to a
|
|
particular IP network address. All CIPSO labels within datagrams destined
|
|
for the particular IP network MUST use the specified DOI identifier. All
|
|
CIPSO hosts and gateways MUST support either this parameter, the PORT_DOI
|
|
parameter, or the HOST_DOI parameter.
|
|
|
|
HOST_DOI - This parameter is used to assign a DOI identifier value to a
|
|
particular IP host address. All CIPSO labels within datagrams destined for
|
|
the particular IP host will use the specified DOI identifier. All CIPSO
|
|
hosts and gateways MUST support either this parameter, the PORT_DOI
|
|
parameter, or the NET_DOI parameter.
|
|
|
|
This list represents the minimal set of configuration parameters required
|
|
to be compliant. Implementors are encouraged to add to this list to
|
|
provide enhanced functionality and control. For example, many security
|
|
policies may require both incoming and outgoing datagrams be checked against
|
|
the port and host label ranges.
|
|
|
|
|
|
4.1 Port Range Parameters
|
|
|
|
The labels represented by the PORT_LABEL_MAX and PORT_LABEL_MIN parameters
|
|
MAY be in CIPSO or local format. Some CIPSO systems, such as routers, may
|
|
want to have the range parameters expressed in CIPSO format so that incoming
|
|
labels do not have to be converted to a local format before being compared
|
|
against the range. If multiple DOIs are supported by one of these CIPSO
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 8]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
systems then multiple port range parameters would be needed, one set for
|
|
each DOI supported on a particular port.
|
|
|
|
The port range will usually represent the total set of labels that may
|
|
exist on the logical network accessed through the corresponding network
|
|
interface. It may, however, represent a subset of these labels that are
|
|
allowed to enter the CIPSO system.
|
|
|
|
|
|
4.2 Single Label CIPSO Hosts
|
|
|
|
CIPSO implementations that support only one label are not required to
|
|
support the parameters described above. These limited implementations are
|
|
only required to support a NET_LABEL parameter. This parameter contains
|
|
the CIPSO label that may be inserted in datagrams that exit the host. In
|
|
addition, the host MUST reject any incoming datagram that has a label which
|
|
is not equivalent to the NET_LABEL parameter.
|
|
|
|
|
|
5. Handling Procedures
|
|
|
|
This section describes the processing requirements for incoming and
|
|
outgoing IP datagrams. Just providing the correct CIPSO label format
|
|
is not enough. Assumptions will be made by one system on how a
|
|
receiving system will handle the CIPSO label. Wrong assumptions may
|
|
lead to non-interoperability or even a security incident. The
|
|
requirements described below represent the minimal set needed for
|
|
interoperability and that provide users some level of confidence.
|
|
Many other requirements could be added to increase user confidence,
|
|
however at the risk of restricting creativity and limiting vendor
|
|
participation.
|
|
|
|
|
|
5.1 Input Procedures
|
|
|
|
All datagrams received through a network port MUST have a security label
|
|
associated with them, either contained in the datagram or assigned to the
|
|
receiving port. Without this label the host, gateway, or router will not
|
|
have the information it needs to make security decisions. This security
|
|
label will be obtained from the CIPSO if the option is present in the
|
|
datagram. See section 4.1.2 for handling procedures for unlabeled
|
|
datagrams. This label will be compared against the PORT (if appropriate)
|
|
and HOST configuration parameters defined in section 3.
|
|
|
|
If any field within the CIPSO option, such as the DOI identifier, is not
|
|
recognized the IP datagram is discarded and an ICMP "parameter problem"
|
|
(type 12) is generated and returned. The ICMP code field is set to "bad
|
|
parameter" (code 0) and the pointer is set to the start of the CIPSO field
|
|
that is unrecognized.
|
|
|
|
If the contents of the CIPSO are valid but the security label is
|
|
outside of the configured host or port label range, the datagram is
|
|
discarded and an ICMP "destination unreachable" (type 3) is generated
|
|
and returned. The code field of the ICMP is set to "communication with
|
|
destination network administratively prohibited" (code 9) or to
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 9]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
"communication with destination host administratively prohibited"
|
|
(code 10). The value of the code field used is dependent upon whether
|
|
the originator of the ICMP message is acting as a CIPSO host or a CIPSO
|
|
gateway. The recipient of the ICMP message MUST be able to handle either
|
|
value. The same procedure is performed if a CIPSO can not be added to an
|
|
IP packet because it is too large to fit in the IP options area.
|
|
|
|
If the error is triggered by receipt of an ICMP message, the message
|
|
is discarded and no response is permitted (consistent with general ICMP
|
|
processing rules).
|
|
|
|
|
|
5.1.1 Unrecognized tag types
|
|
|
|
The default condition for any CIPSO implementation is that an
|
|
unrecognized tag type MUST be treated as a "parameter problem" and
|
|
handled as described in section 4.1. A CIPSO implementation MAY allow
|
|
the system administrator to identify tag types that may safely be
|
|
ignored. This capability is an allowable enhancement, not a
|
|
requirement.
