1076 строки
27 KiB
C
1076 строки
27 KiB
C
/*
|
|
net-3-driver for the IBM LAN Adapter/A
|
|
|
|
This is an extension to the Linux operating system, and is covered by the
|
|
same GNU General Public License that covers that work.
|
|
|
|
Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de,
|
|
alfred.arnold@lancom.de)
|
|
|
|
This driver is based both on the SK_MCA driver, which is itself based on the
|
|
SK_G16 and 3C523 driver.
|
|
|
|
paper sources:
|
|
'PC Hardware: Aufbau, Funktionsweise, Programmierung' by
|
|
Hans-Peter Messmer for the basic Microchannel stuff
|
|
|
|
'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer
|
|
for help on Ethernet driver programming
|
|
|
|
'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National
|
|
Semiconductor for info on the MAC chip
|
|
|
|
'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
|
|
Document Number SC30-3661-00' by IBM for info on the adapter itself
|
|
|
|
Also see http://www.national.com/analog
|
|
|
|
special acknowledgements to:
|
|
- Bob Eager for helping me out with documentation from IBM
|
|
- Jim Shorney for his endless patience with me while I was using
|
|
him as a beta tester to trace down the address filter bug ;-)
|
|
|
|
Missing things:
|
|
|
|
-> set debug level via ioctl instead of compile-time switches
|
|
-> I didn't follow the development of the 2.1.x kernels, so my
|
|
assumptions about which things changed with which kernel version
|
|
are probably nonsense
|
|
|
|
History:
|
|
Nov 6th, 1999
|
|
startup from SK_MCA driver
|
|
Dec 6th, 1999
|
|
finally got docs about the card. A big thank you to Bob Eager!
|
|
Dec 12th, 1999
|
|
first packet received
|
|
Dec 13th, 1999
|
|
recv queue done, tcpdump works
|
|
Dec 15th, 1999
|
|
transmission part works
|
|
Dec 28th, 1999
|
|
added usage of the isa_functions for Linux 2.3 . Things should
|
|
still work with 2.0.x....
|
|
Jan 28th, 2000
|
|
in Linux 2.2.13, the version.h file mysteriously didn't get
|
|
included. Added a workaround for this. Furthermore, it now
|
|
not only compiles as a modules ;-)
|
|
Jan 30th, 2000
|
|
newer kernels automatically probe more than one board, so the
|
|
'startslot' as a variable is also needed here
|
|
Apr 12th, 2000
|
|
the interrupt mask register is not set 'hard' instead of individually
|
|
setting registers, since this seems to set bits that shouldn't be
|
|
set
|
|
May 21st, 2000
|
|
reset interrupt status immediately after CAM load
|
|
add a recovery delay after releasing the chip's reset line
|
|
May 24th, 2000
|
|
finally found the bug in the address filter setup - damned signed
|
|
chars!
|
|
June 1st, 2000
|
|
corrected version codes, added support for the latest 2.3 changes
|
|
Oct 28th, 2002
|
|
cleaned up for the 2.5 tree <alan@lxorguk.ukuu.org.uk>
|
|
|
|
*************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/time.h>
|
|
#include <linux/mca.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
|
|
#define _IBM_LANA_DRIVER_
|
|
#include "ibmlana.h"
|
|
|
|
#undef DEBUG
|
|
|
|
#define DRV_NAME "ibmlana"
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* global static data - not more since we can handle multiple boards and
|
|
* have to pack all state info into the device struct!
