WSL2-Linux-Kernel/drivers/w1/slaves
Ben Sen 0a19f129d7 w1: add ability to set (SRAM) and store (EEPROM) configuration for temp sensors like DS18B20
Since many temperature sensors come "preconfigured" with a lower
precision, people are stuck at that precision when running on a kernel
based device (unlike the Dallas 1Wire library for e.g. Arduino, which
supports writing the configuration/scratchpad). This patch adds write
support for the scratchpad/precision registers via w1_slave sysfs.

Signed-off-by: Ben Sen <0.x29a.0@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:37:49 -07:00
..
Kconfig w1: select crc16 library for ds2406 2014-06-23 12:38:08 -04:00
Makefile w1: new w1_ds2406 driver 2014-06-19 17:45:14 -07:00
w1_bq27000.c power: bq27xxx_battery: Platform initialization must declare a device 2015-09-23 16:23:12 +02:00
w1_ds28e04.c
w1_ds2406.c w1: new w1_ds2406 driver 2014-06-19 17:45:14 -07:00
w1_ds2408.c
w1_ds2413.c
w1_ds2423.c
w1_ds2431.c
w1_ds2433.c
w1_ds2760.c w1/slaves: use pr_* instead of printk 2014-06-19 17:46:51 -07:00
w1_ds2760.h
w1_ds2780.c
w1_ds2780.h
w1_ds2781.c
w1_ds2781.h
w1_smem.c
w1_therm.c w1: add ability to set (SRAM) and store (EEPROM) configuration for temp sensors like DS18B20 2016-05-01 14:37:49 -07:00