|
|
|
|
|
|
5.1.2 Unlabeled Packets
|
|
|
|
A network port may be configured to not require a CIPSO label for all
|
|
incoming datagrams. For this configuration a CIPSO label must be
|
|
assigned to that network port and associated with all unlabeled IP
|
|
datagrams. This capability might be used for single level networks or
|
|
networks that have CIPSO and non-CIPSO hosts and the non-CIPSO hosts
|
|
all operate at the same label.
|
|
|
|
If a CIPSO option is required and none is found, the datagram is
|
|
discarded and an ICMP "parameter problem" (type 12) is generated and
|
|
returned to the originator of the datagram. The code field of the ICMP
|
|
is set to "option missing" (code 1) and the ICMP pointer is set to 134
|
|
(the value of the option type for the missing CIPSO option).
|
|
|
|
|
|
5.2 Output Procedures
|
|
|
|
A CIPSO option MUST appear only once in a datagram. Only one tag type
|
|
from the MAC Sensitivity class MAY be included in a CIPSO option. Given
|
|
the current set of defined tag types, this means that CIPSO labels at
|
|
first will contain only one tag.
|
|
|
|
All datagrams leaving a CIPSO system MUST meet the following condition:
|
|
|
|
PORT_LABEL_MIN <= CIPSO label <= PORT_LABEL_MAX
|
|
|
|
If this condition is not satisfied the datagram MUST be discarded.
|
|
If the CIPSO system only supports one port, the HOST_LABEL_MIN and the
|
|
HOST_LABEL_MAX parameters MAY be substituted for the PORT parameters in
|
|
the above condition.
|
|
|
|
The DOI identifier to be used for all outgoing datagrams is configured by
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 10]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
the administrator. If port level DOI identifier assignment is used, then
|
|
the PORT_DOI configuration parameter MUST contain the DOI identifier to
|
|
use. If network level DOI assignment is used, then the NET_DOI parameter
|
|
MUST contain the DOI identifier to use. And if host level DOI assignment
|
|
is employed, then the HOST_DOI parameter MUST contain the DOI identifier
|
|
to use. A CIPSO implementation need only support one level of DOI
|
|
assignment.
|
|
|
|
|
|
5.3 DOI Processing Requirements
|
|
|
|
A CIPSO implementation MUST support at least one DOI and SHOULD support
|
|
multiple DOIs. System and network administrators are cautioned to
|
|
ensure that at least one DOI is common within an IP network to allow for
|
|
broadcasting of IP datagrams.
|
|
|
|
CIPSO gateways MUST be capable of translating a CIPSO option from one
|
|
DOI to another when forwarding datagrams between networks. For
|
|
efficiency purposes this capability is only a desired feature for CIPSO
|
|
routers.
|
|
|
|
|
|
5.4 Label of ICMP Messages
|
|
|
|
The CIPSO label to be used on all outgoing ICMP messages MUST be equivalent
|
|
to the label of the datagram that caused the ICMP message. If the ICMP was
|
|
generated due to a problem associated with the original CIPSO label then the
|
|
following responses are allowed:
|
|
|
|
a. Use the CIPSO label of the original IP datagram
|
|
b. Drop the original datagram with no return message generated
|
|
|
|
In most cases these options will have the same effect. If you can not
|
|
interpret the label or if it is outside the label range of your host or
|
|
interface then an ICMP message with the same label will probably not be
|
|
able to exit the system.
|
|
|
|
|
|
6. Assignment of DOI Identifier Numbers =
|
|
|
|
Requests for assignment of a DOI identifier number should be addressed to
|
|
the Internet Assigned Numbers Authority (IANA).
|
|
|
|
|
|
7. Acknowledgements
|
|
|
|
Much of the material in this RFC is based on (and copied from) work
|
|
done by Gary Winiger of Sun Microsystems and published as Commercial
|
|
IP Security Option at the INTEROP 89, Commercial IPSO Workshop.
|
|
|
|
|
|
8. Author's Address
|
|
|
|
To submit mail for distribution to members of the IETF CIPSO Working
|
|
Group, send mail to: cipso@wdl1.wdl.loral.com.
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 11]
|
|
|
|
|
|
|
|
CIPSO INTERNET DRAFT 16 July, 1992
|
|
|
|
|
|
|
|
|
|
To be added to or deleted from this distribution, send mail to:
|
|
cipso-request@wdl1.wdl.loral.com.
|
|
|
|
|
|
9. References
|
|
|
|
RFC 1038, "Draft Revised IP Security Option", M. St. Johns, IETF, January
|
|
1988.
|
|
|
|
RFC 1108, "U.S. Department of Defense Security Options
|
|
for the Internet Protocol", Stephen Kent, IAB, 1 March, 1991.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internet Draft, Expires 15 Jan 93 [PAGE 12]
|
|
|
|
|
|
|