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
static char *MediaNames[Media_Count] = {
|
|
"10BaseT", "10Base5", "Unknown", "10Base2"
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* private subfunctions
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
#ifdef DEBUG
|
|
/* dump all registers */
|
|
|
|
static void dumpregs(struct net_device *dev)
|
|
{
|
|
int z;
|
|
|
|
for (z = 0; z < 160; z += 2) {
|
|
if (!(z & 15))
|
|
printk("REGS: %04x:", z);
|
|
printk(" %04x", inw(dev->base_addr + z));
|
|
if ((z & 15) == 14)
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
/* dump parts of shared memory - only needed during debugging */
|
|
|
|
static void dumpmem(struct net_device *dev, u32 start, u32 len)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int z;
|
|
|
|
printk("Address %04x:\n", start);
|
|
for (z = 0; z < len; z++) {
|
|
if ((z & 15) == 0)
|
|
printk("%04x:", z);
|
|
printk(" %02x", readb(priv->base + start + z));
|
|
if ((z & 15) == 15)
|
|
printk("\n");
|
|
}
|
|
if ((z & 15) != 0)
|
|
printk("\n");
|
|
}
|
|
|
|
/* print exact time - ditto */
|
|
|
|
static void PrTime(void)
|
|
{
|
|
struct timeval tv;
|
|
|
|
do_gettimeofday(&tv);
|
|
printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec);
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
/* deduce resources out of POS registers */
|
|
|
|
static void getaddrs(struct mca_device *mdev, int *base, int *memlen,
|
|
int *iobase, int *irq, ibmlana_medium *medium)
|
|
{
|
|
u_char pos0, pos1;
|
|
|
|
pos0 = mca_device_read_stored_pos(mdev, 2);
|
|
pos1 = mca_device_read_stored_pos(mdev, 3);
|
|
|
|
*base = 0xc0000 + ((pos1 & 0xf0) << 9);
|
|
*memlen = (pos1 & 0x01) ? 0x8000 : 0x4000;
|
|
*iobase = (pos0 & 0xe0) << 7;
|
|
switch (pos0 & 0x06) {
|
|
case 0:
|
|
*irq = 5;
|
|
break;
|
|
case 2:
|
|
*irq = 15;
|
|
break;
|
|
case 4:
|
|
*irq = 10;
|
|
break;
|
|
case 6:
|
|
*irq = 11;
|
|
break;
|
|
}
|
|
*medium = (pos0 & 0x18) >> 3;
|
|
}
|
|
|
|
/* wait on register value with mask and timeout */
|
|
|
|
static int wait_timeout(struct net_device *dev, int regoffs, u16 mask,
|
|
u16 value, int timeout)
|
|
{
|
|
unsigned long fin = jiffies + timeout;
|
|
|
|
while (time_before(jiffies,fin))
|
|
if ((inw(dev->base_addr + regoffs) & mask) == value)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* reset the whole board */
|
|
|
|
static void ResetBoard(struct net_device *dev)
|
|
{
|
|
unsigned char bcmval;
|
|
|
|
/* read original board control value */
|
|
|
|
bcmval = inb(dev->base_addr + BCMREG);
|
|
|
|
/* set reset bit for a while */
|
|
|
|
bcmval |= BCMREG_RESET;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
udelay(10);
|
|
bcmval &= ~BCMREG_RESET;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
|
|
/* switch over to RAM again */
|
|
|
|
bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
}
|
|
|
|
/* calculate RAM layout & set up descriptors in RAM */
|
|
|
|
static void InitDscrs(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
u32 addr, baddr, raddr;
|
|
int z;
|
|
tda_t tda;
|
|
rda_t rda;
|
|
rra_t rra;
|
|
|
|
/* initialize RAM */
|
|
|
|
memset_io(priv->base, 0xaa,
|
|
dev->mem_start - dev->mem_start); /* XXX: typo? */
|
|
|
|
/* setup n TX descriptors - independent of RAM size */
|
|
|
|
priv->tdastart = addr = 0;
|
|
priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT;
|
|
for (z = 0; z < TXBUFCNT; z++) {
|
|
tda.status = 0;
|
|
tda.config = 0;
|
|
tda.length = 0;
|
|
tda.fragcount = 1;
|
|
tda.startlo = baddr;
|
|
tda.starthi = 0;
|
|
tda.fraglength = 0;
|
|
if (z == TXBUFCNT - 1)
|
|
tda.link = priv->tdastart;
|
|
else
|
|
tda.link = addr + sizeof(tda_t);
|
|
tda.link |= 1;
|
|
memcpy_toio(priv->base + addr, &tda, sizeof(tda_t));
|
|
addr += sizeof(tda_t);
|
|
baddr += PKTSIZE;
