50 строки
1.7 KiB
Plaintext
50 строки
1.7 KiB
Plaintext
* GPIO driven matrix keypad device tree bindings
|
|
|
|
GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
|
|
The matrix keypad supports multiple row and column lines, a key can be
|
|
placed at each intersection of a unique row and a unique column. The matrix
|
|
keypad can sense a key-press and key-release by means of GPIO lines and
|
|
report the event using GPIO interrupts to the cpu.
|
|
|
|
Required Properties:
|
|
- compatible: Should be "gpio-matrix-keypad"
|
|
- row-gpios: List of gpios used as row lines. The gpio specifier
|
|
for this property depends on the gpio controller to
|
|
which these row lines are connected.
|
|
- col-gpios: List of gpios used as column lines. The gpio specifier
|
|
for this property depends on the gpio controller to
|
|
which these column lines are connected.
|
|
- linux,keymap: The definition can be found at
|
|
bindings/input/matrix-keymap.txt
|
|
|
|
Optional Properties:
|
|
- linux,no-autorepeat: do no enable autorepeat feature.
|
|
- wakeup-source: use any event on keypad as wakeup event.
|
|
(Legacy property supported: "linux,wakeup")
|
|
- debounce-delay-ms: debounce interval in milliseconds
|
|
- col-scan-delay-us: delay, measured in microseconds, that is needed
|
|
before we can scan keypad after activating column gpio
|
|
- drive-inactive-cols: drive inactive columns during scan,
|
|
default is to turn inactive columns into inputs.
|
|
|
|
Example:
|
|
matrix-keypad {
|
|
compatible = "gpio-matrix-keypad";
|
|
debounce-delay-ms = <5>;
|
|
col-scan-delay-us = <2>;
|
|
|
|
row-gpios = <&gpio2 25 0
|
|
&gpio2 26 0
|
|
&gpio2 27 0>;
|
|
|
|
col-gpios = <&gpio2 21 0
|
|
&gpio2 22 0>;
|
|
|
|
linux,keymap = <0x0000008B
|
|
0x0100009E
|
|
0x02000069
|
|
0x0001006A
|
|
0x0101001C
|
|
0x0201006C>;
|
|
};
|