|
|
}
|
|
|
|
/* calculate how many receive buffers fit into remaining memory */
|
|
|
|
priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE);
|
|
|
|
/* calculate receive addresses */
|
|
|
|
priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE);
|
|
priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t));
|
|
priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t));
|
|
|
|
for (z = 0; z < priv->rxbufcnt; z++) {
|
|
rra.startlo = baddr;
|
|
rra.starthi = 0;
|
|
rra.cntlo = PKTSIZE >> 1;
|
|
rra.cnthi = 0;
|
|
memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t));
|
|
|
|
rda.status = 0;
|
|
rda.length = 0;
|
|
rda.startlo = 0;
|
|
rda.starthi = 0;
|
|
rda.seqno = 0;
|
|
if (z < priv->rxbufcnt - 1)
|
|
rda.link = addr + sizeof(rda_t);
|
|
else
|
|
rda.link = 1;
|
|
rda.inuse = 1;
|
|
memcpy_toio(priv->base + addr, &rda, sizeof(rda_t));
|
|
|
|
baddr += PKTSIZE;
|
|
raddr += sizeof(rra_t);
|
|
addr += sizeof(rda_t);
|
|
}
|
|
|
|
/* initialize current pointers */
|
|
|
|
priv->nextrxdescr = 0;
|
|
priv->lastrxdescr = priv->rxbufcnt - 1;
|
|
priv->nexttxdescr = 0;
|
|
priv->currtxdescr = 0;
|
|
priv->txusedcnt = 0;
|
|
memset(priv->txused, 0, sizeof(priv->txused));
|
|
}
|
|
|
|
/* set up Rx + Tx descriptors in SONIC */
|
|
|
|
static int InitSONIC(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* set up start & end of resource area */
|
|
|
|
outw(0, SONIC_URRA);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RSA);
|
|
outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RRP);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RWP);
|
|
|
|
/* set EOBC so that only one packet goes into one buffer */
|
|
|
|
outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC);
|
|
|
|
/* let SONIC read the first RRA descriptor */
|
|
|
|
outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG);
|
|
if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) {
|
|
printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name);
|
|
return 0;
|
|
}
|
|
|
|
/* point SONIC to the first RDA */
|
|
|
|
outw(0, dev->base_addr + SONIC_URDA);
|
|
outw(priv->rdastart, dev->base_addr + SONIC_CRDA);
|
|
|
|
/* set upper half of TDA address */
|
|
|
|
outw(0, dev->base_addr + SONIC_UTDA);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* stop SONIC so we can reinitialize it */
|
|
|
|
static void StopSONIC(struct net_device *dev)
|
|
{
|
|
/* disable interrupts */
|
|
|
|
outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG);
|
|
outb(0, dev->base_addr + SONIC_IMREG);
|
|
|
|
/* reset the SONIC */
|
|
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
|
|
/* initialize card and SONIC for proper operation */
|
|
|
|
static void putcam(camentry_t * cams, int *camcnt, char *addr)
|
|
{
|
|
camentry_t *pcam = cams + (*camcnt);
|
|
u8 *uaddr = (u8 *) addr;
|
|
|
|
pcam->index = *camcnt;
|
|
pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0];
|
|
pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2];
|
|
pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4];
|
|
(*camcnt)++;
|
|
}
|
|
|
|
static void InitBoard(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int camcnt;
|
|
camentry_t cams[16];
|
|
u32 cammask;
|
|
struct netdev_hw_addr *ha;
|
|
u16 rcrval;
|
|
|
|
/* reset the SONIC */
|
|
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
|
|
/* clear all spurious interrupts */
|
|
|
|
outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG);
|
|
|
|
/* set up the SONIC's bus interface - constant for this adapter -
|
|
must be done while the SONIC is in reset */
|
|
|
|
outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG);
|
|
outw(0, dev->base_addr + SONIC_DCREG2);
|
|
|
|
/* remove reset form the SONIC */
|
|
|
|
outw(0, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
|
|
/* data sheet requires URRA to be programmed before setting up the CAM contents */
|
|
|
|
outw(0, dev->base_addr + SONIC_URRA);
|
|
|
|
/* program the CAM entry 0 to the device address */
|
|
|
|
camcnt = 0;
|
|
putcam(cams, &camcnt, dev->dev_addr);
|
|
|
|
/* start putting the multicast addresses into the CAM list. Stop if
|
|
it is full. */
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
putcam(cams, &camcnt, ha->addr);
|
|
if (camcnt == 16)
|
|
break;
|
|
}
|
|
|
|
/* calculate CAM mask */
|
|
|
|
cammask = (1 << camcnt) - 1;
|
|
|
|
/* feed CDA into SONIC, initialize RCR value (always get broadcasts) */
|
|
|
|
memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt);
|
|
memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask));
|
|
|
|
#ifdef DEBUG
|
|
printk("CAM setup:\n");
|
|
dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask));
|
|
#endif
|
|
|
|
outw(0, dev->base_addr + SONIC_CAMPTR);
|
|
outw(camcnt, dev->base_addr + SONIC_CAMCNT);
|
|
outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG);
|
|
if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) {
|
|
printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name);
|
|
return;
|
|
} else {
|
|
/* clear interrupt condition */
|
|
|
|
outw(ISREG_LCD, dev->base_addr + SONIC_ISREG);
|
|
|
|
#ifdef DEBUG
|
|
printk("Loading CAM done, address pointers %04x:%04x\n",
|
|
inw(dev->base_addr + SONIC_URRA),
|
|
inw(dev->base_addr + SONIC_CAMPTR));
|
|
{
|
|
int z;
|
|
|
|
printk("\n-->CAM: PTR %04x CNT %04x\n",
|
|
inw(dev->base_addr + SONIC_CAMPTR),
|
|
inw(dev->base_addr + SONIC_CAMCNT));
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
for (z = 0; z < camcnt; z++) {
|
|
outw(z, dev->base_addr + SONIC_CAMEPTR);
|
|
printk("Entry %d: %04x %04x %04x\n", z,
|
|
inw(dev->base_addr + SONIC_CAMADDR0),
|
|
inw(dev->base_addr + SONIC_CAMADDR1),
|
|
inw(dev->base_addr + SONIC_CAMADDR2));
|
|
}
|
|
outw(0, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
rcrval = RCREG_BRD | RCREG_LB_NONE;
|
|
|
|
/* if still multicast addresses left or ALLMULTI is set, set the multicast
|
|
enable bit */
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt)
|
|
rcrval |= RCREG_AMC;
|
|
|
|
/* promiscuous mode ? */
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
rcrval |= RCREG_PRO;
|
|
|
|
/* program receive mode */
|
|
|
|
outw(rcrval, dev->base_addr + SONIC_RCREG);
|
|
#ifdef DEBUG
|
|
printk("\nRCRVAL: %04x\n", rcrval);
|
|
#endif
|
|
|
|
/* set up descriptors in shared memory + feed them into SONIC registers */
|
|
|
|
InitDscrs(dev);
|
|
if (!InitSONIC(dev))
|
|
return;
|
|
|
|
/* reset all pending interrupts */
|
|
|
|
outw(0xffff, dev->base_addr + SONIC_ISREG);
|
|
|
|
/* enable transmitter + receiver interrupts */
|
|
|
|
outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG);
|
|
outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG);
|
|
|
|
/* turn on card interrupts */
|
|
|
|
outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG);
|
|
|
|
#ifdef DEBUG
|
|
printk("Register dump after initialization:\n");
|
|
dumpregs(dev);
|
|
#endif
|
|
}
|
|
|
|
/* start transmission of a descriptor */
|
|
|
|
static void StartTx(struct net_device *dev, int descr)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int addr;
|
|
|
|
addr = priv->tdastart + (descr * sizeof(tda_t));
|
|
|
|
/* put descriptor address into SONIC */
|
|
|
|
outw(addr, dev->base_addr + SONIC_CTDA);
|
|
|
|
/* trigger transmitter */
|
|
|
|
priv->currtxdescr = descr;
|
|
outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* interrupt handler(s)
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
/* receive buffer area exhausted */
|
|
|
|
static void irqrbe_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* point the SONIC back to the RRA start */
|
|
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RRP);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RWP);
|
|
}
|
|
|
|
/* receive interrupt */
|
|
|
|
static void irqrx_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
rda_t rda;
|
|
u32 rdaaddr, lrdaaddr;
|
|
|
|
/* loop until ... */
|
|
|
|
while (1) {
|
|
/* read descriptor that was next to be filled by SONIC */
|
|
|
|
rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t));
|
|
lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t));
|
|
memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t));
|
|
|
|
/* iron out upper word halves of fields we use - SONIC will duplicate
|
|
bits 0..15 to 16..31 */
|
|
|
|
rda.status &= 0xffff;
|
|
rda.length &= 0xffff;
|
|
rda.startlo &= 0xffff;
|
|
|
|
/* stop if the SONIC still owns it, i.e. there is no data for us */
|
|
|
|
if (rda.inuse)
|
|
break;
|
|
|
|
/* good packet? */
|
|
|
|
else if (rda.status & RCREG_PRX) {
|
|
struct sk_buff *skb;
|
|
|
|
/* fetch buffer */
|
|
|
|
skb = dev_alloc_skb(rda.length + 2);
|
|
if (skb == NULL)
|
|
dev->stats.rx_dropped++;
|
|
else {
|
|
/* copy out data */
|
|
|
|
memcpy_fromio(skb_put(skb, rda.length),
|
|
priv->base +
|
|
rda.startlo, rda.length);
|
|
|
|
/* set up skb fields */
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
/* bookkeeping */
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += rda.length;
|
|
|
|
/* pass to the upper layers */
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
/* otherwise check error status bits and increase statistics */
|
|
|
|
else {
|
|
dev->stats.rx_errors++;
|
|
if (rda.status & RCREG_FAER)
|
|
dev->stats.rx_frame_errors++;
|
|
if (rda.status & RCREG_CRCR)
|
|
dev->stats.rx_crc_errors++;
|
|
}
|
|
|
|
/* descriptor processed, will become new last descriptor in queue */
|
|
|
|
rda.link = 1;
|
|
rda.inuse = 1;
|
|
memcpy_toio(priv->base + rdaaddr, &rda,
|
|
sizeof(rda_t));
|
|
|
|
/* set up link and EOL = 0 in currently last descriptor. Only write
|
|
the link field since the SONIC may currently already access the
|
|
other fields. */
|
|
|
|
memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4);
|
|
|
|
/* advance indices */
|
|
|
|
priv->lastrxdescr = priv->nextrxdescr;
|
|
if ((++priv->nextrxdescr) >= priv->rxbufcnt)
|
|
priv->nextrxdescr = 0;
|
|
}
|
|
}
|
|
|
|
/* transmit interrupt */
|
|
|
|
static void irqtx_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
tda_t tda;
|
|
|
|
/* fetch descriptor (we forgot the size ;-) */
|
|
memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t));
|
|
|
|
/* update statistics */
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += tda.length;
|
|
|
|
/* update our pointers */
|
|
priv->txused[priv->currtxdescr] = 0;
|
|
priv->txusedcnt--;
|
|
|
|
/* if there are more descriptors present in RAM, start them */
|
|
if (priv->txusedcnt > 0)
|
|
StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT);
|
|
|
|
/* tell the upper layer we can go on transmitting */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void irqtxerr_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
tda_t tda;
|
|
|
|
/* fetch descriptor to check status */
|
|
memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t));
|
|
|
|
/* update statistics */
|
|
dev->stats.tx_errors++;
|
|
if (tda.status & (TCREG_NCRS | TCREG_CRSL))
|
|
dev->stats.tx_carrier_errors++;
|
|
if (tda.status & TCREG_EXC)
|
|
dev->stats.tx_aborted_errors++;
|
|
if (tda.status & TCREG_OWC)
|
|
dev->stats.tx_window_errors++;
|
|
if (tda.status & TCREG_FU)
|
|
dev->stats.tx_fifo_errors++;
|
|
|
|
/* update our pointers */
|
|
priv->txused[priv->currtxdescr] = 0;
|
|
priv->txusedcnt--;
|
|
|
|
/* if there are more descriptors present in RAM, start them */
|
|
if (priv->txusedcnt > 0)
|
|
StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT);
|
|
|
|
/* tell the upper layer we can go on transmitting */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* general interrupt entry */
|
|
|
|
static irqreturn_t irq_handler(int dummy, void *device)
|
|
{
|
|
struct net_device *dev = device;
|
|
u16 ival;
|
|
|
|
/* in case we're not meant... */
|
|
if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND))
|
|
return IRQ_NONE;
|
|
|
|
/* loop through the interrupt bits until everything is clear */
|
|
while (1) {
|
|
ival = inw(dev->base_addr + SONIC_ISREG);
|
|
|
|
if (ival & ISREG_RBE) {
|
|
irqrbe_handler(dev);
|
|
outw(ISREG_RBE, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_PKTRX) {
|
|
irqrx_handler(dev);
|
|
outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_TXDN) {
|
|
irqtx_handler(dev);
|
|
outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_TXER) {
|
|
irqtxerr_handler(dev);
|
|
outw(ISREG_TXER, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
break;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* driver methods
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
/* MCA info */
|
|
|
|
#if 0 /* info available elsewhere, but this is kept for reference */
|
|
static int ibmlana_getinfo(char *buf, int slot, void *d)
|
|
{
|
|
int len = 0, i;
|
|
struct net_device *dev = (struct net_device *) d;
|
|
ibmlana_priv *priv;
|
|
|
|
/* can't say anything about an uninitialized device... */
|
|
|
|
if (dev == NULL)
|
|
return len;
|
|
priv = netdev_priv(dev);
|
|
|
|
/* print info */
|
|
|
|
len += sprintf(buf + len, "IRQ: %d\n", priv->realirq);
|
|
len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr);
|
|
len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1);
|
|
len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]);
|
|
len += sprintf(buf + len, "Device: %s\n", dev->name);
|
|
len += sprintf(buf + len, "MAC address:");
|
|
for (i = 0; i < 6; i++)
|
|
len += sprintf(buf + len, " %02x", dev->dev_addr[i]);
|
|
buf[len++] = '\n';
|
|
buf[len] = 0;
|
|
|
|
return len;
|
|
}
|
|
#endif
|
|
|
|
/* open driver. Means also initialization and start of LANCE */
|
|
|
|
static int ibmlana_open(struct net_device *dev)
|
|
{
|
|
int result;
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* register resources - only necessary for IRQ */
|
|
|
|
result = request_irq(priv->realirq, irq_handler, IRQF_SHARED,
|
|
dev->name, dev);
|
|
if (result != 0) {
|
|
printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
|
|
return result;
|
|
}
|
|
dev->irq = priv->realirq;
|
|
|
|
/* set up the card and SONIC */
|
|
InitBoard(dev);
|
|
|
|
/* initialize operational flags */
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* close driver. Shut down board and free allocated resources */
|
|
|
|
static int ibmlana_close(struct net_device *dev)
|
|
{
|
|
/* turn off board */
|
|
|
|
/* release resources */
|
|
if (dev->irq != 0)
|
|
free_irq(dev->irq, dev);
|
|
dev->irq = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* transmit a block. */
|
|
|
|
static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int tmplen, addr;
|
|
unsigned long flags;
|
|
tda_t tda;
|
|
int baddr;
|
|
|
|
/* find out if there are free slots for a frame to transmit. If not,
|
|
the upper layer is in deep desperation and we simply ignore the frame. */
|
|
|
|
if (priv->txusedcnt >= TXBUFCNT) {
|
|
dev->stats.tx_dropped++;
|
|
goto tx_done;
|
|
}
|
|
|
|
/* copy the frame data into the next free transmit buffer - fillup missing */
|
|
tmplen = skb->len;
|
|
if (tmplen < 60)
|
|
tmplen = 60;
|
|
baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE);
|
|
memcpy_toio(priv->base + baddr, skb->data, skb->len);
|
|
|
|
/* copy filler into RAM - in case we're filling up...
|
|
we're filling a bit more than necessary, but that doesn't harm
|
|
since the buffer is far larger...
|
|
Sorry Linus for the filler string but I couldn't resist ;-) */
|
|
|
|
if (tmplen > skb->len) {
|
|
char *fill = "NetBSD is a nice OS too! ";
|
|
unsigned int destoffs = skb->len, l = strlen(fill);
|
|
|
|
while (destoffs < tmplen) {
|
|
memcpy_toio(priv->base + baddr + destoffs, fill, l);
|
|
destoffs += l;
|
|
}
|
|
}
|
|
|
|
/* set up the new frame descriptor */
|
|
addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t));
|
|
memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t));
|
|
tda.length = tda.fraglength = tmplen;
|
|
memcpy_toio(priv->base + addr, &tda, sizeof(tda_t));
|
|
|
|
/* if there were no active descriptors, trigger the SONIC */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
priv->txusedcnt++;
|
|
priv->txused[priv->nexttxdescr] = 1;
|
|
|
|
/* are all transmission slots used up ? */
|
|
if (priv->txusedcnt >= TXBUFCNT)
|
|
netif_stop_queue(dev);
|
|
|
|
if (priv->txusedcnt == 1)
|
|
StartTx(dev, priv->nexttxdescr);
|
|
priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
tx_done:
|
|
dev_kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* switch receiver mode. */
|
|
|
|
static void ibmlana_set_multicast_list(struct net_device *dev)
|
|
{
|
|
/* first stop the SONIC... */
|
|
StopSONIC(dev);
|
|
/* ...then reinit it with the new flags */
|
|
InitBoard(dev);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* hardware check
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
static int ibmlana_irq;
|
|
static int ibmlana_io;
|
|
static int startslot; /* counts through slots when probing multiple devices */
|
|
|
|
static const short ibmlana_adapter_ids[] __devinitconst = {
|
|
IBM_LANA_ID,
|
|
0x0000
|
|
};
|
|
|
|
static const char *const ibmlana_adapter_names[] __devinitconst = {
|
|
"IBM LAN Adapter/A",
|
|
NULL
|
|
};
|
|
|
|
|
|
static const struct net_device_ops ibmlana_netdev_ops = {
|
|
.ndo_open = ibmlana_open,
|
|
.ndo_stop = ibmlana_close,
|
|
.ndo_start_xmit = ibmlana_tx,
|
|
.ndo_set_multicast_list = ibmlana_set_multicast_list,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static int __devinit ibmlana_init_one(struct device *kdev)
|
|
{
|
|
struct mca_device *mdev = to_mca_device(kdev);
|
|
struct net_device *dev;
|
|
int slot = mdev->slot, z, rc;
|
|
int base = 0, irq = 0, iobase = 0, memlen = 0;
|
|
ibmlana_priv *priv;
|
|
ibmlana_medium medium;
|
|
|
|
dev = alloc_etherdev(sizeof(ibmlana_priv));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->irq = ibmlana_irq;
|
|
dev->base_addr = ibmlana_io;
|
|
|
|
base = dev->mem_start;
|
|
irq = dev->irq;
|
|
|
|
/* deduce card addresses */
|
|
getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium);
|
|
|
|
/* were we looking for something different ? */
|
|
if (dev->irq && dev->irq != irq) {
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
if (dev->mem_start && dev->mem_start != base) {
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/* announce success */
|
|
printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1);
|
|
|
|
/* try to obtain I/O range */
|
|
if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) {
|
|
printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase);
|
|
startslot = slot + 1;
|
|
rc = -EBUSY;
|
|
goto err_out;
|
|
}
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->slot = slot;
|
|
priv->realirq = mca_device_transform_irq(mdev, irq);
|
|
priv->medium = medium;
|
|
spin_lock_init(&priv->lock);
|
|
|
|
/* set base + irq for this device (irq not allocated so far) */
|
|
|
|
dev->irq = 0;
|
|
dev->mem_start = base;
|
|
dev->mem_end = base + memlen;
|
|
dev->base_addr = iobase;
|
|
|
|
priv->base = ioremap(base, memlen);
|
|
if (!priv->base) {
|
|
printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME);
|
|
startslot = slot + 1;
|
|
rc = -EBUSY;
|
|
goto err_out_reg;
|
|
}
|
|
|
|
mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]);
|
|
mca_device_set_claim(mdev, 1);
|
|
|
|
/* set methods */
|
|
dev->netdev_ops = &ibmlana_netdev_ops;
|
|
dev->flags |= IFF_MULTICAST;
|
|
|
|
/* copy out MAC address */
|
|
|
|
for (z = 0; z < ETH_ALEN; z++)
|
|
dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z);
|
|
|
|
/* print config */
|
|
|
|
printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, "
|
|
"MAC address %pM.\n",
|
|
dev->name, priv->realirq, dev->base_addr,
|
|
dev->mem_start, dev->mem_end - 1,
|
|
dev->dev_addr);
|
|
printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]);
|
|
|
|
/* reset board */
|
|
|
|
ResetBoard(dev);
|
|
|
|
/* next probe will start at next slot */
|
|
|
|
startslot = slot + 1;
|
|
|
|
rc = register_netdev(dev);
|
|
if (rc)
|
|
goto err_out_claimed;
|
|
|
|
dev_set_drvdata(kdev, dev);
|
|
return 0;
|
|
|
|
err_out_claimed:
|
|
mca_device_set_claim(mdev, 0);
|
|
iounmap(priv->base);
|
|
err_out_reg:
|
|
release_region(iobase, IBM_LANA_IORANGE);
|
|
err_out:
|
|
free_netdev(dev);
|
|
return rc;
|
|
}
|
|
|
|
static int ibmlana_remove_one(struct device *kdev)
|
|
{
|
|
struct mca_device *mdev = to_mca_device(kdev);
|
|
struct net_device *dev = dev_get_drvdata(kdev);
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
/*DeinitBoard(dev); */
|
|
release_region(dev->base_addr, IBM_LANA_IORANGE);
|
|
mca_device_set_claim(mdev, 0);
|
|
iounmap(priv->base);
|
|
free_netdev(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* modularization support
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
module_param_named(irq, ibmlana_irq, int, 0);
|
|
module_param_named(io, ibmlana_io, int, 0);
|
|
MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number");
|
|
MODULE_PARM_DESC(io, "IBM LAN/A I/O base address");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct mca_driver ibmlana_driver = {
|
|
.id_table = ibmlana_adapter_ids,
|
|
.driver = {
|
|
.name = "ibmlana",
|
|
.bus = &mca_bus_type,
|
|
.probe = ibmlana_init_one,
|
|
.remove = ibmlana_remove_one,
|
|
},
|
|
};
|
|
|
|
static int __init ibmlana_init_module(void)
|
|
{
|
|
return mca_register_driver(&ibmlana_driver);
|
|
}
|
|
|
|
static void __exit ibmlana_cleanup_module(void)
|
|
{
|
|
mca_unregister_driver(&ibmlana_driver);
|
|
}
|
|
|
|
module_init(ibmlana_init_module);
|
|
module_exit(ibmlana_cleanup_module);
|